We are seeking a skilled Electrically Biased Rotating Equipment Technician to join our dynamic team. The successful candidate will primarily work in well-equipped workshop, with occasional site visits to local customer facilities for service, repair, or commissioning work. Duties will Include: - Diagnosis, repair, overhaul, and testing of rotating equipment including: Electric motors (AC/DC) Gearboxes Pumps (centrifugal, submersible, etc.) Fans and blowers Transformers (basic inspection and testing) - Electrical fault finding, motor refurbishment, and dynamic balancing. - Occasional on-site work for installation, maintenance, or emergency repairs. - Completing service reports and maintaining accurate job documentation. - Ensuring health & safety and quality standards are maintained at all times. Skills and Experience: - Proven hands-on experience working with rotating electrical and mechanical equipment. - Strong electrical bias with the ability to interpret electrical drawings and carry out fault diagnosis. - Competence in motor refurbishment, testing (e.g., insulation resistance, surge, and mechanical strip-down. - Experience using test equipment such as megohmmeters, multimeters, and vibration analysis tools. - Mechanical understanding of alignment, fitting bearings, seals, shafts, and coupling systems. - Ideally qualified to NVQ Level 3 / City & Guilds / ONC or equivalent in Electrical or Electro-Mechanical Engineering. Hours of work are 40 hours Mon- Fri 08.00 -16.30 day shift with occasional overtime or weekend work during busy periods. The role comes with a very competitive starting rate of 18.17 per hour together with company pension, death in service benefit and 4 weeks holiday (increasing to 5 weeks after 2 years) + bank holidays.
Dec 07, 2025
Full time
We are seeking a skilled Electrically Biased Rotating Equipment Technician to join our dynamic team. The successful candidate will primarily work in well-equipped workshop, with occasional site visits to local customer facilities for service, repair, or commissioning work. Duties will Include: - Diagnosis, repair, overhaul, and testing of rotating equipment including: Electric motors (AC/DC) Gearboxes Pumps (centrifugal, submersible, etc.) Fans and blowers Transformers (basic inspection and testing) - Electrical fault finding, motor refurbishment, and dynamic balancing. - Occasional on-site work for installation, maintenance, or emergency repairs. - Completing service reports and maintaining accurate job documentation. - Ensuring health & safety and quality standards are maintained at all times. Skills and Experience: - Proven hands-on experience working with rotating electrical and mechanical equipment. - Strong electrical bias with the ability to interpret electrical drawings and carry out fault diagnosis. - Competence in motor refurbishment, testing (e.g., insulation resistance, surge, and mechanical strip-down. - Experience using test equipment such as megohmmeters, multimeters, and vibration analysis tools. - Mechanical understanding of alignment, fitting bearings, seals, shafts, and coupling systems. - Ideally qualified to NVQ Level 3 / City & Guilds / ONC or equivalent in Electrical or Electro-Mechanical Engineering. Hours of work are 40 hours Mon- Fri 08.00 -16.30 day shift with occasional overtime or weekend work during busy periods. The role comes with a very competitive starting rate of 18.17 per hour together with company pension, death in service benefit and 4 weeks holiday (increasing to 5 weeks after 2 years) + bank holidays.
Teknikal Specialist Recruitment are recruiting for a Maintenance Technician with an Electronics Bias. £45,000 DOE + Bonus + Private Healthcare + Profit Share Bedford (Ampthill area) Double Day Shift Further Education Support Award-Winning Employer What s In It for You?: Salary up to £45,000 DOE Profit share bonus scheme (up to 8%) Private healthcare package Financial support for further education 24 days holiday + bank holidays Gym and cinema discounts Ongoing technical and professional training Clear route for career development Double Days shift: Mon Fri (6am 2pm / 2pm 10pm) No weekend work The Role: Our client, a respected leader in precision components and advanced technology, is seeking a Maintenance Technician with an electronics bias to join their Bedfordshire facility. This role is ideal for someone experienced in electronic fault-finding who is keen to work in a cleanroom environment on a variety of high-spec equipment. You will be responsible for conducting preventative maintenance, diagnosing, and repairing electronic faults, and supporting production efficiency across electrical, electronic and some mechanical systems. You ll also play a part in stock management, process improvement, and ensuring high safety standards. What You ll Need: Apprenticeship or Level 3 qualification in Electronics or Electrical Engineering Experience working in a cleanroom or wafer fabrication setting (preferred) Strong skills in PCB fault-finding, soldering, and working with motors/control panels Ability to read electrical/electronic schematics Confident working with PPE and chemicals A proactive, team-oriented approach and willingness to learn This is a rare opportunity to join a growing business that invests in its people. APPLY NOW to take the next step in your maintenance engineering career. REFER A FRIEND AND GET UP-TO £250! Call me to find out how it works
Dec 07, 2025
Full time
Teknikal Specialist Recruitment are recruiting for a Maintenance Technician with an Electronics Bias. £45,000 DOE + Bonus + Private Healthcare + Profit Share Bedford (Ampthill area) Double Day Shift Further Education Support Award-Winning Employer What s In It for You?: Salary up to £45,000 DOE Profit share bonus scheme (up to 8%) Private healthcare package Financial support for further education 24 days holiday + bank holidays Gym and cinema discounts Ongoing technical and professional training Clear route for career development Double Days shift: Mon Fri (6am 2pm / 2pm 10pm) No weekend work The Role: Our client, a respected leader in precision components and advanced technology, is seeking a Maintenance Technician with an electronics bias to join their Bedfordshire facility. This role is ideal for someone experienced in electronic fault-finding who is keen to work in a cleanroom environment on a variety of high-spec equipment. You will be responsible for conducting preventative maintenance, diagnosing, and repairing electronic faults, and supporting production efficiency across electrical, electronic and some mechanical systems. You ll also play a part in stock management, process improvement, and ensuring high safety standards. What You ll Need: Apprenticeship or Level 3 qualification in Electronics or Electrical Engineering Experience working in a cleanroom or wafer fabrication setting (preferred) Strong skills in PCB fault-finding, soldering, and working with motors/control panels Ability to read electrical/electronic schematics Confident working with PPE and chemicals A proactive, team-oriented approach and willingness to learn This is a rare opportunity to join a growing business that invests in its people. APPLY NOW to take the next step in your maintenance engineering career. REFER A FRIEND AND GET UP-TO £250! Call me to find out how it works
Questech are recruiting on behalf of our client in Wakefield, West Yorkshire. This client are a fast paced Production facility. The Person: Worked as a Electrical Maintenance Engineer / Mechanical Maintenance Engineer / Maintenance Technician / Multi skilled Engineer NVQ Level 3 trained Trustworthy, Motivated, Problem Solver Experienced in a manufacturing environment Proficient written, numerical, and verbal skills Good computer skills and knowledge of Microsoft office family of products Experience of Maintenance Management Systems & software. The Role: Reactive maintenance - Reacting to breakdowns to ensure production is back running as quick and safely as possible. Attend breakdowns promptly and make repairs to the best quality Complete regular machine maintenance programmes to reduce packing downtime and complete relevant paperwork. Project Work (CI / Installation / New Machinery commissioning.) Planned Preventative Maintenance: Ensure planned maintenance is carried out in line with the site schedule. Liaising with other departments to ensure tasks are completed with little to no impact on operations. Manage Health and Safety: Ensure all engineering work carried out in the value stream meets the requirements of Quality, Safety, Health & Environment policies & procedures. This role is working a rotating shift Pattern of: 06:00am - 14:00pm and 14:00pm - 22:00pm (The pattern will rotate through some weekends) The salary will be between 49.000pa - 50,000pa For more information regarding this position contact: Laura Riding Questech Recruitment.
Dec 06, 2025
Full time
Questech are recruiting on behalf of our client in Wakefield, West Yorkshire. This client are a fast paced Production facility. The Person: Worked as a Electrical Maintenance Engineer / Mechanical Maintenance Engineer / Maintenance Technician / Multi skilled Engineer NVQ Level 3 trained Trustworthy, Motivated, Problem Solver Experienced in a manufacturing environment Proficient written, numerical, and verbal skills Good computer skills and knowledge of Microsoft office family of products Experience of Maintenance Management Systems & software. The Role: Reactive maintenance - Reacting to breakdowns to ensure production is back running as quick and safely as possible. Attend breakdowns promptly and make repairs to the best quality Complete regular machine maintenance programmes to reduce packing downtime and complete relevant paperwork. Project Work (CI / Installation / New Machinery commissioning.) Planned Preventative Maintenance: Ensure planned maintenance is carried out in line with the site schedule. Liaising with other departments to ensure tasks are completed with little to no impact on operations. Manage Health and Safety: Ensure all engineering work carried out in the value stream meets the requirements of Quality, Safety, Health & Environment policies & procedures. This role is working a rotating shift Pattern of: 06:00am - 14:00pm and 14:00pm - 22:00pm (The pattern will rotate through some weekends) The salary will be between 49.000pa - 50,000pa For more information regarding this position contact: Laura Riding Questech Recruitment.
We offer our mechanics: £40,000 - £50,000 DOE plus benefits Additional opportunity to earn up to £9,000 every three years in performance bonuses(terms and conditions apply) All overtime paid at time and a half Wakefield Motorstore Starting from 33 days annual leave (with room to grow) Flexible hours Toolbox cover Training provided to become an EV accredited Technician Generous employee discounts Opportunities to review salary yearly Private healthcare and sick-pay cover Maternity and paternity packages Mechanics, we couldn't do it without you As a mechanic, you'll safely prepare our customers' cars for the road ahead. You'll care about every detail and take pride in doing a meticulous job. Above all, you'll want to be part of a capable, motivated team who feel the same way. You'll get the chance to work on an incredible range of manufacturers and models, developing your skills and staying up to date with the very latest in vehicle technology. Essential skills A certificate in Light Vehicle Maintenance Level 3 and solid work experience in the automotive industry The ability to work in a competent and efficient manner on your own or part of a busy team Strong communication skills Good attention to detail The ability to carry out work to high standards and to deadlines A proactive and enthusiastic approach The ability to accurately follow written and spoken instructions A full driving licence Day-to-day duties Carrying out servicing, repairs and maintenance to high standards Inspecting vehicle engine and mechanical/electrical components to diagnose issues accurately, using computer-based diagnostic equipment Repairing or replacing broken or defective parts Carrying out DVSA vehicle testing (if authorised) Road testing vehicles to check repairs Maintaining equipment and making sure tools are in good condition. Following checklists to ensure all procedures are completed Completing all documentation to the required standard Our Culture Arnold Clark is committed to creating a diverse and inclusive workplace. We strive to create an environment where collaboration, unique perspectives and multiple approaches are celebrated. We care about our employees and our communities, we nurture talent and encourage ambition, and we are passionate about people who take pride in their work. Our employees are at the heart of everything we do - diverse in our make-up, united in our goals. To find out more about Life at Arnold Clark , visit our website. Employment within the Arnold Clark Group is offered subject to satisfactory reference and disclosure check. JBRP1_UKTJ
Dec 05, 2025
Full time
We offer our mechanics: £40,000 - £50,000 DOE plus benefits Additional opportunity to earn up to £9,000 every three years in performance bonuses(terms and conditions apply) All overtime paid at time and a half Wakefield Motorstore Starting from 33 days annual leave (with room to grow) Flexible hours Toolbox cover Training provided to become an EV accredited Technician Generous employee discounts Opportunities to review salary yearly Private healthcare and sick-pay cover Maternity and paternity packages Mechanics, we couldn't do it without you As a mechanic, you'll safely prepare our customers' cars for the road ahead. You'll care about every detail and take pride in doing a meticulous job. Above all, you'll want to be part of a capable, motivated team who feel the same way. You'll get the chance to work on an incredible range of manufacturers and models, developing your skills and staying up to date with the very latest in vehicle technology. Essential skills A certificate in Light Vehicle Maintenance Level 3 and solid work experience in the automotive industry The ability to work in a competent and efficient manner on your own or part of a busy team Strong communication skills Good attention to detail The ability to carry out work to high standards and to deadlines A proactive and enthusiastic approach The ability to accurately follow written and spoken instructions A full driving licence Day-to-day duties Carrying out servicing, repairs and maintenance to high standards Inspecting vehicle engine and mechanical/electrical components to diagnose issues accurately, using computer-based diagnostic equipment Repairing or replacing broken or defective parts Carrying out DVSA vehicle testing (if authorised) Road testing vehicles to check repairs Maintaining equipment and making sure tools are in good condition. Following checklists to ensure all procedures are completed Completing all documentation to the required standard Our Culture Arnold Clark is committed to creating a diverse and inclusive workplace. We strive to create an environment where collaboration, unique perspectives and multiple approaches are celebrated. We care about our employees and our communities, we nurture talent and encourage ambition, and we are passionate about people who take pride in their work. Our employees are at the heart of everything we do - diverse in our make-up, united in our goals. To find out more about Life at Arnold Clark , visit our website. Employment within the Arnold Clark Group is offered subject to satisfactory reference and disclosure check. JBRP1_UKTJ
Position: Plant Technician Location: Featherstone Salary: up to £38,220.00 Working hours 37 per week 7:0 am to 03:00 pm Benefits: flex start and finish, 38 days of holidays, 14 % pension, subsidised travel, employee assistance program, employee discounts, health cash plan, ongoing training. We are now seeking to recruit a Plant Technician to work in new workshop in Featherstone to support current fleet of plant technicians The appropriate candidate would be responsible for service the fleet of the mixture of cars, minibuses, lorries and vans. Responsibilities: Support the Workshop Controllers to maintain the standards of road worthiness and mechanical safety for the fleet of the mixture of cars, minibuses, lorries and vans. Using specialised recovery equipment Vehicle mounted crane and tail lift operations and repairs Carry out the statutory inspection, maintenance and repair to vehicles, plant and equipment Carry out roadworthiness and safety checks and maintenance of hired vehicles. Ensure all electronic records, paperwork, forms, inspection sheets, defect notes and photographic evidence are completed accurately and recorded as required. To mechanically diagnose faults and decide on the most economical method of repair while having regard to appropriate quality and legal standards. Requirements: NVQ 3 Award in the Diagnosis, Testing and Repair of Electric/Hybrid Vehicles and Components. BTEC Technicians or NVQ level 3 in appropriate study An abrasive wheel licence (grinding) An overhead crane license Previous plat service and repair experience Advanced Computer literacy; including the effective use of vehicle & plant diagnostic equipment and vehicle-based technology If this role might be of an interest, please contact Marta Kosno (phone number removed) and forward your CV to (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Dec 05, 2025
Full time
Position: Plant Technician Location: Featherstone Salary: up to £38,220.00 Working hours 37 per week 7:0 am to 03:00 pm Benefits: flex start and finish, 38 days of holidays, 14 % pension, subsidised travel, employee assistance program, employee discounts, health cash plan, ongoing training. We are now seeking to recruit a Plant Technician to work in new workshop in Featherstone to support current fleet of plant technicians The appropriate candidate would be responsible for service the fleet of the mixture of cars, minibuses, lorries and vans. Responsibilities: Support the Workshop Controllers to maintain the standards of road worthiness and mechanical safety for the fleet of the mixture of cars, minibuses, lorries and vans. Using specialised recovery equipment Vehicle mounted crane and tail lift operations and repairs Carry out the statutory inspection, maintenance and repair to vehicles, plant and equipment Carry out roadworthiness and safety checks and maintenance of hired vehicles. Ensure all electronic records, paperwork, forms, inspection sheets, defect notes and photographic evidence are completed accurately and recorded as required. To mechanically diagnose faults and decide on the most economical method of repair while having regard to appropriate quality and legal standards. Requirements: NVQ 3 Award in the Diagnosis, Testing and Repair of Electric/Hybrid Vehicles and Components. BTEC Technicians or NVQ level 3 in appropriate study An abrasive wheel licence (grinding) An overhead crane license Previous plat service and repair experience Advanced Computer literacy; including the effective use of vehicle & plant diagnostic equipment and vehicle-based technology If this role might be of an interest, please contact Marta Kosno (phone number removed) and forward your CV to (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
Dec 05, 2025
Contractor
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
Mechanical Technican Defence Staffordshire Role Overview In this role, you will support the development, maintenance, and improvement of engineering designs across varied projects. You ll gain hands-on exposure to multiple engineering disciplines, giving you the opportunity to explore different areas of the business and develop towards a long-term career pathway within the organisation. Key Responsibilities Work closely with engineers and project teams to help deliver successful project outcomes Support a range of engineering activities under guidance from senior staff, including: Preparing method statements Creating test specifications Implementing engineering change requests Assisting with change management processes Updating technical drawings Occasional on-site support work Participate in internal and external meetings and contribute ideas to support the organisation s ongoing development What You ll Bring: Essential . Confident communicator capable of collaborating across engineering and wider business teams. Strong team orientation and willingness to support colleagues Ability to learn quickly and adapt to varied engineering tasks and challenges. Methodical, accurate, and diligent approach with strong organisational skills. Capable of organising and prioritising personal work under high-level direction. Ability to communicate effectively with internal stakeholders, suppliers, and customers Desirable Understanding of mechanical engineering principles. Experience with engineering design tools such as SolidWorks. Motivation to progress into a specialist or supervisory position as your career develops
Dec 05, 2025
Full time
Mechanical Technican Defence Staffordshire Role Overview In this role, you will support the development, maintenance, and improvement of engineering designs across varied projects. You ll gain hands-on exposure to multiple engineering disciplines, giving you the opportunity to explore different areas of the business and develop towards a long-term career pathway within the organisation. Key Responsibilities Work closely with engineers and project teams to help deliver successful project outcomes Support a range of engineering activities under guidance from senior staff, including: Preparing method statements Creating test specifications Implementing engineering change requests Assisting with change management processes Updating technical drawings Occasional on-site support work Participate in internal and external meetings and contribute ideas to support the organisation s ongoing development What You ll Bring: Essential . Confident communicator capable of collaborating across engineering and wider business teams. Strong team orientation and willingness to support colleagues Ability to learn quickly and adapt to varied engineering tasks and challenges. Methodical, accurate, and diligent approach with strong organisational skills. Capable of organising and prioritising personal work under high-level direction. Ability to communicate effectively with internal stakeholders, suppliers, and customers Desirable Understanding of mechanical engineering principles. Experience with engineering design tools such as SolidWorks. Motivation to progress into a specialist or supervisory position as your career develops
Manufacturing Technician 12 month contract Based in Henlow Offering 29.70ph Inside IR35 Do you have Mechanical fitting/maintenance experience? Do you hold a completed apprenticeship or NVQ Level 3? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Technician, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Certify the product in line with the product certification procedure Maintain product certification and approval via regular audits Conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle Ensure manufacturing build, inspection, and test times are met Check and complete all paperwork associated with the manufacturing data pack Your skillset may include: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Experience in a Manufacturing / Craftsman position. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Manufacturing Technician 12 month contract Based in Henlow Offering 29.70ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Dec 05, 2025
Contractor
Manufacturing Technician 12 month contract Based in Henlow Offering 29.70ph Inside IR35 Do you have Mechanical fitting/maintenance experience? Do you hold a completed apprenticeship or NVQ Level 3? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Technician, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Certify the product in line with the product certification procedure Maintain product certification and approval via regular audits Conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle Ensure manufacturing build, inspection, and test times are met Check and complete all paperwork associated with the manufacturing data pack Your skillset may include: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Experience in a Manufacturing / Craftsman position. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Manufacturing Technician 12 month contract Based in Henlow Offering 29.70ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
About the Role: We are looking for a skilled Mechanical Maintenance Technician to join our team and play a key role in keeping our equipment running safely, efficiently, and reliably. From fork lift trucks and cranes to trailers, portable generators, Manitou Rotary Telehandlers, and Charlatte tow trucks, you'll ensure our diverse fleet of machinery is maintained to the highest standards. You'll work both independently and as part of a close-knit team, carrying out planned and reactive maintenance , fault finding, repairs, and testing on mechanical systems, plant, and machinery. With a strong understanding of KPIs, you'll ensure all tasks are completed efficiently and to professional standards. What You'll Be Doing: Conducting planned and reactive maintenance on a wide range of mechanical equipment. Fault finding, diagnosing, and repairing machinery including fork lift trucks, cranes, and plant machinery. Producing clear, detailed reports to support maintenance work. Working safely with technical specifications and following safe systems of work. Communicating progress, issues, and updates effectively with your Team Leader. Participating in a rostered on-call team for out-of-hours support as required. What You'll Bring: A strong background in mechanical engineering, either through a mechanical apprenticeship or equivalent hands-on experience. Industry-recognised qualifications or working towards them, e.g., NVQ or City & Guilds . Proficiency with hand tools and mechanical equipment, with confidence in fault finding and rectification. Experience working to KPIs and managing tasks efficiently via mobile applications or digital systems. Strong understanding of safe systems of work and health & safety practices. Excellent communication and customer interaction skills, with a professional, adaptable approach. What We Offer: Competitive salary 25 days holiday plus bank holidays Enhanced pension scheme Life assurance Access to internal benefits and discount programmes Cycle to work scheme Group income protection Flexible parental benefits (if applicable) Employee assistance programme Continued professional development opportunities Recognition through internal achievements scheme Occupational health and wellbeing support 50% off entry to the Historic Dockyard If you're passionate about mechanical maintenance, enjoy a varied and hands-on role, and want to be part of a supportive, professional team, we'd love to hear from you. Apply today to join our team!
Dec 05, 2025
Full time
About the Role: We are looking for a skilled Mechanical Maintenance Technician to join our team and play a key role in keeping our equipment running safely, efficiently, and reliably. From fork lift trucks and cranes to trailers, portable generators, Manitou Rotary Telehandlers, and Charlatte tow trucks, you'll ensure our diverse fleet of machinery is maintained to the highest standards. You'll work both independently and as part of a close-knit team, carrying out planned and reactive maintenance , fault finding, repairs, and testing on mechanical systems, plant, and machinery. With a strong understanding of KPIs, you'll ensure all tasks are completed efficiently and to professional standards. What You'll Be Doing: Conducting planned and reactive maintenance on a wide range of mechanical equipment. Fault finding, diagnosing, and repairing machinery including fork lift trucks, cranes, and plant machinery. Producing clear, detailed reports to support maintenance work. Working safely with technical specifications and following safe systems of work. Communicating progress, issues, and updates effectively with your Team Leader. Participating in a rostered on-call team for out-of-hours support as required. What You'll Bring: A strong background in mechanical engineering, either through a mechanical apprenticeship or equivalent hands-on experience. Industry-recognised qualifications or working towards them, e.g., NVQ or City & Guilds . Proficiency with hand tools and mechanical equipment, with confidence in fault finding and rectification. Experience working to KPIs and managing tasks efficiently via mobile applications or digital systems. Strong understanding of safe systems of work and health & safety practices. Excellent communication and customer interaction skills, with a professional, adaptable approach. What We Offer: Competitive salary 25 days holiday plus bank holidays Enhanced pension scheme Life assurance Access to internal benefits and discount programmes Cycle to work scheme Group income protection Flexible parental benefits (if applicable) Employee assistance programme Continued professional development opportunities Recognition through internal achievements scheme Occupational health and wellbeing support 50% off entry to the Historic Dockyard If you're passionate about mechanical maintenance, enjoy a varied and hands-on role, and want to be part of a supportive, professional team, we'd love to hear from you. Apply today to join our team!
Aircraft Engineering Supervisors (Mechanical and Avionics) Wildcat Competitive salary plus benefits Full time/Permanent - 38 or 40 hours per week contracts available, working day shifts Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. About the Role: Are you an experienced aircraft engineering professional with a strong background in rotary military aviation? Our client is seeking dedicated and skilled Supervisors to join their team supporting the Wildcat Maritime Force at RNAS Yeovilton. This is a key role within our client's Defence division, providing essential maintenance and operational support to 815 and 825 Naval Air Squadrons. As a Supervisor, you will coordinate and oversee daily engineering activities, ensuring compliance with MOD, RN, and our client's standards. You'll play a vital part in maintaining aircraft airworthiness, mentoring technicians, and driving continuous improvement in a highly regulated environment. The Ideal Candidate: Experience: Previous working experiemce on Wildcat/Lynx or rotary military aircraft within the last 24 months. Previous supervisory experience in aircraft engineering. Skills: Strong leadership and team management capabilities. Excellent understanding of Wildcat aircraft systems and support equipment. Proficient in Health & Safety, COSHH, and quality assurance practices. Skilled in project planning, lean operations, and engineering asset management systems. Effective communicator with a collaborative approach to stakeholder engagement. Qualifications: Service Certificate of Competency (CoC) or ability to complete CoC Supervisory Management and Aircraft Documentation Course within 3 months. Completed or able to complete a Maintenance Human Factors Course. Thorough understanding of MAOS Military Regulations Part 145 and rotary wing military aviation procedures. Key Responsibilities: Supervise and allocate daily workloads for engineering teams. Ensure all contracted tasks are completed in line with MOD/RN and Our client policies. Conduct inspections and provide second signature authorisation within trade group. Support training, mentoring, and development of team members. Monitor and report safety, quality, and compliance issues. Promote continuous improvement and innovation in service delivery. Maintain operational performance and regulatory compliance. Represent our client professionally in all internal and external interactions. Apply Now. Join a team that values professionalism, safety, and operational excellence. Submit your application today and contribute to our client's mission in supporting the Royal Navy's Wildcat Maritime Force.
Dec 05, 2025
Full time
Aircraft Engineering Supervisors (Mechanical and Avionics) Wildcat Competitive salary plus benefits Full time/Permanent - 38 or 40 hours per week contracts available, working day shifts Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. About the Role: Are you an experienced aircraft engineering professional with a strong background in rotary military aviation? Our client is seeking dedicated and skilled Supervisors to join their team supporting the Wildcat Maritime Force at RNAS Yeovilton. This is a key role within our client's Defence division, providing essential maintenance and operational support to 815 and 825 Naval Air Squadrons. As a Supervisor, you will coordinate and oversee daily engineering activities, ensuring compliance with MOD, RN, and our client's standards. You'll play a vital part in maintaining aircraft airworthiness, mentoring technicians, and driving continuous improvement in a highly regulated environment. The Ideal Candidate: Experience: Previous working experiemce on Wildcat/Lynx or rotary military aircraft within the last 24 months. Previous supervisory experience in aircraft engineering. Skills: Strong leadership and team management capabilities. Excellent understanding of Wildcat aircraft systems and support equipment. Proficient in Health & Safety, COSHH, and quality assurance practices. Skilled in project planning, lean operations, and engineering asset management systems. Effective communicator with a collaborative approach to stakeholder engagement. Qualifications: Service Certificate of Competency (CoC) or ability to complete CoC Supervisory Management and Aircraft Documentation Course within 3 months. Completed or able to complete a Maintenance Human Factors Course. Thorough understanding of MAOS Military Regulations Part 145 and rotary wing military aviation procedures. Key Responsibilities: Supervise and allocate daily workloads for engineering teams. Ensure all contracted tasks are completed in line with MOD/RN and Our client policies. Conduct inspections and provide second signature authorisation within trade group. Support training, mentoring, and development of team members. Monitor and report safety, quality, and compliance issues. Promote continuous improvement and innovation in service delivery. Maintain operational performance and regulatory compliance. Represent our client professionally in all internal and external interactions. Apply Now. Join a team that values professionalism, safety, and operational excellence. Submit your application today and contribute to our client's mission in supporting the Royal Navy's Wildcat Maritime Force.
Mechanical Maintenance Fitter Our client is currently looking for experienced Mechanical Fitters / Maintenance Technicians to work as part of a team, covering mechanical maintenance activities on their customer's site in Erith. Must have experience with mechanical maintenance in a manufacturing or process environment. NVQ level 3 / City and Guilds Level 3, or similar in a mechanical engineering discipline required. Hours of Work: 7am to 4pm, Monday to Friday (42.5 hours paid basic) Overtime available to suit the site needs Job Location: Erith Rate: Up to £20/hour (depending on experience) Call out rates and overtime available Key Responsibilities: Working as part of a team to provide planned preventative maintenance in accordance with site schedules Carry out fault finding and mechanical repairs during breakdown situations Work to safe systems of work and other documentation provided and always with yours and other s safety in mind Communicate effectively with other team members Identify the correct equipment required for each task and utilise that equipment safely Key Individual Skills and Attributes: Be organised, adaptable and flexible in your approach to work Work safely paying attention to detail A positive, can-do attitude and problem-solving skills Excellent time keeping and attendance Energy and enthusiasm for the role
Dec 05, 2025
Full time
Mechanical Maintenance Fitter Our client is currently looking for experienced Mechanical Fitters / Maintenance Technicians to work as part of a team, covering mechanical maintenance activities on their customer's site in Erith. Must have experience with mechanical maintenance in a manufacturing or process environment. NVQ level 3 / City and Guilds Level 3, or similar in a mechanical engineering discipline required. Hours of Work: 7am to 4pm, Monday to Friday (42.5 hours paid basic) Overtime available to suit the site needs Job Location: Erith Rate: Up to £20/hour (depending on experience) Call out rates and overtime available Key Responsibilities: Working as part of a team to provide planned preventative maintenance in accordance with site schedules Carry out fault finding and mechanical repairs during breakdown situations Work to safe systems of work and other documentation provided and always with yours and other s safety in mind Communicate effectively with other team members Identify the correct equipment required for each task and utilise that equipment safely Key Individual Skills and Attributes: Be organised, adaptable and flexible in your approach to work Work safely paying attention to detail A positive, can-do attitude and problem-solving skills Excellent time keeping and attendance Energy and enthusiasm for the role
STRATEGIC RESOURCES EUROPEAN RECRUITMENT CONSULTANTS LTD
Barrow-in-furness, Cumbria
MECHANICAL TECHNICIAN Our client is seeking an experienced Mechanical Technician to be based onshore at Barrow-In-Furness for a PAYE contract role starting asap until the end of January 2026. The successful candidate would have to reside within travelling distance of Barrow-In-Furness. OVERVIEW: To undertake routine and non-routine engineering maintenance and defect/responsive breakdown repair tasks that ensure the reliability and scheduled availability of operational plant and equipment associated with gas production/processing and condensate storage facilities. DIMENSIONS: Responsible for complex technical problem solving across 2 Gas Production and Condensate Storage Facilities with a Capital Plant value in excess of •550 million. Regularly oversee on-the-job training of trainees. Act as Performing Authority within the client's Safe Systems of Work Procedures. Supervise small teams of vendors. PRINCIPAL ACCOUNTABILITIES: To execute routine and non-routine maintenance activities efficiently to agreed processes/procedures and operational requirements. Investigates complex technical problems relating to critical plant, identifies solutions and acts to return plant to normal operating service with minimal supervision. Prepares and presents technical reports and maintains appropriate records of activities within recognised systems. Inspection and maintenance of Mechanical equipment in hazardous areas. Carries out commissioning and de-commissioning activities to meet planned plant operating programmes, organising and planning own and vendor work scopes. Liaise with operational/production staff and Technicians in other disciplines to ensure a safe and effective approach to tasks within the overall operational and maintenance programme. Trained to be competent in a range of activities ancillary to his/her core discipline. Supervises other staff and vendor/contractor employees in undertaking particular work activities. KEY SUCCESS FACTORS: HSE performance. Compliance to plan. Maintain defect and Planned Preventative Maintenance workload to plan Efficient use of spares and review of stock items Supervise and assist with key Vendor projects Complete the Standards of Competence program within a reasonable timescale HSE RESPONSIBILITIES Ensure that safe working practices and procedures are adhered to within his/her area of work and that appropriate permit to work is in place. Co-operates with line managers and supervisors in the prevention of work-related accidents and ill health, and the promotion of environmental good practise by acting with appropriate behaviour Adheres to health, safety and environmental instructions and procedures Reports unsafe practises, behaviours and equipment, and environmental concerns and incidents Ensures integrity of safety critical elements Supports a positive health, safety and environmental culture, offering improvement suggestions and participating in review of work practices and procedures Endeavours to apply good housekeeping in work areas Supports and participates in HS&E improvement initiatives Ensures correct PPE is worn for work activities Ensures correct use of tools and equipment Supports continuous improvement in environmental performance in adherence of the ISO14001 externally certified EMS KNOWLEDGE, SKILLS AND EXPERIENCE: Basic IT skills to operate appropriate software and hardware systems. It is a requirement of the job and given the inherent hazardous nature of the operating environment, that the job holder must undertake a range of specialist technical and safety training, including the use of self-contained breathing apparatus. Completed a recognised formal training programme or apprenticeship to achieve technician to craft status. Experience of the maintenance of high pressure process plant and equipment. A BTEC Higher National Certificate (HNC) or equivalent in an appropriate engineering subject. The job holder must have sound verbal and written communication skills and the basic IT skills to operate appropriate software and hardware systems. The job holder must have sufficient knowledge of procedures and be able to relate them to the work activities to ensure a safe approach and that appropriate permitry/controls are requested and in place. The job holder may also be trained to be competent in a range of activities ancillary to his/her core discipline such as crane operations, lifting and slinging, MJI10, MJI19 and Forklift Truck etc. to provide a range of skills available within the team in support of operational and maintenance activities. JOB CONTEXT/ENVIRONMENT: Reporting to the Mechanical Maintenance Team Lead, the job holder is one of a team of Technicians in his/her discipline and part of the overall Maintenance Section at Barrow Terminals. Being self motivated and under own supervision he/she will organise and plan routine/non-routine maintenance of complex operational plant and will also respond to plant and equipment failures without Technical guidance. The job holder will work under limited supervision that is directional rather that detailed. Therefore his/her daily workload requirements determine which procedures are appropriate and the planning of the execution of each specific task. The job holder operates within a day's system and is part of a maintenance team responsible for operations and commissioning of high pressure process plant and equipment. He/she is fully accountable for analysing, evaluating, reasoning and deciding on conclusions when responding to non-routine plant breakdowns, working under pressure to strict timescales which directly impacts on Production to nomination targets, environmental penalties leading to substantial loss of revenue. The job holder will undertake hands-on maintenance work but regularly need to supervise other staff and vendor/contractor personnel on-site from time to time. His/her technical expertise will enable him/her to take the lead in certain aspects of his/her discipline and investigate issues, preparing and presenting technical reports upon which engineering judgements will be made. WORKING RELATIONSHIPS: The Job holder must develop effective working relationships across a broad range of disciplines and levels. Primarily, these will comprise of Terminal Management, Peer groups, Discipline and Production Technicians, Production Support personnel, Offshore Operational and Maintenance personnel, core contract, vendors and ad hoc site labour. The job holder interaction with all these groups will involve production or plant status reports, HS&E issues, guidance and information dissemination when fault finding with a common goal of returning the plant to full service. Liaise with material suppliers to ensure correct identification of requirements. Liaise with external vendors/manufacturers to enable effective fault diagnosis and repair.
Dec 05, 2025
Contractor
MECHANICAL TECHNICIAN Our client is seeking an experienced Mechanical Technician to be based onshore at Barrow-In-Furness for a PAYE contract role starting asap until the end of January 2026. The successful candidate would have to reside within travelling distance of Barrow-In-Furness. OVERVIEW: To undertake routine and non-routine engineering maintenance and defect/responsive breakdown repair tasks that ensure the reliability and scheduled availability of operational plant and equipment associated with gas production/processing and condensate storage facilities. DIMENSIONS: Responsible for complex technical problem solving across 2 Gas Production and Condensate Storage Facilities with a Capital Plant value in excess of •550 million. Regularly oversee on-the-job training of trainees. Act as Performing Authority within the client's Safe Systems of Work Procedures. Supervise small teams of vendors. PRINCIPAL ACCOUNTABILITIES: To execute routine and non-routine maintenance activities efficiently to agreed processes/procedures and operational requirements. Investigates complex technical problems relating to critical plant, identifies solutions and acts to return plant to normal operating service with minimal supervision. Prepares and presents technical reports and maintains appropriate records of activities within recognised systems. Inspection and maintenance of Mechanical equipment in hazardous areas. Carries out commissioning and de-commissioning activities to meet planned plant operating programmes, organising and planning own and vendor work scopes. Liaise with operational/production staff and Technicians in other disciplines to ensure a safe and effective approach to tasks within the overall operational and maintenance programme. Trained to be competent in a range of activities ancillary to his/her core discipline. Supervises other staff and vendor/contractor employees in undertaking particular work activities. KEY SUCCESS FACTORS: HSE performance. Compliance to plan. Maintain defect and Planned Preventative Maintenance workload to plan Efficient use of spares and review of stock items Supervise and assist with key Vendor projects Complete the Standards of Competence program within a reasonable timescale HSE RESPONSIBILITIES Ensure that safe working practices and procedures are adhered to within his/her area of work and that appropriate permit to work is in place. Co-operates with line managers and supervisors in the prevention of work-related accidents and ill health, and the promotion of environmental good practise by acting with appropriate behaviour Adheres to health, safety and environmental instructions and procedures Reports unsafe practises, behaviours and equipment, and environmental concerns and incidents Ensures integrity of safety critical elements Supports a positive health, safety and environmental culture, offering improvement suggestions and participating in review of work practices and procedures Endeavours to apply good housekeeping in work areas Supports and participates in HS&E improvement initiatives Ensures correct PPE is worn for work activities Ensures correct use of tools and equipment Supports continuous improvement in environmental performance in adherence of the ISO14001 externally certified EMS KNOWLEDGE, SKILLS AND EXPERIENCE: Basic IT skills to operate appropriate software and hardware systems. It is a requirement of the job and given the inherent hazardous nature of the operating environment, that the job holder must undertake a range of specialist technical and safety training, including the use of self-contained breathing apparatus. Completed a recognised formal training programme or apprenticeship to achieve technician to craft status. Experience of the maintenance of high pressure process plant and equipment. A BTEC Higher National Certificate (HNC) or equivalent in an appropriate engineering subject. The job holder must have sound verbal and written communication skills and the basic IT skills to operate appropriate software and hardware systems. The job holder must have sufficient knowledge of procedures and be able to relate them to the work activities to ensure a safe approach and that appropriate permitry/controls are requested and in place. The job holder may also be trained to be competent in a range of activities ancillary to his/her core discipline such as crane operations, lifting and slinging, MJI10, MJI19 and Forklift Truck etc. to provide a range of skills available within the team in support of operational and maintenance activities. JOB CONTEXT/ENVIRONMENT: Reporting to the Mechanical Maintenance Team Lead, the job holder is one of a team of Technicians in his/her discipline and part of the overall Maintenance Section at Barrow Terminals. Being self motivated and under own supervision he/she will organise and plan routine/non-routine maintenance of complex operational plant and will also respond to plant and equipment failures without Technical guidance. The job holder will work under limited supervision that is directional rather that detailed. Therefore his/her daily workload requirements determine which procedures are appropriate and the planning of the execution of each specific task. The job holder operates within a day's system and is part of a maintenance team responsible for operations and commissioning of high pressure process plant and equipment. He/she is fully accountable for analysing, evaluating, reasoning and deciding on conclusions when responding to non-routine plant breakdowns, working under pressure to strict timescales which directly impacts on Production to nomination targets, environmental penalties leading to substantial loss of revenue. The job holder will undertake hands-on maintenance work but regularly need to supervise other staff and vendor/contractor personnel on-site from time to time. His/her technical expertise will enable him/her to take the lead in certain aspects of his/her discipline and investigate issues, preparing and presenting technical reports upon which engineering judgements will be made. WORKING RELATIONSHIPS: The Job holder must develop effective working relationships across a broad range of disciplines and levels. Primarily, these will comprise of Terminal Management, Peer groups, Discipline and Production Technicians, Production Support personnel, Offshore Operational and Maintenance personnel, core contract, vendors and ad hoc site labour. The job holder interaction with all these groups will involve production or plant status reports, HS&E issues, guidance and information dissemination when fault finding with a common goal of returning the plant to full service. Liaise with material suppliers to ensure correct identification of requirements. Liaise with external vendors/manufacturers to enable effective fault diagnosis and repair.
Field Service Technician Based at: Elland Service Centre Salary: £13 per hour Hours: Mon - Fri 08:00 - 16:30 Job purpose: To enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchairs to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering, collecting, repairing and servicing wheelchairs. The expectation is that once fully trained the majority of jobs will be completed on a first-time fix basis. Initially the workload will consist of manual wheelchairs but as more experience is gained and with further workshop training electric wheelchairs will also be included into your work schedule. Key Responsibilities: Delivering and collecting wheelchairs to and from service user's homes and NHS departments, always ensuring that the Company Infection Control Policy is followed. Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible. Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base. Ensure any PPE supplied for use in carrying out your duties is used as instructed. Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act. Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day. Ensure the vehicle safety check and van check sheet completed each week. Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is kept clean and always laundered. Prioritise and organise your workload, referring to Line Manager as and when appropriate. Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook. Agree to undertake all training offered that is necessary to maintain the skills required for this role. Willing to take on additional supervisory responsibilities and training if required. Skills and Qualifications: Full UK driving licence Successful enhanced DBS check General workshop knowledge Basic mechanical knowledge Basic electrical knowledge including 12v/24v D.C. systems. Able to move and handle loads and equipment safely. Experience of face-to-face customer contact. Previous delivery driver experience An awareness and understanding of people with disabilities. Flexible approach to working conditions and working environment change. Ability to use own initiative within set boundaries of the role. Ability to use a mobile phone to relay photographs. Good written and verbal communication skills. Ability to relay clear instructions to clients. Previous supervisory experience preferred. Physical demands of the job: Moving and handling of equipment and accessories following handling guidelines Standing at a bench to work Kneeling/crouching Working in confined workspace if the job necessitates (installing/repairing equipment in small areas). Use of ramps and any other agreed moving equipment. Most challenging/difficult part of the role: Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team. Committing to being available for short notice overtime necessitated by emergency response requirements. Responsibility of out of hour's duties. Health and safety: The post holder is required to take reasonable care for his/her own health and safety and that of other persons who may be affected by his/her acts or omissions. The post holder is also required to co-operate with supervisory and managerial staff to ensure that all relevant statutory regulations, policies, codes of practise and departmental safety procedures are adhered to, and to attend relevant training programmes. Prevention and Control of infection: The prevention and control of infection is an integral part of the role of all Ross Care personnel. Staff members will contribute to the prevention and control of infection through standard infection control practises and compliance with the Company infection control policy and use of PPE. Service user/other agency/public engagement and involvement: Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company's policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment. Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.
Dec 05, 2025
Full time
Field Service Technician Based at: Elland Service Centre Salary: £13 per hour Hours: Mon - Fri 08:00 - 16:30 Job purpose: To enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchairs to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering, collecting, repairing and servicing wheelchairs. The expectation is that once fully trained the majority of jobs will be completed on a first-time fix basis. Initially the workload will consist of manual wheelchairs but as more experience is gained and with further workshop training electric wheelchairs will also be included into your work schedule. Key Responsibilities: Delivering and collecting wheelchairs to and from service user's homes and NHS departments, always ensuring that the Company Infection Control Policy is followed. Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible. Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base. Ensure any PPE supplied for use in carrying out your duties is used as instructed. Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act. Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day. Ensure the vehicle safety check and van check sheet completed each week. Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is kept clean and always laundered. Prioritise and organise your workload, referring to Line Manager as and when appropriate. Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook. Agree to undertake all training offered that is necessary to maintain the skills required for this role. Willing to take on additional supervisory responsibilities and training if required. Skills and Qualifications: Full UK driving licence Successful enhanced DBS check General workshop knowledge Basic mechanical knowledge Basic electrical knowledge including 12v/24v D.C. systems. Able to move and handle loads and equipment safely. Experience of face-to-face customer contact. Previous delivery driver experience An awareness and understanding of people with disabilities. Flexible approach to working conditions and working environment change. Ability to use own initiative within set boundaries of the role. Ability to use a mobile phone to relay photographs. Good written and verbal communication skills. Ability to relay clear instructions to clients. Previous supervisory experience preferred. Physical demands of the job: Moving and handling of equipment and accessories following handling guidelines Standing at a bench to work Kneeling/crouching Working in confined workspace if the job necessitates (installing/repairing equipment in small areas). Use of ramps and any other agreed moving equipment. Most challenging/difficult part of the role: Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team. Committing to being available for short notice overtime necessitated by emergency response requirements. Responsibility of out of hour's duties. Health and safety: The post holder is required to take reasonable care for his/her own health and safety and that of other persons who may be affected by his/her acts or omissions. The post holder is also required to co-operate with supervisory and managerial staff to ensure that all relevant statutory regulations, policies, codes of practise and departmental safety procedures are adhered to, and to attend relevant training programmes. Prevention and Control of infection: The prevention and control of infection is an integral part of the role of all Ross Care personnel. Staff members will contribute to the prevention and control of infection through standard infection control practises and compliance with the Company infection control policy and use of PPE. Service user/other agency/public engagement and involvement: Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company's policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment. Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.
A Controls technician / Automation technician / Systems technician is required to join an industry leader in Florida. The successful Controls technician / Automation technician / Systems technician is responsible for installing, commissioning, troubleshooting, and maintaining building automation systems, applying practical expertise in HVAC controls and systems integration. Package $60,000 - $85,000 base salary Car allowance 401(k), Health, dental, life and vision insurance PTO Responsibilities Perform start-up, commissioning, and re-commissioning of DDC and building automation systems. Install, test, and calibrate control devices, sensors, and actuators used in HVAC and mechanical systems. Program, configure, and adjust control parameters, setpoints, trend logs, alarms, and graphics. Use laptops and diagnostic tools to troubleshoot and resolve field issues related to system communication, wiring, or programming. Maintain accurate documentation, including redline drawings, schematics, and system records. Coordinate with project engineers and field teams to deliver efficient, code-compliant installations. Integrate and verify control systems with third-party equipment and networks (e.g., BACnet, Modbus, LonWorks). Provide training and technical support to end users and facility staff on system operation and maintenance. Ensure compliance with safety protocols and complete all required pre-task planning and risk assessments. Manage daily assignments to ensure work is completed on schedule and within budget. Requirements Minimum of 3 years' hands-on experience with DDC systems installation, programming, commissioning, and troubleshooting. Strong understanding of HVAC system operation, control logic, and electrical schematics. Proficient in using computers, control software, and programming tools for system setup and diagnostics. Ability to read and interpret mechanical, electrical, and control drawings. Familiarity with building automation communication protocols (BACnet, Modbus, LonWorks) preferred. Physically capable of performing fieldwork including lifting up to 50 lbs, climbing ladders, and working in mechanical spaces. Must hold a valid driver's license and be able to travel locally to client sites. Candidates located in or near the West Palm Beach area is essential.
Dec 05, 2025
Full time
A Controls technician / Automation technician / Systems technician is required to join an industry leader in Florida. The successful Controls technician / Automation technician / Systems technician is responsible for installing, commissioning, troubleshooting, and maintaining building automation systems, applying practical expertise in HVAC controls and systems integration. Package $60,000 - $85,000 base salary Car allowance 401(k), Health, dental, life and vision insurance PTO Responsibilities Perform start-up, commissioning, and re-commissioning of DDC and building automation systems. Install, test, and calibrate control devices, sensors, and actuators used in HVAC and mechanical systems. Program, configure, and adjust control parameters, setpoints, trend logs, alarms, and graphics. Use laptops and diagnostic tools to troubleshoot and resolve field issues related to system communication, wiring, or programming. Maintain accurate documentation, including redline drawings, schematics, and system records. Coordinate with project engineers and field teams to deliver efficient, code-compliant installations. Integrate and verify control systems with third-party equipment and networks (e.g., BACnet, Modbus, LonWorks). Provide training and technical support to end users and facility staff on system operation and maintenance. Ensure compliance with safety protocols and complete all required pre-task planning and risk assessments. Manage daily assignments to ensure work is completed on schedule and within budget. Requirements Minimum of 3 years' hands-on experience with DDC systems installation, programming, commissioning, and troubleshooting. Strong understanding of HVAC system operation, control logic, and electrical schematics. Proficient in using computers, control software, and programming tools for system setup and diagnostics. Ability to read and interpret mechanical, electrical, and control drawings. Familiarity with building automation communication protocols (BACnet, Modbus, LonWorks) preferred. Physically capable of performing fieldwork including lifting up to 50 lbs, climbing ladders, and working in mechanical spaces. Must hold a valid driver's license and be able to travel locally to client sites. Candidates located in or near the West Palm Beach area is essential.
Vehicle Technician / Mechanic _ Location: EMG Spalding BYD_ _ Salary : Negotiable on Experience_ _Full Time, Permanent_ _Weekdays and Weekend Availability_ _ Grainger Motor Group has officially been certified as a Great Place to Work for 2025._ EMG BYD Spalding, part of the EMG/Grainger Motor Group , is expanding. We're looking for talented Vehicle Technicians and MOT Testers to join our growing team. What We're Looking For Qualified Vehicle Technician with strong mechanical skills (City and Guilds L3) Valid MOT Testing License (DVSA approved) Excellent attention to detail and a commitment to high standards Strong communication skills, both written and verbal Ability to work independently and as part of a busy team A proactive, customer-focused attitude What We Offer Competitive salary with commission (depending on skills & experience) Career development opportunities and manufacturer training (including EV/Hybrid) Health & Well-Being Service Staff discount across EMG Motor Group Staff events and recognition programmes Full-time permanent contract with structured shifts Day shifts Overtime opportunities Paid holidays Key Responsibilities Carry out MOT tests in line with DVSA standards Perform routine servicing, repairs, brakes, exhausts, and general vehicle maintenance Support workshop activities when not carrying out MOT tests Maintain an organised, safe, and compliant MOT bay Complete quality control checks and annual training/assessments Assist management with additional workshop and service centre duties If you are interested to learn more, please apply now. Job Type: Full-time Pay: From £30,000.00 per year Application question(s): Are you in a commutable distance from the Spalding area? Experience: Vehicle Technician: 3 years (required) Licence/Certification: City and Guilds L3 Vehicle Maintenance and Repair (required) Valid UK Drivers License (required) Work Location: In person
Dec 05, 2025
Full time
Vehicle Technician / Mechanic _ Location: EMG Spalding BYD_ _ Salary : Negotiable on Experience_ _Full Time, Permanent_ _Weekdays and Weekend Availability_ _ Grainger Motor Group has officially been certified as a Great Place to Work for 2025._ EMG BYD Spalding, part of the EMG/Grainger Motor Group , is expanding. We're looking for talented Vehicle Technicians and MOT Testers to join our growing team. What We're Looking For Qualified Vehicle Technician with strong mechanical skills (City and Guilds L3) Valid MOT Testing License (DVSA approved) Excellent attention to detail and a commitment to high standards Strong communication skills, both written and verbal Ability to work independently and as part of a busy team A proactive, customer-focused attitude What We Offer Competitive salary with commission (depending on skills & experience) Career development opportunities and manufacturer training (including EV/Hybrid) Health & Well-Being Service Staff discount across EMG Motor Group Staff events and recognition programmes Full-time permanent contract with structured shifts Day shifts Overtime opportunities Paid holidays Key Responsibilities Carry out MOT tests in line with DVSA standards Perform routine servicing, repairs, brakes, exhausts, and general vehicle maintenance Support workshop activities when not carrying out MOT tests Maintain an organised, safe, and compliant MOT bay Complete quality control checks and annual training/assessments Assist management with additional workshop and service centre duties If you are interested to learn more, please apply now. Job Type: Full-time Pay: From £30,000.00 per year Application question(s): Are you in a commutable distance from the Spalding area? Experience: Vehicle Technician: 3 years (required) Licence/Certification: City and Guilds L3 Vehicle Maintenance and Repair (required) Valid UK Drivers License (required) Work Location: In person
Who we are We're Müller UK & Ireland, a family-run dairy business and we're experts at what we do. Dairy is a key part of a healthy and balanced diet and we're super proud to help meet the nutritional needs of millions of people, every, single, day. To do this, our business has been split into two areas: Müller Milk & Ingredients (MMI) and Müller Yogurt & Desserts (MYD). Join MMI and step into a culture that's fast-paced and full of opportunity. With great benefits, exciting challenges, a dream team of people, this is your chance to make a real impact. Over here, we're processing enough milk to make 66 billion cups of tea every year. And we're so much more than just milk. This is the place to come for cream, butter, milk drinks and ingredients products (a lot, we know), all made from milk from over 1,000 supplying farmers in Britain. Why Müller? Milk flows through everything at Müller - from farm to factory to fridge. But the true impact comes from our people, in each and every corner of the business, working hard and as a team to put smiles on faces everywhere, making each day delicious for our shoppers. As the UK's most popular dairy brand, we're always striving to make a real difference for our planet, our partners and our people, making sure we're helping to create a more sustainable dairy future. We're growing to keep up with the millions of people reaching for our branded and private label products on shelves everywhere. Join a culture full of pace that's bold and entrepreneurial, with opportunities that are yours for the taking - and even enjoy every benefit and bonus to sweeten the deal. Engineering Technician - Multiple Roles Available Location: Bridgwater Contract Type: Permanent - 4 on 4 off (7 AM - 7 PM, 2 days / 2 nights) Due to increased headcount, we are recruiting for multiple Engineering Technician roles at Müller Milk & Ingredients in Bridgwater. Whether you're mechanically or electrically biased, single-skilled or multi-skilled, we welcome your application. We're open to candidates from all industries, not just food or dairy, who bring strong maintenance experience and a proactive mindset. This is a hands-on role focused on maintaining and improving a wide range of equipment and systems across the site. What We're Looking For: Mechanical or electrical engineers, single or multi-skilled Experience from any industry (manufacturing, armed forces, automotive, etc.) Completion of a recognised engineering apprenticeship Relevant qualifications and hands-on maintenance experience Strong fault-finding and problem-solving skills Ability to interpret technical drawings and schematics Willingness to work on a rotating shift pattern Additional qualifications such as HNC, IOSH/NEBOSH, or experience with continuous improvement tools are beneficial but not essential. Key Responsibilities: Perform planned and reactive maintenance to minimise downtime Diagnose and resolve faults across various systems and machinery Support automation and control fault finding Carry out preventative, condition-based, and corrective maintenance Contribute to continuous improvement and reliability initiatives What We Offer: Clear career development pathways and long-term prospects Generous annual leave allowance (276 hours) Access to the Müller Rewards Platform with discounts across major retailers Onsite parking Supportive team environment Life assurance and pension scheme 5% annual bonus (subject to company performance) This is an excellent opportunity to join a company that values your experience, regardless of your background, and supports your growth and development.
Dec 05, 2025
Full time
Who we are We're Müller UK & Ireland, a family-run dairy business and we're experts at what we do. Dairy is a key part of a healthy and balanced diet and we're super proud to help meet the nutritional needs of millions of people, every, single, day. To do this, our business has been split into two areas: Müller Milk & Ingredients (MMI) and Müller Yogurt & Desserts (MYD). Join MMI and step into a culture that's fast-paced and full of opportunity. With great benefits, exciting challenges, a dream team of people, this is your chance to make a real impact. Over here, we're processing enough milk to make 66 billion cups of tea every year. And we're so much more than just milk. This is the place to come for cream, butter, milk drinks and ingredients products (a lot, we know), all made from milk from over 1,000 supplying farmers in Britain. Why Müller? Milk flows through everything at Müller - from farm to factory to fridge. But the true impact comes from our people, in each and every corner of the business, working hard and as a team to put smiles on faces everywhere, making each day delicious for our shoppers. As the UK's most popular dairy brand, we're always striving to make a real difference for our planet, our partners and our people, making sure we're helping to create a more sustainable dairy future. We're growing to keep up with the millions of people reaching for our branded and private label products on shelves everywhere. Join a culture full of pace that's bold and entrepreneurial, with opportunities that are yours for the taking - and even enjoy every benefit and bonus to sweeten the deal. Engineering Technician - Multiple Roles Available Location: Bridgwater Contract Type: Permanent - 4 on 4 off (7 AM - 7 PM, 2 days / 2 nights) Due to increased headcount, we are recruiting for multiple Engineering Technician roles at Müller Milk & Ingredients in Bridgwater. Whether you're mechanically or electrically biased, single-skilled or multi-skilled, we welcome your application. We're open to candidates from all industries, not just food or dairy, who bring strong maintenance experience and a proactive mindset. This is a hands-on role focused on maintaining and improving a wide range of equipment and systems across the site. What We're Looking For: Mechanical or electrical engineers, single or multi-skilled Experience from any industry (manufacturing, armed forces, automotive, etc.) Completion of a recognised engineering apprenticeship Relevant qualifications and hands-on maintenance experience Strong fault-finding and problem-solving skills Ability to interpret technical drawings and schematics Willingness to work on a rotating shift pattern Additional qualifications such as HNC, IOSH/NEBOSH, or experience with continuous improvement tools are beneficial but not essential. Key Responsibilities: Perform planned and reactive maintenance to minimise downtime Diagnose and resolve faults across various systems and machinery Support automation and control fault finding Carry out preventative, condition-based, and corrective maintenance Contribute to continuous improvement and reliability initiatives What We Offer: Clear career development pathways and long-term prospects Generous annual leave allowance (276 hours) Access to the Müller Rewards Platform with discounts across major retailers Onsite parking Supportive team environment Life assurance and pension scheme 5% annual bonus (subject to company performance) This is an excellent opportunity to join a company that values your experience, regardless of your background, and supports your growth and development.
We are recruiting a Mechanical Technician for a 6 month contract working 3 on 4 off rotation. Applicants MUST have FPSO core crew experience The Mechanical Technician is responsible for the safe and efficient functioning of all aspects of the mechanical equipment of the installation and assisting in specific production areas as required. Also responsible for safely operating and monitoring the Engine room equipment, utilities and Power generation prime movers. The Mechanical Technician is responsible to the Mechanical Lead for: Carrying out activities to ensure the safe and efficient functioning of all aspects of the Maintenance Department. The safe condition of all machinery, that it is operated in a safe manner and that all operations are carried out according to correct and safe procedures as directed. Monitoring of machinery to ensure efficient operation, to minimise fuel and oil consumption and to ensure maximum availability of machinery at all times as directed by the Mechanical Lead. Carrying out maintenance and oil sampling as directed by the Mechanical Lead. Ensuring the good working order of all emergency plant and equipment at all times. Daily visual inspections and checks of plant and machinery as directed by the Mechanical Lead. Watchkeeping duties as required including making regular tours of inspection of machinery and ensuring that accurate readings are obtained for the completion of logbooks as directed by the Mechanical Lead. Efficient and economic use of spare equipment. Administration of Maximo Maintenance Management System (MMS) for Planned and Corrective Maintenance work orders. Condition vibration monitoring of vessel equipment. Carry out process integrity survey on vessel equipment. Supporting in the area of safe handling of refrigerants as appropriate. Conduct stock takes on production and utilities oil, gas and chemicals, maintaining these levels as necessary. Logging and recording of machinery running hours as directed by the Mechanical Lead. Complete all training as directed by the company including Onboard Familiarisation. Ensuring continuous compliance with the company competency assessment procedure. Stand in as Mechanical Lead as required. Performing tasks in a safe and responsible manner. Desired Qualities / Qualifications Emergency Response Duties Offshore Emergency Response Team Member Offshore Emergency Helideck Team Member Qualifications Combined Offshore Survival, Fire Fighting and HUET Certificate MIST/ IMIST Oil & Gas UK Offshore Medical Certificate Oil & Gas UK Certificate of Fitness to Participate in Emergency Response Team Duties Approved Mechanical Engineering qualification or similar mechanical engineering background Role Training Arrival Installation Safety Induction Authorised Gas Tester Electronic Permit to Work Performing Authority Isolating Authority Environmental Awareness Abrasive Wheels Small Bore Tubing / Fittings Flange Management Rigger Stage 1 Offshore Emergency Response Team Member Offshore Emergency Helideck Team Member Helicopter refuelling Dangerous Goods by Air Awareness Maximo Recognised Boiler Operation Training Supplementary Training (as required) Marine Operator Power Systems Safe Handling of Refrigerants (F-GAS) ENG 1 (Seafarers) Medical
Dec 05, 2025
We are recruiting a Mechanical Technician for a 6 month contract working 3 on 4 off rotation. Applicants MUST have FPSO core crew experience The Mechanical Technician is responsible for the safe and efficient functioning of all aspects of the mechanical equipment of the installation and assisting in specific production areas as required. Also responsible for safely operating and monitoring the Engine room equipment, utilities and Power generation prime movers. The Mechanical Technician is responsible to the Mechanical Lead for: Carrying out activities to ensure the safe and efficient functioning of all aspects of the Maintenance Department. The safe condition of all machinery, that it is operated in a safe manner and that all operations are carried out according to correct and safe procedures as directed. Monitoring of machinery to ensure efficient operation, to minimise fuel and oil consumption and to ensure maximum availability of machinery at all times as directed by the Mechanical Lead. Carrying out maintenance and oil sampling as directed by the Mechanical Lead. Ensuring the good working order of all emergency plant and equipment at all times. Daily visual inspections and checks of plant and machinery as directed by the Mechanical Lead. Watchkeeping duties as required including making regular tours of inspection of machinery and ensuring that accurate readings are obtained for the completion of logbooks as directed by the Mechanical Lead. Efficient and economic use of spare equipment. Administration of Maximo Maintenance Management System (MMS) for Planned and Corrective Maintenance work orders. Condition vibration monitoring of vessel equipment. Carry out process integrity survey on vessel equipment. Supporting in the area of safe handling of refrigerants as appropriate. Conduct stock takes on production and utilities oil, gas and chemicals, maintaining these levels as necessary. Logging and recording of machinery running hours as directed by the Mechanical Lead. Complete all training as directed by the company including Onboard Familiarisation. Ensuring continuous compliance with the company competency assessment procedure. Stand in as Mechanical Lead as required. Performing tasks in a safe and responsible manner. Desired Qualities / Qualifications Emergency Response Duties Offshore Emergency Response Team Member Offshore Emergency Helideck Team Member Qualifications Combined Offshore Survival, Fire Fighting and HUET Certificate MIST/ IMIST Oil & Gas UK Offshore Medical Certificate Oil & Gas UK Certificate of Fitness to Participate in Emergency Response Team Duties Approved Mechanical Engineering qualification or similar mechanical engineering background Role Training Arrival Installation Safety Induction Authorised Gas Tester Electronic Permit to Work Performing Authority Isolating Authority Environmental Awareness Abrasive Wheels Small Bore Tubing / Fittings Flange Management Rigger Stage 1 Offshore Emergency Response Team Member Offshore Emergency Helideck Team Member Helicopter refuelling Dangerous Goods by Air Awareness Maximo Recognised Boiler Operation Training Supplementary Training (as required) Marine Operator Power Systems Safe Handling of Refrigerants (F-GAS) ENG 1 (Seafarers) Medical
Senior Technician - Mechanical Engineering Uxbridge £24,569 - £26,114 4 days per week (28.8 hours) Monday - Thursday Permanent Negotiable start date We are seeking a Senior Technician in to support students and staff in our Mechanical Engineering section. You would supervise the team of Technicians in Mechanical Engineering, take the lead on Health and Safety issues, consumables, stock and maintain an inventory. You would prepare and maintain equipment for use by lecturing staff and students, demonstrate the use of equipment and support the teaching teams in their delivery of the curriculum. You would also supervise students in the workshop ensuring that they comply with health and safety requirements and good workshop practice. You will need to possess a Level 3 qualification in Mechanical Engineering with experience of working as a Technician in Mechanical Engineering, and the ability to work effectively with young people aged 16 - 19. You should have a good understanding of health and safety requirements and good communication skills, and have the ability to supervise a team effectively. Please note, we are unable to offer sponsorship for this role DUTIES: • To supervise the team of Mechanical Engineering Technicians within the Section. • To take the lead on Health & Safety within the Section. • To regularly service and maintain tools and equipment within the Engineering section. • To carry out risk assessment in conjunction with the Course Team Leader, Section Manager and Head of School and recommend improvements. • To report any major maintenance tasks to the Section Manager/ Head of School to ensure the least impact on teaching and learning. • To raise purchase order request forms to maintain stock levels of materials and tools at a level which enables effective teaching and learning. • To maintain cleanliness of teaching environments within the area of responsibility. • To liaise with Section Manager/ Head of School to ensure that all areas comply with health and safety and environmental requirements. • To demonstrate skills/ activities/ use of equipment and supervise, in conjunction with the lecturer, students working within the teaching areas with respect to health and safety and good working practice issues. • To assist course teams in preparing materials and resources for teaching and learning. • To assist lecturers in setting up equipment for teaching and learning within the post holder's area of responsibility. • To work with other technicians to ensure continuity of provision across the School of Engineering. • To be willing to undertake first aid training and a willingness to become a first aider within the College. Qualifications: • Level 3 qualification in Mechanical Engineering • Willing to undertake first aid training Knowledge and Experience: • Experience of working as a Mechanical Engineering Technician • Ability to lead/supervise a team effectively • Ability and willingness to learn and use mechanical test equipment e.g. for material testing, fluid mechanics, mechanical principles • Experience of bench fitting, drilling, milling and turning • Experience with CNC machines, vacuum forming, grinding and band saws • Up-to-date knowledge of Health and Safety requirements, particularly applied to machine shop environments • Industrial experience in Mechanical Engineering • Good communication skills, written and verbal • Good interpersonal skills • Ability to work effectively with vocational learners aged 16-19 We are dedicated to safeguarding and promoting the welfare of children and expect all staff to share this commitment. You will have a safeguarding responsibility if appointed. The successful candidate will be subject to enhanced clearance through the Disclosure and Barring Service and employment will be subject to references. This post is not exempt from the Rehabilitation of Offenders Act 1974. To apply for this opportunity your detailed CV to Clarus Education now to be considered. We will be contacting those shortlisted within 48 hours of an application. Please see our website page headed 'About' and scroll to the bottom to see our 'Privacy Notice' for an explanation about how we use information we collect about you.
Dec 05, 2025
Full time
Senior Technician - Mechanical Engineering Uxbridge £24,569 - £26,114 4 days per week (28.8 hours) Monday - Thursday Permanent Negotiable start date We are seeking a Senior Technician in to support students and staff in our Mechanical Engineering section. You would supervise the team of Technicians in Mechanical Engineering, take the lead on Health and Safety issues, consumables, stock and maintain an inventory. You would prepare and maintain equipment for use by lecturing staff and students, demonstrate the use of equipment and support the teaching teams in their delivery of the curriculum. You would also supervise students in the workshop ensuring that they comply with health and safety requirements and good workshop practice. You will need to possess a Level 3 qualification in Mechanical Engineering with experience of working as a Technician in Mechanical Engineering, and the ability to work effectively with young people aged 16 - 19. You should have a good understanding of health and safety requirements and good communication skills, and have the ability to supervise a team effectively. Please note, we are unable to offer sponsorship for this role DUTIES: • To supervise the team of Mechanical Engineering Technicians within the Section. • To take the lead on Health & Safety within the Section. • To regularly service and maintain tools and equipment within the Engineering section. • To carry out risk assessment in conjunction with the Course Team Leader, Section Manager and Head of School and recommend improvements. • To report any major maintenance tasks to the Section Manager/ Head of School to ensure the least impact on teaching and learning. • To raise purchase order request forms to maintain stock levels of materials and tools at a level which enables effective teaching and learning. • To maintain cleanliness of teaching environments within the area of responsibility. • To liaise with Section Manager/ Head of School to ensure that all areas comply with health and safety and environmental requirements. • To demonstrate skills/ activities/ use of equipment and supervise, in conjunction with the lecturer, students working within the teaching areas with respect to health and safety and good working practice issues. • To assist course teams in preparing materials and resources for teaching and learning. • To assist lecturers in setting up equipment for teaching and learning within the post holder's area of responsibility. • To work with other technicians to ensure continuity of provision across the School of Engineering. • To be willing to undertake first aid training and a willingness to become a first aider within the College. Qualifications: • Level 3 qualification in Mechanical Engineering • Willing to undertake first aid training Knowledge and Experience: • Experience of working as a Mechanical Engineering Technician • Ability to lead/supervise a team effectively • Ability and willingness to learn and use mechanical test equipment e.g. for material testing, fluid mechanics, mechanical principles • Experience of bench fitting, drilling, milling and turning • Experience with CNC machines, vacuum forming, grinding and band saws • Up-to-date knowledge of Health and Safety requirements, particularly applied to machine shop environments • Industrial experience in Mechanical Engineering • Good communication skills, written and verbal • Good interpersonal skills • Ability to work effectively with vocational learners aged 16-19 We are dedicated to safeguarding and promoting the welfare of children and expect all staff to share this commitment. You will have a safeguarding responsibility if appointed. The successful candidate will be subject to enhanced clearance through the Disclosure and Barring Service and employment will be subject to references. This post is not exempt from the Rehabilitation of Offenders Act 1974. To apply for this opportunity your detailed CV to Clarus Education now to be considered. We will be contacting those shortlisted within 48 hours of an application. Please see our website page headed 'About' and scroll to the bottom to see our 'Privacy Notice' for an explanation about how we use information we collect about you.
Location: Droitwich Job Type: Full-time Salary: £48,000 - £50,000 per year HGV Technician / Mechanic - Droitwich We're seeking an experienced and qualified HGV Workshop Mechanic to join a respected logistics company based in Droitwich. The business operates several depots across the UK and is recognised for delivering reliable, high-quality transport and logistics solutions. As part of a busy and well-equipped workshop, you'll be responsible for the maintenance, repair, and inspection of a modern fleet of Mercedes and DAF HGVs , as well as tri-axle trailers . This role offers excellent long-term stability and the chance to work within a supportive, professional environment. Key Responsibilities Carry out routine servicing, maintenance, and mechanical repairs on HGVs and trailers Diagnose and resolve electrical, hydraulic, and pneumatic faults Ensure all vehicles are roadworthy, compliant, and meet DVSA standards Work efficiently both independently and as part of a small workshop team Maintain accurate records and complete all job-related documentation Follow all Health & Safety policies and promote safe working practices Working Hours Monday to Friday (rotating shifts): Week 1: 06:00 - 14:30 Week 2: 12:00 - 20:30 Alternate Saturdays: 07:00 - 12:00 On-call rota: Additional payment provided What's on Offer Competitive salary: £48,000 - £50,000 per year Overtime opportunities Tool allowance On-call payments Company pension Free on-site parking Health & wellbeing programme Supportive team culture with long-term career prospects Requirements Recognised qualification in HGV mechanics (City & Guilds, NVQ Level 3, or equivalent) Valid HGV licence (essential) Proven experience working on HGVs and trailers Strong diagnostic and fault-finding skills Reliable, adaptable, and proactive approach to work
Dec 05, 2025
Full time
Location: Droitwich Job Type: Full-time Salary: £48,000 - £50,000 per year HGV Technician / Mechanic - Droitwich We're seeking an experienced and qualified HGV Workshop Mechanic to join a respected logistics company based in Droitwich. The business operates several depots across the UK and is recognised for delivering reliable, high-quality transport and logistics solutions. As part of a busy and well-equipped workshop, you'll be responsible for the maintenance, repair, and inspection of a modern fleet of Mercedes and DAF HGVs , as well as tri-axle trailers . This role offers excellent long-term stability and the chance to work within a supportive, professional environment. Key Responsibilities Carry out routine servicing, maintenance, and mechanical repairs on HGVs and trailers Diagnose and resolve electrical, hydraulic, and pneumatic faults Ensure all vehicles are roadworthy, compliant, and meet DVSA standards Work efficiently both independently and as part of a small workshop team Maintain accurate records and complete all job-related documentation Follow all Health & Safety policies and promote safe working practices Working Hours Monday to Friday (rotating shifts): Week 1: 06:00 - 14:30 Week 2: 12:00 - 20:30 Alternate Saturdays: 07:00 - 12:00 On-call rota: Additional payment provided What's on Offer Competitive salary: £48,000 - £50,000 per year Overtime opportunities Tool allowance On-call payments Company pension Free on-site parking Health & wellbeing programme Supportive team culture with long-term career prospects Requirements Recognised qualification in HGV mechanics (City & Guilds, NVQ Level 3, or equivalent) Valid HGV licence (essential) Proven experience working on HGVs and trailers Strong diagnostic and fault-finding skills Reliable, adaptable, and proactive approach to work
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Nov 15, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
