Job Title: Applied Scientist - Airborne Anti-Submarine Warfare Location: Farnborough, Hampshire + Adaptive Working Arrangement Package: Highly Competitive Salary + Benefits Package Role Type: Full time / Permanent Role ID: SF14268 Be part of the QinetiQ journey. Join us as a Systems Engineer - Airborne Anti-Submarine Warfare at our Farnborough site where you will have the opportunity to work with cutting-edge technology and many of the industry's most brilliant minds. The role We are looking for a highly motivated Applied Scientist to support QinetiQ's AASW team. AASW delivers to its clients a range of services across a broad spectrum of science and engineering disciplines including research and development, independent and technical specialist advice and independent test and evaluation. Delivered from the Farnborough based centre of excellence, the AASW team is internationally renowned for the practical application of its deep-domain knowledge. The team works closely with its customers to design and implement advanced solutions to address real-world challenges. This includes the independent characterisation and performance evaluation of AASW acoustic systems requiring sensor simulation and aircraft stimulation with high fidelity test signals. The capability is supported by a deep understanding of acoustic processing systems and theory. Opportunities to join and be 'hands-on' within this dynamic team are open to successful applicants. QinetiQ is seeking a range of skills and experience levels to fulfil a number of roles within this enduring UK Sovereign capability. This is a full-time role, 37 hours per week and based at our Farnborough site. We flexible, adaptive working arrangements, however a proportion of the work is required to be carried out on site, due to the nature of the equipment and Labs used. Accountabilities of the Applied Scientist Practical application of academic learning Problem solving and the application of science underpinned by a tailored life-cycle approach e.g. Systems/Software Engineering Lifecycle Use of rapid-prototyping techniques to inform system design decisions Self-motivated team member that takes ownership of tasking whilst operating collaboratively within a dynamic team A desire to learn, broadening and sharing knowledge within this exciting domain is essential, to increase team expertise and resilience Essential experience of the Applied Scientist Software Engineering toolset - LabVIEW and MATLAB desirable Qualifications for the Applied Scientist Educated to degree level (or equivalent) in Physics, Maths, Oceanography, Electronics or relevant engineering discipline Please note that all applicants must be eligible for SC clearance as a minimum. Please visit the 'UKSV National Security Vetting Solution: Guidance for Applicants' GOV.UK Website Our Benefits Adaptive and flexible working Generous holiday allowance Health Cash Plan, Private Medical Insurance and Dental Insurance Matched contribution pension scheme, with life assurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more Holiday Trading is a benefit that allows most employees to buy up to 5 days' additional leave We are proud to support the Armed Forces community by honouring the Armed Forces Covenant Payroll Giving and Volunteering - helping charities and local community Application Guidance If you have a disability or need any reasonable adjustments during the application and selection stages, please contact your regional recruiting team in strictest confidence. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview. JBRP1_UKTJ
May 05, 2024
Full time
Job Title: Applied Scientist - Airborne Anti-Submarine Warfare Location: Farnborough, Hampshire + Adaptive Working Arrangement Package: Highly Competitive Salary + Benefits Package Role Type: Full time / Permanent Role ID: SF14268 Be part of the QinetiQ journey. Join us as a Systems Engineer - Airborne Anti-Submarine Warfare at our Farnborough site where you will have the opportunity to work with cutting-edge technology and many of the industry's most brilliant minds. The role We are looking for a highly motivated Applied Scientist to support QinetiQ's AASW team. AASW delivers to its clients a range of services across a broad spectrum of science and engineering disciplines including research and development, independent and technical specialist advice and independent test and evaluation. Delivered from the Farnborough based centre of excellence, the AASW team is internationally renowned for the practical application of its deep-domain knowledge. The team works closely with its customers to design and implement advanced solutions to address real-world challenges. This includes the independent characterisation and performance evaluation of AASW acoustic systems requiring sensor simulation and aircraft stimulation with high fidelity test signals. The capability is supported by a deep understanding of acoustic processing systems and theory. Opportunities to join and be 'hands-on' within this dynamic team are open to successful applicants. QinetiQ is seeking a range of skills and experience levels to fulfil a number of roles within this enduring UK Sovereign capability. This is a full-time role, 37 hours per week and based at our Farnborough site. We flexible, adaptive working arrangements, however a proportion of the work is required to be carried out on site, due to the nature of the equipment and Labs used. Accountabilities of the Applied Scientist Practical application of academic learning Problem solving and the application of science underpinned by a tailored life-cycle approach e.g. Systems/Software Engineering Lifecycle Use of rapid-prototyping techniques to inform system design decisions Self-motivated team member that takes ownership of tasking whilst operating collaboratively within a dynamic team A desire to learn, broadening and sharing knowledge within this exciting domain is essential, to increase team expertise and resilience Essential experience of the Applied Scientist Software Engineering toolset - LabVIEW and MATLAB desirable Qualifications for the Applied Scientist Educated to degree level (or equivalent) in Physics, Maths, Oceanography, Electronics or relevant engineering discipline Please note that all applicants must be eligible for SC clearance as a minimum. Please visit the 'UKSV National Security Vetting Solution: Guidance for Applicants' GOV.UK Website Our Benefits Adaptive and flexible working Generous holiday allowance Health Cash Plan, Private Medical Insurance and Dental Insurance Matched contribution pension scheme, with life assurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more Holiday Trading is a benefit that allows most employees to buy up to 5 days' additional leave We are proud to support the Armed Forces community by honouring the Armed Forces Covenant Payroll Giving and Volunteering - helping charities and local community Application Guidance If you have a disability or need any reasonable adjustments during the application and selection stages, please contact your regional recruiting team in strictest confidence. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview. JBRP1_UKTJ
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Location - Halstead, Witham, Braintree, Essex Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 basic 25 days holiday (purchase up to 5 extra days holiday) Location Allowance (£3000 per annum) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Referral bonus scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 05, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Location - Halstead, Witham, Braintree, Essex Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 basic 25 days holiday (purchase up to 5 extra days holiday) Location Allowance (£3000 per annum) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Referral bonus scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Overview Important: Due to the level of security clearance required, all applicants must as a minimum hold British Nationality as their sole and primary nationality. Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. Office site presence, anticipated 2-3 days onsite, depending on project needs. Want to work for a successful business, who develop advanced specialist systems to deliver warfighting edge in the modern maritime and underwater battlespace? The company have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! The Senior Chief Engineer is expected to be or to become the definitive technical expert for UK products, understanding all aspects of product design and able to make key decisions concerning new designs and design updates. They may also act as the delegated signatory for company, certifying that the designs continue to be seaworthy, safe and fully compliant to all relevant UK & international regulations. Responsibilities include: To provide inputs, as required, into Bids and Proposals, including, where appropriate, planning the technical programme of work in conjunction with project management, providing input to technical proposals, engineering estimates and work packages. Note that the Capability and Product teams will remain the primary interface to the customer for business development and bid purposes, but the Senior Chief Engineer will want to ensure that different products are using common and modular architectures and components to maximise re-use, so will be consulted on system architectures and delivery methodology. To provide technical leadership into projects and product teams as needed, such that the aims of the business to develop strong future product lines whilst maintaining On-Time Delivery (OTD) of contracted work at the target levels for the business are fully met. This is in support of existing project leads such as PEL and SDA, with the Senior Chief Engineer in particular acting as an escalation route for SDAs on issues of design compliance. To provide strong technical governance to all sonar projects, such that all designs are compliant, reliable, safe and of a high technical quality while meeting project targets for cost and schedule. This could involve guiding product and project teams, chairing design reviews, inputting into project deliverables or providing independent review. Stay up to date with industry trends and technologies, and integrate them into the team's work as appropriate with particular emphasis on compliance and safety standards. Provide the necessary support to achieve export permissions for our products and projects, particularly in regard to security architectures and emerging Cyber-security standards. This may require attendance of workshops with ECJU and other export authorities, drawing on other businesses and working with external partners to develop the new technologies required to assure future products. To ensure all platform sonar designs consider reliability and design for manufacture throughout their lifecycle, and to liaise closely with the Manufacturing Engineering and production teams to ensure products can be manufactured to the required UPC and through life cost targets. This is a strategic and senior hire for the business, where the senior chief engineer will be leading a team of three chief engineers, across three major business streams. This is a fantastic opportunity for an individual to join a thriving company and have the ability to influence. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Must be able to influence and lead various stakeholders and teams. Experience within Design Authority, understanding all aspects of product design and able to make key decisions concerning new designs and design updates Technically competent in the tools and technologies used by the team (requirements management tools such as DOORS or Jama, CAD tools (with sufficient familiarity to enable review), PLM tools such as Windchill etc.), to allow review/assist with technical work where needed. Help deliver the Business' strategic plans for long term growth. Customer-facing, particularly to represent the customer within the business on projects such that the customer needs with regard to security, reliability and supportability are appropriately prioritized. Generate all the good ideas, but should be able to create an environment of trust and psychological safety in which innovation flourishes within creative and engaged teams. Provide strong governance across projects and product teams. Deliver effective Engineering input into bids, proposals and projects, often on a tight schedule, maintaining high OTD standards whilst also managing our product lines means we may ask the individual to juggle and balance multiple priorities with minimal supervision. Experience in the following would be desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Technical knowledge of Sonar and associated naval systems, and of good engineering practices is essential, including familiarity with the regulatory environment for maritime products JBRP1_UKTJ
May 05, 2024
Full time
Overview Important: Due to the level of security clearance required, all applicants must as a minimum hold British Nationality as their sole and primary nationality. Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. Office site presence, anticipated 2-3 days onsite, depending on project needs. Want to work for a successful business, who develop advanced specialist systems to deliver warfighting edge in the modern maritime and underwater battlespace? The company have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! The Senior Chief Engineer is expected to be or to become the definitive technical expert for UK products, understanding all aspects of product design and able to make key decisions concerning new designs and design updates. They may also act as the delegated signatory for company, certifying that the designs continue to be seaworthy, safe and fully compliant to all relevant UK & international regulations. Responsibilities include: To provide inputs, as required, into Bids and Proposals, including, where appropriate, planning the technical programme of work in conjunction with project management, providing input to technical proposals, engineering estimates and work packages. Note that the Capability and Product teams will remain the primary interface to the customer for business development and bid purposes, but the Senior Chief Engineer will want to ensure that different products are using common and modular architectures and components to maximise re-use, so will be consulted on system architectures and delivery methodology. To provide technical leadership into projects and product teams as needed, such that the aims of the business to develop strong future product lines whilst maintaining On-Time Delivery (OTD) of contracted work at the target levels for the business are fully met. This is in support of existing project leads such as PEL and SDA, with the Senior Chief Engineer in particular acting as an escalation route for SDAs on issues of design compliance. To provide strong technical governance to all sonar projects, such that all designs are compliant, reliable, safe and of a high technical quality while meeting project targets for cost and schedule. This could involve guiding product and project teams, chairing design reviews, inputting into project deliverables or providing independent review. Stay up to date with industry trends and technologies, and integrate them into the team's work as appropriate with particular emphasis on compliance and safety standards. Provide the necessary support to achieve export permissions for our products and projects, particularly in regard to security architectures and emerging Cyber-security standards. This may require attendance of workshops with ECJU and other export authorities, drawing on other businesses and working with external partners to develop the new technologies required to assure future products. To ensure all platform sonar designs consider reliability and design for manufacture throughout their lifecycle, and to liaise closely with the Manufacturing Engineering and production teams to ensure products can be manufactured to the required UPC and through life cost targets. This is a strategic and senior hire for the business, where the senior chief engineer will be leading a team of three chief engineers, across three major business streams. This is a fantastic opportunity for an individual to join a thriving company and have the ability to influence. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Must be able to influence and lead various stakeholders and teams. Experience within Design Authority, understanding all aspects of product design and able to make key decisions concerning new designs and design updates Technically competent in the tools and technologies used by the team (requirements management tools such as DOORS or Jama, CAD tools (with sufficient familiarity to enable review), PLM tools such as Windchill etc.), to allow review/assist with technical work where needed. Help deliver the Business' strategic plans for long term growth. Customer-facing, particularly to represent the customer within the business on projects such that the customer needs with regard to security, reliability and supportability are appropriately prioritized. Generate all the good ideas, but should be able to create an environment of trust and psychological safety in which innovation flourishes within creative and engaged teams. Provide strong governance across projects and product teams. Deliver effective Engineering input into bids, proposals and projects, often on a tight schedule, maintaining high OTD standards whilst also managing our product lines means we may ask the individual to juggle and balance multiple priorities with minimal supervision. Experience in the following would be desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Technical knowledge of Sonar and associated naval systems, and of good engineering practices is essential, including familiarity with the regulatory environment for maritime products JBRP1_UKTJ
Are you a Senior Electrical Engineer looking for a new challenge, based in Worthing? Do you have experience working with inverters, power supplies, or power electronics in driver and motor applications? If so, I have the role for you! My client is a Market Leader in pushing the boundaries of science to deliver innovative products that are intrinsic to everyday life, and due to expansion, they are looking for a Senior Electrical Engineer to join the R&D team in Worthing. As the Senior Electrical Engineer, you will be responsible for the following: Act as lead electrical technical contact on allocated projects from concept to final sign off Assist with generation and review of technical and commercial proposals Review customer supplied standards and requirements Generate cabinet projects documentation (schematics, manuals, test procedures) To be a successful applicant for the Senior Electrical Engineer job your skills/experience will involve the following: Previous experience in inverter drive systems (desirable) Experience of design for certification for EMC, Machinery, low voltage directives Experience of design for certification for hazardous areas Degree in electrical/ electronic/ mechatronic engineering APPLY NOW, or if you would like to find more information regarding the Senior Electrical Engineer job-based in Worthing, please call Klea Leka on / , or email an updated version of your CV to . Otherwise, we always welcome the opportunity to discuss other engineering jobs.
May 05, 2024
Full time
Are you a Senior Electrical Engineer looking for a new challenge, based in Worthing? Do you have experience working with inverters, power supplies, or power electronics in driver and motor applications? If so, I have the role for you! My client is a Market Leader in pushing the boundaries of science to deliver innovative products that are intrinsic to everyday life, and due to expansion, they are looking for a Senior Electrical Engineer to join the R&D team in Worthing. As the Senior Electrical Engineer, you will be responsible for the following: Act as lead electrical technical contact on allocated projects from concept to final sign off Assist with generation and review of technical and commercial proposals Review customer supplied standards and requirements Generate cabinet projects documentation (schematics, manuals, test procedures) To be a successful applicant for the Senior Electrical Engineer job your skills/experience will involve the following: Previous experience in inverter drive systems (desirable) Experience of design for certification for EMC, Machinery, low voltage directives Experience of design for certification for hazardous areas Degree in electrical/ electronic/ mechatronic engineering APPLY NOW, or if you would like to find more information regarding the Senior Electrical Engineer job-based in Worthing, please call Klea Leka on / , or email an updated version of your CV to . Otherwise, we always welcome the opportunity to discuss other engineering jobs.
Unleash the Power of Multi-Mission Excellence: Safeguarding the Seas for the World's Navies. Step into a world where cutting-edge technology meets unparalleled expertise. Ultra Maritime pioneers delivering multi-mission solutions that protect and empower the naval forces worldwide. With our extensive portfolio of capabilities, our innovations are utilised on naval fleets across our allied navies around the globe. As the maritime and underwater battlespace evolves, we tirelessly push the boundaries to develop advanced specialist systems that provide our 'five-eyes' Defence customers with an unbeatable warfighting edge. From surface vessels to sub-surface operations and unmanned platforms, we are revolutionizing the way naval missions are executed. We thrive on collaboration and partnering with our customers to ensure mission success. Our expert solutions encompass an array of game-changing technologies, including state-of-the-art sonar, radar, expendables, signature management, and naval power systems. Join us in shaping the future of naval warfare and together, we will safeguard the seas and empower navies worldwide! Flexible Working At Ultra Maritime, we understand that your personal life is just as important as your professional one. That's why we support and promote flexible working arrangements where possible. Whether you prefer a hybrid model, working remotely, or the structure of being on-site, we will support you as best as we can. Embrace the freedom to shape your work hours according to your needs, whether it's part-time, compressed hours, or a unique arrangement that suits your lifestyle. Loudwater, Greenford, and Weymouth exclusively offer a 9-day fortnight working pattern, offering extended weekends every other week, granting you more time to pursue your passions. And that's not all - we provide flexible start and finish times. It's the 'innovating' and 'empowering' values that we ASPIRE to be. We welcome the challenge to work in new ways and have trust in you when getting the job done because we recognise, our business is our people. Job Description This is an exciting opportunity for a Senior Electronics Engineer to design solutions for the Electronics content of our wide range of Sonar, Sonobuoy and Maritime Defence systems over the whole lifecycle of the product. This also includes supporting transition to manufacturing and providing ad-hoc electronics support for systems already in-service. This diverse position offers the opportunity for off-site work to conduct Sea Trials and assist with Ship installations. The Senior Electronics Engineer will support cutting edge technologies for developing future capability in Future Anti-Submarine Warfare (FASW). Key Responsibilities as a Senior Electronics Engineer: Interpretation of system requirements and ability to decompose and flow them down into hardware requirements; Conduct Electronics and/or Firmware development activities and reviews, covering full system, sub-system and individual board design/coding; Ensure that the technical solution meets the customer, legislative and business requirements; Responsible for some level of technical oversight of the engineering activities throughout the project lifecycle; Responsible for supporting the team planning and estimation activities at the kick-off of new projects; Act as Project Engineering Lead (PEL) and/or Work Package Manager (WPM) on one or more projects; To identify and resolve qualification, certification and safety issues; Produce project technical documentation, including: Management Plans, Requirements Specifications, Design Documents, Interface Specifications and Acceptance Tests, Approval of design change requests and concessions; Coaching and mentoring of more junior Engineers; Liaising with customers and suppliers as appropriate; Overseeing initial test and integration including formal testing; Role Requirements: In-depth experience across the whole project lifecycle as electronics/firmware engineer, from bids and proposals through to in-service support (ideally from within the defence sector). Hands-on experience of designing complex systems involving multiple electronics disciplines and understanding of associated challenges / usual pitfalls. Successful delivery of reliable solutions to timescale and budget as part of fixed price contracts. Used to dealing with a wide range of stakeholders beyond Electronics Engineering domain (i.e. Project Management, Systems, Mechanical and Software Engineering) as part of multi-disciplinary project team to resolve issues that arise during the lifespan of a project. Degree level (or equivalent) in engineering discipline Breadth of exposure to the following: Analog and digital technologies, Design for EMC, Electrical Safety & Signal Integrity including schematic and PCB layout, Exposure to appropriate branch of electronics (e.g. power/high speed digital/analogue/RF/Sonar); Familiarity with one or more PMRP and ECAD tools; Design for manufacture, understanding of full project life cycle. Prototyping, test and verification of electronic subsystems at PCB, unit and sub-system level. Component selection and an understanding of associated issues to include obsolescence and environmental aspects (REACH, RoHS etc.) Use of standard office tools and knowledge of engineering tools such as DOORS, ERPs and Configuration Management tools. The Candidate must be capable of acquiring SC clearance as a minimum. Desirable Experience Design for Low Noise, Low Power Analogue Receiver front ends utilising JFETs and Low noise differential Amplifiers, MicroSemi/Intel FPGA Design experience 24 Bit ADC Design Filter Design VME/VPX Design Experience Power Amplifier design SIC FET technology up to 1500V DC Power Supply Design Mains Supply and DC-DC converters Cadstar ECAD experience Relocation Support Attracting high-level talent and people that can add value and expertise, is vital to our success. Attracting and retaining brilliant people is imperative so that's why we search across the UK for talent. We offer financial support to candidates that are considering relocating; this is considered on a case-by-case basis per role and subject to HMRC guidelines. Nationality Requirements Candidates must be eligible to obtain the relevant security clearance required for the role, due to the nature of the programmes we deliver for our customers. Diverse & Inclusive Employer Ultra Maritime is an equal opportunities employer that values diversity, inclusion, equity and equality. Underpinned by our values, behaviours, and policies, we want you to feel empowered to be your best and authentic self. We promote a workplace that welcomes people from all backgrounds and cultures; believing that this will increase our diversity of thinking, and ultimately ensure we continue delivering on our commitments to our customers. We do not discriminate based on race, religion, colour, national origin, gender identity, sexual orientation, age, marital status, veteran status, or disability status and welcome applications from all candidates.
May 04, 2024
Full time
Unleash the Power of Multi-Mission Excellence: Safeguarding the Seas for the World's Navies. Step into a world where cutting-edge technology meets unparalleled expertise. Ultra Maritime pioneers delivering multi-mission solutions that protect and empower the naval forces worldwide. With our extensive portfolio of capabilities, our innovations are utilised on naval fleets across our allied navies around the globe. As the maritime and underwater battlespace evolves, we tirelessly push the boundaries to develop advanced specialist systems that provide our 'five-eyes' Defence customers with an unbeatable warfighting edge. From surface vessels to sub-surface operations and unmanned platforms, we are revolutionizing the way naval missions are executed. We thrive on collaboration and partnering with our customers to ensure mission success. Our expert solutions encompass an array of game-changing technologies, including state-of-the-art sonar, radar, expendables, signature management, and naval power systems. Join us in shaping the future of naval warfare and together, we will safeguard the seas and empower navies worldwide! Flexible Working At Ultra Maritime, we understand that your personal life is just as important as your professional one. That's why we support and promote flexible working arrangements where possible. Whether you prefer a hybrid model, working remotely, or the structure of being on-site, we will support you as best as we can. Embrace the freedom to shape your work hours according to your needs, whether it's part-time, compressed hours, or a unique arrangement that suits your lifestyle. Loudwater, Greenford, and Weymouth exclusively offer a 9-day fortnight working pattern, offering extended weekends every other week, granting you more time to pursue your passions. And that's not all - we provide flexible start and finish times. It's the 'innovating' and 'empowering' values that we ASPIRE to be. We welcome the challenge to work in new ways and have trust in you when getting the job done because we recognise, our business is our people. Job Description This is an exciting opportunity for a Senior Electronics Engineer to design solutions for the Electronics content of our wide range of Sonar, Sonobuoy and Maritime Defence systems over the whole lifecycle of the product. This also includes supporting transition to manufacturing and providing ad-hoc electronics support for systems already in-service. This diverse position offers the opportunity for off-site work to conduct Sea Trials and assist with Ship installations. The Senior Electronics Engineer will support cutting edge technologies for developing future capability in Future Anti-Submarine Warfare (FASW). Key Responsibilities as a Senior Electronics Engineer: Interpretation of system requirements and ability to decompose and flow them down into hardware requirements; Conduct Electronics and/or Firmware development activities and reviews, covering full system, sub-system and individual board design/coding; Ensure that the technical solution meets the customer, legislative and business requirements; Responsible for some level of technical oversight of the engineering activities throughout the project lifecycle; Responsible for supporting the team planning and estimation activities at the kick-off of new projects; Act as Project Engineering Lead (PEL) and/or Work Package Manager (WPM) on one or more projects; To identify and resolve qualification, certification and safety issues; Produce project technical documentation, including: Management Plans, Requirements Specifications, Design Documents, Interface Specifications and Acceptance Tests, Approval of design change requests and concessions; Coaching and mentoring of more junior Engineers; Liaising with customers and suppliers as appropriate; Overseeing initial test and integration including formal testing; Role Requirements: In-depth experience across the whole project lifecycle as electronics/firmware engineer, from bids and proposals through to in-service support (ideally from within the defence sector). Hands-on experience of designing complex systems involving multiple electronics disciplines and understanding of associated challenges / usual pitfalls. Successful delivery of reliable solutions to timescale and budget as part of fixed price contracts. Used to dealing with a wide range of stakeholders beyond Electronics Engineering domain (i.e. Project Management, Systems, Mechanical and Software Engineering) as part of multi-disciplinary project team to resolve issues that arise during the lifespan of a project. Degree level (or equivalent) in engineering discipline Breadth of exposure to the following: Analog and digital technologies, Design for EMC, Electrical Safety & Signal Integrity including schematic and PCB layout, Exposure to appropriate branch of electronics (e.g. power/high speed digital/analogue/RF/Sonar); Familiarity with one or more PMRP and ECAD tools; Design for manufacture, understanding of full project life cycle. Prototyping, test and verification of electronic subsystems at PCB, unit and sub-system level. Component selection and an understanding of associated issues to include obsolescence and environmental aspects (REACH, RoHS etc.) Use of standard office tools and knowledge of engineering tools such as DOORS, ERPs and Configuration Management tools. The Candidate must be capable of acquiring SC clearance as a minimum. Desirable Experience Design for Low Noise, Low Power Analogue Receiver front ends utilising JFETs and Low noise differential Amplifiers, MicroSemi/Intel FPGA Design experience 24 Bit ADC Design Filter Design VME/VPX Design Experience Power Amplifier design SIC FET technology up to 1500V DC Power Supply Design Mains Supply and DC-DC converters Cadstar ECAD experience Relocation Support Attracting high-level talent and people that can add value and expertise, is vital to our success. Attracting and retaining brilliant people is imperative so that's why we search across the UK for talent. We offer financial support to candidates that are considering relocating; this is considered on a case-by-case basis per role and subject to HMRC guidelines. Nationality Requirements Candidates must be eligible to obtain the relevant security clearance required for the role, due to the nature of the programmes we deliver for our customers. Diverse & Inclusive Employer Ultra Maritime is an equal opportunities employer that values diversity, inclusion, equity and equality. Underpinned by our values, behaviours, and policies, we want you to feel empowered to be your best and authentic self. We promote a workplace that welcomes people from all backgrounds and cultures; believing that this will increase our diversity of thinking, and ultimately ensure we continue delivering on our commitments to our customers. We do not discriminate based on race, religion, colour, national origin, gender identity, sexual orientation, age, marital status, veteran status, or disability status and welcome applications from all candidates.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Location - Halstead, Witham, Braintree, Essex Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 basic 25 days holiday (purchase up to 5 extra days holiday) Location Allowance (£3000 per annum) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Referral bonus scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 04, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Location - Halstead, Witham, Braintree, Essex Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 basic 25 days holiday (purchase up to 5 extra days holiday) Location Allowance (£3000 per annum) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Referral bonus scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
May 04, 2024
Full time
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Locations - Reading, Swindon (M4 Corridor) Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 04, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Locations - Reading, Swindon (M4 Corridor) Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
May 04, 2024
Full time
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Location - Halstead, Witham, Braintree, Essex Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 basic 25 days holiday (purchase up to 5 extra days holiday) Location Allowance (£3000 per annum) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Referral bonus scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 04, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Location - Halstead, Witham, Braintree, Essex Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 basic 25 days holiday (purchase up to 5 extra days holiday) Location Allowance (£3000 per annum) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Referral bonus scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Bennett and Game Recruitment
Aberdeen, Aberdeenshire
Field Service Engineer required . Bennett and Game are currently working with a marine company who are looking to expand their Field Service team. This company specialises in Electronic equipment on board vessels, including radars, satellites, and GPS navigation systems and data recorders. The ideal candidate will be qualified in Electronics and have experience in a field based role. The candidate must have a full driving license, passport and be based within a commutable distance of Aberdeen. Electronic Service Engineer Position Overview The repair and maintenance of different electronic marine equipment. Perform surveys and inspections on customer's vessels. To be able to carry out VDR annual performance tests. Support the Lead Engineer in service and installation of on board electronics. Based in Aberdeen, but this role will include occasional travel around the UK and overseas. Experience working on GPS, X&S band radars, VHF & MF/HF radio communications, satellite and voyage data recorders Electronic Service Engineer Position Requirements HNC or HND in Electronics Experience on Marine Electronics desirable, however other electronic servicing backgrounds within communications or surveying considered Full Driving License Passport Working at height desirable Weekend and out of hours work will be required on an ad-hoc basis Electronic Service Engineer Position Remuneration Salary: £26,000 - £40,000 Marine electronic experience will attract the higher end of the salary Company van, work wear, mobile phone and laptop provided Working hours - 7:30am - 4:00pm Overtime available Pension scheme Discretionary bonus scheme 33 days holiday inclusive of bank holidays Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
May 04, 2024
Full time
Field Service Engineer required . Bennett and Game are currently working with a marine company who are looking to expand their Field Service team. This company specialises in Electronic equipment on board vessels, including radars, satellites, and GPS navigation systems and data recorders. The ideal candidate will be qualified in Electronics and have experience in a field based role. The candidate must have a full driving license, passport and be based within a commutable distance of Aberdeen. Electronic Service Engineer Position Overview The repair and maintenance of different electronic marine equipment. Perform surveys and inspections on customer's vessels. To be able to carry out VDR annual performance tests. Support the Lead Engineer in service and installation of on board electronics. Based in Aberdeen, but this role will include occasional travel around the UK and overseas. Experience working on GPS, X&S band radars, VHF & MF/HF radio communications, satellite and voyage data recorders Electronic Service Engineer Position Requirements HNC or HND in Electronics Experience on Marine Electronics desirable, however other electronic servicing backgrounds within communications or surveying considered Full Driving License Passport Working at height desirable Weekend and out of hours work will be required on an ad-hoc basis Electronic Service Engineer Position Remuneration Salary: £26,000 - £40,000 Marine electronic experience will attract the higher end of the salary Company van, work wear, mobile phone and laptop provided Working hours - 7:30am - 4:00pm Overtime available Pension scheme Discretionary bonus scheme 33 days holiday inclusive of bank holidays Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
Service Engineer - Electronics East Midlands £35k - £40K p/a + annual bonus of £7k Are you an experience Service Engineer or Test Engineer who would be interested in a service role for a test equipment manufacturer. They are involved in test system design, build, fixturing, and software, ensuring quality products and services for global clients across various sectors click apply for full job details
May 04, 2024
Full time
Service Engineer - Electronics East Midlands £35k - £40K p/a + annual bonus of £7k Are you an experience Service Engineer or Test Engineer who would be interested in a service role for a test equipment manufacturer. They are involved in test system design, build, fixturing, and software, ensuring quality products and services for global clients across various sectors click apply for full job details
As a Senior Regional Service Engineer, you will join a dedicated service team, where you will play a pivotal role in upholding the Kärcher brand while delivering exceptional service to their customers. Within this role you will predominantly, maintain and repair for the South West covering Oxford to Swindon. This role offers an exciting opportunity to contribute to the growth and success of Kärcher by providing first class professional service and support for industrial cleaning equipment. Kärcher, a globally recognised leader in cleaning technology renowned for commitment to innovation, quality, and customer satisfaction, Kärcher offers a dynamic work environment where employees can excel and grow professionally. Key Responsibilities for the Senior Regional Service Engineer Maintain a high standard of service and repair on all cleaning equipment, ensuring world-class service delivery Serve as a custodian of the Kärcher brand, embodying the values in all interactions Communicate regularly with the Regional Service Manager to coordinate activities and address customer needs Diagnose and repair a wide range of industrial cleaning equipment, including municipal machinery Complete work orders promptly and accurately, maintaining meticulous records Manage stock in accordance with customer requirements, ensuring optimal inventory levels Collaborate with the regional scheduler to optimise efficiency and customer satisfaction Identify and communicate sales leads to the relevant sales personnel, contributing to business growth Develop positive relationships with customers and internal teams Participate in on-the-job coaching and personal development activities Qualifications and Experience for the Senior Regional Service Engineer Formal mechanical/electrical qualifications are required Experience, attributes and skills required for the Senior Regional Service Engineer Proficiency in electronics, batteries, hydraulics, pneumatics, mechanical, and diesel engines Experience with municipal cleaning equipment, fork trucks, HGVs, plant hire, horticultural, or agricultural machinery is advantageous. Proven experience in the service and/or cleaning industry is preferred, or willingness to undergo fast-track training Excellent communication skills and ability to work effectively in a team environment Strong organisational skills with the capacity to manage multiple tasks efficiently A full UK driving license is essential, with willingness to travel and stay overnight as required Passport for potential training in Germany is preferred What's in it for You This is a great opportunity to join a market leader, who offers a collaborative culture and progression opportunities. The starting salary offered is £38,000 rising to £39,250 after probation, based on a 40 hour week Monday - Friday with OTE £50K with overtime. You will receive a fully expensed vehicle, with optional private use, all tools provided. You will receive 25 days holidays, plus bank holidays and your Birthday too, progression opportunities, pension scheme, end of year discretionary bonus, health plan, critical illness cover, sick pay, staff discounts, plenty of social events and more!
May 04, 2024
Full time
As a Senior Regional Service Engineer, you will join a dedicated service team, where you will play a pivotal role in upholding the Kärcher brand while delivering exceptional service to their customers. Within this role you will predominantly, maintain and repair for the South West covering Oxford to Swindon. This role offers an exciting opportunity to contribute to the growth and success of Kärcher by providing first class professional service and support for industrial cleaning equipment. Kärcher, a globally recognised leader in cleaning technology renowned for commitment to innovation, quality, and customer satisfaction, Kärcher offers a dynamic work environment where employees can excel and grow professionally. Key Responsibilities for the Senior Regional Service Engineer Maintain a high standard of service and repair on all cleaning equipment, ensuring world-class service delivery Serve as a custodian of the Kärcher brand, embodying the values in all interactions Communicate regularly with the Regional Service Manager to coordinate activities and address customer needs Diagnose and repair a wide range of industrial cleaning equipment, including municipal machinery Complete work orders promptly and accurately, maintaining meticulous records Manage stock in accordance with customer requirements, ensuring optimal inventory levels Collaborate with the regional scheduler to optimise efficiency and customer satisfaction Identify and communicate sales leads to the relevant sales personnel, contributing to business growth Develop positive relationships with customers and internal teams Participate in on-the-job coaching and personal development activities Qualifications and Experience for the Senior Regional Service Engineer Formal mechanical/electrical qualifications are required Experience, attributes and skills required for the Senior Regional Service Engineer Proficiency in electronics, batteries, hydraulics, pneumatics, mechanical, and diesel engines Experience with municipal cleaning equipment, fork trucks, HGVs, plant hire, horticultural, or agricultural machinery is advantageous. Proven experience in the service and/or cleaning industry is preferred, or willingness to undergo fast-track training Excellent communication skills and ability to work effectively in a team environment Strong organisational skills with the capacity to manage multiple tasks efficiently A full UK driving license is essential, with willingness to travel and stay overnight as required Passport for potential training in Germany is preferred What's in it for You This is a great opportunity to join a market leader, who offers a collaborative culture and progression opportunities. The starting salary offered is £38,000 rising to £39,250 after probation, based on a 40 hour week Monday - Friday with OTE £50K with overtime. You will receive a fully expensed vehicle, with optional private use, all tools provided. You will receive 25 days holidays, plus bank holidays and your Birthday too, progression opportunities, pension scheme, end of year discretionary bonus, health plan, critical illness cover, sick pay, staff discounts, plenty of social events and more!
About Our Client Our autonomous data capturing technology and insights generation capabilities help to measure, track, and find goods across warehouses in real time while building the ultimate digital twin of facilities. Join us at a very exciting time of growth as we're significantly ramping up all areas of the business to lead the way in logistics data globally, backed by some of Europe's best VCs and driven by passion, curiosity, and teamwork. We value humility and we're as interested in your character as we are in your talent. Please apply, even if you feel you only meet part of our listed criteria. Diversity drives innovation, and we offer an international and friendly work environment with an energetic company culture. Senior Electronics Engineer As a Senior Electronics Engineer, you will play a key role in designing and building our electronics platform that supports our autonomous robotics system. You will work with our Mechanical, Software, and Embedded teams to design, implement, and test the electronics that power our robots to provide the features, performance, and safety the platform requires. Your Impact Own the design and implementation of next-generation electronic sensor systems, controllers, and power modules. Take ownership of electronics architecture, testing, and test rigs. Instrument and analyse system performance. Develop system tests and integration tests, testing functionality on simulators and hardware platforms. Evaluate alternative concepts, designs, and components. Participate in team-wide architecture reviews. As a member of the Electronics Engineering team, you will share responsibility for both implementation and design of new projects, as well as updates, improvements, and maintenance of existing systems. You will have the opportunity to contribute to cross-team planning efforts, and to shape the design of our platforms now and in the future. Requirements 5+ years of proven, hands-on experience in hardware and system design. Experience with high power, medium voltage power electronics, machines, and drives. Experience following design life cycle management. Experience in complete board design with 32-bit micro-controllers (STM32 preferred). Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred. Experience with functional safety systems. Board bring-up, verification and testing of designs, all the way to complete implementation into devices. Ability to perform evaluations of alternative components, providing data to allow for decisions supporting product improvements. Ability to multitask in a fast-moving environment, embrace challenge, and work outside of your comfort zone. Excellent communication, collaboration, and teamwork skills. Excellent hardware debugging skills and using standard lab equipment. Experience working in cross-functional environments with software, mechanical, and integration engineering teams. Creativity in finding solutions, a good understanding of technology, and a desire to learn new things. Demonstrated experience in taking ownership of your work from prototyping to manufacturing. Excellent ability to work independently and convey complex technical requirements into a product quickly. Able to work under pressure and tight deadlines. Additionally, any experience in any of the following areas would be a great benefit: Soldering experience using various techniques (soldering iron, hot air, and oven reflow). Previous experience with Electronics Development for industrial and robotic systems. Exposure to high-volume Electronics manufacturing practices. Experience writing low-level firmware in C/C++. Occasionally you may need to assist with the following: Demo development and testing. Mentoring and assisting with supervision of interns. Attending trade shows and conferences. Why join our client? The incredible opportunity to join an early-stage company and work towards your future goals. Share options. Salary Sacrifice Life Insurance(3 times) L&D budget for career development Pension: 4+% employee with the option to opt into salary exchange, 5% employer. Attractive employee wellness benefits. Personal development budget. 25 holiday days per year, plus statutory holidays. Flexible working, hybrid team. Fun team events on and off site, snacks of all kinds in the office.
May 04, 2024
Full time
About Our Client Our autonomous data capturing technology and insights generation capabilities help to measure, track, and find goods across warehouses in real time while building the ultimate digital twin of facilities. Join us at a very exciting time of growth as we're significantly ramping up all areas of the business to lead the way in logistics data globally, backed by some of Europe's best VCs and driven by passion, curiosity, and teamwork. We value humility and we're as interested in your character as we are in your talent. Please apply, even if you feel you only meet part of our listed criteria. Diversity drives innovation, and we offer an international and friendly work environment with an energetic company culture. Senior Electronics Engineer As a Senior Electronics Engineer, you will play a key role in designing and building our electronics platform that supports our autonomous robotics system. You will work with our Mechanical, Software, and Embedded teams to design, implement, and test the electronics that power our robots to provide the features, performance, and safety the platform requires. Your Impact Own the design and implementation of next-generation electronic sensor systems, controllers, and power modules. Take ownership of electronics architecture, testing, and test rigs. Instrument and analyse system performance. Develop system tests and integration tests, testing functionality on simulators and hardware platforms. Evaluate alternative concepts, designs, and components. Participate in team-wide architecture reviews. As a member of the Electronics Engineering team, you will share responsibility for both implementation and design of new projects, as well as updates, improvements, and maintenance of existing systems. You will have the opportunity to contribute to cross-team planning efforts, and to shape the design of our platforms now and in the future. Requirements 5+ years of proven, hands-on experience in hardware and system design. Experience with high power, medium voltage power electronics, machines, and drives. Experience following design life cycle management. Experience in complete board design with 32-bit micro-controllers (STM32 preferred). Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred. Experience with functional safety systems. Board bring-up, verification and testing of designs, all the way to complete implementation into devices. Ability to perform evaluations of alternative components, providing data to allow for decisions supporting product improvements. Ability to multitask in a fast-moving environment, embrace challenge, and work outside of your comfort zone. Excellent communication, collaboration, and teamwork skills. Excellent hardware debugging skills and using standard lab equipment. Experience working in cross-functional environments with software, mechanical, and integration engineering teams. Creativity in finding solutions, a good understanding of technology, and a desire to learn new things. Demonstrated experience in taking ownership of your work from prototyping to manufacturing. Excellent ability to work independently and convey complex technical requirements into a product quickly. Able to work under pressure and tight deadlines. Additionally, any experience in any of the following areas would be a great benefit: Soldering experience using various techniques (soldering iron, hot air, and oven reflow). Previous experience with Electronics Development for industrial and robotic systems. Exposure to high-volume Electronics manufacturing practices. Experience writing low-level firmware in C/C++. Occasionally you may need to assist with the following: Demo development and testing. Mentoring and assisting with supervision of interns. Attending trade shows and conferences. Why join our client? The incredible opportunity to join an early-stage company and work towards your future goals. Share options. Salary Sacrifice Life Insurance(3 times) L&D budget for career development Pension: 4+% employee with the option to opt into salary exchange, 5% employer. Attractive employee wellness benefits. Personal development budget. 25 holiday days per year, plus statutory holidays. Flexible working, hybrid team. Fun team events on and off site, snacks of all kinds in the office.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Locations - Reading, Swindon (M4 Corridor) Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
May 04, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Locations - Reading, Swindon (M4 Corridor) Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,900 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Tuesday -Saturday Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Role: Head of engineering/product lead Salary: £70,000 - £75,000 approximately really depends on skills and experience Location: Dundee Onsite 3x days per week My client is looking for a head of engineering product lead. Will be responsible for taking small physical products to market in the electronics and mechanical sector in a harsh environment. You will need to deal with the manufactures and understand how the physical product is manufactured and understand the quality standards. If you have gone to field with a product this will be a huge advantage as you may need to re-engineer a product and complete root cause analysis and DFMA. Role description and purpose The Head of Product is a critical role. Its purpose is to deliver innovation pipeline; organising, supporting, mentoring and managing a group of dedicated professionals to deliver a series of new propositions that will contribute towards our ambition to deliver integrated solutions that support smart farming and processing operations. We have several propositions in development including a biomass camera, a sea-lice treatment system, a seal detection camera, a novel pump and a waterjet bleeder. These propositions are at various stages of development but share the need to be driven through development to deliver manufacturing ready outcomes. Delivery of these outcomes is critical to our ambition to become a leading provider of value-adding solutions to customers throughout the world. The range of activity to be overseen by the Head of Product extends from verification of market need, through prototyping, to the development and documentation of specifications for manufacturing. Development leadership requires an understanding of the constituent elements of each proposition, including software, electronics, mechanical and power engineering. As well as a capable in-house development team, we have an established network of partners within its supply chain that can be tapped to introduce additional capability and capacity. This role will require significant contact with all members of the senior management team and reports to the Chief Operating Officer. Responsibilities of the role Provide leadership to the company's product team and to those within the supply chain involved in supporting the development of products Support the continuous development of the product team, ensuring that skills and capacity are aligned with the delivery objectives from this business unit Plan for and implement a process that achieves the transition of knowledge and capability from the more experienced members of the product team to new employees Actively manage the relationship between and our 3rd party manufacturing units, to ensure quality and timely delivery. Focusing on the documentation, design artifacts and quality reporting. Liaise with marketing department (and third parties as required) to gather intelligence on customer requirements and case studies Own responsibility for delivering next generation propositions Support the transfer of new proposition designs to manufacturing business unit, to include the provision of all documentation required to build and safely operate the equipment Schedule and define draft budgets for the activities of the product team Maintain an up to date understanding of the regulatory environments within which operates and ensure that new product designs do not breach regulations Promote a culture of health and safety Define OKRs relevant to the role, agree goals with the COO, and deliver Provide periodical reports to the COO on progress against OKRs Experience & Skills: Relevant degree with an engineering background and prior experience of owning the delivery of new value propositions within a fast moving SME environment Ability to effectively work on the delivery of multiple new propositions simultaneously Ability to apply business knowledge to real-world scenarios Leadership capability and effective people manager Planning and management skills Strategic thinker capable of making a meaningful contribution to the direction of the business Problem solving skills and analytical mindset Understanding of budgeting process and financial management Excellent communication skills Pro-active and self-starting Ability to assimilate detailed product knowledge and to disseminate this within the team and to third party supporters as required Presentation capability: written and verbal Technical competencies: Project & task management People management Facilitation & change management Strategic leadership How To Apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
May 03, 2024
Full time
Role: Head of engineering/product lead Salary: £70,000 - £75,000 approximately really depends on skills and experience Location: Dundee Onsite 3x days per week My client is looking for a head of engineering product lead. Will be responsible for taking small physical products to market in the electronics and mechanical sector in a harsh environment. You will need to deal with the manufactures and understand how the physical product is manufactured and understand the quality standards. If you have gone to field with a product this will be a huge advantage as you may need to re-engineer a product and complete root cause analysis and DFMA. Role description and purpose The Head of Product is a critical role. Its purpose is to deliver innovation pipeline; organising, supporting, mentoring and managing a group of dedicated professionals to deliver a series of new propositions that will contribute towards our ambition to deliver integrated solutions that support smart farming and processing operations. We have several propositions in development including a biomass camera, a sea-lice treatment system, a seal detection camera, a novel pump and a waterjet bleeder. These propositions are at various stages of development but share the need to be driven through development to deliver manufacturing ready outcomes. Delivery of these outcomes is critical to our ambition to become a leading provider of value-adding solutions to customers throughout the world. The range of activity to be overseen by the Head of Product extends from verification of market need, through prototyping, to the development and documentation of specifications for manufacturing. Development leadership requires an understanding of the constituent elements of each proposition, including software, electronics, mechanical and power engineering. As well as a capable in-house development team, we have an established network of partners within its supply chain that can be tapped to introduce additional capability and capacity. This role will require significant contact with all members of the senior management team and reports to the Chief Operating Officer. Responsibilities of the role Provide leadership to the company's product team and to those within the supply chain involved in supporting the development of products Support the continuous development of the product team, ensuring that skills and capacity are aligned with the delivery objectives from this business unit Plan for and implement a process that achieves the transition of knowledge and capability from the more experienced members of the product team to new employees Actively manage the relationship between and our 3rd party manufacturing units, to ensure quality and timely delivery. Focusing on the documentation, design artifacts and quality reporting. Liaise with marketing department (and third parties as required) to gather intelligence on customer requirements and case studies Own responsibility for delivering next generation propositions Support the transfer of new proposition designs to manufacturing business unit, to include the provision of all documentation required to build and safely operate the equipment Schedule and define draft budgets for the activities of the product team Maintain an up to date understanding of the regulatory environments within which operates and ensure that new product designs do not breach regulations Promote a culture of health and safety Define OKRs relevant to the role, agree goals with the COO, and deliver Provide periodical reports to the COO on progress against OKRs Experience & Skills: Relevant degree with an engineering background and prior experience of owning the delivery of new value propositions within a fast moving SME environment Ability to effectively work on the delivery of multiple new propositions simultaneously Ability to apply business knowledge to real-world scenarios Leadership capability and effective people manager Planning and management skills Strategic thinker capable of making a meaningful contribution to the direction of the business Problem solving skills and analytical mindset Understanding of budgeting process and financial management Excellent communication skills Pro-active and self-starting Ability to assimilate detailed product knowledge and to disseminate this within the team and to third party supporters as required Presentation capability: written and verbal Technical competencies: Project & task management People management Facilitation & change management Strategic leadership How To Apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Job Title: Field Service Engineer Location: Northern Ireland - Remote Pay Range/details: £40,000 to £45,000 per annum Contract Type: Permanent Omega Resource are now supporting a well-known and globally recognised specialist within the industrial print industry, with a 170+ year history in combining innovation and tradition across the industry. With a rich history, and a well-respected brand, they offer a fantastic and rewarding position for a Field Service Engineer to join the team. The Field Service Engineer will be a remote based position, covering the whole of Northern Ireland, responsible for providing on site and remote support for the full range of products, as well as supporting some remote support duties when needed. Key Responsibilities Field Service Engineer Responsible for the Installation, Investigation, and Repair of machine faults across both Electrical and Mechanical nature. Plan and prepare the correct resources needed for repairs in a time effective way. Provide Help desk/Remote support when required and feasible. Observe and aware of Health & Safety and Working Time regulations. Communicate any escalations and/or delays to relevant colleagues/managers, and report documentation where needed. Visiting and commutating with end-customers on-site, identifying needs and correct parts. Qualifications & Requirements Field Service Engineer Relevant experience of a similar role within the Industrial Print industry would be beneficial, but experience working on commercial equipment in production environments is required as minimum. A recognised qualification (BTEC or City & Guilds) within Electrical and Mechanical Engineering. Excellent communication skills both verbally and written, and able to articulate technical issues to customers. Able to work towards and maintain service targets and KPIs. What we can offer Field Service Engineer Overtime available, with an OTE of 20%/30% available. A company vehicle, mobile phone & laptop. 25 days annual leave, increasing with ongoing service. Cycle to work scheme. 10% pension (5%/5%) increasing with ongoing service. A rewarding career with a well-respected business, ongoing career development and support. For more information on this role, please contact Michael Farrell on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a Field Service Engineer, Maintenance Engineer, Field Engineer, Mechanical Engineer or Electrical Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment business specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
May 03, 2024
Full time
Job Title: Field Service Engineer Location: Northern Ireland - Remote Pay Range/details: £40,000 to £45,000 per annum Contract Type: Permanent Omega Resource are now supporting a well-known and globally recognised specialist within the industrial print industry, with a 170+ year history in combining innovation and tradition across the industry. With a rich history, and a well-respected brand, they offer a fantastic and rewarding position for a Field Service Engineer to join the team. The Field Service Engineer will be a remote based position, covering the whole of Northern Ireland, responsible for providing on site and remote support for the full range of products, as well as supporting some remote support duties when needed. Key Responsibilities Field Service Engineer Responsible for the Installation, Investigation, and Repair of machine faults across both Electrical and Mechanical nature. Plan and prepare the correct resources needed for repairs in a time effective way. Provide Help desk/Remote support when required and feasible. Observe and aware of Health & Safety and Working Time regulations. Communicate any escalations and/or delays to relevant colleagues/managers, and report documentation where needed. Visiting and commutating with end-customers on-site, identifying needs and correct parts. Qualifications & Requirements Field Service Engineer Relevant experience of a similar role within the Industrial Print industry would be beneficial, but experience working on commercial equipment in production environments is required as minimum. A recognised qualification (BTEC or City & Guilds) within Electrical and Mechanical Engineering. Excellent communication skills both verbally and written, and able to articulate technical issues to customers. Able to work towards and maintain service targets and KPIs. What we can offer Field Service Engineer Overtime available, with an OTE of 20%/30% available. A company vehicle, mobile phone & laptop. 25 days annual leave, increasing with ongoing service. Cycle to work scheme. 10% pension (5%/5%) increasing with ongoing service. A rewarding career with a well-respected business, ongoing career development and support. For more information on this role, please contact Michael Farrell on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a Field Service Engineer, Maintenance Engineer, Field Engineer, Mechanical Engineer or Electrical Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment business specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
May 03, 2024
Full time
Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Our client, an iconic luxury British sports car manufacturer is currently hiring a System Architect/Feature Owner Powertrain. The successful candidate will lead the systems development and feature delivery of distributed functions within the ICE Powertrain domain. The System Architect/Feature Owner Powertrain will: Drive issue resolution and, where required, mitigation plans. Support SOTIF (ISO21448) and Cyber Security (UNECE R155) aspects of the feature delivery. Identify diagnostic requirements for the systems. Analyse and organise stakeholder requirements. Allocate system requirements to elements of the system and defining interfaces. The System Architect/Feature Owner Powertrain will have: Technical engineering background and a knowledge of using calculation and analysis to drive design. Appropriate / related engineering degree. Experience of Autosar SW architecture. Advanced knowledge of DBC and FIBEX Automotive standards for serial data/communication level. Experience of managing technical delivery through Tier 1 suppliers. Experience of more than one of the following commodities is preferred: infotainment, connected services, switchgear, lighting, body electronics, power management, EDS, ADAS, powertrain (electrified), chassis. If this sounds like a great opportunity for you, simply apply online! Submit a copy of your up-to-date CV and a member of the EVera team will be in touch!
May 03, 2024
Full time
Our client, an iconic luxury British sports car manufacturer is currently hiring a System Architect/Feature Owner Powertrain. The successful candidate will lead the systems development and feature delivery of distributed functions within the ICE Powertrain domain. The System Architect/Feature Owner Powertrain will: Drive issue resolution and, where required, mitigation plans. Support SOTIF (ISO21448) and Cyber Security (UNECE R155) aspects of the feature delivery. Identify diagnostic requirements for the systems. Analyse and organise stakeholder requirements. Allocate system requirements to elements of the system and defining interfaces. The System Architect/Feature Owner Powertrain will have: Technical engineering background and a knowledge of using calculation and analysis to drive design. Appropriate / related engineering degree. Experience of Autosar SW architecture. Advanced knowledge of DBC and FIBEX Automotive standards for serial data/communication level. Experience of managing technical delivery through Tier 1 suppliers. Experience of more than one of the following commodities is preferred: infotainment, connected services, switchgear, lighting, body electronics, power management, EDS, ADAS, powertrain (electrified), chassis. If this sounds like a great opportunity for you, simply apply online! Submit a copy of your up-to-date CV and a member of the EVera team will be in touch!
About Our Client Our autonomous data capturing technology and insights generation capabilities help to measure, track, and find goods across warehouses in real time, while building the ultimate digital twin of facilities. Join us at a very exciting time of growth as we're significantly ramping up all areas of the business to lead the way in logistics data globally, backed by some of Europe's best VCs and driven by passion, curiosity, and teamwork. We value humility and we're as interested in your character as we are in your talent. Please apply, even if you feel you only meet part of our listed criteria. Diversity drives innovation, and we offer an international and friendly work environment with an energetic company culture. Your Impact Own the design and implementation of next-generation electronic sensor systems, controllers, and power modules Assist in taking ownership of electronics architecture, testing, and test rigs Instrument and analyse system performance. Develop system tests and integration tests, testing functionality on simulators and hardware platforms Evaluate alternative concepts, designs, and components Participate in team-wide architecture reviews As an Electronics Engineer, you will play a key role in designing and building our electronics platform that supports our autonomous robotics system. You will work with our Mechanical, Software, and Embedded teams to design, implement, and test the electronics that power our robots to provide the features, performance, and safety the platform requires. Requirements 3+ years of proven, hands-on experience in hardware and system design Experience with high power, medium voltage power electronics, machines, and drives Experience following design life cycle management Experience in complete board design with 32-bit microcontrollers (STM32 preferred) Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred Experience with functional safety systems Board bring-up, verification, and testing of designs, all the way to complete implementation into devices Ability to perform evaluations of alternative components, providing data to allow for decisions supporting product improvements Ability to multitask in a fast-moving environment, embrace challenge, and work outside of your comfort zone Excellent communication, collaboration, and teamwork skills Excellent hardware debugging skills and using standard lab equipment Experience working in cross-functional environments with software, mechanical, and integration engineering teams Creativity in finding solutions, good understanding of technology, and a desire to learn new things Demonstrated experience in taking ownership of your work from prototyping to manufacturing Excellent ability to work independently and convey complex technical requirements into a product quickly Able to work under pressure and tight deadlines Additionally, any experience in any of the following areas would be a great benefit: Soldering experience using various techniques (soldering iron, hot air, and oven reflow) Previous experience with Electronics Development for industrial and robotic systems Exposure to high-volume Electronics manufacturing practices Experience writing low-level firmware in C/C++ Occasionally, you may need to assist with the following: Demo development and testing Mentoring and assisting with supervision of interns Attending trade shows and conferences Why join Our Client The incredible opportunity to join an early-stage company and work towards your future goals Share options Salary Sacrifice Life Insurance (3 times) Pension: 4+% employee with the option to opt into salary exchange, 5% employer Attractive employee wellness benefits Personal development budget 25 holiday days per year, plus statutory holidays Flexible working, hybrid team Fun team events on and off site, snacks of all kinds in the office Apply now to join our client and be a part of revolutionising the logistics industry!
May 03, 2024
Full time
About Our Client Our autonomous data capturing technology and insights generation capabilities help to measure, track, and find goods across warehouses in real time, while building the ultimate digital twin of facilities. Join us at a very exciting time of growth as we're significantly ramping up all areas of the business to lead the way in logistics data globally, backed by some of Europe's best VCs and driven by passion, curiosity, and teamwork. We value humility and we're as interested in your character as we are in your talent. Please apply, even if you feel you only meet part of our listed criteria. Diversity drives innovation, and we offer an international and friendly work environment with an energetic company culture. Your Impact Own the design and implementation of next-generation electronic sensor systems, controllers, and power modules Assist in taking ownership of electronics architecture, testing, and test rigs Instrument and analyse system performance. Develop system tests and integration tests, testing functionality on simulators and hardware platforms Evaluate alternative concepts, designs, and components Participate in team-wide architecture reviews As an Electronics Engineer, you will play a key role in designing and building our electronics platform that supports our autonomous robotics system. You will work with our Mechanical, Software, and Embedded teams to design, implement, and test the electronics that power our robots to provide the features, performance, and safety the platform requires. Requirements 3+ years of proven, hands-on experience in hardware and system design Experience with high power, medium voltage power electronics, machines, and drives Experience following design life cycle management Experience in complete board design with 32-bit microcontrollers (STM32 preferred) Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred Experience with functional safety systems Board bring-up, verification, and testing of designs, all the way to complete implementation into devices Ability to perform evaluations of alternative components, providing data to allow for decisions supporting product improvements Ability to multitask in a fast-moving environment, embrace challenge, and work outside of your comfort zone Excellent communication, collaboration, and teamwork skills Excellent hardware debugging skills and using standard lab equipment Experience working in cross-functional environments with software, mechanical, and integration engineering teams Creativity in finding solutions, good understanding of technology, and a desire to learn new things Demonstrated experience in taking ownership of your work from prototyping to manufacturing Excellent ability to work independently and convey complex technical requirements into a product quickly Able to work under pressure and tight deadlines Additionally, any experience in any of the following areas would be a great benefit: Soldering experience using various techniques (soldering iron, hot air, and oven reflow) Previous experience with Electronics Development for industrial and robotic systems Exposure to high-volume Electronics manufacturing practices Experience writing low-level firmware in C/C++ Occasionally, you may need to assist with the following: Demo development and testing Mentoring and assisting with supervision of interns Attending trade shows and conferences Why join Our Client The incredible opportunity to join an early-stage company and work towards your future goals Share options Salary Sacrifice Life Insurance (3 times) Pension: 4+% employee with the option to opt into salary exchange, 5% employer Attractive employee wellness benefits Personal development budget 25 holiday days per year, plus statutory holidays Flexible working, hybrid team Fun team events on and off site, snacks of all kinds in the office Apply now to join our client and be a part of revolutionising the logistics industry!