Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs. Key Responsibilities Support in test activities across all hot fire and environmental test facilities. Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety. Develop test, maintenance, and setup procedures for all test activities. Requirements Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the
May 01, 2024
Full time
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs. Key Responsibilities Support in test activities across all hot fire and environmental test facilities. Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety. Develop test, maintenance, and setup procedures for all test activities. Requirements Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the
Ernest Gordon Recruitment Limited
Leeds, Yorkshire
Field Service Engineer (LOLER / Healthcare) £30,000- £33,000 (OTE £40,000+) + Training + Overtime + Van + 33 Days Holiday + Benefits Leeds Are you a Service Engineer or similar from a Healthcare / LOLER inspection background looking to join a market-leading medical equipment manufacturer who offer a varied and autonomous role covering a regional patch where you will receive ongoing specialist training, the ability to significantly increase your earnings through overtime and have a clear progression pathway to Senior positions? This well-established medical manufacturer provide LOLER testing, electrical and mechanical care for medical devices including patient hoists, beds and pressure equipment nationwide. They have built a broad client base with record breaking turnover month on month in 2023, due to increased demand they are looking to grow their team of tight-knit engineers across the UK. This varied role will see you covering a regional patch, conducting passive and reactive servicing of medical mobility equipment for a range of care homes and other medical clients. You will work autonomously with your own company vehicle and will receive door-to-door pay for any travel undertaken and full manufacturer's training. This role would suit a Service Engineer with a background in the Healthcare Industry or LOLER inspections looking to make an impact within a well-established and growing company who provide an essential service across the UK, you will be given specific product training and have the ability to substantially boost your earnings with overtime and on-call rota. The Role: Servicing, Maintaining and Installing Medical Equipment Regional patch - door to door pay Unlimited Overtime and On-Call Rota Company Van including personal use 33 Days Holiday including Bank Holidays The Person: Service Engineer or similar Healthcare / LOLER background Full UK Driver's License- happy to cover a regional patch Reference: BBBH11677M Key Words: Service, Medical, Hoist, Beds, Mattresses, Hoists, Patient Handling, Healthcare, Engineer, Field, Maintenance, Servicing, Leeds, Rotherham, Doncaster, Engineering, Mechanical, Electrical, LOLER If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 01, 2024
Full time
Field Service Engineer (LOLER / Healthcare) £30,000- £33,000 (OTE £40,000+) + Training + Overtime + Van + 33 Days Holiday + Benefits Leeds Are you a Service Engineer or similar from a Healthcare / LOLER inspection background looking to join a market-leading medical equipment manufacturer who offer a varied and autonomous role covering a regional patch where you will receive ongoing specialist training, the ability to significantly increase your earnings through overtime and have a clear progression pathway to Senior positions? This well-established medical manufacturer provide LOLER testing, electrical and mechanical care for medical devices including patient hoists, beds and pressure equipment nationwide. They have built a broad client base with record breaking turnover month on month in 2023, due to increased demand they are looking to grow their team of tight-knit engineers across the UK. This varied role will see you covering a regional patch, conducting passive and reactive servicing of medical mobility equipment for a range of care homes and other medical clients. You will work autonomously with your own company vehicle and will receive door-to-door pay for any travel undertaken and full manufacturer's training. This role would suit a Service Engineer with a background in the Healthcare Industry or LOLER inspections looking to make an impact within a well-established and growing company who provide an essential service across the UK, you will be given specific product training and have the ability to substantially boost your earnings with overtime and on-call rota. The Role: Servicing, Maintaining and Installing Medical Equipment Regional patch - door to door pay Unlimited Overtime and On-Call Rota Company Van including personal use 33 Days Holiday including Bank Holidays The Person: Service Engineer or similar Healthcare / LOLER background Full UK Driver's License- happy to cover a regional patch Reference: BBBH11677M Key Words: Service, Medical, Hoist, Beds, Mattresses, Hoists, Patient Handling, Healthcare, Engineer, Field, Maintenance, Servicing, Leeds, Rotherham, Doncaster, Engineering, Mechanical, Electrical, LOLER If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Are you an experienced Integration Tester with a methodical problem-solving mindset, with proven hands-on experience testing electrical products? Do you have experience planning, prioritising, and managing your workload with the expertise to identify the work required and the most appropriate way to deliver it? How does working on a new next generation product within navigation systems that is being released later this year sound? My client are not just any company - based out of Bath they are pioneers in their field delivering cutting-edge products and solutions to both their commercial and enterprise clients across the globe producing products and systems that significantly enhance, security, safety and environment protection and sustainability. Role: Senior Tester Salary: £55,000 negotiable Location: remote - On-site visits every 8 weeks Role Overview They are currently looking for a Senior Integration Test Engineer to join their team based out of their Bath office, The ideal candidate will be someone who has been involved in embedded Software / Systems in the past with experience of integration testing, and able to test features as they are being put together and produced. This person will potentially advice on how the team grow and develop and look at building the team. You'll demonstrate a positive, proactive, enthusiastic & self-motivated approach with a genuine passion for delivering 'High Quality testing and solutions and play an active role in a collaborative Team with Demonstrable experience working with structured testing. You'll be able to understand complex issues, simplify them and communicate them effectively and Analyse Test project requirements, specifications & supporting materials. You will pro-actively identify test conditions and acceptance criteria to Validate ' How to use ' the product, maintaining focus on the User Experience and Identify and deliver pre-compliance testing for all relevant Certification Standards before the products are sent to Test Houses, as well as produce and present Test Plans, Test Scenarios, Test Cases, Test Schedules, and Test Reports. You'll be responsible for setting up test environments with required connectivity and use various tools and tracking software to Validate the results, and record and evaluate accordingly, raising bugs for failed tests and provide feedback to the Development teams, and manage the bug process, retest defect fixes, and evaluate, support root cause analysis and resolution of issues whilst defining and delivering suitable regression test suites, reporting on test progress. Liaise with 3rd party companies and Test Houses for external testing, monitoring their test scope, progress, and progress reporting. Identify and communicate Risks, Issues and Dependencies, following them to resolution, pro-actively collaborate to improve the processes & procedures for the Product Assurance Team. The Skills bit. Keen eye for detail and an analytical mindset. Strong written and verbal communication skills. Great troubleshooting skills. Test Design, Planning & Estimation experience. Familiarity with various testing techniques (inc. SIT, UAT and Regression). Handling & testing electronics and mechanical components. Test Management Tool experience - loading & running tests, raising & retesting defects etc. in i.e. JIRA, Zephyr, SpiraTest or HP QC/ALM. Requirements Traceability. Android & iOS testing on mobiles, tablets and laptops/PC's. Proficient in the use of Windows operating system and Microsoft Office tools. Good knowledge of the Software Delivery Lifecycle (SDLC). Familiar with software version control (i.e. SVN, BitBucket etc.). ISEB/ISTQB certified or equivalent (desirable). If interested, please send across an updated CV. Please note we cannot offer sponsorship.
May 01, 2024
Full time
Are you an experienced Integration Tester with a methodical problem-solving mindset, with proven hands-on experience testing electrical products? Do you have experience planning, prioritising, and managing your workload with the expertise to identify the work required and the most appropriate way to deliver it? How does working on a new next generation product within navigation systems that is being released later this year sound? My client are not just any company - based out of Bath they are pioneers in their field delivering cutting-edge products and solutions to both their commercial and enterprise clients across the globe producing products and systems that significantly enhance, security, safety and environment protection and sustainability. Role: Senior Tester Salary: £55,000 negotiable Location: remote - On-site visits every 8 weeks Role Overview They are currently looking for a Senior Integration Test Engineer to join their team based out of their Bath office, The ideal candidate will be someone who has been involved in embedded Software / Systems in the past with experience of integration testing, and able to test features as they are being put together and produced. This person will potentially advice on how the team grow and develop and look at building the team. You'll demonstrate a positive, proactive, enthusiastic & self-motivated approach with a genuine passion for delivering 'High Quality testing and solutions and play an active role in a collaborative Team with Demonstrable experience working with structured testing. You'll be able to understand complex issues, simplify them and communicate them effectively and Analyse Test project requirements, specifications & supporting materials. You will pro-actively identify test conditions and acceptance criteria to Validate ' How to use ' the product, maintaining focus on the User Experience and Identify and deliver pre-compliance testing for all relevant Certification Standards before the products are sent to Test Houses, as well as produce and present Test Plans, Test Scenarios, Test Cases, Test Schedules, and Test Reports. You'll be responsible for setting up test environments with required connectivity and use various tools and tracking software to Validate the results, and record and evaluate accordingly, raising bugs for failed tests and provide feedback to the Development teams, and manage the bug process, retest defect fixes, and evaluate, support root cause analysis and resolution of issues whilst defining and delivering suitable regression test suites, reporting on test progress. Liaise with 3rd party companies and Test Houses for external testing, monitoring their test scope, progress, and progress reporting. Identify and communicate Risks, Issues and Dependencies, following them to resolution, pro-actively collaborate to improve the processes & procedures for the Product Assurance Team. The Skills bit. Keen eye for detail and an analytical mindset. Strong written and verbal communication skills. Great troubleshooting skills. Test Design, Planning & Estimation experience. Familiarity with various testing techniques (inc. SIT, UAT and Regression). Handling & testing electronics and mechanical components. Test Management Tool experience - loading & running tests, raising & retesting defects etc. in i.e. JIRA, Zephyr, SpiraTest or HP QC/ALM. Requirements Traceability. Android & iOS testing on mobiles, tablets and laptops/PC's. Proficient in the use of Windows operating system and Microsoft Office tools. Good knowledge of the Software Delivery Lifecycle (SDLC). Familiar with software version control (i.e. SVN, BitBucket etc.). ISEB/ISTQB certified or equivalent (desirable). If interested, please send across an updated CV. Please note we cannot offer sponsorship.
Forklift Field Service Engineer Location:Stacatruc HQ, South Team (M4 Corridor) Reports to: Operations Service Manager Do you fancy a change? Are you hands on and love life out on the open road? Do you have experience in mechanical engineering or any basic electrical knowledge and have helped to lead a team? Great! Because we are ! Are you good at planning? Can we utilise your organisational skills? Do you take pride in your work? We are recruiting for a Mechanical Handling Field Service Engineer to join our South Field Service Engineers. The position is full time, and we would love you to work within our Service Department to maintain, repair, service and modifya range of other material handling equipment. Because we are independent every challenge is new and different, and we would really welcome your help. Skills and Experience You will have worked with material handling products or hold a senior engineering position and are looking for the next step to further your career; however, we are open to considering candidates from other backgrounds such as: Automotive, Roadside recovery, Agricultural, REME, Construction Equipment, PSV, HGV, LGV or Plant. To service, maintain, overhaul, fault find and resolve on a range of material handling products. Full UK driving license. Respond to breakdowns. We pride ourselves on our customer service. Youre the face of our company we are looking for someone that can build a good rapport & deal promptly with customer downtime helping to keep their business moving! Shows initiative and can help to support and direct others when they need it as well as accomplish their own tasks. Achieve agreed targets, i.e. response time. Completion of documentation to company standards Liaise with our parts team to ensure appropriate stock levels are held on the company vehicle. We would love your help with working on mobile machinery (brakes, steering, wheels, lift chains etc.) Do you have experience in Electrical drive and control systems, Diesel and LPG engines and common drive-trains? - Hydraulics? Competitive salary; an attractive company pension & healthcare cover. We have a great welcoming team which are spread across the nation. Head office is based in Berkshire, with depots in the Midlands, Greater Manchester, East Anglia. We will provide you with industry leading technical training to ensure you have the knowledge & all the tools to do your job including van with fuel card! As Stacatruc continues to grow, we are a diverse and forward-thinking employer, we embed the principles of equality, diversity, and inclusion into everything we do. That includes our staff, customers, suppliers and our local community. Were committed to the well-being of all our staff and to the sustainability of our environment. We are looking for the right person that takes their own initiative in this very important position to join us in our progression forward. If you are looking for a new challenge, have the drive to really build something to be proud of and grow this could be just the job for you Do you fit these criterias? We would love to hear from YOU! We would require your full CV before interviewing. JBRP1_UKTJ
May 01, 2024
Full time
Forklift Field Service Engineer Location:Stacatruc HQ, South Team (M4 Corridor) Reports to: Operations Service Manager Do you fancy a change? Are you hands on and love life out on the open road? Do you have experience in mechanical engineering or any basic electrical knowledge and have helped to lead a team? Great! Because we are ! Are you good at planning? Can we utilise your organisational skills? Do you take pride in your work? We are recruiting for a Mechanical Handling Field Service Engineer to join our South Field Service Engineers. The position is full time, and we would love you to work within our Service Department to maintain, repair, service and modifya range of other material handling equipment. Because we are independent every challenge is new and different, and we would really welcome your help. Skills and Experience You will have worked with material handling products or hold a senior engineering position and are looking for the next step to further your career; however, we are open to considering candidates from other backgrounds such as: Automotive, Roadside recovery, Agricultural, REME, Construction Equipment, PSV, HGV, LGV or Plant. To service, maintain, overhaul, fault find and resolve on a range of material handling products. Full UK driving license. Respond to breakdowns. We pride ourselves on our customer service. Youre the face of our company we are looking for someone that can build a good rapport & deal promptly with customer downtime helping to keep their business moving! Shows initiative and can help to support and direct others when they need it as well as accomplish their own tasks. Achieve agreed targets, i.e. response time. Completion of documentation to company standards Liaise with our parts team to ensure appropriate stock levels are held on the company vehicle. We would love your help with working on mobile machinery (brakes, steering, wheels, lift chains etc.) Do you have experience in Electrical drive and control systems, Diesel and LPG engines and common drive-trains? - Hydraulics? Competitive salary; an attractive company pension & healthcare cover. We have a great welcoming team which are spread across the nation. Head office is based in Berkshire, with depots in the Midlands, Greater Manchester, East Anglia. We will provide you with industry leading technical training to ensure you have the knowledge & all the tools to do your job including van with fuel card! As Stacatruc continues to grow, we are a diverse and forward-thinking employer, we embed the principles of equality, diversity, and inclusion into everything we do. That includes our staff, customers, suppliers and our local community. Were committed to the well-being of all our staff and to the sustainability of our environment. We are looking for the right person that takes their own initiative in this very important position to join us in our progression forward. If you are looking for a new challenge, have the drive to really build something to be proud of and grow this could be just the job for you Do you fit these criterias? We would love to hear from YOU! We would require your full CV before interviewing. JBRP1_UKTJ
I am looking for a Senior Automation Engineer to join my client who is a Bristol-based biotech developing next generation IVD's for bloodstream infections. This role would be based full-time on-site in Bristol and are looking for someone who has experience with automating fluid control or liquid handling. What you'll be doing? You will be playing a key role in the design, testing and manufacture of their automated system focused on precision fluid control for volume applications. You will also be automating their high-throughput operation of sample processing and working closely with both engineers and biologists at the business. What they are looking for? They are looking for someone who has extensive knowledge of fluid control systems and is a strong mechanical engineer with experience of automation, AutoCAD, SOLIDWORKS and manufacturing. They are ideally looking for someone who has worked in the field of IVD devices or medical devices. What you'll get in return for your experience? The salary on this role is up to £60,000 based in Bristol. What's next? If this role sounds like something you would be interested in then please apply using the link.
May 01, 2024
Full time
I am looking for a Senior Automation Engineer to join my client who is a Bristol-based biotech developing next generation IVD's for bloodstream infections. This role would be based full-time on-site in Bristol and are looking for someone who has experience with automating fluid control or liquid handling. What you'll be doing? You will be playing a key role in the design, testing and manufacture of their automated system focused on precision fluid control for volume applications. You will also be automating their high-throughput operation of sample processing and working closely with both engineers and biologists at the business. What they are looking for? They are looking for someone who has extensive knowledge of fluid control systems and is a strong mechanical engineer with experience of automation, AutoCAD, SOLIDWORKS and manufacturing. They are ideally looking for someone who has worked in the field of IVD devices or medical devices. What you'll get in return for your experience? The salary on this role is up to £60,000 based in Bristol. What's next? If this role sounds like something you would be interested in then please apply using the link.
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities The Quality Manager will provide support to the manufacturing and service business units by implementing Oceaneering's Quality Management System (QMS) & related tools /processes to accelerate business results, as well as identify, measure and improve key performance indicators (KPIs) such as Cost of Poor Quality (COPQ) and on time delivery (OTD). Functions ESSENTIAL • Effectively manages a team of specialists and may manage support teams. • Applies advanced knowledge and skills of specialized area and demonstrates broad understanding of the • field. • Engaging with Matrix Manager as appropriate • Executes short-term operational activities and innovation for a specific work area through process • implementation. • Manages problem-solving within own work team and oversees solution implementation. • Setup, maintain, and revise as necessary the internal & external customer feedback collection process. • Develop a common understanding of alignment and direction regarding the processes that are business unit specific vs. the processes and systems the can be provided from the shared services organization. • Manage a team of quality engineers and support teams by integrating, aligning and adjusting resources based upon the critical nee ds of the organization, as opposed to a single business unit. • Develop standards and review Quality Deliverables, such as Quality Plans, Inspection Test Plans, Incident Investigations, Internal Audit Plans. • Develop, maintain, and trend business and operational KPIs (COPQ, OTD, Service Level Agreement KPIs, etc) to define, facilitate, plan resources, implement, and validate continuous improvement and Operational Excellence (OE) projects. Link project metrics to strategic operational objectives. • Define / identity, record, track, maintain, and validate the following: o Non conformances, corrective actions, preventive actions, internal audit program o Risk mitigation plans o COPQ • Ensure requirements that are Critical to Quality (CTQ's) and Critical to Process (CTP's) are defined, understood and aligned with current capabilities, managed to ensure conformance, and clearly identified in the business processes. • Work with line management to develop an understanding and proper use of adequate risk assessment, root cause analysis, non conformance, corrective action, and COPQ collection and reduction tools. • Collaborate with line management to identify common activities between business units and develop common processes which can drive efficiency and across OII and alignment with the corporate QMS. • Maintain the QMS system by reviewing, verifying, approving, and developing or facilitating the development of procedures, as necessary. • Ensure the independent asset, product, and component inspection function is in accordance with industry standards, regulatory statutes, and customer requirements. • Identify competency needs for quality engineering positions, coach, mentor and establish development plans in order to ensure effective performance and achievement of business objectives. • Responsible for conducting an annual supplier risk assessment in collaboration with Supply Chain and the business units and establishing if supplier development or audit is required based upon risk, business needs, and impact. • Support the organization's drive towards excellence in Health and Safety performance. • Support includes but is not limited to conducting Stop observations, attending HSE related meetings, supporting HSE improvement projects and any other related task deemed appropriate by the Manager. • Displays required levels of engagement and a positive can-do attitude while consistently supporting Oceaneering culture of Safety, Quality, ongoing learning and continual improvement. • Any other roles or tasks as required to support our business needs. NON-ESSENTIAL • Coaches and mentors in use of the improvement model and appropriate analytical tools. • Assists in the preparation of budget and performance reports for senior management. • Understand when and how to establish requirements of Gage Calibration and perform, validate Measurement System Analysis (MSA) • Facilitate and provide appropriate supporting data for management review for local business units. Facilitate/support external audits for site certifications verify and distributing work to BU as necessary), internal and external audits. • Develop, maintain, ensure implementation and evaluate conformance to inspection and testing plans (ITPs), Incoming Quality Control plan (IQCPs), quality plans. • Other duties as assigned Supervisory Responsibilities • This position has direct supervisory responsibilities. Reporting Relationship • Reports to Snr Quality Manager Eastern Hemisphere • Dotted line report to Rosyth General Manager. • Performance may be measured by the Business Unit Line Manager using a Matrix Manager approach. Qualifications REQUIRED • Bachelor degree in STEM subject preferably in Quality, Mechanical, Electrical. (Equivalent experience in the related field will be considered). • Significant experience in Quality Engineering/Continuous Improvement role with demonstrable evidence of systems and process improvement. • Must have extensive working knowledge of ISO 9001 QMS requirements. • Experience of managing and working in an environment such as oil & gas products, manufacturing, automotive, medical devices, is preferred. DESIRED • Lead auditor • Six Sigma Black Belt/ Green belt experience • Facilitation training Knowledge, Skills, Abilities, and Other Characteristics • Ability to analyze situations accurately, utilizing a variety of analytical techniques in order to make well informed decisions. • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. • Ability to write, in formal and informal manners, accurate and clear dissemination of complex information, ideas, or concept. Use of appropriate language and terminology to assist reader in progressing from "A to Z". Knowledge and use of correct grammar, spelling, sentence structure, etc. • Poised, comfortable verbal communications in front of others; articulate, logical, concise, confident, and ability to establish credibility with the audience. Knowledge and use of correct grammar. • Shares information, advice, and suggestions to help others to be more successful; provides effective coaching • Skill to recognize and determine the need to shift priorities, and/or resources to maximize unit operations and/or address changes in assigned goals and objectives. • Knows when to escalate critical issues to own or others' management, if own efforts to enlist support have not succeeded • Ability to work in a team environment, remaining attentive to ideas, recognizing responsibilities, and actively participating with others to accomplish assignments and achieve desired goals. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
May 01, 2024
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities The Quality Manager will provide support to the manufacturing and service business units by implementing Oceaneering's Quality Management System (QMS) & related tools /processes to accelerate business results, as well as identify, measure and improve key performance indicators (KPIs) such as Cost of Poor Quality (COPQ) and on time delivery (OTD). Functions ESSENTIAL • Effectively manages a team of specialists and may manage support teams. • Applies advanced knowledge and skills of specialized area and demonstrates broad understanding of the • field. • Engaging with Matrix Manager as appropriate • Executes short-term operational activities and innovation for a specific work area through process • implementation. • Manages problem-solving within own work team and oversees solution implementation. • Setup, maintain, and revise as necessary the internal & external customer feedback collection process. • Develop a common understanding of alignment and direction regarding the processes that are business unit specific vs. the processes and systems the can be provided from the shared services organization. • Manage a team of quality engineers and support teams by integrating, aligning and adjusting resources based upon the critical nee ds of the organization, as opposed to a single business unit. • Develop standards and review Quality Deliverables, such as Quality Plans, Inspection Test Plans, Incident Investigations, Internal Audit Plans. • Develop, maintain, and trend business and operational KPIs (COPQ, OTD, Service Level Agreement KPIs, etc) to define, facilitate, plan resources, implement, and validate continuous improvement and Operational Excellence (OE) projects. Link project metrics to strategic operational objectives. • Define / identity, record, track, maintain, and validate the following: o Non conformances, corrective actions, preventive actions, internal audit program o Risk mitigation plans o COPQ • Ensure requirements that are Critical to Quality (CTQ's) and Critical to Process (CTP's) are defined, understood and aligned with current capabilities, managed to ensure conformance, and clearly identified in the business processes. • Work with line management to develop an understanding and proper use of adequate risk assessment, root cause analysis, non conformance, corrective action, and COPQ collection and reduction tools. • Collaborate with line management to identify common activities between business units and develop common processes which can drive efficiency and across OII and alignment with the corporate QMS. • Maintain the QMS system by reviewing, verifying, approving, and developing or facilitating the development of procedures, as necessary. • Ensure the independent asset, product, and component inspection function is in accordance with industry standards, regulatory statutes, and customer requirements. • Identify competency needs for quality engineering positions, coach, mentor and establish development plans in order to ensure effective performance and achievement of business objectives. • Responsible for conducting an annual supplier risk assessment in collaboration with Supply Chain and the business units and establishing if supplier development or audit is required based upon risk, business needs, and impact. • Support the organization's drive towards excellence in Health and Safety performance. • Support includes but is not limited to conducting Stop observations, attending HSE related meetings, supporting HSE improvement projects and any other related task deemed appropriate by the Manager. • Displays required levels of engagement and a positive can-do attitude while consistently supporting Oceaneering culture of Safety, Quality, ongoing learning and continual improvement. • Any other roles or tasks as required to support our business needs. NON-ESSENTIAL • Coaches and mentors in use of the improvement model and appropriate analytical tools. • Assists in the preparation of budget and performance reports for senior management. • Understand when and how to establish requirements of Gage Calibration and perform, validate Measurement System Analysis (MSA) • Facilitate and provide appropriate supporting data for management review for local business units. Facilitate/support external audits for site certifications verify and distributing work to BU as necessary), internal and external audits. • Develop, maintain, ensure implementation and evaluate conformance to inspection and testing plans (ITPs), Incoming Quality Control plan (IQCPs), quality plans. • Other duties as assigned Supervisory Responsibilities • This position has direct supervisory responsibilities. Reporting Relationship • Reports to Snr Quality Manager Eastern Hemisphere • Dotted line report to Rosyth General Manager. • Performance may be measured by the Business Unit Line Manager using a Matrix Manager approach. Qualifications REQUIRED • Bachelor degree in STEM subject preferably in Quality, Mechanical, Electrical. (Equivalent experience in the related field will be considered). • Significant experience in Quality Engineering/Continuous Improvement role with demonstrable evidence of systems and process improvement. • Must have extensive working knowledge of ISO 9001 QMS requirements. • Experience of managing and working in an environment such as oil & gas products, manufacturing, automotive, medical devices, is preferred. DESIRED • Lead auditor • Six Sigma Black Belt/ Green belt experience • Facilitation training Knowledge, Skills, Abilities, and Other Characteristics • Ability to analyze situations accurately, utilizing a variety of analytical techniques in order to make well informed decisions. • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. • Ability to write, in formal and informal manners, accurate and clear dissemination of complex information, ideas, or concept. Use of appropriate language and terminology to assist reader in progressing from "A to Z". Knowledge and use of correct grammar, spelling, sentence structure, etc. • Poised, comfortable verbal communications in front of others; articulate, logical, concise, confident, and ability to establish credibility with the audience. Knowledge and use of correct grammar. • Shares information, advice, and suggestions to help others to be more successful; provides effective coaching • Skill to recognize and determine the need to shift priorities, and/or resources to maximize unit operations and/or address changes in assigned goals and objectives. • Knows when to escalate critical issues to own or others' management, if own efforts to enlist support have not succeeded • Ability to work in a team environment, remaining attentive to ideas, recognizing responsibilities, and actively participating with others to accomplish assignments and achieve desired goals. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Parts Advisor Vacancy - Basingstoke Salary: £26,000 + BonusHours: Monday - Friday, 8am - 6pm, Saturday Mornings on a rota 1 in 4Ref: OC16882 We have a new vacancy for a Parts Advisor for my client's main dealership in the Basingstoke area. Excellent opportunity for a Parts Advisor to join a high performing team. This role suits a Parts Advisor looking for a long-term role. Fantastic benefits package that includes: Competitive starting salaryCompany pension schemeTraining provided Role: Receiving parts into stock. Booking parts to workshop jobs. Maintaining stock levels. Handling retail enquiries. Requirements: Minimum 1 year's Parts experience working for a Main Dealer. Knowledge of Kerridge or Pinnacle would be advantageous. Full UK Driving License. Consultant - Jack Adams Octane Recruitment INDAS Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Service, Aftersales and Parts - Service Advisor, Warranty Advisor, Warranty Administrator, Aftersales Advisor, Service Team Manager, Senior Service Advisor, Service Manager, Aftersales Manager, Parts Advisor, Parts Administrator, Parts Supervisor, Parts Managers Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
Apr 23, 2024
Full time
Parts Advisor Vacancy - Basingstoke Salary: £26,000 + BonusHours: Monday - Friday, 8am - 6pm, Saturday Mornings on a rota 1 in 4Ref: OC16882 We have a new vacancy for a Parts Advisor for my client's main dealership in the Basingstoke area. Excellent opportunity for a Parts Advisor to join a high performing team. This role suits a Parts Advisor looking for a long-term role. Fantastic benefits package that includes: Competitive starting salaryCompany pension schemeTraining provided Role: Receiving parts into stock. Booking parts to workshop jobs. Maintaining stock levels. Handling retail enquiries. Requirements: Minimum 1 year's Parts experience working for a Main Dealer. Knowledge of Kerridge or Pinnacle would be advantageous. Full UK Driving License. Consultant - Jack Adams Octane Recruitment INDAS Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Service, Aftersales and Parts - Service Advisor, Warranty Advisor, Warranty Administrator, Aftersales Advisor, Service Team Manager, Senior Service Advisor, Service Manager, Aftersales Manager, Parts Advisor, Parts Administrator, Parts Supervisor, Parts Managers Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
Mechanical Mining Engineer - Multi-Billion Dollar Consultancy Join our clients integrated consulting team and leverage your technical expertise to support projects, management, and business growth. Play a key role in advancing the company's engineering capabilities, fostering a project engineering centre of excellence and building strong commercial ties within the resource industries and wider community. Responsibilities:? Work closely with the Technical Director, Project Managers, Senior Mechanical Engineer, and Discipline Engineers.? Liaise with Senior Management, Finance and Administration, other Offices, and associated Group Companies.? Undertake consulting assignments related to projects.? Manage and control assigned project engineering tasks, including planning and organising.? Develop accurate project capital and operating cost estimates.? Participate in the development of client strategic plans.? Mentor and provide professional development for subordinate engineers and technicians.? Ensure compliance with Coffey ISM processes and procedures.? Solicit consulting work in collaboration with marketing and business development activities.? Implement industry best practices, methodologies, and procedures.? Participate in formal feasibility studies and contribute to business operations. Health & Safety:? Actively promote a safety culture and participate in company safety programs.? Support the implementation of safety and environmental requirements. Qualifications:? University degree in engineering (Preferably Mechanical Engineering).? Minimum 10 years of direct mining/mineral processing production/project development experience.? Minimum 5 years in managing engineering technical support services or working within a mining consultancy.? Experience and understanding of hard and soft rock underground and surface (open pit) mining operations, as well as mineral processing plants.? Professional engineering accreditation with an internationally recognised engineering institute or association, CEng, PEng, or equivalent.? QP (qualified person) or CP (competent person) status, or meet the requirements for such. Knowledge and Skills:? Engineering design office management and procedures.? Equipment selection, piping, wet and dry process design.? Materials handling and logistics.? Management and oversight of project teams.? Mine and industrial mineral processing infrastructure design and development.? Engineering cost estimation.? Project scheduling and budgeting.? Financial and economic appraisals.? Proficiency with MS suite of programs, AutoCAD, project scheduling software, etc. Benefits:? An excellent remuneration package, including a car allowance, contributory pension, life insurance, and health cover.? Flexible hybrid working options - compressed hours, reduced hours, flexible start and finish.? Additional perks such as childcare, extra holiday, and travel insurance.? Tailored professional training and development opportunities, with full support to achieve your career goals.? Fully paid professional membership subscription. To apply for this role, please hit the APPLY button below. If you are looking for something else, please contact us as we work across the Geosciences and Geotechnical industry UK wide covering: Geo-Environmental Engineer, Geotechnical Engineer, Geo-Environmental Consultant, Remediation Engineer, Hydrogeologist, Contaminated Land Consultant and much more. For a confident chat please contact Jared Syed Call , extension 7568 Email:
Apr 17, 2024
Full time
Mechanical Mining Engineer - Multi-Billion Dollar Consultancy Join our clients integrated consulting team and leverage your technical expertise to support projects, management, and business growth. Play a key role in advancing the company's engineering capabilities, fostering a project engineering centre of excellence and building strong commercial ties within the resource industries and wider community. Responsibilities:? Work closely with the Technical Director, Project Managers, Senior Mechanical Engineer, and Discipline Engineers.? Liaise with Senior Management, Finance and Administration, other Offices, and associated Group Companies.? Undertake consulting assignments related to projects.? Manage and control assigned project engineering tasks, including planning and organising.? Develop accurate project capital and operating cost estimates.? Participate in the development of client strategic plans.? Mentor and provide professional development for subordinate engineers and technicians.? Ensure compliance with Coffey ISM processes and procedures.? Solicit consulting work in collaboration with marketing and business development activities.? Implement industry best practices, methodologies, and procedures.? Participate in formal feasibility studies and contribute to business operations. Health & Safety:? Actively promote a safety culture and participate in company safety programs.? Support the implementation of safety and environmental requirements. Qualifications:? University degree in engineering (Preferably Mechanical Engineering).? Minimum 10 years of direct mining/mineral processing production/project development experience.? Minimum 5 years in managing engineering technical support services or working within a mining consultancy.? Experience and understanding of hard and soft rock underground and surface (open pit) mining operations, as well as mineral processing plants.? Professional engineering accreditation with an internationally recognised engineering institute or association, CEng, PEng, or equivalent.? QP (qualified person) or CP (competent person) status, or meet the requirements for such. Knowledge and Skills:? Engineering design office management and procedures.? Equipment selection, piping, wet and dry process design.? Materials handling and logistics.? Management and oversight of project teams.? Mine and industrial mineral processing infrastructure design and development.? Engineering cost estimation.? Project scheduling and budgeting.? Financial and economic appraisals.? Proficiency with MS suite of programs, AutoCAD, project scheduling software, etc. Benefits:? An excellent remuneration package, including a car allowance, contributory pension, life insurance, and health cover.? Flexible hybrid working options - compressed hours, reduced hours, flexible start and finish.? Additional perks such as childcare, extra holiday, and travel insurance.? Tailored professional training and development opportunities, with full support to achieve your career goals.? Fully paid professional membership subscription. To apply for this role, please hit the APPLY button below. If you are looking for something else, please contact us as we work across the Geosciences and Geotechnical industry UK wide covering: Geo-Environmental Engineer, Geotechnical Engineer, Geo-Environmental Consultant, Remediation Engineer, Hydrogeologist, Contaminated Land Consultant and much more. For a confident chat please contact Jared Syed Call , extension 7568 Email:
Lead the design of aircraft systems and structures as a Senior Mechanical Design Engineer for this established aerospace and defence company.This organisation works with novel technologies and a specialised varied fleet of aircrafts to allow for the completion of complex data-gathering missions effectively and safely. They emphasise the importance of personal and professional development with their varied support schemes and annual salary reviews.You will be responsible for managing all design phases of technical projects as well as handling scheduling, estimating and completion of design data. About the Role: Lead the design of technical projects, ensuring compliance with regulatory standards. Collaborate on cross-functional teams, providing engineering guidance to support projects. Compile design and certification data for various design reviews. About You: Ideally, a degree or HND/HNC/OND/ONC in mechanical engineering or equivalent. Experience working on aircraft - both commercial and military would be advantageous. Proficiency in CAD (Catia experience advantageous) and stress analysis (Abaqus/ CAE). Knowledge of regulatory requirements (CAA, EASA, FAA, Part 21, CS-25). Previous roles as a design checker signatory or Compliance Verification Engineer desirable. Membership in a professional engineering society or Professional Registration with relevant Engineering Council and evidence of CPD would be desirable. Key Information: Senior Mechanical Design Engineer - Aerospace Location: Bournemouth Airport (Hybrid) Salary: £54,000-£61,000 Key Skills: Mechanical Design, Aircraft structure, CAD Proficiency (Catia), Stress Analysis (Abaqus/CAE), Regulatory Knowledge (CAA, EASA, FAA, Part 21, CS-25), Compliance Verification ExperienceYou will be successful in this role if you are an ambitious Mechanical Design Engineer within aerospace and defence looking to advance your technical capabilities further.Due to the nature of work undertaken by our client, incumbents of these positions are required to undergo pre-employment screening and must be able to satisfy clearance criteria for UK Security Vetting to SC Level.Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days please presume your application has been unsuccessful on this occasion. You are of course free to resubmit your CV/details in the future and we shall assess your suitability at that time.This role is a permanent position.
Apr 11, 2024
Full time
Lead the design of aircraft systems and structures as a Senior Mechanical Design Engineer for this established aerospace and defence company.This organisation works with novel technologies and a specialised varied fleet of aircrafts to allow for the completion of complex data-gathering missions effectively and safely. They emphasise the importance of personal and professional development with their varied support schemes and annual salary reviews.You will be responsible for managing all design phases of technical projects as well as handling scheduling, estimating and completion of design data. About the Role: Lead the design of technical projects, ensuring compliance with regulatory standards. Collaborate on cross-functional teams, providing engineering guidance to support projects. Compile design and certification data for various design reviews. About You: Ideally, a degree or HND/HNC/OND/ONC in mechanical engineering or equivalent. Experience working on aircraft - both commercial and military would be advantageous. Proficiency in CAD (Catia experience advantageous) and stress analysis (Abaqus/ CAE). Knowledge of regulatory requirements (CAA, EASA, FAA, Part 21, CS-25). Previous roles as a design checker signatory or Compliance Verification Engineer desirable. Membership in a professional engineering society or Professional Registration with relevant Engineering Council and evidence of CPD would be desirable. Key Information: Senior Mechanical Design Engineer - Aerospace Location: Bournemouth Airport (Hybrid) Salary: £54,000-£61,000 Key Skills: Mechanical Design, Aircraft structure, CAD Proficiency (Catia), Stress Analysis (Abaqus/CAE), Regulatory Knowledge (CAA, EASA, FAA, Part 21, CS-25), Compliance Verification ExperienceYou will be successful in this role if you are an ambitious Mechanical Design Engineer within aerospace and defence looking to advance your technical capabilities further.Due to the nature of work undertaken by our client, incumbents of these positions are required to undergo pre-employment screening and must be able to satisfy clearance criteria for UK Security Vetting to SC Level.Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days please presume your application has been unsuccessful on this occasion. You are of course free to resubmit your CV/details in the future and we shall assess your suitability at that time.This role is a permanent position.
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Feb 01, 2024
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Job Title: Senior Project Manager Company/Division: adi Mechanical Ltd Reporting To: Director of Operations - adi Mechanical Job Purpose: Project Management of processes and solutions from start to finish Key Responsibilities A key primary role would be to work with the Senior Management team to assist on the growth and profitability of the Company - this could include using your experience in Project Management procedures, people development, sales development, etc Compiling Contract Files, checking customer data and specifications. Checking budgets and technical information at sales hand over prior to manufacture. Scheduling project programme. Create, issue and maintain timing plans. Liaise and coordinate with design engineers and manufacturing team. Dealing with contract variations. Preparing new quotations. Compiling risk assessments and method statements for site installations. Liaising with the clients. Ensuring completion of the project to the customer requirements. Compile project buy-off documentation. Compile and present Project Reports. Produce accurate and detailed quotations Produce detailed, works schedules, resources and projects plans Assist with bid proposals & contract negotiations Plan and manage resource, both sub contract and direct labour Manage & deliver project plans Report progress, manage risks and respond to issues Build & develop strong client relationships Customer Service Provide exemplary service to internal and external customers/clients. Communication Communicate, to appropriate people, information obtained on such subjects as customer activities, competitor activities, product applications, problems and opportunities in a timely and effective manner. To utilise company systems to facilitate effective communications: e-mail, telephone and fax. Personal Aspects To identify and communicate any problems/barriers affecting realisation of potential business or opportunities for improvements to your manager, with suggestions for resolution where possible. Do not wait to be managed. To be familiar with the Staff Guide, Management Philosophy and Leadership Philosophy and live the Company Values. Be aware and understand the company's policies. To take responsibility for your own Personal Development Plan (PDP) and assist in documenting good practice. To carry out any reasonable tasks in accordance with your position, aiming to add value. To acquire and maintain an appropriate knowledge of adi products, services and customer applications, industry and process knowledge. To keep abreast of competitor activity and market conditions, pertinent to your specialisation. To operate to company and agreed procedures on document handling and other relevant data sheets. To operate with high integrity at all times. Quality, Environmental, Health and Safety Ensure all operational procedures, safe working practices and Health and Safety procedures are adhered to. Be familiar with and adhere to the below company policies and procedures :- Employee Handbook Driving for Work Policy and Handbook Quality Environmental Health and Safety Handbook and associated procedures Comply with risk assessments and method statements Always use the PPE specified in risk assessments and method statements Comply with customer site rules and security procedures as required General Duties Be flexible within the broad remit of the post. Take direction and instruction on priorities from line management, which may vary from time to time. Carry out any other reasonable projects, tasks or duties to support the business as directed by line management. Any other duties the Company considers appropriate to your abilities, including duties which would not normally be associated with your job title. Person Specification Experience: Previous experience working as a project or contracts engineer. Work experience in automotive industry an advantage. Preferred work ex
Aug 16, 2023
Full time
Job Title: Senior Project Manager Company/Division: adi Mechanical Ltd Reporting To: Director of Operations - adi Mechanical Job Purpose: Project Management of processes and solutions from start to finish Key Responsibilities A key primary role would be to work with the Senior Management team to assist on the growth and profitability of the Company - this could include using your experience in Project Management procedures, people development, sales development, etc Compiling Contract Files, checking customer data and specifications. Checking budgets and technical information at sales hand over prior to manufacture. Scheduling project programme. Create, issue and maintain timing plans. Liaise and coordinate with design engineers and manufacturing team. Dealing with contract variations. Preparing new quotations. Compiling risk assessments and method statements for site installations. Liaising with the clients. Ensuring completion of the project to the customer requirements. Compile project buy-off documentation. Compile and present Project Reports. Produce accurate and detailed quotations Produce detailed, works schedules, resources and projects plans Assist with bid proposals & contract negotiations Plan and manage resource, both sub contract and direct labour Manage & deliver project plans Report progress, manage risks and respond to issues Build & develop strong client relationships Customer Service Provide exemplary service to internal and external customers/clients. Communication Communicate, to appropriate people, information obtained on such subjects as customer activities, competitor activities, product applications, problems and opportunities in a timely and effective manner. To utilise company systems to facilitate effective communications: e-mail, telephone and fax. Personal Aspects To identify and communicate any problems/barriers affecting realisation of potential business or opportunities for improvements to your manager, with suggestions for resolution where possible. Do not wait to be managed. To be familiar with the Staff Guide, Management Philosophy and Leadership Philosophy and live the Company Values. Be aware and understand the company's policies. To take responsibility for your own Personal Development Plan (PDP) and assist in documenting good practice. To carry out any reasonable tasks in accordance with your position, aiming to add value. To acquire and maintain an appropriate knowledge of adi products, services and customer applications, industry and process knowledge. To keep abreast of competitor activity and market conditions, pertinent to your specialisation. To operate to company and agreed procedures on document handling and other relevant data sheets. To operate with high integrity at all times. Quality, Environmental, Health and Safety Ensure all operational procedures, safe working practices and Health and Safety procedures are adhered to. Be familiar with and adhere to the below company policies and procedures :- Employee Handbook Driving for Work Policy and Handbook Quality Environmental Health and Safety Handbook and associated procedures Comply with risk assessments and method statements Always use the PPE specified in risk assessments and method statements Comply with customer site rules and security procedures as required General Duties Be flexible within the broad remit of the post. Take direction and instruction on priorities from line management, which may vary from time to time. Carry out any other reasonable projects, tasks or duties to support the business as directed by line management. Any other duties the Company considers appropriate to your abilities, including duties which would not normally be associated with your job title. Person Specification Experience: Previous experience working as a project or contracts engineer. Work experience in automotive industry an advantage. Preferred work ex
Job Title: Site Mechanical Fitter Location: Rotherham Shifts: Days regular Salary: £32,000 - £35,000 Metalis are working with a well established material handling company who are currently looking to expand their site team by recruiting for a site mechanical fitter. Job Duties: Conduct mechanical installation and maintenance projects on clients site, adhering to health & safety policies. Repair, test and make modifications to company equipment. Ensure that all electrical components are PAT tested and in good condition. Carry out preventative maintenance and service checks. Conduct all appropriate risk assessments and method statements as required. Ensure design issues are reported to senior management. Job Specification: Apprentice trained in an engineering discipline or mechanically minded. Experience within a site based role would be an advantage. Please note this role will involve site work which will include the use of a company vehicle which will need to be kept clean and tidy. There is also a requirements for some working away and weekend work, so the candidate will need to be flexible.
Aug 01, 2023
Full time
Job Title: Site Mechanical Fitter Location: Rotherham Shifts: Days regular Salary: £32,000 - £35,000 Metalis are working with a well established material handling company who are currently looking to expand their site team by recruiting for a site mechanical fitter. Job Duties: Conduct mechanical installation and maintenance projects on clients site, adhering to health & safety policies. Repair, test and make modifications to company equipment. Ensure that all electrical components are PAT tested and in good condition. Carry out preventative maintenance and service checks. Conduct all appropriate risk assessments and method statements as required. Ensure design issues are reported to senior management. Job Specification: Apprentice trained in an engineering discipline or mechanically minded. Experience within a site based role would be an advantage. Please note this role will involve site work which will include the use of a company vehicle which will need to be kept clean and tidy. There is also a requirements for some working away and weekend work, so the candidate will need to be flexible.
Computer Futures - South West
Midsomer Norton, Somerset
Role Overview: You will then produce suitable Test Plans, Test Cases, Test Schedules, set-up the Test Environment, execute the tests, raise and retest defects, report on test progress and completion and provide recommendations for improvements. Skills/Experience/Qualities: Test experience in Electronics, Transmissions (VHF, data transfers, tested API's, simulators, emulators etc) Android & iOS testing on mobiles, tablets and laptops/PC's Familiarity with various testing techniques Good knowledge of the Software Delivery Lifecycle (SDLC) Experience in setting up test automation from scratch (not just run automated suites other have previously set up) Manual & Automation test experience (ie using Python). Test Design, Planning & Estimation Embedded systems testing User Acceptance Test (UAT) experience Test Management Tool experience - loading & running tests, raising & retesting defects etc. in ie JIRA, Zephyr, SpiraTest or HP QC/ALM (not just tools to execute tests) Handling electronics and mechanical components Use of electronic tools such as multimeters, data loggers Familiar with software version control (ie SVN, BitBucket etc.) Proficient in the use of Windows operating system and Microsoft Office tools Keen eye for details and an analytical mindset Reporting progress and how delays can be addressed Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy
Dec 19, 2022
Full time
Role Overview: You will then produce suitable Test Plans, Test Cases, Test Schedules, set-up the Test Environment, execute the tests, raise and retest defects, report on test progress and completion and provide recommendations for improvements. Skills/Experience/Qualities: Test experience in Electronics, Transmissions (VHF, data transfers, tested API's, simulators, emulators etc) Android & iOS testing on mobiles, tablets and laptops/PC's Familiarity with various testing techniques Good knowledge of the Software Delivery Lifecycle (SDLC) Experience in setting up test automation from scratch (not just run automated suites other have previously set up) Manual & Automation test experience (ie using Python). Test Design, Planning & Estimation Embedded systems testing User Acceptance Test (UAT) experience Test Management Tool experience - loading & running tests, raising & retesting defects etc. in ie JIRA, Zephyr, SpiraTest or HP QC/ALM (not just tools to execute tests) Handling electronics and mechanical components Use of electronic tools such as multimeters, data loggers Familiar with software version control (ie SVN, BitBucket etc.) Proficient in the use of Windows operating system and Microsoft Office tools Keen eye for details and an analytical mindset Reporting progress and how delays can be addressed Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy
Company Profile You must reside and have the right to work within the UK ROV Piloting experience is essential for applying to this opening Oceaneering are currently recruiting to support the continued growth in our Europe Region with a sign-on bonuses up to £3,000 available Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Responsible for operating Remotely Operated Vehicles, Subsea Tooling, IWOCS and RWOCS Systems, Tensioning and Reel Systems in a safe and efficient manner, and maintaining and repairing all electronic, electrical, mechanical, and hydraulic systems and sub-systems associated with same including component repair, replacement and troubleshooting. Functions Operate equipment to include cameras (video and still), acoustic positioning systems, sonars, manipulators (robotic arms), LARS (Launch and Recovery Systems), hydraulic power units, complex subsea tooling, surface, and subsea workover systems. Assist or pilot the ROV including evaluating the environment conditions and hazards, dock/undock from TMS (tether management system), and navigate the ROV by acoustics, sonar and visual (video). Perform maintenance/repairs on equipment: maintain/ repair electronics, maintain/ repair hydraulics, maintain/repair mechanics, use test equipment, calibrate, and align equipment, and perform general housekeeping and corrosion control. Will operate and repair electrical over hydraulic and direct hydraulic control systems that interact with pumps, valves and other hydraulic transmission and power equipment. Will operate and interface sub-sea navigational equipment including but not limited to magnetic compass, gyro, transducer, sonar, altimeter, and associated survey equipment. Integrates and operates tooling including but not limited to cutters, pump units, multipurpose skids, dredging systems, standalone sensory systems, and any other tooling integrated to the Remotely Operated Vehicle. Maintains parts and supplies inventory associated with all electrical, electronic, mechanical, and hydraulic assemblies and subassemblies. Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications Qualifications (Requires Regional Variance) High School Graduate or General Education Degree (GED), Technical/Associates degree preferred. 12 months of formal mechanical and hydraulic training and 12 months of formal electrical and electronics training; or combination of education and experience. Must be able to obtain a valid Passport and any other regionally mandated offshore work requirement documents as appropriate. Knowledge, Skills, Abilities, and Other Characteristics Knowledge of appropriate steps to analytical problem solving. Ability to establish and maintain cooperative working relationships. Ability to work in a team environment, remaining attentive to ideas, recognizing responsibilities, and actively participating with others to accomplish assignments and achieve desired goals. Treats others fairly and with respect. Knowledge of company policies, rules, regulations, business goals, vision, organizational structure, culture, philosophy, operating principles, and values, etc. Ability to establish and maintain project priorities. Seeks out new learning experiences. Identifies what needs to be done and acts before being asked or required. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Dec 18, 2022
Full time
Company Profile You must reside and have the right to work within the UK ROV Piloting experience is essential for applying to this opening Oceaneering are currently recruiting to support the continued growth in our Europe Region with a sign-on bonuses up to £3,000 available Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Responsible for operating Remotely Operated Vehicles, Subsea Tooling, IWOCS and RWOCS Systems, Tensioning and Reel Systems in a safe and efficient manner, and maintaining and repairing all electronic, electrical, mechanical, and hydraulic systems and sub-systems associated with same including component repair, replacement and troubleshooting. Functions Operate equipment to include cameras (video and still), acoustic positioning systems, sonars, manipulators (robotic arms), LARS (Launch and Recovery Systems), hydraulic power units, complex subsea tooling, surface, and subsea workover systems. Assist or pilot the ROV including evaluating the environment conditions and hazards, dock/undock from TMS (tether management system), and navigate the ROV by acoustics, sonar and visual (video). Perform maintenance/repairs on equipment: maintain/ repair electronics, maintain/ repair hydraulics, maintain/repair mechanics, use test equipment, calibrate, and align equipment, and perform general housekeeping and corrosion control. Will operate and repair electrical over hydraulic and direct hydraulic control systems that interact with pumps, valves and other hydraulic transmission and power equipment. Will operate and interface sub-sea navigational equipment including but not limited to magnetic compass, gyro, transducer, sonar, altimeter, and associated survey equipment. Integrates and operates tooling including but not limited to cutters, pump units, multipurpose skids, dredging systems, standalone sensory systems, and any other tooling integrated to the Remotely Operated Vehicle. Maintains parts and supplies inventory associated with all electrical, electronic, mechanical, and hydraulic assemblies and subassemblies. Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications Qualifications (Requires Regional Variance) High School Graduate or General Education Degree (GED), Technical/Associates degree preferred. 12 months of formal mechanical and hydraulic training and 12 months of formal electrical and electronics training; or combination of education and experience. Must be able to obtain a valid Passport and any other regionally mandated offshore work requirement documents as appropriate. Knowledge, Skills, Abilities, and Other Characteristics Knowledge of appropriate steps to analytical problem solving. Ability to establish and maintain cooperative working relationships. Ability to work in a team environment, remaining attentive to ideas, recognizing responsibilities, and actively participating with others to accomplish assignments and achieve desired goals. Treats others fairly and with respect. Knowledge of company policies, rules, regulations, business goals, vision, organizational structure, culture, philosophy, operating principles, and values, etc. Ability to establish and maintain project priorities. Seeks out new learning experiences. Identifies what needs to be done and acts before being asked or required. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Overview / Responsibilities Wood is currently recruiting for a Senior Structural Designer to join our multidiscipline and multi-client Aberdeen based Engineering Hub to support various scopes on a contract basis.Experience in Autocad & E3D essential. This role requires extensive experience in oil and gas petrochemical industry. This role will be based within Aberdeen office with hybrid working arrangements in place. Contributes to engineering excellence by providing the link between engineering design theory and practical application, translating critical design concepts into workable plans for tangible end-products Prepares engineering drawings in their discipline area from rough sketches or from general engineering and design information according to established standards and procedures Create designs and sketch out detailed plans for projects such as commercial, industrial, and civil sector structures and plant and/or manufactured products and systems Plans and carries out technical assignments of substantial variety and complexity Capable of handling assignments which involve a variety of procedures and techniques Undertakes technical assignments that are a significant part of an ongoing engineering program Prepares mechanical or digital drawings, diagrams or blueprints and/or models of various products or structures, using computer-aided drafting (CAD) and/or computer-aided drafting and design (CADD) software Key Responsibilities: Develops working drawings, within company and industry standards and codes, from equipment specifications and detailed drawings to support completion of engineering deliverables Creates drawings involving plans, layouts, calculations and bills of material Works on assignments involving a variety of design procedures and techniques Records observations, performs calculations and prepares reports on assignments Performs layouts, design and checking work from the basic data supplied Designs and makes detail drawings from rough sketches involving intricate calculations and the application of fundamental engineering principles Establishes project drafting standards and monitors their conformance Identifies cost effective solutions to design problems Assists in the preparation of bid evaluations Designs and constructs models, prototypes, processes or equipment; compiles and evaluates data, makes recommendations, prepares reports Prepares estimates of time, quantities, materials and labour required for activities related to testing, installation, manufacture, design or construction. Generates bill of materials from finished designs At more experienced levels, may act as coordinator on small projects, prepares specifications for complex equipment, processes, etc Ensures quality in design, technical accuracy in the preparation of drawings, material quantities, etc including reviewing others work at more senior levels. Plans assigned work effectively and obtains/provides information liaising with the project team and line manager, in time to control man-hours and achieve targets Carries out site visits / surveys and provides inputs to site visit reports Skills / Qualifications Qualifications: Minimum ISCED level 5 short-cycle tertiary education in engineering discipline Knowledge, skills and experience: An understanding of related engineering principles and practices, plus training and diversified experience in the field of activity is required Capable of interpreting key documents including; engineering standards, piping material specifications, P&IDs and Line Lists Technically oriented, mechanically inclined, good at mathematics and talented at translating intangible concepts into hands-on project plans Competent user of CAD/D software Personal attributes: Enjoys being involved in the practical application of complex theoretical principles Self-motivated and completes given tasks to enhance the overall team performance Prepared to take on new tasks and learn new technical subjects / skills Continuously develops own knowledge and abilities Good at problem-solving, logical and methodical Strong attention to detail Good communicator Company Overview Wood is a global leader in engineering and consultancy across energy and the built environment, helping to unlock solutions to some of the world's most critical challenges. We provide consulting, projects and operations solutions in more than 60 countries, employing around 40,000 people. Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
Dec 18, 2022
Full time
Overview / Responsibilities Wood is currently recruiting for a Senior Structural Designer to join our multidiscipline and multi-client Aberdeen based Engineering Hub to support various scopes on a contract basis.Experience in Autocad & E3D essential. This role requires extensive experience in oil and gas petrochemical industry. This role will be based within Aberdeen office with hybrid working arrangements in place. Contributes to engineering excellence by providing the link between engineering design theory and practical application, translating critical design concepts into workable plans for tangible end-products Prepares engineering drawings in their discipline area from rough sketches or from general engineering and design information according to established standards and procedures Create designs and sketch out detailed plans for projects such as commercial, industrial, and civil sector structures and plant and/or manufactured products and systems Plans and carries out technical assignments of substantial variety and complexity Capable of handling assignments which involve a variety of procedures and techniques Undertakes technical assignments that are a significant part of an ongoing engineering program Prepares mechanical or digital drawings, diagrams or blueprints and/or models of various products or structures, using computer-aided drafting (CAD) and/or computer-aided drafting and design (CADD) software Key Responsibilities: Develops working drawings, within company and industry standards and codes, from equipment specifications and detailed drawings to support completion of engineering deliverables Creates drawings involving plans, layouts, calculations and bills of material Works on assignments involving a variety of design procedures and techniques Records observations, performs calculations and prepares reports on assignments Performs layouts, design and checking work from the basic data supplied Designs and makes detail drawings from rough sketches involving intricate calculations and the application of fundamental engineering principles Establishes project drafting standards and monitors their conformance Identifies cost effective solutions to design problems Assists in the preparation of bid evaluations Designs and constructs models, prototypes, processes or equipment; compiles and evaluates data, makes recommendations, prepares reports Prepares estimates of time, quantities, materials and labour required for activities related to testing, installation, manufacture, design or construction. Generates bill of materials from finished designs At more experienced levels, may act as coordinator on small projects, prepares specifications for complex equipment, processes, etc Ensures quality in design, technical accuracy in the preparation of drawings, material quantities, etc including reviewing others work at more senior levels. Plans assigned work effectively and obtains/provides information liaising with the project team and line manager, in time to control man-hours and achieve targets Carries out site visits / surveys and provides inputs to site visit reports Skills / Qualifications Qualifications: Minimum ISCED level 5 short-cycle tertiary education in engineering discipline Knowledge, skills and experience: An understanding of related engineering principles and practices, plus training and diversified experience in the field of activity is required Capable of interpreting key documents including; engineering standards, piping material specifications, P&IDs and Line Lists Technically oriented, mechanically inclined, good at mathematics and talented at translating intangible concepts into hands-on project plans Competent user of CAD/D software Personal attributes: Enjoys being involved in the practical application of complex theoretical principles Self-motivated and completes given tasks to enhance the overall team performance Prepared to take on new tasks and learn new technical subjects / skills Continuously develops own knowledge and abilities Good at problem-solving, logical and methodical Strong attention to detail Good communicator Company Overview Wood is a global leader in engineering and consultancy across energy and the built environment, helping to unlock solutions to some of the world's most critical challenges. We provide consulting, projects and operations solutions in more than 60 countries, employing around 40,000 people. Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Execute inspections as required by Offshore Inspection Engineers (OIE) and Senior Inspection Engineer (SIE) and report back in the required approved format in a timely manor. Supervise and coordinate ad-hoc NDT inspectors, 3rd party companies and/or NDT inspection teams on platform to ensure that they execute all ultrasonic testing, eddy current inspection, magnetic particle inspection, dye penetrant inspections and radiographic inspections on items of static equipment and associated piping in accordance with company, IRATA, client standards and regulatory requirements and ensure reports are in the correct format and submitted in a timely manner. At times may be required to act as additional persons within the NDT inspection team to complete inspections in line with qualifications. Functions ESSENTIAL Carry out the most effective NDT techniques to components requiring inspection Utilise rope access capabilities when required working at height for long periods of time Perform rope access inspection safely in harsh environments ensuring that regular breaks are taken Ensure that the correct rope access equipment is utilised and that harness is worn at all times Ensure that work area is safe to carry out rope access activities Ensure permits are in place for technicians and work-scope is readily available for inspection Evaluate results of the test in accordance with applicable specification Ensure inspection is carried out within the parameters of the applicable specification Produce clear and concise reports detailing the methods used and results of the inspection with isometrics or sketches showing the areas inspected and the results obtained. Report all findings noting any limitations / test restrictions is applicable Cross check all NDT reports to ensure the quality / results / scope of the report is correct, ensuring the correct procedure & technique is referenced, the equipment / consumables reported are correct and in calibration and the report is the correct revision. Once checked countersign as supervisor. Send signed sample reports to the office for audit purposes to cross check quality Report any near hit's, incidents-accidents and first aid actions as per Oceaneering procedure utilizing the correct report format Ensure client specific observation / safety cards are being completed daily by all technicians Perform regular safety and pre job toolbox talks to technicians Carry out risk assessments/Take2 as required Supervise any radiography teams on the platform and ensure they are completing the radiography pre-post checklist sheets each day they perform radiography Perform routine technician feedback to management on their attitude, punctuality, safety performance and competence Ensure technicians annually perform technical monitoring audits as per qualified NDT discipline Ensure function tests are performed according to the procedure on all NDT and radiography equipment and any faulty equipment is detailed back to the supervisor Ensure UT technicians perform probe checks each day they perform UT inspection on site Maintain and control NDT equipment and consumables ensuring equipment/consumable registers are accurately updated and sent through to NDT Project Management Ensure and track all company inspection equipment on platform is calibrated and well maintained and report accordingly Ensure all consumables are in date and consumable certificate of conformance are present. Prior to packing any returned equipment check labelling is accurate, container is locked, and all equipment has been verified Support OIE in producing IQ's Maintain company's inspection files Carry out work in a timely and efficient manner in order to meet deadlines, changing priorities when the situation requires Carry out work in accordance with Oceaneering operating procedures and statutory/client specifications and requirements NON-ESSENTIAL Undertake any other duties of a reasonable nature as required by Management Safety Ensure that the safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment Supervisory Responsibilities No direct supervisory responsibilities, however, supervises offshore NDT teams, whilst supporting the O.I.E. Responsibilities include planning, assigning, and directing work; rewarding and disciplining employees; addressing complaints, performing routine safety talks and resolving problems If an appointed RPS, it is their responsibility for the safety of their team, and all that are working around the vicinity of the barrier. It is their duty to ensure barriers are erected correctly at a safe distance. Reporting Relationship This person will report to the Project Manager Performance will be measured by the Project Manager and dotted line manager - Manager, Operations, IMDS Aberdeen Qualifications Qualifications To perform the job successfully, an individual should demonstrate the following competencies: REQUIRED Valid Passport Valid Full UK Driving Licence ASNT/PCN Level 2 or CSWIP Visual Inspection ASNT/PCN Level 2 Ultrasonic Testing ASNT/PCN Level 2 in MPI and / or DPI. IRATA Level 1 (minimum). Offshore Survival / Offshore Medical / M.I.S.T / Cat A E.B.S / Bi-Deltoid Measurement / Eye Test Flexible approach, team player and good communication skills IT literate - Word & Excel (minimum) DESIRED GCSE pass in English, Maths and Science Excellent organisation and interpersonal skills ASNT/PCN Radiological Protection Supervision (RPS) Knowledge, Skills, Abilities, and Other Characteristics In order to perform this job successfully an individual must be able to perform each essential duty satisfactorily. the requirements listed below are representative of the knowledge, skill and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Education and/or Experience Preferred associate degree or equivalent from two-year college or technical school; Minimum of 5 year experience and or training; or equivalent combination of education and experience in structural and mechanical drafting/design or related field. Must also be familiar with QA/QC systems. Minimum 1-year experience in the relevant inspection techniques within the oil and gas industry. Language Ability to read, analyzes, and interprets general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardisation exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel and PeopleSoft. Working Conditions This position is considered OFFSHORE which is characterised as follows. Outdoors and indoors, day and night, as well as over/near water. Requires working on or near moving equipment and vibrating equipment. Frequently the humidity is above 90%, noise is over 85 decibels and the light is intense/glare. Includes exposure to contaminants Requires working in cramped workspaces and getting into awkward positions Requires working in extremely bright or inadequate lighting conditions Potential exposure to airborne dust, fumes, and gases. Work surface is stable, height is elevated. Physical Activity/Requirements . click apply for full job details
Dec 18, 2022
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Execute inspections as required by Offshore Inspection Engineers (OIE) and Senior Inspection Engineer (SIE) and report back in the required approved format in a timely manor. Supervise and coordinate ad-hoc NDT inspectors, 3rd party companies and/or NDT inspection teams on platform to ensure that they execute all ultrasonic testing, eddy current inspection, magnetic particle inspection, dye penetrant inspections and radiographic inspections on items of static equipment and associated piping in accordance with company, IRATA, client standards and regulatory requirements and ensure reports are in the correct format and submitted in a timely manner. At times may be required to act as additional persons within the NDT inspection team to complete inspections in line with qualifications. Functions ESSENTIAL Carry out the most effective NDT techniques to components requiring inspection Utilise rope access capabilities when required working at height for long periods of time Perform rope access inspection safely in harsh environments ensuring that regular breaks are taken Ensure that the correct rope access equipment is utilised and that harness is worn at all times Ensure that work area is safe to carry out rope access activities Ensure permits are in place for technicians and work-scope is readily available for inspection Evaluate results of the test in accordance with applicable specification Ensure inspection is carried out within the parameters of the applicable specification Produce clear and concise reports detailing the methods used and results of the inspection with isometrics or sketches showing the areas inspected and the results obtained. Report all findings noting any limitations / test restrictions is applicable Cross check all NDT reports to ensure the quality / results / scope of the report is correct, ensuring the correct procedure & technique is referenced, the equipment / consumables reported are correct and in calibration and the report is the correct revision. Once checked countersign as supervisor. Send signed sample reports to the office for audit purposes to cross check quality Report any near hit's, incidents-accidents and first aid actions as per Oceaneering procedure utilizing the correct report format Ensure client specific observation / safety cards are being completed daily by all technicians Perform regular safety and pre job toolbox talks to technicians Carry out risk assessments/Take2 as required Supervise any radiography teams on the platform and ensure they are completing the radiography pre-post checklist sheets each day they perform radiography Perform routine technician feedback to management on their attitude, punctuality, safety performance and competence Ensure technicians annually perform technical monitoring audits as per qualified NDT discipline Ensure function tests are performed according to the procedure on all NDT and radiography equipment and any faulty equipment is detailed back to the supervisor Ensure UT technicians perform probe checks each day they perform UT inspection on site Maintain and control NDT equipment and consumables ensuring equipment/consumable registers are accurately updated and sent through to NDT Project Management Ensure and track all company inspection equipment on platform is calibrated and well maintained and report accordingly Ensure all consumables are in date and consumable certificate of conformance are present. Prior to packing any returned equipment check labelling is accurate, container is locked, and all equipment has been verified Support OIE in producing IQ's Maintain company's inspection files Carry out work in a timely and efficient manner in order to meet deadlines, changing priorities when the situation requires Carry out work in accordance with Oceaneering operating procedures and statutory/client specifications and requirements NON-ESSENTIAL Undertake any other duties of a reasonable nature as required by Management Safety Ensure that the safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment Supervisory Responsibilities No direct supervisory responsibilities, however, supervises offshore NDT teams, whilst supporting the O.I.E. Responsibilities include planning, assigning, and directing work; rewarding and disciplining employees; addressing complaints, performing routine safety talks and resolving problems If an appointed RPS, it is their responsibility for the safety of their team, and all that are working around the vicinity of the barrier. It is their duty to ensure barriers are erected correctly at a safe distance. Reporting Relationship This person will report to the Project Manager Performance will be measured by the Project Manager and dotted line manager - Manager, Operations, IMDS Aberdeen Qualifications Qualifications To perform the job successfully, an individual should demonstrate the following competencies: REQUIRED Valid Passport Valid Full UK Driving Licence ASNT/PCN Level 2 or CSWIP Visual Inspection ASNT/PCN Level 2 Ultrasonic Testing ASNT/PCN Level 2 in MPI and / or DPI. IRATA Level 1 (minimum). Offshore Survival / Offshore Medical / M.I.S.T / Cat A E.B.S / Bi-Deltoid Measurement / Eye Test Flexible approach, team player and good communication skills IT literate - Word & Excel (minimum) DESIRED GCSE pass in English, Maths and Science Excellent organisation and interpersonal skills ASNT/PCN Radiological Protection Supervision (RPS) Knowledge, Skills, Abilities, and Other Characteristics In order to perform this job successfully an individual must be able to perform each essential duty satisfactorily. the requirements listed below are representative of the knowledge, skill and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Education and/or Experience Preferred associate degree or equivalent from two-year college or technical school; Minimum of 5 year experience and or training; or equivalent combination of education and experience in structural and mechanical drafting/design or related field. Must also be familiar with QA/QC systems. Minimum 1-year experience in the relevant inspection techniques within the oil and gas industry. Language Ability to read, analyzes, and interprets general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardisation exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel and PeopleSoft. Working Conditions This position is considered OFFSHORE which is characterised as follows. Outdoors and indoors, day and night, as well as over/near water. Requires working on or near moving equipment and vibrating equipment. Frequently the humidity is above 90%, noise is over 85 decibels and the light is intense/glare. Includes exposure to contaminants Requires working in cramped workspaces and getting into awkward positions Requires working in extremely bright or inadequate lighting conditions Potential exposure to airborne dust, fumes, and gases. Work surface is stable, height is elevated. Physical Activity/Requirements . click apply for full job details
The role of Maintenance Fitter will play a safe and active part in maintenance activities, being responsible to rectify all engineering malfunctions / breakdowns safely and effectively to enable the continuity and productivity of the plant, in order to achieve current safety, output and quality targets. This role will be a great addition to a busy & successful team with the support of the Senior Works Engineer/Engineering Manager, operating on a 4 on 4 off shift pattern. What do you need to succeed in your application? City &Guilds (or equivalent) & at least 3 years' experience in a similar role Welding, burning and cutting, and machine shop machinery training. Abrasive wheel training Lifting and Slinging Training HAV Awareness Training Manual Handling Training Gas awareness training Confined space training Company online Induction COSHH Isolation Lock off Silica Awareness Working at Height (MEWP/SCISSOR LIFT AND HARNESS TRAINING) Spill Training (Environmental Awareness) Requirement of the role as Maintenance Engineer: To maintain production Budgeted Output, Quality and Yields. Ensure when carrying out any work at height a full working at height risk assessment is carried out. Before using any vibration tools ensure all monitoring equipment and have register is up to date and to ensure not to exceed acceptable limits To ensure isolation of all plant and equipment both electrically and mechanically before commencement of duties. Ensuring the use of personal ISO-LOCK when required. To adhere to rules and procedures involving the use of workshop equipment. Once work is completed including new installations ensure a full test has been carried out safety guards are put back, all safety features work and all debris removed before commencement / operation of the plant/equipment. As and when required to aid in tunnel kiln shutdown/light up and general maintenance. Return all tools used to their correct place and all debris to the correct skip. To work in conjunction with Maintenance electrician and assist as and when necessary. To carry out fabrication work and work in the quarry as and when instructed by management. To keep plant maintenance up to date. To use all hand/power tools and ladders safely and correctly using the required P.P.E and to take out of action immediately damaged /faulty items. Report all irregularities/health & safety issues to the maintenance foreman. To carry out housekeeping duties as and when required. Undertake any relevant training as requested Additional expectations: to comply with all aspects of the Compliance Policy to ensure that all the business/operations are performed in accordance with instructions and procedures and in such a way so as to prevent any fraudulent activities taking place to comply with the Health & Safety at Work Act 1974 and to observe the requirements of the Company Safety Policy and other relevant legislation to update all areas of knowledge as required to carry out the job with maximum effectiveness and to attend training/development courses as and when required to comply will all aspects of the HR Policies and Procedures of the Company
Dec 16, 2022
Full time
The role of Maintenance Fitter will play a safe and active part in maintenance activities, being responsible to rectify all engineering malfunctions / breakdowns safely and effectively to enable the continuity and productivity of the plant, in order to achieve current safety, output and quality targets. This role will be a great addition to a busy & successful team with the support of the Senior Works Engineer/Engineering Manager, operating on a 4 on 4 off shift pattern. What do you need to succeed in your application? City &Guilds (or equivalent) & at least 3 years' experience in a similar role Welding, burning and cutting, and machine shop machinery training. Abrasive wheel training Lifting and Slinging Training HAV Awareness Training Manual Handling Training Gas awareness training Confined space training Company online Induction COSHH Isolation Lock off Silica Awareness Working at Height (MEWP/SCISSOR LIFT AND HARNESS TRAINING) Spill Training (Environmental Awareness) Requirement of the role as Maintenance Engineer: To maintain production Budgeted Output, Quality and Yields. Ensure when carrying out any work at height a full working at height risk assessment is carried out. Before using any vibration tools ensure all monitoring equipment and have register is up to date and to ensure not to exceed acceptable limits To ensure isolation of all plant and equipment both electrically and mechanically before commencement of duties. Ensuring the use of personal ISO-LOCK when required. To adhere to rules and procedures involving the use of workshop equipment. Once work is completed including new installations ensure a full test has been carried out safety guards are put back, all safety features work and all debris removed before commencement / operation of the plant/equipment. As and when required to aid in tunnel kiln shutdown/light up and general maintenance. Return all tools used to their correct place and all debris to the correct skip. To work in conjunction with Maintenance electrician and assist as and when necessary. To carry out fabrication work and work in the quarry as and when instructed by management. To keep plant maintenance up to date. To use all hand/power tools and ladders safely and correctly using the required P.P.E and to take out of action immediately damaged /faulty items. Report all irregularities/health & safety issues to the maintenance foreman. To carry out housekeeping duties as and when required. Undertake any relevant training as requested Additional expectations: to comply with all aspects of the Compliance Policy to ensure that all the business/operations are performed in accordance with instructions and procedures and in such a way so as to prevent any fraudulent activities taking place to comply with the Health & Safety at Work Act 1974 and to observe the requirements of the Company Safety Policy and other relevant legislation to update all areas of knowledge as required to carry out the job with maximum effectiveness and to attend training/development courses as and when required to comply will all aspects of the HR Policies and Procedures of the Company
Overview / Responsibilities Wood is currently seeking to recruit Senior Package Equipment Engineers to work in its Reading office on a range of Study, preFEED, FEED and EPC Projects dealing with Carbon Capture and Storage, Green Energy, Recycling, Minerals Processing as well as Chemicals, Petrochemical and Refining, Oil and Gas. These are permanent staff positions The successful candidates will be required to undertake the following activities: Take responsibility for the design and engineering of vendor process packages, water treatment plant, fired heaters and mechanical handling equipment on a project Perform studies to assess feasibility and determine appropriate mechanical equipment Prepare specifications, data sheets and material requisitions describing package equipment Technically evaluate vendor bids for package equipment Review vendor drawings, calculations, and procedures Liaise with other Wood groups (Piping, Electrical, Control and Instrumentation, Civil and Structural, Construction) to facilitate the integration of package equipment into overall plant design Provide support, as required, to Procurement, Estimating, Cost and Planning Groups Assist, when required, with inspection, testing, installation, and commissioning Skills / Qualifications Degree in mechanical engineering (or related discipline) Possession of, working towards, C.Eng. status with the Institution of Mechanical Engineers (or similar professional body) Able to work independently or as part of a team Able to lead a team of mechanical engineers Good written and verbal communication skills Commercial awareness Familiarity with vendor packaged equipment (including process packages, water treatment, fired heaters and mechanical handling equipment) Experience in the Chemicals, Petrochemicals, Refining, Oil and Gas or related industries Company Overview Wood is a global leader in engineering and consultancy across energy and the built environment, helping to unlock solutions to some of the world's most critical challenges. We provide consulting, projects and operations solutions in more than 60 countries, employing around 40,000 people. Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws
Dec 15, 2022
Full time
Overview / Responsibilities Wood is currently seeking to recruit Senior Package Equipment Engineers to work in its Reading office on a range of Study, preFEED, FEED and EPC Projects dealing with Carbon Capture and Storage, Green Energy, Recycling, Minerals Processing as well as Chemicals, Petrochemical and Refining, Oil and Gas. These are permanent staff positions The successful candidates will be required to undertake the following activities: Take responsibility for the design and engineering of vendor process packages, water treatment plant, fired heaters and mechanical handling equipment on a project Perform studies to assess feasibility and determine appropriate mechanical equipment Prepare specifications, data sheets and material requisitions describing package equipment Technically evaluate vendor bids for package equipment Review vendor drawings, calculations, and procedures Liaise with other Wood groups (Piping, Electrical, Control and Instrumentation, Civil and Structural, Construction) to facilitate the integration of package equipment into overall plant design Provide support, as required, to Procurement, Estimating, Cost and Planning Groups Assist, when required, with inspection, testing, installation, and commissioning Skills / Qualifications Degree in mechanical engineering (or related discipline) Possession of, working towards, C.Eng. status with the Institution of Mechanical Engineers (or similar professional body) Able to work independently or as part of a team Able to lead a team of mechanical engineers Good written and verbal communication skills Commercial awareness Familiarity with vendor packaged equipment (including process packages, water treatment, fired heaters and mechanical handling equipment) Experience in the Chemicals, Petrochemicals, Refining, Oil and Gas or related industries Company Overview Wood is a global leader in engineering and consultancy across energy and the built environment, helping to unlock solutions to some of the world's most critical challenges. We provide consulting, projects and operations solutions in more than 60 countries, employing around 40,000 people. Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws
Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take real pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. PURPOSE OF THE JOB: We are looking for motivated, customer-focused people who want to join our team as a Senior Reliability Maintenance Engineering Technician. The focus of the Senior Reliability Maintenance Engineering Technician role is to ensure safety regulations and policies are adhered to, to ensure preventative maintenance is conducted on time to a high standard and to provide high levels of equipment availability through continuous improvement. Shift Pattern: This role includes working in non-traditional shift pattern, which may include nights and weekends. RESPONSIBILITIES: Role model health & safety best practices and monitor those around them to ensure they follow the example they set. Work in a hands-on manner and demonstrate SME (Subject Matter Expert) levels of knowledge on all MHE (Material Handling Equipment) in the building. Coach and mentor the technicians on shift. Support the line manager and to supervise the shift in their absence. Provide high levels of equipment availability to our internal customers by means of troubleshooting and prioritizing. Support continuous improvement of systems in a standard manner across the EU network. Develop and maintain a good working relationship across all levels in the organization. Understanding of OEE (Overall Equipment Effectiveness) and equipment performance metrics. Management of contractors. BASIC QUALIFICATIONS Multi skilled in both electrical and mechanical disciplines with relevant experience in automation or complex MHE environments. Solid foundational knowledge of PLC based controls systems. Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks. Knowledge of Statutory Compliance requirements. Ability to communicate (written & verbal) in English and the local language at CEFR Level B2 or higher. PREFERRED QUALIFICATIONS Proven ability to supervise and influence others on the team. Proven ability to multi-task and prioritize many different projects and workload. Experience of multi-contractor management. Experience in a multi-site environment. Apprentice Trained, HNC, HND, BSc, BEng Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice () to know more about how we collect, use and transfer the personal data of our candidates. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need an adjustment during the application and hiring process, including support for the interview or onboarding process, please contact the Applicant-Candidate Accommodation Team (ACAT), Monday through Friday from 7:00 am GMT - 4:00 pm GMT. If calling directly from the United Kingdom, please dial (tel:). If calling from Ireland, please dial (tel:).
Dec 15, 2022
Full time
Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take real pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. PURPOSE OF THE JOB: We are looking for motivated, customer-focused people who want to join our team as a Senior Reliability Maintenance Engineering Technician. The focus of the Senior Reliability Maintenance Engineering Technician role is to ensure safety regulations and policies are adhered to, to ensure preventative maintenance is conducted on time to a high standard and to provide high levels of equipment availability through continuous improvement. Shift Pattern: This role includes working in non-traditional shift pattern, which may include nights and weekends. RESPONSIBILITIES: Role model health & safety best practices and monitor those around them to ensure they follow the example they set. Work in a hands-on manner and demonstrate SME (Subject Matter Expert) levels of knowledge on all MHE (Material Handling Equipment) in the building. Coach and mentor the technicians on shift. Support the line manager and to supervise the shift in their absence. Provide high levels of equipment availability to our internal customers by means of troubleshooting and prioritizing. Support continuous improvement of systems in a standard manner across the EU network. Develop and maintain a good working relationship across all levels in the organization. Understanding of OEE (Overall Equipment Effectiveness) and equipment performance metrics. Management of contractors. BASIC QUALIFICATIONS Multi skilled in both electrical and mechanical disciplines with relevant experience in automation or complex MHE environments. Solid foundational knowledge of PLC based controls systems. Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks. Knowledge of Statutory Compliance requirements. Ability to communicate (written & verbal) in English and the local language at CEFR Level B2 or higher. PREFERRED QUALIFICATIONS Proven ability to supervise and influence others on the team. Proven ability to multi-task and prioritize many different projects and workload. Experience of multi-contractor management. Experience in a multi-site environment. Apprentice Trained, HNC, HND, BSc, BEng Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice () to know more about how we collect, use and transfer the personal data of our candidates. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need an adjustment during the application and hiring process, including support for the interview or onboarding process, please contact the Applicant-Candidate Accommodation Team (ACAT), Monday through Friday from 7:00 am GMT - 4:00 pm GMT. If calling directly from the United Kingdom, please dial (tel:). If calling from Ireland, please dial (tel:).
AC / Chiller / Refrigeration Engineer South West! £40,000 + Paid Travel Time (OTE: £56,000) A world renowned, leading name within the industrial refrigeration industry is looking to add to their highly skilled service team within the South West region! The successful engineer (s) will be required to perform both reactive and pre-planned service works, working predominantly with large scale industrial (Ammonia) systems, whilst occasionally being required to carry out works smaller scale commercial refrigeration equipment such as cold rooms and walk inn s, as and when required. Fault finding skills, both mechanical and electrical, are an absolute necessity, with a background in major repair works being desirable. Given the ever changing industry, there will also be work s on air conditioning and chiller systems! Applicants must be fully conversant and experienced in the refrigeration and air-conditioning industry, ideally a minimum of 12 months post apprenticeship. Whilst Ammonia safe handling would be desired the company in question would also be more than happy to fund this, and all the relevant training, for any engineer who was looking to further develop there On offer is a fantastic basic salary, of up to £43,000 with door to door travel time on top, making this a very lucrative position! There are unlimited O/T opportunities, a choice of fully expensed car or van, life insurance, private health care and high pension (6%) About Your Recruiter I entered the industry in the early 2000's joining Daikin Applied (then McQuay) as an apprentice upon leaving school before progressing into a senior engineering position within the industry. In 2013, I made the crazy decision to recruit for the industry, working with both leading manufacturers and specialist service providers. I know good candidates deserve great roles, and more importantly I realise the value employers place in their staff whilst out there representing their company. I aim to introduce key talent to the Air Con world
Dec 15, 2022
Full time
AC / Chiller / Refrigeration Engineer South West! £40,000 + Paid Travel Time (OTE: £56,000) A world renowned, leading name within the industrial refrigeration industry is looking to add to their highly skilled service team within the South West region! The successful engineer (s) will be required to perform both reactive and pre-planned service works, working predominantly with large scale industrial (Ammonia) systems, whilst occasionally being required to carry out works smaller scale commercial refrigeration equipment such as cold rooms and walk inn s, as and when required. Fault finding skills, both mechanical and electrical, are an absolute necessity, with a background in major repair works being desirable. Given the ever changing industry, there will also be work s on air conditioning and chiller systems! Applicants must be fully conversant and experienced in the refrigeration and air-conditioning industry, ideally a minimum of 12 months post apprenticeship. Whilst Ammonia safe handling would be desired the company in question would also be more than happy to fund this, and all the relevant training, for any engineer who was looking to further develop there On offer is a fantastic basic salary, of up to £43,000 with door to door travel time on top, making this a very lucrative position! There are unlimited O/T opportunities, a choice of fully expensed car or van, life insurance, private health care and high pension (6%) About Your Recruiter I entered the industry in the early 2000's joining Daikin Applied (then McQuay) as an apprentice upon leaving school before progressing into a senior engineering position within the industry. In 2013, I made the crazy decision to recruit for the industry, working with both leading manufacturers and specialist service providers. I know good candidates deserve great roles, and more importantly I realise the value employers place in their staff whilst out there representing their company. I aim to introduce key talent to the Air Con world