Our client is one of the UK s leading Field Services companies specialising in providing external field agency solutions primarily to the utilities sector. BENEFITS Work shift flexibility can be offered - core hours of 8am to 5.30pm must be covered for 4 days and earlier finish on a Friday (30 mins). Saturday hours available to include in shift overall if required. Monthly incentive payment scheme. 28 days holiday (including Bank holidays). Additional 1 days annual leave for each year worked. Christmas 'shut down - usually from 24th December - 2nd January. Company vehicle. All IT equipment provided and the tools to do the job. A 'Love to Shop voucher on your Birthday every year. Private pension contributions. Employee Assistance Scheme giving private and confidential access to free counselling, and mental health and well-being services. An exciting opportunity has arisen for an enthusiastic and motivated individual to join their rapidly expanding field team. You will be allocated a territory based on postcode boundaries (SO & PO postcodes) and will conduct visits to properties primarily within this specified area on behalf of their varied client base. You will visit domestic and commercial customers to assist with resolving outstanding balances on behalf of Utility companies. Due to the nature of the work a high degree of flexibility is required in respect of working hours. Notwithstanding this, most of the work will be conducted during weekday office opening hours. The successful applicant will be required to attend induction training at the Company s Head Office in Stratford upon Avon. The duration of this training will be 3 - 5 days. (Please note this will be conducted remotely for the time being) Duties Include: As a Field Representative you will perform site visits for a variety of purposes such as payment negotiation, payment collection, gas and electricity meter inspections, customer reconnection, property status reports, occupancy verification and vulnerability / health and safety checks. The aim of the visit is to ensure the relevant account is resolved in a timely and efficient manner, with the best possible outcome achieved for all concerned. Conduct pre-disconnection visits in line with specific client requirements. Perform meter inspection and/or safety inspection visits, with a need to confirm all meter details available at the address. Visit addresses whereby customer vulnerability is known to assist with resolving any problems the customer (and supplier) may have. Highlight and fully record any vulnerability found at an address on all visit types. Negotiate payment and/or payment solutions for individual customers in line with customer needs and company processes. Attend Magistrates courts to obtain Rights of Entry Warrants Attending utility isolations with locksmiths and engineers, overseeing the work being completed. Report, via the relevant procedures, all health and safety matters whilst conducting your visits. Update your visit report with any customer dissatisfaction feedback received. Ensure immediate return of all visit results to prevent any delay with updating our clients. Pro-actively look to improve a process or a 'Customer journey through feedback to Head Office. Attend, and have input, in to meetings as required. To comply with the company s Quality Policy by following all QMS procedures and related work instructions. The Ideal Candidate: Excellent interpersonal skills and ability to communicate effectively with a wide range of people, both orally and written and in a professional manner at all times Previous experience in debt negotiation/collection, customer service, conflict resolution is desirable however not essential. Ability to work and deliver in a fast-paced environment with firm deadlines and demanding targets, showing ability to react to change and flexible approach to working hours Self-motivated and driven with a positive attitude - and a desire to self-develop. Working alone, the individual will need to organise their workload to maximise their effectiveness. Competent I.T. skills
May 18, 2024
Full time
Our client is one of the UK s leading Field Services companies specialising in providing external field agency solutions primarily to the utilities sector. BENEFITS Work shift flexibility can be offered - core hours of 8am to 5.30pm must be covered for 4 days and earlier finish on a Friday (30 mins). Saturday hours available to include in shift overall if required. Monthly incentive payment scheme. 28 days holiday (including Bank holidays). Additional 1 days annual leave for each year worked. Christmas 'shut down - usually from 24th December - 2nd January. Company vehicle. All IT equipment provided and the tools to do the job. A 'Love to Shop voucher on your Birthday every year. Private pension contributions. Employee Assistance Scheme giving private and confidential access to free counselling, and mental health and well-being services. An exciting opportunity has arisen for an enthusiastic and motivated individual to join their rapidly expanding field team. You will be allocated a territory based on postcode boundaries (SO & PO postcodes) and will conduct visits to properties primarily within this specified area on behalf of their varied client base. You will visit domestic and commercial customers to assist with resolving outstanding balances on behalf of Utility companies. Due to the nature of the work a high degree of flexibility is required in respect of working hours. Notwithstanding this, most of the work will be conducted during weekday office opening hours. The successful applicant will be required to attend induction training at the Company s Head Office in Stratford upon Avon. The duration of this training will be 3 - 5 days. (Please note this will be conducted remotely for the time being) Duties Include: As a Field Representative you will perform site visits for a variety of purposes such as payment negotiation, payment collection, gas and electricity meter inspections, customer reconnection, property status reports, occupancy verification and vulnerability / health and safety checks. The aim of the visit is to ensure the relevant account is resolved in a timely and efficient manner, with the best possible outcome achieved for all concerned. Conduct pre-disconnection visits in line with specific client requirements. Perform meter inspection and/or safety inspection visits, with a need to confirm all meter details available at the address. Visit addresses whereby customer vulnerability is known to assist with resolving any problems the customer (and supplier) may have. Highlight and fully record any vulnerability found at an address on all visit types. Negotiate payment and/or payment solutions for individual customers in line with customer needs and company processes. Attend Magistrates courts to obtain Rights of Entry Warrants Attending utility isolations with locksmiths and engineers, overseeing the work being completed. Report, via the relevant procedures, all health and safety matters whilst conducting your visits. Update your visit report with any customer dissatisfaction feedback received. Ensure immediate return of all visit results to prevent any delay with updating our clients. Pro-actively look to improve a process or a 'Customer journey through feedback to Head Office. Attend, and have input, in to meetings as required. To comply with the company s Quality Policy by following all QMS procedures and related work instructions. The Ideal Candidate: Excellent interpersonal skills and ability to communicate effectively with a wide range of people, both orally and written and in a professional manner at all times Previous experience in debt negotiation/collection, customer service, conflict resolution is desirable however not essential. Ability to work and deliver in a fast-paced environment with firm deadlines and demanding targets, showing ability to react to change and flexible approach to working hours Self-motivated and driven with a positive attitude - and a desire to self-develop. Working alone, the individual will need to organise their workload to maximise their effectiveness. Competent I.T. skills
Nightshifts Quality Advisor Location: Heathrow Airport About Ferrovial Construction Ferrovial Construction is the engineering and construction arm of the Ferrovial Group. It is the largest private transport infrastructure operator in the world in terms of capital invested with a workforce of approximately 96,000 employees, and a presence across 15 countries with over 60 years experience. We are a Spanish multinational company operating in 4 divisions; Airports, Highways, Construction and Building subsidiaries. Ferrovial are committed to developing sustainable and innovative solutions, with the aim to create value for society, and for clients, investors and employees. Ferrovial Construction Ltd UK has 7 major Infrastructure projects across the UK; HS2, Silvertown (STT), Heathrow (H7), Norwich Western Link, Thames Tideway (TTT), Northern Line Extension (NLE) and Farringdon. At Ferrovial we have five core values: Excellence, Innovation, Collaboration, integrity and Respect. We are proud of our work and values which we live by to achieve our goals. As one of the industry s most diverse organisations, our people bring a strong blend of local talent, international expertise and perspectives from all backgrounds. This drives innovation and fresh thinking required to set new standards of excellence. Heathrow H7 Project Our H7 framework spans from airfield works (taxiways, runways, stands), to civils (roads, demolition works, underground and above ground structures), and MEP packages (services tunnels, lifts, life safety systems, fuel/fire mains). Successful candidate must be open to doing night shifts if required. Key Responsibilities: Work nightshifts on a permanent basis. Esporadic dayshifts might be required. Assist the H7 Quality Manager in ensuring that the HAL Employer s Requirements for Quality Management are followed at H7 Projects. Primary point of contact on site, regarding all quality control/assurance aspects. Assist the project team and Site team to ensure the implementation of Right First time Perform relevant and required engagement with the team to reinforce the Quality Culture (such as: Quality inductions, Quality Circles, lessons Learn Event, Tool box Talks, etc.) Facilitating quality inductions to the Work Packages team including suppliers. Prepare the relevant documented information for these engagements Ensure that Inspection and Test Plans are accepted before work starts. Review and maintain the inspection and Test plan and relevant inspection Sheet or other Quality forms. Develop and Digitalise Quality forms To coordinate quality documentation and effect their implementation by liaising with construction and departmental managers regarding Quality requirements, including the supply chain Review, manage and submit the H&S File (Part A, B and C). Promote and maintain the Right First Time/continuous improvement culture on site. To initiate, monitor and record effective corrective actions and control of non-conformances. Annalise the trends, and report accordingly. Perform relevant investigation of root cause analysis, defects and other issues related to Quality To review, update and distribute the Works Package Quality documents, including Site records and testing. Ensure timely execution of benchmarking events with the Employer. Maintain the Quality verification plan and applicable Quality Registers and other relevant Quality Documentation. Ensure any record of quality assurance are correctly presented and relevant. Update the Quality Management plan when required. Assist during the Audits, and compile the relevant documentation to close them Update and maintain the project Common Data Environment: Asite, Dalux, DocSite (SharePoint), as required Be part of Ferrovial Construction Values. Be committed to Innovate Ensure that all Works Package quality registers and trackers are in place, addressed and updated regularly. Cooperate with H7 Doc Controllers and Asset integration and Handover management departments Facilitating weekly quality sessions with Work Packages team including suppliers. Maintain a strong focus on key quality issues on site. Key Skills, Experience and Qualifications Cooperative and committed. Production Civil / Building Engineering background as Site Engineer or similar. Experience in Aviation sector, knowledge of systems required for Airport operation Excellent communication skills and ability to interact at a variety of levels throughout Ferrovial. Valid CSCS card to enable going on site working with site technicians. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Ferrovial embraces diversity and inclusion and we see the value in providing equal opportunities to all employees. We are committed to building an inclusive team from a variety of different backgrounds, perspectives and skills so we encourage candidates from underrepresented groups to apply.
May 18, 2024
Full time
Nightshifts Quality Advisor Location: Heathrow Airport About Ferrovial Construction Ferrovial Construction is the engineering and construction arm of the Ferrovial Group. It is the largest private transport infrastructure operator in the world in terms of capital invested with a workforce of approximately 96,000 employees, and a presence across 15 countries with over 60 years experience. We are a Spanish multinational company operating in 4 divisions; Airports, Highways, Construction and Building subsidiaries. Ferrovial are committed to developing sustainable and innovative solutions, with the aim to create value for society, and for clients, investors and employees. Ferrovial Construction Ltd UK has 7 major Infrastructure projects across the UK; HS2, Silvertown (STT), Heathrow (H7), Norwich Western Link, Thames Tideway (TTT), Northern Line Extension (NLE) and Farringdon. At Ferrovial we have five core values: Excellence, Innovation, Collaboration, integrity and Respect. We are proud of our work and values which we live by to achieve our goals. As one of the industry s most diverse organisations, our people bring a strong blend of local talent, international expertise and perspectives from all backgrounds. This drives innovation and fresh thinking required to set new standards of excellence. Heathrow H7 Project Our H7 framework spans from airfield works (taxiways, runways, stands), to civils (roads, demolition works, underground and above ground structures), and MEP packages (services tunnels, lifts, life safety systems, fuel/fire mains). Successful candidate must be open to doing night shifts if required. Key Responsibilities: Work nightshifts on a permanent basis. Esporadic dayshifts might be required. Assist the H7 Quality Manager in ensuring that the HAL Employer s Requirements for Quality Management are followed at H7 Projects. Primary point of contact on site, regarding all quality control/assurance aspects. Assist the project team and Site team to ensure the implementation of Right First time Perform relevant and required engagement with the team to reinforce the Quality Culture (such as: Quality inductions, Quality Circles, lessons Learn Event, Tool box Talks, etc.) Facilitating quality inductions to the Work Packages team including suppliers. Prepare the relevant documented information for these engagements Ensure that Inspection and Test Plans are accepted before work starts. Review and maintain the inspection and Test plan and relevant inspection Sheet or other Quality forms. Develop and Digitalise Quality forms To coordinate quality documentation and effect their implementation by liaising with construction and departmental managers regarding Quality requirements, including the supply chain Review, manage and submit the H&S File (Part A, B and C). Promote and maintain the Right First Time/continuous improvement culture on site. To initiate, monitor and record effective corrective actions and control of non-conformances. Annalise the trends, and report accordingly. Perform relevant investigation of root cause analysis, defects and other issues related to Quality To review, update and distribute the Works Package Quality documents, including Site records and testing. Ensure timely execution of benchmarking events with the Employer. Maintain the Quality verification plan and applicable Quality Registers and other relevant Quality Documentation. Ensure any record of quality assurance are correctly presented and relevant. Update the Quality Management plan when required. Assist during the Audits, and compile the relevant documentation to close them Update and maintain the project Common Data Environment: Asite, Dalux, DocSite (SharePoint), as required Be part of Ferrovial Construction Values. Be committed to Innovate Ensure that all Works Package quality registers and trackers are in place, addressed and updated regularly. Cooperate with H7 Doc Controllers and Asset integration and Handover management departments Facilitating weekly quality sessions with Work Packages team including suppliers. Maintain a strong focus on key quality issues on site. Key Skills, Experience and Qualifications Cooperative and committed. Production Civil / Building Engineering background as Site Engineer or similar. Experience in Aviation sector, knowledge of systems required for Airport operation Excellent communication skills and ability to interact at a variety of levels throughout Ferrovial. Valid CSCS card to enable going on site working with site technicians. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Ferrovial embraces diversity and inclusion and we see the value in providing equal opportunities to all employees. We are committed to building an inclusive team from a variety of different backgrounds, perspectives and skills so we encourage candidates from underrepresented groups to apply.
Salary: 45,000 + Vehicle, Fuel Card + Package Location: Will be covering SW London & areas within a 25 mile radius. The Client The client is a leading provider of property services in the UK. They are recruiting a Mobile Engineer to join their Facilities Management team supporting their clients based in London & Southeast region. Due to the nature of the role and managing multiple contracts travel will be required so flexibility is required. The Role The main objective is for you to carry out Planned Preventative Maintenance (PPM) to the HVAC plant, including Reactive Maintenance and extra works/emergencies in accordance with the contract requirements on Mechanical Services. Due to the nature of the works, they are exceptionally keen to speak to candidates with a strong background in mechanical & electrical works Key Responsibilities: Ensure all works are delivered in guidance of the legislation and contractual obligations Utilise CAFM/PDA technology for real time job updates, and provide detailed/comprehensive reports on works delivered To respond in a prompt and effective manner to all reactive maintenance issues and help desk requests associated with the heating and ventilation systems, pumps, water tanks, valves, pipe work and associated mechanical systems or items To respond to call outs and cover breakdowns and emergencies associated with the mechanical services aspects of the contract as required. Skills & Qualifications Knowledge of Heating & Air Conditioning Systems Previous FM experience managing multiple sites Strong Electrical & HVAC Experience Have previously worked as a mobile engineer 18th Edition C&G 2367 or 2357 (Electrical Installation) and NVQ level 3 in Electrical Installations or equivalent qualifications C&G 2391 (Test & Inspection cert preferred) What is important to us is your natural communication skills to deliver high levels of customer service at all times, your ability to effectively multi-task, work to tight deadlines and problem solve on the job; whilst always promoting health & safety excellence. Plus Points They offer a competitive salary, additional pay when on call, along with 22 days holiday, Pension benefits, life Insurance, and a flexible benefits scheme that you can tailor to suit your lifestyle. If the role is of interest, please apply.
May 18, 2024
Full time
Salary: 45,000 + Vehicle, Fuel Card + Package Location: Will be covering SW London & areas within a 25 mile radius. The Client The client is a leading provider of property services in the UK. They are recruiting a Mobile Engineer to join their Facilities Management team supporting their clients based in London & Southeast region. Due to the nature of the role and managing multiple contracts travel will be required so flexibility is required. The Role The main objective is for you to carry out Planned Preventative Maintenance (PPM) to the HVAC plant, including Reactive Maintenance and extra works/emergencies in accordance with the contract requirements on Mechanical Services. Due to the nature of the works, they are exceptionally keen to speak to candidates with a strong background in mechanical & electrical works Key Responsibilities: Ensure all works are delivered in guidance of the legislation and contractual obligations Utilise CAFM/PDA technology for real time job updates, and provide detailed/comprehensive reports on works delivered To respond in a prompt and effective manner to all reactive maintenance issues and help desk requests associated with the heating and ventilation systems, pumps, water tanks, valves, pipe work and associated mechanical systems or items To respond to call outs and cover breakdowns and emergencies associated with the mechanical services aspects of the contract as required. Skills & Qualifications Knowledge of Heating & Air Conditioning Systems Previous FM experience managing multiple sites Strong Electrical & HVAC Experience Have previously worked as a mobile engineer 18th Edition C&G 2367 or 2357 (Electrical Installation) and NVQ level 3 in Electrical Installations or equivalent qualifications C&G 2391 (Test & Inspection cert preferred) What is important to us is your natural communication skills to deliver high levels of customer service at all times, your ability to effectively multi-task, work to tight deadlines and problem solve on the job; whilst always promoting health & safety excellence. Plus Points They offer a competitive salary, additional pay when on call, along with 22 days holiday, Pension benefits, life Insurance, and a flexible benefits scheme that you can tailor to suit your lifestyle. If the role is of interest, please apply.
Engineering Planner Are you a highly organised and motivated individual with a background in mechanical maintenance engineering? Are you looking for an exciting opportunity to join a dynamic team and play a key role in planning and coordinating maintenance activities? If so, our client is seeking an Engineering Planner to join their engineering department! Responsibilities: Build and communicate weekly and monthly maintenance schedules to ensure the completion of planned maintenance activities, ad-hoc repairs, and statutory inspections. Utilise the CMMS system to prioritise work requests, issue work orders, and plan all work and resources on a day-to-day basis. Collaborate closely with the Mechanical and Electrical Engineering Managers to ensure that all engineering tasks are carried out safely and in compliance with relevant procedures and regulations. Work with the Stores Buyer to ensure economical purchasing of parts and services and to ensure critical spares are always in stock. Liaise with external contractors to effectively resource maintenance activities. Translate requirements into achievable, prioritised, and resourced work lists. Communicate engineering plans in a timely manner, clearly presenting expected time lines. Key Requirements: Completed a recognised mechanical engineering apprenticeship, preferably with a City & Guilds or equivalent NVQ qualification. Highly proficient with CMMS and SAP systems. Experience in mechanical maintenance engineering, preferably in a complex automated manufacturing environment. Self-motivated with excellent communication skills. Proficient in Microsoft Project. Demonstrated planning and organisational abilities. Desirable Qualifications: HNC qualification with 5 years' experience in maintenance engineering. Experience in manufacturing. Some supervisory experience. Hours are 7am-3:30pm Monday to Thursday, 7am-2:30pm on a Friday. Join our client's engineering team and make a real impact on their maintenance operations. If you are a proactive and organised individual with a passion for engineering planning, we want to hear from you! Apply now and take the next step in your career journey. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
May 17, 2024
Full time
Engineering Planner Are you a highly organised and motivated individual with a background in mechanical maintenance engineering? Are you looking for an exciting opportunity to join a dynamic team and play a key role in planning and coordinating maintenance activities? If so, our client is seeking an Engineering Planner to join their engineering department! Responsibilities: Build and communicate weekly and monthly maintenance schedules to ensure the completion of planned maintenance activities, ad-hoc repairs, and statutory inspections. Utilise the CMMS system to prioritise work requests, issue work orders, and plan all work and resources on a day-to-day basis. Collaborate closely with the Mechanical and Electrical Engineering Managers to ensure that all engineering tasks are carried out safely and in compliance with relevant procedures and regulations. Work with the Stores Buyer to ensure economical purchasing of parts and services and to ensure critical spares are always in stock. Liaise with external contractors to effectively resource maintenance activities. Translate requirements into achievable, prioritised, and resourced work lists. Communicate engineering plans in a timely manner, clearly presenting expected time lines. Key Requirements: Completed a recognised mechanical engineering apprenticeship, preferably with a City & Guilds or equivalent NVQ qualification. Highly proficient with CMMS and SAP systems. Experience in mechanical maintenance engineering, preferably in a complex automated manufacturing environment. Self-motivated with excellent communication skills. Proficient in Microsoft Project. Demonstrated planning and organisational abilities. Desirable Qualifications: HNC qualification with 5 years' experience in maintenance engineering. Experience in manufacturing. Some supervisory experience. Hours are 7am-3:30pm Monday to Thursday, 7am-2:30pm on a Friday. Join our client's engineering team and make a real impact on their maintenance operations. If you are a proactive and organised individual with a passion for engineering planning, we want to hear from you! Apply now and take the next step in your career journey. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Randstad Construction & Property
Leicester, Leicestershire
Job Description: We are seeking a skilled and dedicated Sub Agent to join our team for an exciting water project. The successful candidate will play a crucial role in ensuring the smooth execution and delivery of the project, working closely with the project management team and subcontractors. Responsibilities: Assist the Senior Agent in overseeing the day-to-day operations of the water project. Coordinate with subcontractors, suppliers, and other stakeholders to ensure timely delivery of materials and services. Monitor progress against project schedules and budgets, identifying any deviations and proposing corrective actions. Conduct regular site inspections to ensure compliance with health, safety, and environmental regulations. Prepare and maintain accurate documentation, including reports, drawings, and project records. Provide support to the Senior Agent in resolving any technical or logistical issues that may arise during the project. Requirements: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Proven experience working on water projects Strong understanding of construction methods, materials, and techniques relevant to water infrastructure projects. Excellent communication and interpersonal skills, with the ability to build effective working relationships with diverse stakeholders. Proficiency in project management software and tools. A proactive and problem-solving mindset, with the ability to work effectively under pressure. If you are interested, please apply with your latest CV or call (phone number removed) and ask for Elliott Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 17, 2024
Contractor
Job Description: We are seeking a skilled and dedicated Sub Agent to join our team for an exciting water project. The successful candidate will play a crucial role in ensuring the smooth execution and delivery of the project, working closely with the project management team and subcontractors. Responsibilities: Assist the Senior Agent in overseeing the day-to-day operations of the water project. Coordinate with subcontractors, suppliers, and other stakeholders to ensure timely delivery of materials and services. Monitor progress against project schedules and budgets, identifying any deviations and proposing corrective actions. Conduct regular site inspections to ensure compliance with health, safety, and environmental regulations. Prepare and maintain accurate documentation, including reports, drawings, and project records. Provide support to the Senior Agent in resolving any technical or logistical issues that may arise during the project. Requirements: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Proven experience working on water projects Strong understanding of construction methods, materials, and techniques relevant to water infrastructure projects. Excellent communication and interpersonal skills, with the ability to build effective working relationships with diverse stakeholders. Proficiency in project management software and tools. A proactive and problem-solving mindset, with the ability to work effectively under pressure. If you are interested, please apply with your latest CV or call (phone number removed) and ask for Elliott Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 17, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
First Military Recruitment Ltd
Biggleswade, Bedfordshire
LB201 - Workshop Engineer (Earth Moving) Location: Biggleswade Salary: £15 - £17.80 p/h Overview: First Military Recruitment are currently seeking a Workshop Engineer on behalf of one of our clients. Our client encourages applications from ex-military personnel however all candidates will be given due consideration. Duties and Responsibilities: Carries out routine pre delivery inspections of new machines. Fits both factory approved and local supplied extras to machines where required. Modifies machines according to guidelines and specifications. Performs all forms of repair and servicing to machines. Contributes to the repair, overhaul and diagnosis of plant equipment. Develops an effective working relationship with Workshop Engineers and the Workshop Team and can support others where required. Maintains a healthy and safe working environment for self and others through a clear understanding of workplace safety requirements and systems. Supports the roles of others ensuring administration and paperwork is completed effectively and on time as and when required. Ensures customer expectations are met by maintaining clear communication with the Workshop Supervisor. Contribute towards to the success of the apprenticeship programme by supporting and mentoring engineering apprentices. Works with the customer in mind, making sure that quality work standards are maintained consistently. Works in accordance with the company quality assurance guidelines. Is able to effectively contribute to recognising and improving work processes so as to drive greater efficiency. Uses initiative and takes appropriate action to ensure good housekeeping standards are followed and maintained in the workshop area. Ensures that self-image is a key contributor to promoting company business. Proactively seeks new opportunities to develop personal skills and looks at opportunities within the workshop to apply these. Any other duty as required by management commensurate with the post. Skills and Qualifications: Satisfactory completion of a recognised apprenticeship in a related industry to NVQ level 3. GCSE passes grades A-C in Mathematics and English. Full clean driving licence. Able to demonstrate previous experience in a similar role and / or industry. Smart and well presented. Good communicator at all levels. Flexible approach to work. Computer literate and able to demonstrate uses of IT relevant to role. Be able to travel UK & Ireland as required to support business requirements. To be able to travel overseas as required. Keep up to date on technical skills and knowledge. Attends training as required. Desirable: NVQ level 3 in heavy plant engineering. Industry related training acquired (i.e cscs cards, operator training, hose manufacture, air conditioning, etc ). Experience in major component overhaul / refurbishments. Previous experience with service software and interfaces.
May 17, 2024
Full time
LB201 - Workshop Engineer (Earth Moving) Location: Biggleswade Salary: £15 - £17.80 p/h Overview: First Military Recruitment are currently seeking a Workshop Engineer on behalf of one of our clients. Our client encourages applications from ex-military personnel however all candidates will be given due consideration. Duties and Responsibilities: Carries out routine pre delivery inspections of new machines. Fits both factory approved and local supplied extras to machines where required. Modifies machines according to guidelines and specifications. Performs all forms of repair and servicing to machines. Contributes to the repair, overhaul and diagnosis of plant equipment. Develops an effective working relationship with Workshop Engineers and the Workshop Team and can support others where required. Maintains a healthy and safe working environment for self and others through a clear understanding of workplace safety requirements and systems. Supports the roles of others ensuring administration and paperwork is completed effectively and on time as and when required. Ensures customer expectations are met by maintaining clear communication with the Workshop Supervisor. Contribute towards to the success of the apprenticeship programme by supporting and mentoring engineering apprentices. Works with the customer in mind, making sure that quality work standards are maintained consistently. Works in accordance with the company quality assurance guidelines. Is able to effectively contribute to recognising and improving work processes so as to drive greater efficiency. Uses initiative and takes appropriate action to ensure good housekeeping standards are followed and maintained in the workshop area. Ensures that self-image is a key contributor to promoting company business. Proactively seeks new opportunities to develop personal skills and looks at opportunities within the workshop to apply these. Any other duty as required by management commensurate with the post. Skills and Qualifications: Satisfactory completion of a recognised apprenticeship in a related industry to NVQ level 3. GCSE passes grades A-C in Mathematics and English. Full clean driving licence. Able to demonstrate previous experience in a similar role and / or industry. Smart and well presented. Good communicator at all levels. Flexible approach to work. Computer literate and able to demonstrate uses of IT relevant to role. Be able to travel UK & Ireland as required to support business requirements. To be able to travel overseas as required. Keep up to date on technical skills and knowledge. Attends training as required. Desirable: NVQ level 3 in heavy plant engineering. Industry related training acquired (i.e cscs cards, operator training, hose manufacture, air conditioning, etc ). Experience in major component overhaul / refurbishments. Previous experience with service software and interfaces.
Proftech Talent Ltd
Sutton Coldfield, West Midlands
Auto Electrical Engineer Are you looking for a career as an Auto Electrical Engineer? Maybe you have just finished studying and looking for an employer to work with who will train and support you. You will join an experienced service team and full training will be provided. The business specialise in the design and production of innovative vehicle safety and security products. Their products range from camera and digital video recorders through to reverse parking solutions and their customers range from individuals and small businesses through to an extensive fleet work. As an Auto Electrical Engineer you will need to have/be: Completed a relevant course/qualification such as: Level 2 Certificate in Light Vehicle Maintenance and Repair Principles. Level 2 Diploma in Auto Electrical and Mobile Electrical Competence. Level 3 Diploma in Light Vehicle Maintenance and Repair. T Level in Maintenance, Installation and Repair for Engineering and Manufacturing. Good communication skills Strong attention to detail A willingness to learn Excellent organisation and time management skills with an ability to meet deadlines Ability to act and operate independently Ability to take instruction and work well as part of a team Set high standards and take pride in your work A full driving licence as you will be required to travel with the role Details: Salary : £8.60 - £11.44 + benefits outlined below Working Hours : Full time up to 48 hours per week Monday - Friday, hours will vary depending on travel time and location Location : Fully mobile/Sutton Coldfield Duration : Permanent Role of Auto Electrical Engineer: Install, repair and maintain aftermarket safety and security systems on both small commercial vehicles and large plant Install safety systems such as DVR, Camera Systems and Side Detection Run tests on electrical components to ensure a safe and effective installation Inspect electrical systems and equipment for any damage, malfunctions, and safety hazards Test electrical components installed on the vehicle Report faults as found and liaise with customers when necessary Carry out vehicle inspections Assess and remove damaged components Complete job reports Run diagnostics on vehicles to determine faults Remove and refit vehicle trim and components Follow technical drawings and specification sheets Benefits of working as an Auto Electrical Engineer: Company van Night out allowances of £25.00 per night and £25.00 for food 20 days plus bank holidays Free onsite parking Pension scheme
May 17, 2024
Full time
Auto Electrical Engineer Are you looking for a career as an Auto Electrical Engineer? Maybe you have just finished studying and looking for an employer to work with who will train and support you. You will join an experienced service team and full training will be provided. The business specialise in the design and production of innovative vehicle safety and security products. Their products range from camera and digital video recorders through to reverse parking solutions and their customers range from individuals and small businesses through to an extensive fleet work. As an Auto Electrical Engineer you will need to have/be: Completed a relevant course/qualification such as: Level 2 Certificate in Light Vehicle Maintenance and Repair Principles. Level 2 Diploma in Auto Electrical and Mobile Electrical Competence. Level 3 Diploma in Light Vehicle Maintenance and Repair. T Level in Maintenance, Installation and Repair for Engineering and Manufacturing. Good communication skills Strong attention to detail A willingness to learn Excellent organisation and time management skills with an ability to meet deadlines Ability to act and operate independently Ability to take instruction and work well as part of a team Set high standards and take pride in your work A full driving licence as you will be required to travel with the role Details: Salary : £8.60 - £11.44 + benefits outlined below Working Hours : Full time up to 48 hours per week Monday - Friday, hours will vary depending on travel time and location Location : Fully mobile/Sutton Coldfield Duration : Permanent Role of Auto Electrical Engineer: Install, repair and maintain aftermarket safety and security systems on both small commercial vehicles and large plant Install safety systems such as DVR, Camera Systems and Side Detection Run tests on electrical components to ensure a safe and effective installation Inspect electrical systems and equipment for any damage, malfunctions, and safety hazards Test electrical components installed on the vehicle Report faults as found and liaise with customers when necessary Carry out vehicle inspections Assess and remove damaged components Complete job reports Run diagnostics on vehicles to determine faults Remove and refit vehicle trim and components Follow technical drawings and specification sheets Benefits of working as an Auto Electrical Engineer: Company van Night out allowances of £25.00 per night and £25.00 for food 20 days plus bank holidays Free onsite parking Pension scheme
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 17, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Lock Keeper - 5 month temporary role based in Leeds. Working pattern will be 4 on 2 off - 7.30 to 18.00 Working outside, providing outstanding levels of customer service - you will be a visible and approachable advocate for the work that the Canal & River Trust does. Undertake water control duties including the operation of structures eg locks and bridges in a safe manner to ensure that customers are not hindered in their visit to the waterway. Undertake key duties associated with the maintenance of the waterway and waterside eg towpath litter removal, towpath, and access repairs. Ensure that environmental and heritage issues are taken into consideration in all work that is undertaken. Provide a first response for any emergencies/incidents that may occur within the waterway. Support asset inspections. Identify and report any structure failures, breaches, damage or pollution incidents to Operations Supervisor or Engineers. Using appropriate basic tools and equipment, undertake vegetation management activities to ensuring our outdoor spaces are well maintained . Participate where agreed in the standby rota to support delivery of customer service to defined standards and reaction to emergency situations. Experience of working within relevant environment eg customer service. Comply with Canal & River Trust Health & Safety policy and defined standards, report incidents, accidents and near misses. Complete point of work risk assessments and make adjustments to work methods where appropriate. Ensure all equipment (PPE, plant, materials etc) is appropriate for the task. Skills & experience: You will have a good understanding of what great customer engagement and service looks and feels like Experience of working within relevant environment eg customer service, outdoor visitor services/maintenance/visitor attractions Basic literacy and numeracy skills. Valid driving licence appropriate for vehicle to be driven.
May 17, 2024
Contractor
Lock Keeper - 5 month temporary role based in Leeds. Working pattern will be 4 on 2 off - 7.30 to 18.00 Working outside, providing outstanding levels of customer service - you will be a visible and approachable advocate for the work that the Canal & River Trust does. Undertake water control duties including the operation of structures eg locks and bridges in a safe manner to ensure that customers are not hindered in their visit to the waterway. Undertake key duties associated with the maintenance of the waterway and waterside eg towpath litter removal, towpath, and access repairs. Ensure that environmental and heritage issues are taken into consideration in all work that is undertaken. Provide a first response for any emergencies/incidents that may occur within the waterway. Support asset inspections. Identify and report any structure failures, breaches, damage or pollution incidents to Operations Supervisor or Engineers. Using appropriate basic tools and equipment, undertake vegetation management activities to ensuring our outdoor spaces are well maintained . Participate where agreed in the standby rota to support delivery of customer service to defined standards and reaction to emergency situations. Experience of working within relevant environment eg customer service. Comply with Canal & River Trust Health & Safety policy and defined standards, report incidents, accidents and near misses. Complete point of work risk assessments and make adjustments to work methods where appropriate. Ensure all equipment (PPE, plant, materials etc) is appropriate for the task. Skills & experience: You will have a good understanding of what great customer engagement and service looks and feels like Experience of working within relevant environment eg customer service, outdoor visitor services/maintenance/visitor attractions Basic literacy and numeracy skills. Valid driving licence appropriate for vehicle to be driven.
We are recruiting for vehicle technicians to work in the Sandwell area. With a fleet size of over 1000 items, there is a huge variety of vehicles and equipment. Key Requirements Full UK HGV (Category C or C+E) Hold a BTEC National Certificate in Automotive Engineering ONC or equivalent. Take part in an out of hours breakdown service. Level 3 NVQ Automotive Maintenance and Repair or Equivalent or experience of working in Heavy Commercial Vehicle workshop. LGV Licence Unrestricted Category C. F gas licence. Fork lift operator's licence. Tail lift LOLER certification. Level 3 Award in Electric/Hybrid vehicle system repair & replacement. Hours - 37 hours per week - Rate of pay is 18.06 per hour Job Summary To undertake without supervision all major and general repairs to all types of motor vehicles and items of plant and horticultural equipment to include specialist repairs, inspections and diagnostics within the workshop and on site Your current duties and responsibilities are: - 1. Responsible to carry out all repair work and scheduled maintenance of vehicles, plant & horticultural equipment including engine, chassis, gearbox, electrical repair and preventative maintenance in-line with manufacturers specifications, best practise, DVSA road worthiness standards and service level agreements. 2. Responsible for maintaining appropriate knowledge in order to carry out vehicle inspections and MOT preparation in line with the requirements set out by the DVSA including the HGV inspection manual and Road Vehicles (Construction and Use) Regulations 2022. 3. Responsible for carrying out work on and around vehicle high voltage systems, safely and in accordance with working procedures and best practice. 4. Carry out bodywork, painting, welding and fabrication within the capabilities of the workshop. 5. Carry out diagnosis of faults on all systems using various methods and equipment such as multi-meters, EOBD readers and specialised diagnostic equipment. 6. Responsible to ensure for all work carried out with due regard to the safety and welfare of others, whilst maintaining work areas in a clean, tidy and hygienic condition with limited supervision. 7. Responsible to undertake all assigned tasks relating to vehicle/equipment repairs and maintenance within industry standard working times to meet KPI's. 8. Preparation of new fleet items for operational and road use including the application of livery, pre-delivery inspection and any required modifications in line with the service users specification. 9. Mandatory requirement to participate in Fleet Services out of hours standby, including call out and on site working to meet any stakeholders/contractual requirements on a rota basis and/or to suit business needs. 10. Responsible under the instruction of a relevant supervisor/manager to attend roadside breakdowns in all weather conditions ensuring the health, safety and well being of all vehicle/equipment, users and passengers. 11. Directly responsible for the load safety of any vehicles or assets recovered from roadside or satellite depots. 12. Responsible for lone working at various stakeholder's premises/depots, carrying out tasks using own initiative with limited or no direct supervision. 13. To carry out various driving duties including general vehicle recovery, vehicle and spares delivery/collection, including vehicle MOT presentation in accordance with service. 14. Removal of spares and equipment from obsolete fleet items. 15. Responsible to use work equipment safely and in line with working procedures. Undertaking pre-use inspections of work equipment and any minor repairs within competency, ensuring the equipment is safe to use, reporting defects to line manager. 16. Responsible for the mentoring of apprentices and/or young persons. 17. To ensure the economic use of all items of plant, equipment, spare parts, etc. 18. Required to assist a variety of stakeholders including DVSA, Taxi Licensing and West Midlands Police. 19. Required to obtain fork lift truck licence, F gas licence, Tail lift LOLER certification, Award in Electric/Hybrid vehicle system repair & replacement and any other training, certification or qualification deemed necessary for the service area. 20. To work alternating shifts to suit the business requirements. 21. To participate in the operation of the Council's Appraisal Scheme. 22. It is your responsibility to carry out your duties in line with the Council's policy on equality and be sensitive and caring to the needs of the disadvantaged, promoting a positive approach to a harmonious working environment. You should act as an exemplar on these issues and should identify and monitor training for yourself and any employees for whom you are responsible, in line with this policy and also the Equalities Act 2010. 23. Such other duties as may be appropriate to achieve the objectives of the post to assist the Service Area in the fulfilment of its objectives commensurate with the post holder's salary grade, abilities and aptitudes. 24. The post holder must at all times carry out his/her responsibilities with due regard to the Council's policy, organisation and arrangements for Health and Safety at Work. Please apply online or call (phone number removed) for further details Extra Personnel do NOT charge any fees for our services. Extra Personnel Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.
May 17, 2024
Seasonal
We are recruiting for vehicle technicians to work in the Sandwell area. With a fleet size of over 1000 items, there is a huge variety of vehicles and equipment. Key Requirements Full UK HGV (Category C or C+E) Hold a BTEC National Certificate in Automotive Engineering ONC or equivalent. Take part in an out of hours breakdown service. Level 3 NVQ Automotive Maintenance and Repair or Equivalent or experience of working in Heavy Commercial Vehicle workshop. LGV Licence Unrestricted Category C. F gas licence. Fork lift operator's licence. Tail lift LOLER certification. Level 3 Award in Electric/Hybrid vehicle system repair & replacement. Hours - 37 hours per week - Rate of pay is 18.06 per hour Job Summary To undertake without supervision all major and general repairs to all types of motor vehicles and items of plant and horticultural equipment to include specialist repairs, inspections and diagnostics within the workshop and on site Your current duties and responsibilities are: - 1. Responsible to carry out all repair work and scheduled maintenance of vehicles, plant & horticultural equipment including engine, chassis, gearbox, electrical repair and preventative maintenance in-line with manufacturers specifications, best practise, DVSA road worthiness standards and service level agreements. 2. Responsible for maintaining appropriate knowledge in order to carry out vehicle inspections and MOT preparation in line with the requirements set out by the DVSA including the HGV inspection manual and Road Vehicles (Construction and Use) Regulations 2022. 3. Responsible for carrying out work on and around vehicle high voltage systems, safely and in accordance with working procedures and best practice. 4. Carry out bodywork, painting, welding and fabrication within the capabilities of the workshop. 5. Carry out diagnosis of faults on all systems using various methods and equipment such as multi-meters, EOBD readers and specialised diagnostic equipment. 6. Responsible to ensure for all work carried out with due regard to the safety and welfare of others, whilst maintaining work areas in a clean, tidy and hygienic condition with limited supervision. 7. Responsible to undertake all assigned tasks relating to vehicle/equipment repairs and maintenance within industry standard working times to meet KPI's. 8. Preparation of new fleet items for operational and road use including the application of livery, pre-delivery inspection and any required modifications in line with the service users specification. 9. Mandatory requirement to participate in Fleet Services out of hours standby, including call out and on site working to meet any stakeholders/contractual requirements on a rota basis and/or to suit business needs. 10. Responsible under the instruction of a relevant supervisor/manager to attend roadside breakdowns in all weather conditions ensuring the health, safety and well being of all vehicle/equipment, users and passengers. 11. Directly responsible for the load safety of any vehicles or assets recovered from roadside or satellite depots. 12. Responsible for lone working at various stakeholder's premises/depots, carrying out tasks using own initiative with limited or no direct supervision. 13. To carry out various driving duties including general vehicle recovery, vehicle and spares delivery/collection, including vehicle MOT presentation in accordance with service. 14. Removal of spares and equipment from obsolete fleet items. 15. Responsible to use work equipment safely and in line with working procedures. Undertaking pre-use inspections of work equipment and any minor repairs within competency, ensuring the equipment is safe to use, reporting defects to line manager. 16. Responsible for the mentoring of apprentices and/or young persons. 17. To ensure the economic use of all items of plant, equipment, spare parts, etc. 18. Required to assist a variety of stakeholders including DVSA, Taxi Licensing and West Midlands Police. 19. Required to obtain fork lift truck licence, F gas licence, Tail lift LOLER certification, Award in Electric/Hybrid vehicle system repair & replacement and any other training, certification or qualification deemed necessary for the service area. 20. To work alternating shifts to suit the business requirements. 21. To participate in the operation of the Council's Appraisal Scheme. 22. It is your responsibility to carry out your duties in line with the Council's policy on equality and be sensitive and caring to the needs of the disadvantaged, promoting a positive approach to a harmonious working environment. You should act as an exemplar on these issues and should identify and monitor training for yourself and any employees for whom you are responsible, in line with this policy and also the Equalities Act 2010. 23. Such other duties as may be appropriate to achieve the objectives of the post to assist the Service Area in the fulfilment of its objectives commensurate with the post holder's salary grade, abilities and aptitudes. 24. The post holder must at all times carry out his/her responsibilities with due regard to the Council's policy, organisation and arrangements for Health and Safety at Work. Please apply online or call (phone number removed) for further details Extra Personnel do NOT charge any fees for our services. Extra Personnel Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.
Job Title: Loading Shovel Driver with Weighbridge Experience Location: Grantham Job Type: Full-time About Us: Prestige Recruitment are supporing our market leading client with an urgent requirement for a shovel driver that will also be responsible for operating the weighbridge. Our Client takes pride in our commitment to safety, efficiency, and environmental responsibility. As the client continues to expand, we are looking for a skilled Loading Shovel Driver with Weighbridge Experience to join our team. Job Summary: We are seeking a dedicated and experienced Loading Shovel Driver with Weighbridge expertise to efficiently and safely operate loading shovels, manage materials, and handle weighbridge operations. The successful candidate will play a crucial role in our daily operations, ensuring the smooth flow of materials and accurate recording of weights. Responsibilities: Operate loading shovel equipment efficiently and safely. Transport materials to and from designated areas within the facility. Conduct routine equipment inspections and report any maintenance issues. Manage the weighbridge operations, accurately recording weights of incoming and outgoing materials. Communicate effectively with team members to ensure smooth coordination of tasks. Adhere to safety protocols and guidelines at all times. Maintain cleanliness and organization in the working area. Requirements: Proven experience as a Loading Shovel Driver with expertise in operating loading shovels (ticket required). Familiarity with weighbridge operations and the ability to accurately record weights. Valid driver's license with a clean driving record. Ability to work independently and as part of a team. Strong communication skills and the ability to follow instructions. Knowledge of safety protocols and procedures. Flexibility to work varying shifts and weekends as needed. Benefits: Competitive salary Health insurance Retirement savings plan Opportunities for training and career development How to Apply: If you are a qualified Loading Shovel Driver with Weighbridge Experience and are excited to join a dynamic team, please submit your CV highlighting your previous experience, contact (url removed) or call Rebecca on (phone number removed)
May 17, 2024
Full time
Job Title: Loading Shovel Driver with Weighbridge Experience Location: Grantham Job Type: Full-time About Us: Prestige Recruitment are supporing our market leading client with an urgent requirement for a shovel driver that will also be responsible for operating the weighbridge. Our Client takes pride in our commitment to safety, efficiency, and environmental responsibility. As the client continues to expand, we are looking for a skilled Loading Shovel Driver with Weighbridge Experience to join our team. Job Summary: We are seeking a dedicated and experienced Loading Shovel Driver with Weighbridge expertise to efficiently and safely operate loading shovels, manage materials, and handle weighbridge operations. The successful candidate will play a crucial role in our daily operations, ensuring the smooth flow of materials and accurate recording of weights. Responsibilities: Operate loading shovel equipment efficiently and safely. Transport materials to and from designated areas within the facility. Conduct routine equipment inspections and report any maintenance issues. Manage the weighbridge operations, accurately recording weights of incoming and outgoing materials. Communicate effectively with team members to ensure smooth coordination of tasks. Adhere to safety protocols and guidelines at all times. Maintain cleanliness and organization in the working area. Requirements: Proven experience as a Loading Shovel Driver with expertise in operating loading shovels (ticket required). Familiarity with weighbridge operations and the ability to accurately record weights. Valid driver's license with a clean driving record. Ability to work independently and as part of a team. Strong communication skills and the ability to follow instructions. Knowledge of safety protocols and procedures. Flexibility to work varying shifts and weekends as needed. Benefits: Competitive salary Health insurance Retirement savings plan Opportunities for training and career development How to Apply: If you are a qualified Loading Shovel Driver with Weighbridge Experience and are excited to join a dynamic team, please submit your CV highlighting your previous experience, contact (url removed) or call Rebecca on (phone number removed)
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 17, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Machine Operator Crediton, Devon Temp to Perm opportunity. gap personnel Exeter, are currently recruiting for a Machine Operator for a temp to perm placement based in Crediton, Devon. You will be joining a friendly and growing subcontractor machining company. As a CNC Setter your duties will include: Running CNC machines. Deburr small and large precision Components. General inspection to make sure parts are running fine. General housekeeping tasks such as cleaning machines, topping up coolants, and moving parts on. Running manual Lathes and Mills. About You: Keen eye for detail Good hand/eye coordination Previous experience at setting CNC machines to a high standard. Excellent verbal communication skills. Basic understanding of programming Competent at reading, understanding and working with engineering technical drawings. Working Hours & Pay: Hours: Monday to Thursday, 0800am 1700pm, Friday, 0700am-1300pm £12.00 per hour, Overtime available after 40hours. Key skills; CNC, Setter, Machine Operator, Programming, Turning, Milling, production operative. Successful candidates will be pro-active team workers, liaising and co-operating with all members of staff. Operate within the confines of company policy and procedure requirements, including integrity and confidentiality in respect of the business. Abide by health and safety legislation in respect of yourself and others. Sound like the job for you? Click APPLY to upload your CV and one of our friendly team will be in contact. Don t have a CV? Call the office on (phone number removed) and we will help you with your registration. gap personnel is operating as a recruitment business
May 17, 2024
Seasonal
Machine Operator Crediton, Devon Temp to Perm opportunity. gap personnel Exeter, are currently recruiting for a Machine Operator for a temp to perm placement based in Crediton, Devon. You will be joining a friendly and growing subcontractor machining company. As a CNC Setter your duties will include: Running CNC machines. Deburr small and large precision Components. General inspection to make sure parts are running fine. General housekeeping tasks such as cleaning machines, topping up coolants, and moving parts on. Running manual Lathes and Mills. About You: Keen eye for detail Good hand/eye coordination Previous experience at setting CNC machines to a high standard. Excellent verbal communication skills. Basic understanding of programming Competent at reading, understanding and working with engineering technical drawings. Working Hours & Pay: Hours: Monday to Thursday, 0800am 1700pm, Friday, 0700am-1300pm £12.00 per hour, Overtime available after 40hours. Key skills; CNC, Setter, Machine Operator, Programming, Turning, Milling, production operative. Successful candidates will be pro-active team workers, liaising and co-operating with all members of staff. Operate within the confines of company policy and procedure requirements, including integrity and confidentiality in respect of the business. Abide by health and safety legislation in respect of yourself and others. Sound like the job for you? Click APPLY to upload your CV and one of our friendly team will be in contact. Don t have a CV? Call the office on (phone number removed) and we will help you with your registration. gap personnel is operating as a recruitment business
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 17, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
RPS is looking for Trainee Leakage Engineers to join our Water Operations Division in Wales. Roles are currently available in Carmarthenshire . Our team of Leakage Engineers are at the heart of our strategic priorities - to deliver great work for our clients by providing excellent customer service and executing complex operational tasks. Whether you are just starting out or taking the next step in your career, this position provides an opportunity for you to progress with RPS. This is a permanent, full time position working Monday to Friday 07:00 - 15:30 plus overtime, bonus and benefits and pays real living wage. You will also be allocated a company van. We are only interested in candidates in the Carmarthenshire at this time. We're RPS, our projects are all around you. We define, design, and manage projects that create shared value to a complex, urbanising and resource-scarce world. Our people are our success. We need people who share our passion on solving the problems that matter. And where you'll be supported every step of the way. Here is where you come to build a career. What you'll be doing This is a great first step in to a career in the water industry and full training and one-to-one mentorship will be provided. Reporting to the Team Leader, you will ensure the delivery of leakage reduction by using your expertise to resolve complex operational issues that will include detecting both proactive and reactive leaks on our clients' network using a combination of methods • Assess, diagnose, and determine the most appropriate solution to reduce leakage and fully support the delivery of regulatory targets and work to pinpoint leakage with a level of accuracy that delivers a great service for clients • Ensuring that Health and Safety is maintained • Achieving KPI targets and delivering leakage detection/reduction within DMA's • Attending excavations requested by R&M to assist leak location • Training and mentoring assistant leakage Technicians • Assuming responsibility for general admin tasks, i.e., electronic timesheets submissions, weekly vehicle checks and defect reporting • Forming and maintaining excellent working relationships with colleagues, contractors, and the client Who we're looking for? • Any prior experience working in a similar role is useful however we will train you in water network hydraulics, leakage detection techniques, monitoring/reporting of leakage levels and other issues associated with the clean water industry • You will want to learn and build a knowledge of utility tracing, noise logging and step-testing planning/operation to allow you to build your experience of leakage monitoring, pressure/flow and flow data capture techniques and methods. Above all you will be open and willing to learn new methods • Able to work well under pressure and to conflicting deadlines whilst maintaining attention to detail and high levels of standards • Team player who wants to solve problems within defined procedures and is flexible, co-operative attitude to working and giving and receiving help and sharing knowledge • Great written and verbal communication skills • Customer focussed and able to build and maintain great working relationships • Able to work quickly and accurately report on findings • Full UK driving or Irish Driving Licence What's in it for you? We support our people to build meaningful careers. Here you'll find true support and encouragement. We're an accredited training provider and we support learning and development for everyone. A personal development plan and a transparent career pathway puts you in the driving seat of your career and you'll be supported as far as you want to go. RPS, a Tetra Tech company Representing an exciting new chapter in our business, in January 2023 RPS became a Tetra Tech company. With 27,000 employees in more than 550 offices in more than 120 countries on seven continents, Tetra Tech is a leading global provider of consulting and engineering services. As a Tetra Tech company, RPS is proud to offer our people market leading development and project opportunities, helping to solve some of the world's most complex problems. What happens next? If we feel you are a good match, we will be in touch to arrange a competency interview. If this opportunity suits your career journey, we'd love to hear from you. All applications will be considered. Ready to apply? Please have your CV ready and continue with your application online. Health and Safety This role may involve: • Moving heavy items including inspection chamber covers • Working in all weather conditions (this could include night work also) Please note mandatory drugs and alcohol tests are undertaken for this role and a DBS check will be undertaken
May 17, 2024
Full time
RPS is looking for Trainee Leakage Engineers to join our Water Operations Division in Wales. Roles are currently available in Carmarthenshire . Our team of Leakage Engineers are at the heart of our strategic priorities - to deliver great work for our clients by providing excellent customer service and executing complex operational tasks. Whether you are just starting out or taking the next step in your career, this position provides an opportunity for you to progress with RPS. This is a permanent, full time position working Monday to Friday 07:00 - 15:30 plus overtime, bonus and benefits and pays real living wage. You will also be allocated a company van. We are only interested in candidates in the Carmarthenshire at this time. We're RPS, our projects are all around you. We define, design, and manage projects that create shared value to a complex, urbanising and resource-scarce world. Our people are our success. We need people who share our passion on solving the problems that matter. And where you'll be supported every step of the way. Here is where you come to build a career. What you'll be doing This is a great first step in to a career in the water industry and full training and one-to-one mentorship will be provided. Reporting to the Team Leader, you will ensure the delivery of leakage reduction by using your expertise to resolve complex operational issues that will include detecting both proactive and reactive leaks on our clients' network using a combination of methods • Assess, diagnose, and determine the most appropriate solution to reduce leakage and fully support the delivery of regulatory targets and work to pinpoint leakage with a level of accuracy that delivers a great service for clients • Ensuring that Health and Safety is maintained • Achieving KPI targets and delivering leakage detection/reduction within DMA's • Attending excavations requested by R&M to assist leak location • Training and mentoring assistant leakage Technicians • Assuming responsibility for general admin tasks, i.e., electronic timesheets submissions, weekly vehicle checks and defect reporting • Forming and maintaining excellent working relationships with colleagues, contractors, and the client Who we're looking for? • Any prior experience working in a similar role is useful however we will train you in water network hydraulics, leakage detection techniques, monitoring/reporting of leakage levels and other issues associated with the clean water industry • You will want to learn and build a knowledge of utility tracing, noise logging and step-testing planning/operation to allow you to build your experience of leakage monitoring, pressure/flow and flow data capture techniques and methods. Above all you will be open and willing to learn new methods • Able to work well under pressure and to conflicting deadlines whilst maintaining attention to detail and high levels of standards • Team player who wants to solve problems within defined procedures and is flexible, co-operative attitude to working and giving and receiving help and sharing knowledge • Great written and verbal communication skills • Customer focussed and able to build and maintain great working relationships • Able to work quickly and accurately report on findings • Full UK driving or Irish Driving Licence What's in it for you? We support our people to build meaningful careers. Here you'll find true support and encouragement. We're an accredited training provider and we support learning and development for everyone. A personal development plan and a transparent career pathway puts you in the driving seat of your career and you'll be supported as far as you want to go. RPS, a Tetra Tech company Representing an exciting new chapter in our business, in January 2023 RPS became a Tetra Tech company. With 27,000 employees in more than 550 offices in more than 120 countries on seven continents, Tetra Tech is a leading global provider of consulting and engineering services. As a Tetra Tech company, RPS is proud to offer our people market leading development and project opportunities, helping to solve some of the world's most complex problems. What happens next? If we feel you are a good match, we will be in touch to arrange a competency interview. If this opportunity suits your career journey, we'd love to hear from you. All applications will be considered. Ready to apply? Please have your CV ready and continue with your application online. Health and Safety This role may involve: • Moving heavy items including inspection chamber covers • Working in all weather conditions (this could include night work also) Please note mandatory drugs and alcohol tests are undertaken for this role and a DBS check will be undertaken
Do you have experience in leakage detection techniques, monitoring and reporting of leakage levels in the clean water industry? The RPS Asset Survey and Inspection team has multiple opportunities available for experienced leakage engineers across all regions in West Wales . We are experiencing a period of consistent growth and this is an exciting time to join an expanding team. We will provide you with a structured career development pathway allowing you to take your career to the next level. Here is where you come to build a career. What you'll be doing • Delivery of leakage reduction by resolving complex operational issues that will include detecting both proactive and reactive leaks on our clients' network. • Assess, diagnose, and determine the most appropriate solution to reduce leakage and fully support the delivery of regulatory targets • Ensuring that Health and Safety is maintained • Achieving KPI targets and delivering leakage detection/reduction within DMA's • Attending excavations to assist leak location • Training and mentoring Assistant Leakage Technicians • Assuming responsibility for general admin tasks, e.g., electronic timesheets submissions, weekly vehicle checks and defect reporting Who we're looking for? • Previous experience as a leakage engineer with a good understanding of water network schematics and leak noise correlators and plans • All-round knowledge of water network hydraulics, leakage detection techniques, monitoring and reporting of leakage levels • Experience of utility tracing, noise logging and step-testing planning/operation and experience of leakage monitoring - pressure/flow and flow data capture techniques and methods • Able to work well under pressure and to conflicting deadlines whilst maintaining attention to detail and high levels of standards • Solution oriented Team player who can work efficiently within defined procedures • Great written and verbal communication skills • Customer focused and able to build and maintain great working relationships with colleagues, contractors and the client • Full UK driving licence RPS, A Tetra Tech company - representing an exciting new chapter in our business, RPS became a Tetra Tech company in January 2023. With 27,000 employees in more than 550 offices in more than 120 countries on seven continents, Tetra Tech is a leading, global provider of consulting and engineering services. As a Tetra Tech company, RPS is proud to offer our people market-leading development and project opportunities, helping to solve some of the world's most complex problems. What's in it for you? Here you'll find true support and encouragement. We're an accredited training provider and we support learning and development for everyone. A personal development plan and a transparent career pathway puts you in the driving seat of your career and you'll be supported as far as you want to go. We encourage and value different ideas, perspectives, and styles of thinking. We need a mix of experiences and skills to develop the most innovative ideas. We respect one another and recognise the potential and contribution of everyone. You'll be joining a diverse community and a company that puts its people first and prioritises their wellbeing. What happens next? If we feel you are a good match, we will be in touch to arrange a competency interview. All applications will be considered. Ready to apply? Please have your CV ready and continue with your application online. Health and Safety This role will involve: • Moving heavy items including manhole covers • Working in all weather conditions (this could include night work also) Please note mandatory drugs and alcohol tests are undertaken for this role
May 17, 2024
Full time
Do you have experience in leakage detection techniques, monitoring and reporting of leakage levels in the clean water industry? The RPS Asset Survey and Inspection team has multiple opportunities available for experienced leakage engineers across all regions in West Wales . We are experiencing a period of consistent growth and this is an exciting time to join an expanding team. We will provide you with a structured career development pathway allowing you to take your career to the next level. Here is where you come to build a career. What you'll be doing • Delivery of leakage reduction by resolving complex operational issues that will include detecting both proactive and reactive leaks on our clients' network. • Assess, diagnose, and determine the most appropriate solution to reduce leakage and fully support the delivery of regulatory targets • Ensuring that Health and Safety is maintained • Achieving KPI targets and delivering leakage detection/reduction within DMA's • Attending excavations to assist leak location • Training and mentoring Assistant Leakage Technicians • Assuming responsibility for general admin tasks, e.g., electronic timesheets submissions, weekly vehicle checks and defect reporting Who we're looking for? • Previous experience as a leakage engineer with a good understanding of water network schematics and leak noise correlators and plans • All-round knowledge of water network hydraulics, leakage detection techniques, monitoring and reporting of leakage levels • Experience of utility tracing, noise logging and step-testing planning/operation and experience of leakage monitoring - pressure/flow and flow data capture techniques and methods • Able to work well under pressure and to conflicting deadlines whilst maintaining attention to detail and high levels of standards • Solution oriented Team player who can work efficiently within defined procedures • Great written and verbal communication skills • Customer focused and able to build and maintain great working relationships with colleagues, contractors and the client • Full UK driving licence RPS, A Tetra Tech company - representing an exciting new chapter in our business, RPS became a Tetra Tech company in January 2023. With 27,000 employees in more than 550 offices in more than 120 countries on seven continents, Tetra Tech is a leading, global provider of consulting and engineering services. As a Tetra Tech company, RPS is proud to offer our people market-leading development and project opportunities, helping to solve some of the world's most complex problems. What's in it for you? Here you'll find true support and encouragement. We're an accredited training provider and we support learning and development for everyone. A personal development plan and a transparent career pathway puts you in the driving seat of your career and you'll be supported as far as you want to go. We encourage and value different ideas, perspectives, and styles of thinking. We need a mix of experiences and skills to develop the most innovative ideas. We respect one another and recognise the potential and contribution of everyone. You'll be joining a diverse community and a company that puts its people first and prioritises their wellbeing. What happens next? If we feel you are a good match, we will be in touch to arrange a competency interview. All applications will be considered. Ready to apply? Please have your CV ready and continue with your application online. Health and Safety This role will involve: • Moving heavy items including manhole covers • Working in all weather conditions (this could include night work also) Please note mandatory drugs and alcohol tests are undertaken for this role
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 17, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership worldwide, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary - £35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance referral Scheme (£1000 for successful referral) Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. As a Rebuild Repair Engineer you will be based in one of Finning's workshops, It will be your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background plant machinery or similar industries i.e. HGV / agriculture Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you are a Workshop Technician, HGV Mechanic, Construction Plant Fitter or Diesel Fitter / Mechanic and have experience working on Plant or Agricultural machinery or HGV's and would like to join an industry leading organisation then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
The Recruitment Co are currently recruiting for Electrical Engineers to work for an established, growing business in the Blackpool area. Electrical Engineer salary: 31,800 Electrical Engineer hours: Week 1 between 8.30am to 4.30pm Monday to Friday (37.5 hours per week) Week 2 Tuesday to Friday 8am - 4.30pm Saturday 6am - 2.30pm Electrical Engineer company benefits: Car Parking Employee benefit schemes Competitive pension scheme 25 days holiday + Bank Holidays Electrical Engineer Roles and responsibilities: Actively Learn all aspect of maintenance department Participate in, on the job training Attend all H&S and business-related course & briefings Preventative Maintenance System Update and maintain the schedule Conduct walk rounds and visual inspection Conduct Planned Preventative Maintenance of all equipment Breakdown and Repairs Mechanical Electrical where permitted (legally) Plumbing To be part of the 'call out' team New systems installation Electrical installations, cable routing etc - non-electrician work Mechanical installations Pipe work around factory Paperwork checks Logistics Control of cost center and ordering Raising and checking purchase orders - to be handed to Maintenance Manager Obtaining quotes for work required Time sheets work and liaising with 3 rd party contractors Purchasing consumables Administration Help in the preparation and implementing/ training out of, Risk Assessments (RA) Standard Operating Procedures (SOP) Preparing Method Statements for tasks and jobs to be done Training of other Maintenance team members & operational staff Control of contractors and their paper work Utility Supervision Participate in the energy management system Check sampling equipment Cold rooms running to correct temperatures & settings Actively monitor and challenge water usage & wastage Electrical Engineer Qualifications / Experience Required: Existing mechanical engineering qualification, or currently working towards same Working towards or has 18 th edition electrical qualification Effective Communication Skills between all levels within the business Time Management - ability to work to set deadlines Ability to work as part of a team and also confident / competent to work on own Microsoft Office Skills (Excel & Word proficient), Outlook Express (Task and Diary management), Working knowledge of electrics Understanding of the 'Permit to work' system Driving Licence (clean/current) CCTV Knowledge IOSH Managing Safely Welding and fabrication Carpentry & Plumbing Refrigeration knowledge Knowledge of PLC units Understanding of Bulgarian Language Previously worked in a Food manufacturing environment Knowledge of food safety (Basic Hygiene) An understanding of health and safety requirements and implementation in the workplace. Training towards or achieved CIEH Level 3 Awards in Food Safety Ability to issue permits under the permit to work system If this sounds of interest, please do feel free to apply through the link below, or alternatively please do get in touch on (phone number removed) and I will be happy to discuss further! The Recruitment Co are an equal opportunities employer. CPBlackpoolOther The Recruitment Co. is an equal opportunities employer and we're committed to diversity and inclusion in the workplace.
May 17, 2024
Full time
The Recruitment Co are currently recruiting for Electrical Engineers to work for an established, growing business in the Blackpool area. Electrical Engineer salary: 31,800 Electrical Engineer hours: Week 1 between 8.30am to 4.30pm Monday to Friday (37.5 hours per week) Week 2 Tuesday to Friday 8am - 4.30pm Saturday 6am - 2.30pm Electrical Engineer company benefits: Car Parking Employee benefit schemes Competitive pension scheme 25 days holiday + Bank Holidays Electrical Engineer Roles and responsibilities: Actively Learn all aspect of maintenance department Participate in, on the job training Attend all H&S and business-related course & briefings Preventative Maintenance System Update and maintain the schedule Conduct walk rounds and visual inspection Conduct Planned Preventative Maintenance of all equipment Breakdown and Repairs Mechanical Electrical where permitted (legally) Plumbing To be part of the 'call out' team New systems installation Electrical installations, cable routing etc - non-electrician work Mechanical installations Pipe work around factory Paperwork checks Logistics Control of cost center and ordering Raising and checking purchase orders - to be handed to Maintenance Manager Obtaining quotes for work required Time sheets work and liaising with 3 rd party contractors Purchasing consumables Administration Help in the preparation and implementing/ training out of, Risk Assessments (RA) Standard Operating Procedures (SOP) Preparing Method Statements for tasks and jobs to be done Training of other Maintenance team members & operational staff Control of contractors and their paper work Utility Supervision Participate in the energy management system Check sampling equipment Cold rooms running to correct temperatures & settings Actively monitor and challenge water usage & wastage Electrical Engineer Qualifications / Experience Required: Existing mechanical engineering qualification, or currently working towards same Working towards or has 18 th edition electrical qualification Effective Communication Skills between all levels within the business Time Management - ability to work to set deadlines Ability to work as part of a team and also confident / competent to work on own Microsoft Office Skills (Excel & Word proficient), Outlook Express (Task and Diary management), Working knowledge of electrics Understanding of the 'Permit to work' system Driving Licence (clean/current) CCTV Knowledge IOSH Managing Safely Welding and fabrication Carpentry & Plumbing Refrigeration knowledge Knowledge of PLC units Understanding of Bulgarian Language Previously worked in a Food manufacturing environment Knowledge of food safety (Basic Hygiene) An understanding of health and safety requirements and implementation in the workplace. Training towards or achieved CIEH Level 3 Awards in Food Safety Ability to issue permits under the permit to work system If this sounds of interest, please do feel free to apply through the link below, or alternatively please do get in touch on (phone number removed) and I will be happy to discuss further! The Recruitment Co are an equal opportunities employer. CPBlackpoolOther The Recruitment Co. is an equal opportunities employer and we're committed to diversity and inclusion in the workplace.
Job title: Quality Inspector (Electrical) Job type: Contract Start date: ASAP - Subject to clearance Duration: 12 months Pay rate: Up to £60 an hour Umbrella / £45.27 an hour PAYE Location: Rosyth Hours of work: 37 hours per week Focussed on providing high quality EC&I inspection services on behalf of the Stage 2 collaborative project team and supporting the Stage 2 Quality Manager in ensuring that all CE&I related SDP Stage 2 works are carried out in accordance with the client s, regulatory and legislative requirements and that the products and systems meet design intent. • Proactively support and advise the SDP Stage 2 Project on CE&I quality matters. • Attend Quality, Engineering and Start-Up meetings with contractors / suppliers, as required. • Approval of Suppliers and Contractors quality related documents including the review and approval of Quality Plans and Inspection and Test Plans to ensure that the activities provide the evidential trail that design intent will be met. • Ensuring processes are in place to prevent Counterfeit, Foreign and Suspect Items entering the SDP supply chain. • Inspection at the contractor s / supplier s premises. • Ensure all measuring equipment is calibrated and in date. • Receipt inspection of equipment and ancillaries at the Rosyth site. • Inspection of electrical installation work. • Completion of Inspection and Check Lists / Certificates. • Sign-off of Quality Plans and Inspection and Test Plans. • Review of Lifetime Records (CE&I) • Contribute to Lessons learnt. • Contribute to the performance assessment of contractors and suppliers. • Contribute to the performance assessment of SDP. • To assist the SDP Stage 2 Quality Manager in ensuring that any quality non-conformances / quality issues are managed and closed out. • Willing to travel to supplier locations / sites throughout the UK and occasionally overseas. Essential: • 3 years + experience as a CE&I Inspector • Recognised qualifications such as a degree in electrical engineering and / or HNC or HND with relevant experience. • Certified to Wiring Regulations 18th Edition.
May 17, 2024
Contractor
Job title: Quality Inspector (Electrical) Job type: Contract Start date: ASAP - Subject to clearance Duration: 12 months Pay rate: Up to £60 an hour Umbrella / £45.27 an hour PAYE Location: Rosyth Hours of work: 37 hours per week Focussed on providing high quality EC&I inspection services on behalf of the Stage 2 collaborative project team and supporting the Stage 2 Quality Manager in ensuring that all CE&I related SDP Stage 2 works are carried out in accordance with the client s, regulatory and legislative requirements and that the products and systems meet design intent. • Proactively support and advise the SDP Stage 2 Project on CE&I quality matters. • Attend Quality, Engineering and Start-Up meetings with contractors / suppliers, as required. • Approval of Suppliers and Contractors quality related documents including the review and approval of Quality Plans and Inspection and Test Plans to ensure that the activities provide the evidential trail that design intent will be met. • Ensuring processes are in place to prevent Counterfeit, Foreign and Suspect Items entering the SDP supply chain. • Inspection at the contractor s / supplier s premises. • Ensure all measuring equipment is calibrated and in date. • Receipt inspection of equipment and ancillaries at the Rosyth site. • Inspection of electrical installation work. • Completion of Inspection and Check Lists / Certificates. • Sign-off of Quality Plans and Inspection and Test Plans. • Review of Lifetime Records (CE&I) • Contribute to Lessons learnt. • Contribute to the performance assessment of contractors and suppliers. • Contribute to the performance assessment of SDP. • To assist the SDP Stage 2 Quality Manager in ensuring that any quality non-conformances / quality issues are managed and closed out. • Willing to travel to supplier locations / sites throughout the UK and occasionally overseas. Essential: • 3 years + experience as a CE&I Inspector • Recognised qualifications such as a degree in electrical engineering and / or HNC or HND with relevant experience. • Certified to Wiring Regulations 18th Edition.