Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
May 18, 2024
Contractor
Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
Junior / Graduate Process Engineer 29,000 - 33,000 per annum + Training + Clear Progression + Quarterly Bonuses + Benefits Mon - Friday, 8:00am - 5:00pm, 2:00pm Friday Crediton (Commutable from Exeter, Tiverton) Are you an Engineering/Science Graduate or Process Engineer interested in joining a leading engineering company offering first class training, lucrative quarterly bonuses, early Friday finishes, and an excellent benefits package? Do you want to a role that provides a genuine platform for development and a clear progression path to greater financial packages? My client is an established manufacturer of high-end bespoke PCB products, and they are looking for a Process Engineer to join their team. The company have a fantastic portfolio of huge blue-chip customers, including BAE Systems, MOD, and the NHS, and they are on an exciting growth trajectory. Your engineering knowledge and analytical skills with guide you in monitoring production efficiency and implementing improved processes to ultimately make production more streamline with reduced waste. First class training will be provided, which will see you moving up a clear progression path to more senior roles with enhanced financial packages. Regular overtime is available, alongside quarterly bonuses and an excellent benefits package. If you are a Process Engineer or Engineering Graduate looking for a role offering training, benefits, overtime, and a clear progression path, then this is the role for you. For further details, please click apply and contact - Thaddee Rolland - REF3503 - (phone number removed). (url removed) The Role: Process Engineer - Electronics Monitoring and improving production efficiency to streamline process and reduce waste Monday to Friday 8am-5pm, early finish Friday (2pm) The Candidate: Engineering/Scientific degree or experience working as a Process Engineer Looking for a role offering development and progression opportunities Commutable to Crediton Revorec Recruitment Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. process engineer graduate engineer junior engineer entry level engineering process LEAN Six sigma 6 sigma manufacturing graduate grad junior technician electronics PCB aerospace mechanical electrical chemical Crediton Devon Exeter Tiverton Copplestone
May 17, 2024
Full time
Junior / Graduate Process Engineer 29,000 - 33,000 per annum + Training + Clear Progression + Quarterly Bonuses + Benefits Mon - Friday, 8:00am - 5:00pm, 2:00pm Friday Crediton (Commutable from Exeter, Tiverton) Are you an Engineering/Science Graduate or Process Engineer interested in joining a leading engineering company offering first class training, lucrative quarterly bonuses, early Friday finishes, and an excellent benefits package? Do you want to a role that provides a genuine platform for development and a clear progression path to greater financial packages? My client is an established manufacturer of high-end bespoke PCB products, and they are looking for a Process Engineer to join their team. The company have a fantastic portfolio of huge blue-chip customers, including BAE Systems, MOD, and the NHS, and they are on an exciting growth trajectory. Your engineering knowledge and analytical skills with guide you in monitoring production efficiency and implementing improved processes to ultimately make production more streamline with reduced waste. First class training will be provided, which will see you moving up a clear progression path to more senior roles with enhanced financial packages. Regular overtime is available, alongside quarterly bonuses and an excellent benefits package. If you are a Process Engineer or Engineering Graduate looking for a role offering training, benefits, overtime, and a clear progression path, then this is the role for you. For further details, please click apply and contact - Thaddee Rolland - REF3503 - (phone number removed). (url removed) The Role: Process Engineer - Electronics Monitoring and improving production efficiency to streamline process and reduce waste Monday to Friday 8am-5pm, early finish Friday (2pm) The Candidate: Engineering/Scientific degree or experience working as a Process Engineer Looking for a role offering development and progression opportunities Commutable to Crediton Revorec Recruitment Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. process engineer graduate engineer junior engineer entry level engineering process LEAN Six sigma 6 sigma manufacturing graduate grad junior technician electronics PCB aerospace mechanical electrical chemical Crediton Devon Exeter Tiverton Copplestone
We have an opportunity available for a Carbon Filter Technician and Trainee Plastic Fabricator to join our team based at our Bridgewater site . You will join us on a full-time, permanent basis and in return you will receive a competitive salary. Monmouth Scientific Limited (MSL) is a market leading UK based manufacturer of clean air solutions (Filtration Fume Cabinets, Biological Safety Cabinets, Laminar Air, and ISO Class Cleanrooms) for a diverse market base including laboratory, research, pathology, forensics, pharmaceutical, electronics and aerospace. Responsibilities of the Carbon Filter Technician will include: To assemble the correct size and type of Filter required which involves cutting the cloth material to size, adding the correct Carbon granules, operating a hot pneumatic press oven, fitting accessories if required and finally labelling and wrapping each product. Pick items from the relevant parts list. Learn how to weld a variety of plastics starting with the carbon filter cases required in the filter production process (Full training will be given). Full training will be provided to teach the successful applicant on the production of carbon filters and in the role of plastic fabricator. To monitor and maintain a stock of frequently used Carbon and all other generic parts. To check off (stock) deliveries and assist with Stock Checks and ensuring that figures are accurate ongoing. To work in a structured and tidy manner, with good organisational skills, keeping the relevant Production areas clean & tidy. To replenish shelves as necessary and move stock if required. To liaise with all other departments as required. To assist Department with workload as required. To have a good eye for neatness and detail and be able to neatly record all tests against the required test parameters. To assist with ad hoc duties, when necessary, which may include, but not be limited to: Local van collection and deliveries some Forklift driving (Forklift Training will be given if required but not essential) To assist with (heavy) lifting tasks, once fully trained in correct manual handling techniques. Basic machine operation. (Training will be given) Read manufacturing drawings (Training will be given) Essential key skills we're looking for in our Carbon Filter Technician: Attention to detail and ability to work with a good level of accuracy. Good workload management skills, and ability to respond to changing priorities. Ability to follow processes and quality-controlled standards of work, in line with Company procedures and guidelines. Willingness to work flexibly, and ability to work under pressure and meet targets and deadlines, with minimal management supervision. Demonstrate high personal standards and a 'driven' approach to work, willing to accept responsibility. Representing Monmouth in a professional, well presented, and courteous manner at all times. Adhering to all Health & Safety Policies issued by the Company at all times. If you think that you have the skills and experience to become our Carbon Filter Technician , click 'apply' today to submit your CV and covering letter detailing your salary expectations. We'd love to hear from you! We are an Equal Opportunities employer and welcome applications from all who meet our selection criteria. Please note, it is unlawful to employ a person who does not have 'entitlement and eligibility' to work in the UK, so please ensure you have this permission before applying. By applying for this role ( Carbon Filter Technician ), you agree to us sharing your data with those responsible for recruitment & training, purely for the purpose of this recruitment campaign. Applicants who demonstrate competency in the key selection criteria and most closely match our requirements will be short-listed for a brief telephone interview soon after the closing date. If you are successful at this first stage, you will be invited to a more formal Interview at our Bridgwater Head Office. Applications will be accepted by post, e-mail or in-person to our reception area. All applications received by the closing date will be acknowledged. We cannot accept responsibility for late applications or those lost in the post or e-mail system. No Agencies please.
May 12, 2024
Full time
We have an opportunity available for a Carbon Filter Technician and Trainee Plastic Fabricator to join our team based at our Bridgewater site . You will join us on a full-time, permanent basis and in return you will receive a competitive salary. Monmouth Scientific Limited (MSL) is a market leading UK based manufacturer of clean air solutions (Filtration Fume Cabinets, Biological Safety Cabinets, Laminar Air, and ISO Class Cleanrooms) for a diverse market base including laboratory, research, pathology, forensics, pharmaceutical, electronics and aerospace. Responsibilities of the Carbon Filter Technician will include: To assemble the correct size and type of Filter required which involves cutting the cloth material to size, adding the correct Carbon granules, operating a hot pneumatic press oven, fitting accessories if required and finally labelling and wrapping each product. Pick items from the relevant parts list. Learn how to weld a variety of plastics starting with the carbon filter cases required in the filter production process (Full training will be given). Full training will be provided to teach the successful applicant on the production of carbon filters and in the role of plastic fabricator. To monitor and maintain a stock of frequently used Carbon and all other generic parts. To check off (stock) deliveries and assist with Stock Checks and ensuring that figures are accurate ongoing. To work in a structured and tidy manner, with good organisational skills, keeping the relevant Production areas clean & tidy. To replenish shelves as necessary and move stock if required. To liaise with all other departments as required. To assist Department with workload as required. To have a good eye for neatness and detail and be able to neatly record all tests against the required test parameters. To assist with ad hoc duties, when necessary, which may include, but not be limited to: Local van collection and deliveries some Forklift driving (Forklift Training will be given if required but not essential) To assist with (heavy) lifting tasks, once fully trained in correct manual handling techniques. Basic machine operation. (Training will be given) Read manufacturing drawings (Training will be given) Essential key skills we're looking for in our Carbon Filter Technician: Attention to detail and ability to work with a good level of accuracy. Good workload management skills, and ability to respond to changing priorities. Ability to follow processes and quality-controlled standards of work, in line with Company procedures and guidelines. Willingness to work flexibly, and ability to work under pressure and meet targets and deadlines, with minimal management supervision. Demonstrate high personal standards and a 'driven' approach to work, willing to accept responsibility. Representing Monmouth in a professional, well presented, and courteous manner at all times. Adhering to all Health & Safety Policies issued by the Company at all times. If you think that you have the skills and experience to become our Carbon Filter Technician , click 'apply' today to submit your CV and covering letter detailing your salary expectations. We'd love to hear from you! We are an Equal Opportunities employer and welcome applications from all who meet our selection criteria. Please note, it is unlawful to employ a person who does not have 'entitlement and eligibility' to work in the UK, so please ensure you have this permission before applying. By applying for this role ( Carbon Filter Technician ), you agree to us sharing your data with those responsible for recruitment & training, purely for the purpose of this recruitment campaign. Applicants who demonstrate competency in the key selection criteria and most closely match our requirements will be short-listed for a brief telephone interview soon after the closing date. If you are successful at this first stage, you will be invited to a more formal Interview at our Bridgwater Head Office. Applications will be accepted by post, e-mail or in-person to our reception area. All applications received by the closing date will be acknowledged. We cannot accept responsibility for late applications or those lost in the post or e-mail system. No Agencies please.
Assembly Technician Aerospace Havant Up to £15.40 per hour On Going Contract Our client based in the Havant area is looking to recruit Assembly Technicians for the aerospace industry. Working at their site in Havant the role would involve, disassembling faulty aerospace components, building them together into complex parts and using various methods to test and inspect. You would be working in the MRO team (Maintenance, Repair and Overhaul). The successful candidate will: Assemble, teardown and rebuild hydraulic LRU's (Line replacement units) returning from the field for repair or overhaul. Reports to the Production Team Leader/ Area Manager in MRO. Teardown, re-assemble LRU's Ensure activities are performed correctly and proper tooling and documentation is used. Perform visual inspection, identify any defective items and handle according to established procedures. Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, Arbor press, vices, soldering iron, depth micrometres, callipers, lockwire pliers, dial indicators, pressure gauges, flow meters, multi-meters, test boxes or specialized test equipment as needed. Proficient interpreting and using drawings. Material preparation including lapping of surfaces with proper tooling techniques and compounds. Perform cross training when required. Proactively identify and help assist in process improvements. Follow procedures and Component Maintenance Manual's (CMM). May act as department representative in customer audits/visits. Adhere to operational procedures and ensure tooling is in calibration before use. Maintain clean and safe work area. Adhere to all safety rules and regulations, 5S. Previous experience in the aerospace industry would be a distinct advantage for this role but not essential, you would you have a strong engineering background with experience of using various hand and power tools and inspection equipment. Qualifications: 2 years' experience in detail manufacturing - assembling complex components Hours: 37 hour week - working core day shift. Overtime is paid is x1.5
May 08, 2024
Seasonal
Assembly Technician Aerospace Havant Up to £15.40 per hour On Going Contract Our client based in the Havant area is looking to recruit Assembly Technicians for the aerospace industry. Working at their site in Havant the role would involve, disassembling faulty aerospace components, building them together into complex parts and using various methods to test and inspect. You would be working in the MRO team (Maintenance, Repair and Overhaul). The successful candidate will: Assemble, teardown and rebuild hydraulic LRU's (Line replacement units) returning from the field for repair or overhaul. Reports to the Production Team Leader/ Area Manager in MRO. Teardown, re-assemble LRU's Ensure activities are performed correctly and proper tooling and documentation is used. Perform visual inspection, identify any defective items and handle according to established procedures. Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, Arbor press, vices, soldering iron, depth micrometres, callipers, lockwire pliers, dial indicators, pressure gauges, flow meters, multi-meters, test boxes or specialized test equipment as needed. Proficient interpreting and using drawings. Material preparation including lapping of surfaces with proper tooling techniques and compounds. Perform cross training when required. Proactively identify and help assist in process improvements. Follow procedures and Component Maintenance Manual's (CMM). May act as department representative in customer audits/visits. Adhere to operational procedures and ensure tooling is in calibration before use. Maintain clean and safe work area. Adhere to all safety rules and regulations, 5S. Previous experience in the aerospace industry would be a distinct advantage for this role but not essential, you would you have a strong engineering background with experience of using various hand and power tools and inspection equipment. Qualifications: 2 years' experience in detail manufacturing - assembling complex components Hours: 37 hour week - working core day shift. Overtime is paid is x1.5
Our client is a leading F1 Motorsport team. Due to increased demands, they are looking for an experienced Composite Pre Preg-Trimmer. Requirements: Previous experience in Pre Preg Trimming/Fitting Must have experience with either the motorsport or aerospace industry Attention to detail essential click apply for full job details
May 08, 2024
Contractor
Our client is a leading F1 Motorsport team. Due to increased demands, they are looking for an experienced Composite Pre Preg-Trimmer. Requirements: Previous experience in Pre Preg Trimming/Fitting Must have experience with either the motorsport or aerospace industry Attention to detail essential click apply for full job details
Role: Machine Operator Location: Knowsley Salary: £34,000 Shift Pattern: Double Days Permanent Position This is an excellent opportunity for a Machine Operator to join an established engineering business in the Knowsley. This market leading engineering company operates an international network of facilities serving a wide range of industries including aerospace, defence, automotive and oil & gas. Key Responsibilities: Production operation of surface grinder, flat lapping machine, autoclave and finishing bench Operate semi-automatic equipment using predetermined programmes Quality check parts before releasing to customers. Stripping of coating from Jigs / fixtures Maintain required control of jigging / fixtures to ensure readily available and placed in correct designated area Goods Inwards inspection of received products Ensure machines / Spray Booths are operated according to site and manufacturers recommendations Qualifications & Experiences: Engineering background, proficient in interpreting drawings. Demonstrates strong teamwork abilities. Possesses effective communication skills. Salary / package details: Pension - match contribution from 4% - 10% Life Assurance 2x annual salary rising to 4 x if join Company pension. Free parking on all sites Free refreshments provided. An entitlement to full pay whilst off sick for a limited number of days (in addition to your statutory sick pay entitlement) 25 days holiday plus national holiday. For further details, please contact Nick Sollis (phone number removed) or (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. For details of other opportunities available within your chosen field please visit our website (url removed) Omega Resource Group is acting as an Employment Agency in relation to this vacancy. Omega is an employment business specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
May 08, 2024
Full time
Role: Machine Operator Location: Knowsley Salary: £34,000 Shift Pattern: Double Days Permanent Position This is an excellent opportunity for a Machine Operator to join an established engineering business in the Knowsley. This market leading engineering company operates an international network of facilities serving a wide range of industries including aerospace, defence, automotive and oil & gas. Key Responsibilities: Production operation of surface grinder, flat lapping machine, autoclave and finishing bench Operate semi-automatic equipment using predetermined programmes Quality check parts before releasing to customers. Stripping of coating from Jigs / fixtures Maintain required control of jigging / fixtures to ensure readily available and placed in correct designated area Goods Inwards inspection of received products Ensure machines / Spray Booths are operated according to site and manufacturers recommendations Qualifications & Experiences: Engineering background, proficient in interpreting drawings. Demonstrates strong teamwork abilities. Possesses effective communication skills. Salary / package details: Pension - match contribution from 4% - 10% Life Assurance 2x annual salary rising to 4 x if join Company pension. Free parking on all sites Free refreshments provided. An entitlement to full pay whilst off sick for a limited number of days (in addition to your statutory sick pay entitlement) 25 days holiday plus national holiday. For further details, please contact Nick Sollis (phone number removed) or (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. For details of other opportunities available within your chosen field please visit our website (url removed) Omega Resource Group is acting as an Employment Agency in relation to this vacancy. Omega is an employment business specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Job Tile: Maintenance Technician Location: Wolverhampton Salary: Competitive Contract Type: Permanent Role Overview My clients is a leading engineering and manufacturing firm based in Wolverhampton, specialising in the aerospace/ defence sector. They are currently seeking a Maintenance Technician with experience and knowledge to be able to diagnosis and repair CNC equipment within machine shop. Key Responsibilities Planned and reactive maintenance of a range of manufacturing equipment to reduce downtime. Repairing or replacing faults components, parts, or systems Assessing CNC machinery and equipment to ensure every machine is at optimal performance. Working with variety of types of machinery and equipment Communication with other team members or departments to construct maintenance activities. Qualifications & Requirements Proven experience and expertise in both electrical and mechanical systems. Apprentice Trained in relevant engineering subject 18th Edition Electrical qualifications. Proficiency in interpreting drawings or planning details to devise effective repair solutions. Ability to troubleshoot and resolve mechanical and electrical issues efficiently. Previous work experience in an engineering or manufacturing environment. Benefits 6% contributory pension 25 days annual leave Flexible Benefits Package Life Assurance A career rooted in a culture of trust and innovation spanning many years. For more information on this role, please contact Freddie James on (phone number removed) or send a copy of your CV to (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Electronics, Defence, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Staff, Senior Managers, service engineering, maintenance technician, electrical technician, building mechanic, maintenance engineer, structural assembler and steamfitter. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment business specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
May 08, 2024
Full time
Job Tile: Maintenance Technician Location: Wolverhampton Salary: Competitive Contract Type: Permanent Role Overview My clients is a leading engineering and manufacturing firm based in Wolverhampton, specialising in the aerospace/ defence sector. They are currently seeking a Maintenance Technician with experience and knowledge to be able to diagnosis and repair CNC equipment within machine shop. Key Responsibilities Planned and reactive maintenance of a range of manufacturing equipment to reduce downtime. Repairing or replacing faults components, parts, or systems Assessing CNC machinery and equipment to ensure every machine is at optimal performance. Working with variety of types of machinery and equipment Communication with other team members or departments to construct maintenance activities. Qualifications & Requirements Proven experience and expertise in both electrical and mechanical systems. Apprentice Trained in relevant engineering subject 18th Edition Electrical qualifications. Proficiency in interpreting drawings or planning details to devise effective repair solutions. Ability to troubleshoot and resolve mechanical and electrical issues efficiently. Previous work experience in an engineering or manufacturing environment. Benefits 6% contributory pension 25 days annual leave Flexible Benefits Package Life Assurance A career rooted in a culture of trust and innovation spanning many years. For more information on this role, please contact Freddie James on (phone number removed) or send a copy of your CV to (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Electronics, Defence, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Staff, Senior Managers, service engineering, maintenance technician, electrical technician, building mechanic, maintenance engineer, structural assembler and steamfitter. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment business specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
AMETEK, Inc . is a leading global manufacturer of electronic instruments and electromechanical devices with annual sales of approximately $5 billion. AMETEK is well positioned in highly competitive market segments, each with compelling growth characteristics. We expect continued business growth through the execution of our four key strategies: Operational Excellence, Strategic Acquisitions, New Products, and Global & Market Expansion. Supporting those strategies are 17,000 associates employed across 30 countries. AEM Limited has been Europe's leading independent overhaul and repair facility for more than 60 years. The company has a solid reputation in the aerospace industry for providing a broad range of services to international and regional airlines, helicopter operators and airframe manufacturers. Conducting business from three sites in the United Kingdom, AEM offers specialist services for in excess of 5,000 components over a variety of aircraft systems with capabilities covering aircraft windings, electrical power, hydraulic components, landing gear and safety equipment. Responsibilities Chrome, Nickel, Cadmium, Silver, Tin, Copper, Phosphate, Heat Treatment, Non Destructive Testing (Nital Etch) and other associated processes, are included within the Metal Finishing section. Undertaking a breadth of tasks including Electro plating (Cadmium, Nickel, Chrome, Silver, Tin, Phosphate, Aqueous cleaning and degreasing, masking to an extensive variety of components from a wide selection of different aircraft platforms. Support the Metal Finishing Supervisor and Team Leader with delivering the day to day needs of the Metal Finishing operations. To assist, as required with the monitoring of stock levels for chemicals and consumables. To assist, as required with certain elements of machine maintenance (peventative and scheduled). Support with the training and development of the Metal Finishing team. Adhere to the AEM Behaviours for the Metal Finishing Team, supporting the Metal Finishing Supervisor and Team Leader. Support with the implementation of initiatives to improve manpower utilisation and process improvement within the Metal Finishing operations. Ensure quality requirements are always met. Promote a culture of Continuous Improvement; maintain and improve housekeeping in all areas driving continuous improvement initiatives. Support with effective communication through Metal Finishing and MPBU Operations. Support with continually improving safety by addressing both physical safety issues and safety attitudes within the Metal Finishing Section. Support with the maintenance of plant and equipment. Support the Metal Finishing team delivering results to meet the strategic objectives of MPBU and AEM. Adhere to industry standard QA rules and regulations. Experience, Qualifications and Competencies Minimum of 3 years' experience in engineering/metal finishing, (essential) Computer literate - competent in Microsoft Office.
May 08, 2024
Full time
AMETEK, Inc . is a leading global manufacturer of electronic instruments and electromechanical devices with annual sales of approximately $5 billion. AMETEK is well positioned in highly competitive market segments, each with compelling growth characteristics. We expect continued business growth through the execution of our four key strategies: Operational Excellence, Strategic Acquisitions, New Products, and Global & Market Expansion. Supporting those strategies are 17,000 associates employed across 30 countries. AEM Limited has been Europe's leading independent overhaul and repair facility for more than 60 years. The company has a solid reputation in the aerospace industry for providing a broad range of services to international and regional airlines, helicopter operators and airframe manufacturers. Conducting business from three sites in the United Kingdom, AEM offers specialist services for in excess of 5,000 components over a variety of aircraft systems with capabilities covering aircraft windings, electrical power, hydraulic components, landing gear and safety equipment. Responsibilities Chrome, Nickel, Cadmium, Silver, Tin, Copper, Phosphate, Heat Treatment, Non Destructive Testing (Nital Etch) and other associated processes, are included within the Metal Finishing section. Undertaking a breadth of tasks including Electro plating (Cadmium, Nickel, Chrome, Silver, Tin, Phosphate, Aqueous cleaning and degreasing, masking to an extensive variety of components from a wide selection of different aircraft platforms. Support the Metal Finishing Supervisor and Team Leader with delivering the day to day needs of the Metal Finishing operations. To assist, as required with the monitoring of stock levels for chemicals and consumables. To assist, as required with certain elements of machine maintenance (peventative and scheduled). Support with the training and development of the Metal Finishing team. Adhere to the AEM Behaviours for the Metal Finishing Team, supporting the Metal Finishing Supervisor and Team Leader. Support with the implementation of initiatives to improve manpower utilisation and process improvement within the Metal Finishing operations. Ensure quality requirements are always met. Promote a culture of Continuous Improvement; maintain and improve housekeeping in all areas driving continuous improvement initiatives. Support with effective communication through Metal Finishing and MPBU Operations. Support with continually improving safety by addressing both physical safety issues and safety attitudes within the Metal Finishing Section. Support with the maintenance of plant and equipment. Support the Metal Finishing team delivering results to meet the strategic objectives of MPBU and AEM. Adhere to industry standard QA rules and regulations. Experience, Qualifications and Competencies Minimum of 3 years' experience in engineering/metal finishing, (essential) Computer literate - competent in Microsoft Office.
Hydraulics Field Service Engineer Gloucester £30,000 to £40,000 per year DOE - Vehicle, Door-to-Door, Overtime x1.5, Development Are you a Hydraulics Engineer who enjoys the road, wants more of a technical challenge and to work for a reputable UK leader? This opportunity is for someone with good hydraulic, pneumatic and electrical systems experience to assess, service, maintain and install industrial equipment and components. You will join as they look to double their workforce due to growth and demand.The company is a recognised UK leader in innovating/engineering complex products and design solutions for various industry sectors. They service the UK with highly trained engineers adhering to industry standards, and specifications to meet client requirements in the most efficient way possible.The role will require you to travel as required from home (D2D) attending scheduled service and install activities around your local area. Conduct regular inspections accessing conditions, performance and efficiency of systems. Identify, Repair, and replace faulty components and where possible implement improvements to enhance the system's overall performance.This is a great opportunity to join a bespoke UK fully integrated systems provider enhancing business performance in the power generation sectors.The Role: Hydraulics Field Service Engineer Maintenance, repair, troubleshoot, optimise and upgrade Field-based site work and attending emergency response, meeting H&S and continuous monitoringCandidate Requirements: Multi-skilled Electrical/Mechanical Hydraulics, Pneumatics, Fluid Power, Cylinders, Compressed air Service Technician, Service Engineer, MaintenanceConsultant: Rak Khetani (UK right only, please call to promote your application - Ref )Revorec Recruitment Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior-level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.Hydraulics Engineer Field Service Engineer Installations Engineer Service Engineer Service Technician Mechanical Engineer Technician Maintenance Engineer Commissioning Engineer Mechanical Hose Fitter Pipes Values Repair Improve Pneumatic Hydraulic Systems Fluid Power Systems Compressed Air Service Calls Emergency response RAMS Plant Fitter Multi-skilled Electrical Manufacturing Factory Maintenance Service Repair Field Service Breakdown Fitter Electrical PPM Pipe Fitting Heavy Industry Plant Maintenance Industrial Automation Engineer Aerospace Food Drink Level 2 Level 3 BTEC BEng NVQ HNC HND Problem-Solving Troubleshooting Gloucester Cheltenham Worcester Tewkesbury Cirencester Newent Cinderford Lydney Dursley Ledbury.
May 08, 2024
Full time
Hydraulics Field Service Engineer Gloucester £30,000 to £40,000 per year DOE - Vehicle, Door-to-Door, Overtime x1.5, Development Are you a Hydraulics Engineer who enjoys the road, wants more of a technical challenge and to work for a reputable UK leader? This opportunity is for someone with good hydraulic, pneumatic and electrical systems experience to assess, service, maintain and install industrial equipment and components. You will join as they look to double their workforce due to growth and demand.The company is a recognised UK leader in innovating/engineering complex products and design solutions for various industry sectors. They service the UK with highly trained engineers adhering to industry standards, and specifications to meet client requirements in the most efficient way possible.The role will require you to travel as required from home (D2D) attending scheduled service and install activities around your local area. Conduct regular inspections accessing conditions, performance and efficiency of systems. Identify, Repair, and replace faulty components and where possible implement improvements to enhance the system's overall performance.This is a great opportunity to join a bespoke UK fully integrated systems provider enhancing business performance in the power generation sectors.The Role: Hydraulics Field Service Engineer Maintenance, repair, troubleshoot, optimise and upgrade Field-based site work and attending emergency response, meeting H&S and continuous monitoringCandidate Requirements: Multi-skilled Electrical/Mechanical Hydraulics, Pneumatics, Fluid Power, Cylinders, Compressed air Service Technician, Service Engineer, MaintenanceConsultant: Rak Khetani (UK right only, please call to promote your application - Ref )Revorec Recruitment Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior-level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.Hydraulics Engineer Field Service Engineer Installations Engineer Service Engineer Service Technician Mechanical Engineer Technician Maintenance Engineer Commissioning Engineer Mechanical Hose Fitter Pipes Values Repair Improve Pneumatic Hydraulic Systems Fluid Power Systems Compressed Air Service Calls Emergency response RAMS Plant Fitter Multi-skilled Electrical Manufacturing Factory Maintenance Service Repair Field Service Breakdown Fitter Electrical PPM Pipe Fitting Heavy Industry Plant Maintenance Industrial Automation Engineer Aerospace Food Drink Level 2 Level 3 BTEC BEng NVQ HNC HND Problem-Solving Troubleshooting Gloucester Cheltenham Worcester Tewkesbury Cirencester Newent Cinderford Lydney Dursley Ledbury.
Elevation Recruitment Group are currently recruiting a Metallurgical Laboratory Technician for a brilliant opportunity within a specialist aerospace manufacturing business in the Sheffield. This is a fantastic opportunity for a Metallurgical Laboratory Technician to work in a business that is committed to producing world class quality products. The successful candidate will work within an established and experienced technical team and play a pivotal role in the metallurgical processes on site. Salary is £28,500 basic with realistic earnings of £32k with shift allowance. The Metallurgical Laboratory Technician's will be expected to perform metallurgical testing in support of aerospace manufacturing processes on materials such as stainless steels, titanium and nickel alloys. Testing will include metallography, hardness testing and elemental analysis. Support may also be required on geometric inspection of completed parts. I am keen to speak to metallurgists with the following: - A Metallurgy or Metal Science Degree - Ability to carry out metallographic, hardness and hydrogen testing - Experience carrying out final inspections using tools such as calipers and verniers. - Experience working in aerospace manufacturing. Are you passionate about driving change in a business where Metallurgy is the key to the business? This is a great opportunity for a Metallurgist to join a business as it enters an exciting period. If this role is of interest, please reply to discuss further.
Feb 01, 2024
Full time
Elevation Recruitment Group are currently recruiting a Metallurgical Laboratory Technician for a brilliant opportunity within a specialist aerospace manufacturing business in the Sheffield. This is a fantastic opportunity for a Metallurgical Laboratory Technician to work in a business that is committed to producing world class quality products. The successful candidate will work within an established and experienced technical team and play a pivotal role in the metallurgical processes on site. Salary is £28,500 basic with realistic earnings of £32k with shift allowance. The Metallurgical Laboratory Technician's will be expected to perform metallurgical testing in support of aerospace manufacturing processes on materials such as stainless steels, titanium and nickel alloys. Testing will include metallography, hardness testing and elemental analysis. Support may also be required on geometric inspection of completed parts. I am keen to speak to metallurgists with the following: - A Metallurgy or Metal Science Degree - Ability to carry out metallographic, hardness and hydrogen testing - Experience carrying out final inspections using tools such as calipers and verniers. - Experience working in aerospace manufacturing. Are you passionate about driving change in a business where Metallurgy is the key to the business? This is a great opportunity for a Metallurgist to join a business as it enters an exciting period. If this role is of interest, please reply to discuss further.
CALLING SHEET METAL WORKERS. Come and work for a world leading airline based out of Glasgow Airport as a structures/sheet metal worker and contribute to the maintenance and repair operations.Responsibilities:- Fabricate and repair aircraft structural components using sheet metal- Interpret engineering drawings and blueprints to perform precise work- Conduct inspections and assessments of aircraft structures- Collaborate with a team of technicians to ensure timely completion of tasks- Adhere to safety protocols and maintain a clean and organized workspace- Follow maintenance manuals and guidelines for aircraft repair and modificationRequirements:- HFs, EWIS and FTS certificates required but can assist in gaining them. - Proven experience as a Sheet Metal Worker, preferably in aviation or aerospace- Ability to work effectively in a team and independently- Proficient in reading and interpreting technical drawings and specifications- Understanding of aviation regulations and safety standards- Strong attention to detail and precision in workmanshipIf this sounds like something that might be of interest or you know someone that might be suitable for please forward any CVs to and look forward to hearing from you.
Feb 01, 2024
Full time
CALLING SHEET METAL WORKERS. Come and work for a world leading airline based out of Glasgow Airport as a structures/sheet metal worker and contribute to the maintenance and repair operations.Responsibilities:- Fabricate and repair aircraft structural components using sheet metal- Interpret engineering drawings and blueprints to perform precise work- Conduct inspections and assessments of aircraft structures- Collaborate with a team of technicians to ensure timely completion of tasks- Adhere to safety protocols and maintain a clean and organized workspace- Follow maintenance manuals and guidelines for aircraft repair and modificationRequirements:- HFs, EWIS and FTS certificates required but can assist in gaining them. - Proven experience as a Sheet Metal Worker, preferably in aviation or aerospace- Ability to work effectively in a team and independently- Proficient in reading and interpreting technical drawings and specifications- Understanding of aviation regulations and safety standards- Strong attention to detail and precision in workmanshipIf this sounds like something that might be of interest or you know someone that might be suitable for please forward any CVs to and look forward to hearing from you.
Would you like to join a global aviation & aerospace organisation? Do you want to play a key part in the design and production of exciting new products? Due to continued investment, this leading-edge manufacturing business is currently in the midst of a huge recruitment drive and is looking for a Supplier Quality Technician to join their existing team in Gloucester on an initial 6 months contract click apply for full job details
Dec 20, 2022
Contractor
Would you like to join a global aviation & aerospace organisation? Do you want to play a key part in the design and production of exciting new products? Due to continued investment, this leading-edge manufacturing business is currently in the midst of a huge recruitment drive and is looking for a Supplier Quality Technician to join their existing team in Gloucester on an initial 6 months contract click apply for full job details
Job description The SDE will guide suppliers through the Safran industrial validation processes, leading or supporting all phases as required. They will ensure efficient project management of all product transfers from Safran HE UK to the supply chain and will ensure compliance to Safran standards for industrialization. Where suppliers experience challenges in meeting their QCD targets, the SDE will support problem solving and continuous improvement activity, both remotely and at suppliers' facilities. Responsibilities shall include cross-functional project management to qualify new components, supporting issues with current production, developing new suppliers to reduce cost, increase capacity, improve quality, and auditing suppliers to ensure process conformance. Manage the customer specific requirements and offer technical support. Work on multiple phases or sub-tasks of projects or entire projects of moderate complexity, with results impacting on project completion. Tasks: • Support supplier selection through robust qualification processes • Assess new and existing supplier capabilities to meet QCD targets and ensure their ability to comply with requirements for PPAP, APQP, ISO 9001, ISO 14001 and other applicable standards • Drive improvements utilizing Lean methodologies, ensuring supplier compliance, whilst driving systematic problem solving and process improvement plans to deliver value • Track the supplier's key performance indicators • Develop positive relationships and work closely with Procurement to manage, implement and track supplier/engineering, design changes, capacity studies New Product Introductions and transfers • Deliver results as measured by key metrics, such as supplier OTD, and corrective & preventative action closure • Guide and Coach the Quality, Manufacturing, Engineering and Procurement organizations to drive cost effective improvements to Quality and Manufacturing processes, minimizing waste, introduce new products and improve product design • Provide leadership during investigations of major problems and or special projects focusing on developing working relationships with suppliers and the supply chain about product development and procurement of parts • Responsible for leading the solution for supplier component concerns, driving Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), customer interaction, supplier interaction, • Assist with new product launch by working with suppliers to ensure that key milestones are achieved • Ensure supplier process capability is effective • Contribute to continuous improvement activities • Write reports and present progress at project meetings and to clients • Undertake personal continuous training and development • Perform root cause analysis and resolve problems • Develop and maintain strong relationships to ensure optimal performance • Communicate efficiently throughout the procurement process • Comply with the Health, Sa Job requirements Skills: • Diplomatic approach to relationships • Experience in Sourcing, Engineering, Quality, Manufacturing and project management • Experience in vendor qualification • Knowledge of quality and business systems • Commercial and financial acumen • Strong knowledge of Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA) • Strong experience of cross functional working • Report and Procedure writing, with excellent presentation skills • Understanding and interpretation of engineering drawings • Understanding manufacturing processes • Planning and prioritizing activities • Ability to present data effectively • Numerically astute with strong problem-solving skills and expertise to develop and execute objectives for self and others and the ability to effect short-term and some long-term business goals Qualities: • Relevant manufacturing/engineering degree preferred; ONC, A Levels, City & Guilds Level 3, BTec National Diploma Level 3, IVQ Technician Diploma or equivalent NVQ level 3 qualification • Substantial experience in a precision manufacturing environment, preferably aerospace or automotive • Experience in supplier development • Experience of dealing with customers and suppliers • Assertive, optimistic, resilient and welcomes change • Engages interest and participation of others and has a collaborative approach to working together • Proactively contributes to the team • Is self-aware and has ability to work on own initiative • Shows moral courage, openness and honesty in all dealings • Ability to work in a diverse and dynamic environment • Good communication and interpersonal skills • Strong negotiation and influencing skills Specificity of the job Some travel required, estimated to be 2-3 times per month maximum Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defence and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 76,800 employees and sales of 15,3 billion euros in 2021 and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran undertakes research and development programs to maintain the environmental priorities of its R&T and innovation roadmap. Safran was ranked as the world's third best employer in its sector by Forbes magazine in 2021. Safran Helicopter Engines is the world's leading manufacturer of helicopter engines, with more than 75,000 produced since being founded. It offers the widest range of helicopter turboshafts in the world and has more than 2,500 customers in 155 countries.
Dec 15, 2022
Full time
Job description The SDE will guide suppliers through the Safran industrial validation processes, leading or supporting all phases as required. They will ensure efficient project management of all product transfers from Safran HE UK to the supply chain and will ensure compliance to Safran standards for industrialization. Where suppliers experience challenges in meeting their QCD targets, the SDE will support problem solving and continuous improvement activity, both remotely and at suppliers' facilities. Responsibilities shall include cross-functional project management to qualify new components, supporting issues with current production, developing new suppliers to reduce cost, increase capacity, improve quality, and auditing suppliers to ensure process conformance. Manage the customer specific requirements and offer technical support. Work on multiple phases or sub-tasks of projects or entire projects of moderate complexity, with results impacting on project completion. Tasks: • Support supplier selection through robust qualification processes • Assess new and existing supplier capabilities to meet QCD targets and ensure their ability to comply with requirements for PPAP, APQP, ISO 9001, ISO 14001 and other applicable standards • Drive improvements utilizing Lean methodologies, ensuring supplier compliance, whilst driving systematic problem solving and process improvement plans to deliver value • Track the supplier's key performance indicators • Develop positive relationships and work closely with Procurement to manage, implement and track supplier/engineering, design changes, capacity studies New Product Introductions and transfers • Deliver results as measured by key metrics, such as supplier OTD, and corrective & preventative action closure • Guide and Coach the Quality, Manufacturing, Engineering and Procurement organizations to drive cost effective improvements to Quality and Manufacturing processes, minimizing waste, introduce new products and improve product design • Provide leadership during investigations of major problems and or special projects focusing on developing working relationships with suppliers and the supply chain about product development and procurement of parts • Responsible for leading the solution for supplier component concerns, driving Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), customer interaction, supplier interaction, • Assist with new product launch by working with suppliers to ensure that key milestones are achieved • Ensure supplier process capability is effective • Contribute to continuous improvement activities • Write reports and present progress at project meetings and to clients • Undertake personal continuous training and development • Perform root cause analysis and resolve problems • Develop and maintain strong relationships to ensure optimal performance • Communicate efficiently throughout the procurement process • Comply with the Health, Sa Job requirements Skills: • Diplomatic approach to relationships • Experience in Sourcing, Engineering, Quality, Manufacturing and project management • Experience in vendor qualification • Knowledge of quality and business systems • Commercial and financial acumen • Strong knowledge of Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA) • Strong experience of cross functional working • Report and Procedure writing, with excellent presentation skills • Understanding and interpretation of engineering drawings • Understanding manufacturing processes • Planning and prioritizing activities • Ability to present data effectively • Numerically astute with strong problem-solving skills and expertise to develop and execute objectives for self and others and the ability to effect short-term and some long-term business goals Qualities: • Relevant manufacturing/engineering degree preferred; ONC, A Levels, City & Guilds Level 3, BTec National Diploma Level 3, IVQ Technician Diploma or equivalent NVQ level 3 qualification • Substantial experience in a precision manufacturing environment, preferably aerospace or automotive • Experience in supplier development • Experience of dealing with customers and suppliers • Assertive, optimistic, resilient and welcomes change • Engages interest and participation of others and has a collaborative approach to working together • Proactively contributes to the team • Is self-aware and has ability to work on own initiative • Shows moral courage, openness and honesty in all dealings • Ability to work in a diverse and dynamic environment • Good communication and interpersonal skills • Strong negotiation and influencing skills Specificity of the job Some travel required, estimated to be 2-3 times per month maximum Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defence and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 76,800 employees and sales of 15,3 billion euros in 2021 and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran undertakes research and development programs to maintain the environmental priorities of its R&T and innovation roadmap. Safran was ranked as the world's third best employer in its sector by Forbes magazine in 2021. Safran Helicopter Engines is the world's leading manufacturer of helicopter engines, with more than 75,000 produced since being founded. It offers the widest range of helicopter turboshafts in the world and has more than 2,500 customers in 155 countries.
Job title: Mechanical Engineer About Us: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Under the direction of the project manager or the mechanical team leader, the Mechanical Engineer provides innovative, cost effective and reliable solutions to the design, development or sustaining of new or improved products meeting the business needs. He or she develops and maintains design layouts, models, drawings and other documentation needed to define, produce and sustain the products, taking into consideration fabrication methods, and in compliance with applicable internal and external standards. He or she assists the project manager in planning, conducting and evaluating approaches to meet the project objectives in a timely fashion. Essential Responsibilities and Duties: Designs, develops and maintains the mechanical portion of products, meeting product and project requirements, in close collaboration with the other disciplines and functions. Assists in identifying product requirements and risks and in defining risk control plans. Develops and maintains mechanical layouts which may include 3D models and drawings using the CAD system, develops and maintains the bill of materials. Participates in the verification of the design with analytical or finite element models or physical tests, and in the documentation of the verification test results. Designs and builds prototypes and associated fabrication and test tooling. Creates and maintains product file documentation, including fabrication and test procedures. Participates in the definition of test procedures, in the performance of the tests and documentation of test results. Publishes accurate status reports, provides timely corrective actions on encountered defects or issues. Continually evaluates engineering approaches, risks, and iterates the development plans. Participates in technical reviews of requirements, risks, designs, product files and other artifacts. Prepares technical user documentation. Provides training and support to Field users and clients. Present the new or improved product to technical and management audiences. May assign, direct and review the work of technicians, mentor junior engineers. Shares his or her expertise internally and expands his informal network throughout the organization: field, research, engineering, manufacturing, other domains and clients. Contributes to the capture of the company's experience in design books and other standards, procedures, training packages. Authors or co-authors technical reports, invention disclosures, papers and presentations. Keeps abreast of novel technologies, including manufacturing processes and techniques. Continually improves his or her skills to develop innovative and cost-effective products. Maintains familiarity with the company's technology, organization and business. Complies with applicable company policies, standards and procedures, including those related to Personnel, Quality, and Health, Safety and Environment. Competencies: • Mechanical system design • CAD, drafting standards, tolerancing • Electromechanical design • Material sciences, material selection • Structural analytical and finite element analysis • Hydraulics computations • Manufacturing technologies • Design for X methodologies (manufacturability, maintainability, reliability, compliance, etc.) Qualification & Experience: BS or MS: Mechanical, Aerospace, Subsea Engineering Minimum GPA: 3.0 / 4.0 3-5 years industry experience Career Advancement: SLB Eureka Technical Career (SETC) provides proven technical contributors with a career path that offers them recognition, reward, and influence that parallels an equivalent management progression. We are leaders in Technology Domain Knowledge - Our Eureka Community of practice has over 28,500 members, in 30 communities, with 123 Special Interest Groups (SIGs). We've published over 10,000 publications in the past decade. The early stage of SETC known as "SETC Associate", is a new addition to the SETC Framework in the Technology Organization. BlueFlex (if eligible): We are open to flexible, hybrid working with a combination of on-site & home working days. What we can offer you: Competitive base salary with bonus, private healthcare for employee & family, subsidised dental care, Health & Wellbeing programs such as the Employee Mental health support, health & wellness coaching, part employer and employee funded pension contribution, Income protection scheme, life insurance. Other benefits are also available through the SLB flexible benefits program. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Dec 15, 2022
Full time
Job title: Mechanical Engineer About Us: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Under the direction of the project manager or the mechanical team leader, the Mechanical Engineer provides innovative, cost effective and reliable solutions to the design, development or sustaining of new or improved products meeting the business needs. He or she develops and maintains design layouts, models, drawings and other documentation needed to define, produce and sustain the products, taking into consideration fabrication methods, and in compliance with applicable internal and external standards. He or she assists the project manager in planning, conducting and evaluating approaches to meet the project objectives in a timely fashion. Essential Responsibilities and Duties: Designs, develops and maintains the mechanical portion of products, meeting product and project requirements, in close collaboration with the other disciplines and functions. Assists in identifying product requirements and risks and in defining risk control plans. Develops and maintains mechanical layouts which may include 3D models and drawings using the CAD system, develops and maintains the bill of materials. Participates in the verification of the design with analytical or finite element models or physical tests, and in the documentation of the verification test results. Designs and builds prototypes and associated fabrication and test tooling. Creates and maintains product file documentation, including fabrication and test procedures. Participates in the definition of test procedures, in the performance of the tests and documentation of test results. Publishes accurate status reports, provides timely corrective actions on encountered defects or issues. Continually evaluates engineering approaches, risks, and iterates the development plans. Participates in technical reviews of requirements, risks, designs, product files and other artifacts. Prepares technical user documentation. Provides training and support to Field users and clients. Present the new or improved product to technical and management audiences. May assign, direct and review the work of technicians, mentor junior engineers. Shares his or her expertise internally and expands his informal network throughout the organization: field, research, engineering, manufacturing, other domains and clients. Contributes to the capture of the company's experience in design books and other standards, procedures, training packages. Authors or co-authors technical reports, invention disclosures, papers and presentations. Keeps abreast of novel technologies, including manufacturing processes and techniques. Continually improves his or her skills to develop innovative and cost-effective products. Maintains familiarity with the company's technology, organization and business. Complies with applicable company policies, standards and procedures, including those related to Personnel, Quality, and Health, Safety and Environment. Competencies: • Mechanical system design • CAD, drafting standards, tolerancing • Electromechanical design • Material sciences, material selection • Structural analytical and finite element analysis • Hydraulics computations • Manufacturing technologies • Design for X methodologies (manufacturability, maintainability, reliability, compliance, etc.) Qualification & Experience: BS or MS: Mechanical, Aerospace, Subsea Engineering Minimum GPA: 3.0 / 4.0 3-5 years industry experience Career Advancement: SLB Eureka Technical Career (SETC) provides proven technical contributors with a career path that offers them recognition, reward, and influence that parallels an equivalent management progression. We are leaders in Technology Domain Knowledge - Our Eureka Community of practice has over 28,500 members, in 30 communities, with 123 Special Interest Groups (SIGs). We've published over 10,000 publications in the past decade. The early stage of SETC known as "SETC Associate", is a new addition to the SETC Framework in the Technology Organization. BlueFlex (if eligible): We are open to flexible, hybrid working with a combination of on-site & home working days. What we can offer you: Competitive base salary with bonus, private healthcare for employee & family, subsidised dental care, Health & Wellbeing programs such as the Employee Mental health support, health & wellness coaching, part employer and employee funded pension contribution, Income protection scheme, life insurance. Other benefits are also available through the SLB flexible benefits program. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Do you have experience with heavy mechanical engineering? Looking for a role with longevity and with potential progression available? After a Temp to Perm position? Job title: Maintenance Assistant Job location: Central Rivers, Burton-On-Trent Hourly pay rate: £17.72 PAYE/ £22.51 UmbrellaShifts: Days, Nights and Weekends (Must be Flexible) - 4 on 4 off Hours per week: 40 hours average Duration: ContractStart date: ASAPIndustries considered: Automotive, Rolling Stock, Aerospace. Disciplines considered: Mechanically biased, HGV Technician, Ex Forces Mechanical Technician - Tanks/Excavator, Heavy Plant Technician - JCB/HGV/TRAINS Company Summary: A Global market leader in Rolling Stock manufacturing, maintenance and servicing with a proven track record for sustainability and growth. Position Summary:Working under their own initiative, to carry out routine maintenance, repair and basic fault finding work on the DEMU Class 220/221 Fleets. Job Profile - Safety Critical / Safety Related: Routine rail vehicle maintenance as per laid down Vehicle Maintenance Instruction (VMI) Assist Technicians as required. Where trained and competent Tyre Turn 220/221 vehicles on the Wheel Lathe in accordance with laid down specifications. Operation of powered plant, lifting and mechanical handling equipment. Where trained and competent move Class 220/221 vehicles around the site. Operation of Battery Charging/Shore Supply equipment. Maintenance of plant. Drive road vehicles as required. Compliance with all laid down H&S legislation and depot procedures to ensure a safe accident free environment. Responsible for keeping the work area clean and tidy and to the highest standard at all times. Required to continually look at opportunities to adopt and develop continuous improvement techniquesJob RequirementsHeavy maintenance/Overhaul on Cross Country 220/221 and Virgin West Coast 221 such as: Bogie exchange Caliper change Axle changes Traction motors Carden shafts Power pack drop (Engine) Compressors Air dryers Fuel tanks Excitations PIMS Permanent and Auto couplers TPCU Cab changes Full door changes Seats Floor renewal Toilet tank exchange (Alongside TBM) Fresh water tanks Mechanical Mods Mod on the Cross Countries completed via technical drawing, followed up with testing Various maintenance visits such as compressor oil changes, air dryer pressure valve, final drive oil sampling and changes and brake pad checks and changes Person Profile/Experience:Knowledge and experience - Of Heavy diesel engines/power packs. Working on operational depot or site environmentsEducation Level NVQ or City & Guilds Level 3 or equivalent is a requirement. =PLEASE NOTE:ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.The above job specification could be subject to change as agreed with our client.
Dec 14, 2022
Full time
Do you have experience with heavy mechanical engineering? Looking for a role with longevity and with potential progression available? After a Temp to Perm position? Job title: Maintenance Assistant Job location: Central Rivers, Burton-On-Trent Hourly pay rate: £17.72 PAYE/ £22.51 UmbrellaShifts: Days, Nights and Weekends (Must be Flexible) - 4 on 4 off Hours per week: 40 hours average Duration: ContractStart date: ASAPIndustries considered: Automotive, Rolling Stock, Aerospace. Disciplines considered: Mechanically biased, HGV Technician, Ex Forces Mechanical Technician - Tanks/Excavator, Heavy Plant Technician - JCB/HGV/TRAINS Company Summary: A Global market leader in Rolling Stock manufacturing, maintenance and servicing with a proven track record for sustainability and growth. Position Summary:Working under their own initiative, to carry out routine maintenance, repair and basic fault finding work on the DEMU Class 220/221 Fleets. Job Profile - Safety Critical / Safety Related: Routine rail vehicle maintenance as per laid down Vehicle Maintenance Instruction (VMI) Assist Technicians as required. Where trained and competent Tyre Turn 220/221 vehicles on the Wheel Lathe in accordance with laid down specifications. Operation of powered plant, lifting and mechanical handling equipment. Where trained and competent move Class 220/221 vehicles around the site. Operation of Battery Charging/Shore Supply equipment. Maintenance of plant. Drive road vehicles as required. Compliance with all laid down H&S legislation and depot procedures to ensure a safe accident free environment. Responsible for keeping the work area clean and tidy and to the highest standard at all times. Required to continually look at opportunities to adopt and develop continuous improvement techniquesJob RequirementsHeavy maintenance/Overhaul on Cross Country 220/221 and Virgin West Coast 221 such as: Bogie exchange Caliper change Axle changes Traction motors Carden shafts Power pack drop (Engine) Compressors Air dryers Fuel tanks Excitations PIMS Permanent and Auto couplers TPCU Cab changes Full door changes Seats Floor renewal Toilet tank exchange (Alongside TBM) Fresh water tanks Mechanical Mods Mod on the Cross Countries completed via technical drawing, followed up with testing Various maintenance visits such as compressor oil changes, air dryer pressure valve, final drive oil sampling and changes and brake pad checks and changes Person Profile/Experience:Knowledge and experience - Of Heavy diesel engines/power packs. Working on operational depot or site environmentsEducation Level NVQ or City & Guilds Level 3 or equivalent is a requirement. =PLEASE NOTE:ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.The above job specification could be subject to change as agreed with our client.
Job Type: Temp to Perm Hours: Full Time, Monday to Friday 8am to 5pm (Overtime Available)Salary: £11.50ph - Overtime £15ph+Location: Crownhill, Milton Keynes MK8 Our client is a market leader within the surface shaping and finishing industry, dealing with a range of industries and customers in many market segments including automotive, aerospace and engineering. Dedicated to delivering this excellent service in precision finishing. How would you like to work within the production of prestigious car and aeroplane parts alongside other vital machinery?Responsibilities:-Surface finishing -Machine operating -Assuring all parts are clean and processed -Dealing with high volume parts for automotive & aerospace machines & VehiclesSuccessful Candidate: -Mechanically minded -Attention to detail -Able to follow direction -Fast learner and looking for a long term opportunity-Engineering background (preferred) -Previous technician experienceBenefits: -Temp to Perm -Free Parking -Overtime Available -Potential to earn an external FLT Licence -Full Training and Development If you are interested in the automotive or aerospace industry, if you like working with your hands and using industrial machinery then this could be the position for you. Please contact Scott at Gi Group Milton Keynes on to discuss in detail, alternatively please email Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited and Grafton Professional Staffing Limited. We are committed to protecting the privacy of all of our candidates and clients. Following some recent changes to data protection laws we have updated our Privacy Policy. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group UK website.
Dec 07, 2022
Full time
Job Type: Temp to Perm Hours: Full Time, Monday to Friday 8am to 5pm (Overtime Available)Salary: £11.50ph - Overtime £15ph+Location: Crownhill, Milton Keynes MK8 Our client is a market leader within the surface shaping and finishing industry, dealing with a range of industries and customers in many market segments including automotive, aerospace and engineering. Dedicated to delivering this excellent service in precision finishing. How would you like to work within the production of prestigious car and aeroplane parts alongside other vital machinery?Responsibilities:-Surface finishing -Machine operating -Assuring all parts are clean and processed -Dealing with high volume parts for automotive & aerospace machines & VehiclesSuccessful Candidate: -Mechanically minded -Attention to detail -Able to follow direction -Fast learner and looking for a long term opportunity-Engineering background (preferred) -Previous technician experienceBenefits: -Temp to Perm -Free Parking -Overtime Available -Potential to earn an external FLT Licence -Full Training and Development If you are interested in the automotive or aerospace industry, if you like working with your hands and using industrial machinery then this could be the position for you. Please contact Scott at Gi Group Milton Keynes on to discuss in detail, alternatively please email Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited and Grafton Professional Staffing Limited. We are committed to protecting the privacy of all of our candidates and clients. Following some recent changes to data protection laws we have updated our Privacy Policy. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group UK website.
Calibration Technician - West London - Permanent - Attractive - Aerospace and Defence A Calibration Technician is required to repair, test, and calibrate aviation ground test equipment, avionics test equipment and general-purpose test equipment. The Calibration Technician will report to the Team Leader and this role is a long term and stable opportunity for the right person. Calibration Technician - Key Responsibilities Test, repair, and calibration of ground test equipment. Test, repair of battery chargers, avionics test equipment and general-purpose test equipment. Complete the fault finding, repair, testing and calibration process. Use specialised and general-purpose test equipment. Complete accurate records and ensure that they are filed in a timely manner. Maintain the required level of quality and cost effectiveness, ensuring accuracy. Adhere to working practices and procedures and comply with health and safety requirements. Undertake cross-training in other technical areas in line with requirements of the business. Understand and utilise the company systems to ensure effective delivery. Ensure compliance with regulatory bodies requirements. Skills Required for the Calibration Technician PC literate - Microsoft word, excel, databases HNC/HND level electronics preferred Good command of spoken and written English Good eyesight with or without glasses or lenses (No Colour Blindness) Good experience in electronic repairs at component level RF experience with ability to repair complex RF circuits and technology Soldering skills both surface mount and through hole components Experienced in the use of electronic test equipment Experience of amplification and mixers. Experience in similar role advantageous Aviation or RF or Military background desirable Previous experience within an Avionics desirable Good working knowledge of aircraft systems would be an advantage Hands on knowledge of calibration and repair. Experience with test equipment including DMM's, frequency counters, oscilloscopes, etc. Security Clearance may be required for this role due to the nature of the Industry If you feel you meet the requirements for the role of the Calibration Technician, then apply directly or contact Peter Heap at Jonathan Lee Recruitment . Either Direct Line or Email suitable MS Word CV's to Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
Dec 06, 2022
Full time
Calibration Technician - West London - Permanent - Attractive - Aerospace and Defence A Calibration Technician is required to repair, test, and calibrate aviation ground test equipment, avionics test equipment and general-purpose test equipment. The Calibration Technician will report to the Team Leader and this role is a long term and stable opportunity for the right person. Calibration Technician - Key Responsibilities Test, repair, and calibration of ground test equipment. Test, repair of battery chargers, avionics test equipment and general-purpose test equipment. Complete the fault finding, repair, testing and calibration process. Use specialised and general-purpose test equipment. Complete accurate records and ensure that they are filed in a timely manner. Maintain the required level of quality and cost effectiveness, ensuring accuracy. Adhere to working practices and procedures and comply with health and safety requirements. Undertake cross-training in other technical areas in line with requirements of the business. Understand and utilise the company systems to ensure effective delivery. Ensure compliance with regulatory bodies requirements. Skills Required for the Calibration Technician PC literate - Microsoft word, excel, databases HNC/HND level electronics preferred Good command of spoken and written English Good eyesight with or without glasses or lenses (No Colour Blindness) Good experience in electronic repairs at component level RF experience with ability to repair complex RF circuits and technology Soldering skills both surface mount and through hole components Experienced in the use of electronic test equipment Experience of amplification and mixers. Experience in similar role advantageous Aviation or RF or Military background desirable Previous experience within an Avionics desirable Good working knowledge of aircraft systems would be an advantage Hands on knowledge of calibration and repair. Experience with test equipment including DMM's, frequency counters, oscilloscopes, etc. Security Clearance may be required for this role due to the nature of the Industry If you feel you meet the requirements for the role of the Calibration Technician, then apply directly or contact Peter Heap at Jonathan Lee Recruitment . Either Direct Line or Email suitable MS Word CV's to Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
Job Profile Provide Manufacturing Engineering support to Operations including working with technicians, Inspectors, team leaders and KPO's as and when needed Support the generation of standard documentation in line with scheduled needs. Produce re-work instructions / deviation plans / discrepancies based on project requirements and identify parts and tooling required to carry them out - (materials, tooling, requirements and methodology) Support quality reviews and Root Cause Analysis using lean tools, including driving and owning PPS's. Support Lessons Learned exercises at key milestones involving all key stakeholders in phase (Operations, process owners, MAIT management, and design) Ensure that feedback is provided from the cleanroom and to the Process Owners so that the current processes can be updated to improve them / remove non-quality. Support to R&D / R&T for process developments and new process implementation, undertake process improvement and maintenance and monitor process implementation in operations. Support training module creation, maintenance & Delivery. (Support to process owner / Operations). Ensure where possible that ME process and procedures are standardised, optimised, current and usable by work with Process Owners to identify future improvements. Design of day to day operational tooling / manufacturing aids for manufacture execution Support the use of MGSE and Tooling and ensure feedback is provided to the MGSE team for issues and improvements. Review documentation and conduct safety reviews to support critical handling activities. Skills/Experience Required ESSENTIAL REQUIREMENTS: Extensive experience in the use of a digital Manufacturing Execution System such as 3DX Delmia (DM) and Delmia Apriso (MES) Experience in creating Manufacturing Bill of Materials (MBOM) consuming parts from the Engineering Digital Definition (EBOM) Process creation from standard library, creation of 3D works instructions and manipulation and annotation of 3D views for standard operating procedures. Appreciation of manufacturing techniques e.g. CFRP, structural bonding or TIG welding, within the space/aerospace industry - with a realistic minimum of five years' experience Mechanical & Electrical design / manufacturing / validation / experience Process and Quality driven approach with high attention to detail. Manufacturing / Test processes for the space industry. Use of Windchill, P6, IPS, 3D live, 3D experience or other similar systems Understanding of build documentation to ensure clear instructions are given to shop floor operators. Lean manufacturing techniques including 5S, root cause analysis and continuous improvement (Green belt). Mechanical handling equipment. Procedures and process control. Able to work offsite (UK and abroad) for undefined periods at short notice. Work overtime and occasional shifts, as and when required. Able to support out of normal hours work using the "on call" rota process, as and when required. High self-motivation and ability to deal with changing priorities on a multi project basis. Good planning skills and process competence (MRP/SAP system experience an advantage DESIRABLE REQUIREMENTS: A good understanding of spacecraft manufacture and build philosophies Clean room experience Knowledge of Health and Safety principles and their application to the specific environment Education & Training Strong experience in a similar role Working Pattern Monday to Friday days Option to change to weekly rotating double day shifts midway through assignment Travel Occasional travel to other UK sites Extension Probable extension after initial contract duration Base of Work This role will be working on site full time - free parking is provided for this role in a local car park. Reason for vacancy Workload Guidant Global (Airbus) is acting as an Employment Business in relation to this vacancy.
Dec 05, 2022
Full time
Job Profile Provide Manufacturing Engineering support to Operations including working with technicians, Inspectors, team leaders and KPO's as and when needed Support the generation of standard documentation in line with scheduled needs. Produce re-work instructions / deviation plans / discrepancies based on project requirements and identify parts and tooling required to carry them out - (materials, tooling, requirements and methodology) Support quality reviews and Root Cause Analysis using lean tools, including driving and owning PPS's. Support Lessons Learned exercises at key milestones involving all key stakeholders in phase (Operations, process owners, MAIT management, and design) Ensure that feedback is provided from the cleanroom and to the Process Owners so that the current processes can be updated to improve them / remove non-quality. Support to R&D / R&T for process developments and new process implementation, undertake process improvement and maintenance and monitor process implementation in operations. Support training module creation, maintenance & Delivery. (Support to process owner / Operations). Ensure where possible that ME process and procedures are standardised, optimised, current and usable by work with Process Owners to identify future improvements. Design of day to day operational tooling / manufacturing aids for manufacture execution Support the use of MGSE and Tooling and ensure feedback is provided to the MGSE team for issues and improvements. Review documentation and conduct safety reviews to support critical handling activities. Skills/Experience Required ESSENTIAL REQUIREMENTS: Extensive experience in the use of a digital Manufacturing Execution System such as 3DX Delmia (DM) and Delmia Apriso (MES) Experience in creating Manufacturing Bill of Materials (MBOM) consuming parts from the Engineering Digital Definition (EBOM) Process creation from standard library, creation of 3D works instructions and manipulation and annotation of 3D views for standard operating procedures. Appreciation of manufacturing techniques e.g. CFRP, structural bonding or TIG welding, within the space/aerospace industry - with a realistic minimum of five years' experience Mechanical & Electrical design / manufacturing / validation / experience Process and Quality driven approach with high attention to detail. Manufacturing / Test processes for the space industry. Use of Windchill, P6, IPS, 3D live, 3D experience or other similar systems Understanding of build documentation to ensure clear instructions are given to shop floor operators. Lean manufacturing techniques including 5S, root cause analysis and continuous improvement (Green belt). Mechanical handling equipment. Procedures and process control. Able to work offsite (UK and abroad) for undefined periods at short notice. Work overtime and occasional shifts, as and when required. Able to support out of normal hours work using the "on call" rota process, as and when required. High self-motivation and ability to deal with changing priorities on a multi project basis. Good planning skills and process competence (MRP/SAP system experience an advantage DESIRABLE REQUIREMENTS: A good understanding of spacecraft manufacture and build philosophies Clean room experience Knowledge of Health and Safety principles and their application to the specific environment Education & Training Strong experience in a similar role Working Pattern Monday to Friday days Option to change to weekly rotating double day shifts midway through assignment Travel Occasional travel to other UK sites Extension Probable extension after initial contract duration Base of Work This role will be working on site full time - free parking is provided for this role in a local car park. Reason for vacancy Workload Guidant Global (Airbus) is acting as an Employment Business in relation to this vacancy.
Jonathan Lee Recruitment
Wellingborough, Northamptonshire
Job Title: Composite Trimmer Would you like to put your own mark on a one of a kind product? Create something special? - Truly a one off? Would you like to have variety & different challenges day to day? Are you a Motorsport or Classic car enthusiast? Perhaps you're interested in the "next thing" or concept cars? How about the opportunity to use your handiwork and skills & continue gaining experience because you are working on something truly one off and special? This is an exciting opportunity for someone who has experience of preparing, trimming and fitting composite components to vehicles to get the chance to their skills and knowledge to develop prototype, one off, special build and motorsport vehicles. In return this Wellingborough based company will offer you a salary of circa £37,000 + benefits. Responsibilities of the Product Development Technician will be: Trim and fit composite components and prepare composite moulds primarily for the automotive industry whilst giving attention to detail, cost and quality. Work to technical drawings and internal and external specifications whilst ensuring accuracy and documenting the process Bond and trim assemblies to defined standards. Fettle moulds and patterns to defined standards. Cut and bond pattern materials to defined standards. Actively participate in the continuous improvement activities of the department. You will be someone with: Experience of trimming and fitting a range of composite materials in the motorsport, automotive or aerospace industries Experience of bonding complex assemblies with sub-assemblies, inserts and fixings. Experience of surface preparation for bonding metallic and composite materials. Good understanding of adhesives and bonding procedures. Have a high attention to detail, strong communication skills and ability to use your own initiative. Comfortable working to tight timeframes whilst adhering to high quality standards GCSE grades A - C. For further information on the Product Development Technician position please contact Chris Mead at Jonathan Lee Recruitment by email at or by telephone on: . Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
Dec 02, 2022
Full time
Job Title: Composite Trimmer Would you like to put your own mark on a one of a kind product? Create something special? - Truly a one off? Would you like to have variety & different challenges day to day? Are you a Motorsport or Classic car enthusiast? Perhaps you're interested in the "next thing" or concept cars? How about the opportunity to use your handiwork and skills & continue gaining experience because you are working on something truly one off and special? This is an exciting opportunity for someone who has experience of preparing, trimming and fitting composite components to vehicles to get the chance to their skills and knowledge to develop prototype, one off, special build and motorsport vehicles. In return this Wellingborough based company will offer you a salary of circa £37,000 + benefits. Responsibilities of the Product Development Technician will be: Trim and fit composite components and prepare composite moulds primarily for the automotive industry whilst giving attention to detail, cost and quality. Work to technical drawings and internal and external specifications whilst ensuring accuracy and documenting the process Bond and trim assemblies to defined standards. Fettle moulds and patterns to defined standards. Cut and bond pattern materials to defined standards. Actively participate in the continuous improvement activities of the department. You will be someone with: Experience of trimming and fitting a range of composite materials in the motorsport, automotive or aerospace industries Experience of bonding complex assemblies with sub-assemblies, inserts and fixings. Experience of surface preparation for bonding metallic and composite materials. Good understanding of adhesives and bonding procedures. Have a high attention to detail, strong communication skills and ability to use your own initiative. Comfortable working to tight timeframes whilst adhering to high quality standards GCSE grades A - C. For further information on the Product Development Technician position please contact Chris Mead at Jonathan Lee Recruitment by email at or by telephone on: . Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
Salary: £25,000 - £40,000 based on experience. SCITEK Consultants Ltd is a small engineering firm based in Derby. We currently employ 25 members of full-time staff, including 5 Technicians in our Workshop. We are now looking to increase our Manufacturing capability to meet increased demand. We are based within the R&D sector and each test rig we manufacture is a one off. Consequentially this position allows for a considerable variety of work not usually found within manufacturing. Day to day tasks include writing programs from models and drawings using Solidworks CAM, executing your own programs on our 3-axis toolroom mill or machining on one of our manual machines. Whilst we expect a strong background in machining, the right candidate will have the opportunity to become involved in all elements of engineering including design, fitting and overseeing experimental testing. Examples of the type of work you will be involved in include the running of gas turbine jet engines, ballistic testing and the running of spinning rigs. We require good problem-solving skills, attention to detail and ability to come up with new ideas. The candidate must be qualified to NVQ 2 or higher with at least 5 years industrial experience in manual turning and milling and CNC machining. Typical working hours for our Technicians are between 7.00 and 15.00. Company Information: SCITEK Consultants Ltd is based in Derby and provides R&D services to Aerospace, Marine and Power generation companies. We have a reputation for first class work and we offer an attractive work environment with performance related salary, pension contributions and medical cover
Dec 02, 2022
Full time
Salary: £25,000 - £40,000 based on experience. SCITEK Consultants Ltd is a small engineering firm based in Derby. We currently employ 25 members of full-time staff, including 5 Technicians in our Workshop. We are now looking to increase our Manufacturing capability to meet increased demand. We are based within the R&D sector and each test rig we manufacture is a one off. Consequentially this position allows for a considerable variety of work not usually found within manufacturing. Day to day tasks include writing programs from models and drawings using Solidworks CAM, executing your own programs on our 3-axis toolroom mill or machining on one of our manual machines. Whilst we expect a strong background in machining, the right candidate will have the opportunity to become involved in all elements of engineering including design, fitting and overseeing experimental testing. Examples of the type of work you will be involved in include the running of gas turbine jet engines, ballistic testing and the running of spinning rigs. We require good problem-solving skills, attention to detail and ability to come up with new ideas. The candidate must be qualified to NVQ 2 or higher with at least 5 years industrial experience in manual turning and milling and CNC machining. Typical working hours for our Technicians are between 7.00 and 15.00. Company Information: SCITEK Consultants Ltd is based in Derby and provides R&D services to Aerospace, Marine and Power generation companies. We have a reputation for first class work and we offer an attractive work environment with performance related salary, pension contributions and medical cover