We are currently looking for a Factory Labourer/Operative to work in a busy company in Westerhope, Newcastle. Duties include Wrap door parts in preparation for despatch . Construct wood pallets as per instruction. Move materials in accordance with safe manual handling standards Use a Counterbalance FLT Measuring and cutting metals for door construction Assist Welders Paint and prep plates, guides, etc Complete basic assembly tasks. Assembly and dismantling of racking Keeping site tidy and safe Loading, lifting and tidy up of stores area General tidy up of metal products both in yard and factory site General labouring tasks detailed by the Production Controller. Sorting and packing goods in a factory yard Working both inside and outside Helping as a floater where and when required in the site within manufacturing areas The person Must be happy working inside and outside in a factory yard Have Labouring experience in a similar environment - please note that this is a factory environment and not a construction site Have previous measuring and cutting experience in particular with metals Be able to lift and load Hold a Counterbalance Forklift licence Be able to work unsupervised Be able to work on own initiative This role will be permanent for the right person
May 01, 2024
Seasonal
We are currently looking for a Factory Labourer/Operative to work in a busy company in Westerhope, Newcastle. Duties include Wrap door parts in preparation for despatch . Construct wood pallets as per instruction. Move materials in accordance with safe manual handling standards Use a Counterbalance FLT Measuring and cutting metals for door construction Assist Welders Paint and prep plates, guides, etc Complete basic assembly tasks. Assembly and dismantling of racking Keeping site tidy and safe Loading, lifting and tidy up of stores area General tidy up of metal products both in yard and factory site General labouring tasks detailed by the Production Controller. Sorting and packing goods in a factory yard Working both inside and outside Helping as a floater where and when required in the site within manufacturing areas The person Must be happy working inside and outside in a factory yard Have Labouring experience in a similar environment - please note that this is a factory environment and not a construction site Have previous measuring and cutting experience in particular with metals Be able to lift and load Hold a Counterbalance Forklift licence Be able to work unsupervised Be able to work on own initiative This role will be permanent for the right person
JA1334 - Generator Engineer - Depot Location - Uxbridge Type - Permanent - 40 hours. Salary - Upto £33K DOE Overview: We are currently recruiting for a Depot based Generator Engineer to join our client's hire business. The successful candidate will support the smooth and efficient day to day running of the depot engineering operation. The position required a good level of professional communication both internally with colleagues and customers alike.You are required to complete daily tasks in accordance with the hire demands set by the front office. The day-to-day operations consist mainly of T&R with the addition of offline maintenance when skill set is available or suitable. Responsibilities: You must ensure you have the correct PPE and it is fit for purpose. Report all accidents, spills & near misses accurately and in a timely manner to the line manager using the correct reporting method. Carry out any checks assigned to you that are stored in the WPSR. Responsible for Test and Run in the depot and assist with the offline maintenance. Support the stores stocking levels and advise of low levels when consuming the parts. Ensure all company property is looked after and in calibration date where appropriate; (Multi-meter, Clamp meter, RCD tester, Insulation resistance tester) Aim to complete your jobs per week target in line with KPI's. Get involved in depot toolbox talks and keep up to date with training that will benefit. Maintain good housekeeping standards. Ensure all environmental waste generated is disposed of in the correct bins and tanks. Ensure your personal and company tools are used correctly and looked after. Any other ad hoc duties as defined by your line manager. Skills & Experience: Essential NVQ L3 or City and Guilds equivalent in electrical and/or mechanical engineering or equivalent in power generator engineering/similar industry experience. Product knowledge and experience of assessing and fault finding on Power Generation equipment. Full driving licence Forklift truck licence (can be trained) Willingness to travel to various sites and flexibility on daily working hours. Always look to achieve the objectives that have been set. Delivery of KPIs, weekly targets against plan (timing, quality & standards) Skills Required: Basic IT computer skills. Ability to communicate confidently in a professional manner. To liaise and communicate effectively with all levels of staff. Self-motivated and positive with the ability to work under pressure. Ability to carry out lone working and work as part a team. Benefits: Our client has an extensive benefits package including but not restricted to: Pension Life Assurance Hire discounts. Healthcare cashback plan MyDiscounts Long service awards
May 01, 2024
Full time
JA1334 - Generator Engineer - Depot Location - Uxbridge Type - Permanent - 40 hours. Salary - Upto £33K DOE Overview: We are currently recruiting for a Depot based Generator Engineer to join our client's hire business. The successful candidate will support the smooth and efficient day to day running of the depot engineering operation. The position required a good level of professional communication both internally with colleagues and customers alike.You are required to complete daily tasks in accordance with the hire demands set by the front office. The day-to-day operations consist mainly of T&R with the addition of offline maintenance when skill set is available or suitable. Responsibilities: You must ensure you have the correct PPE and it is fit for purpose. Report all accidents, spills & near misses accurately and in a timely manner to the line manager using the correct reporting method. Carry out any checks assigned to you that are stored in the WPSR. Responsible for Test and Run in the depot and assist with the offline maintenance. Support the stores stocking levels and advise of low levels when consuming the parts. Ensure all company property is looked after and in calibration date where appropriate; (Multi-meter, Clamp meter, RCD tester, Insulation resistance tester) Aim to complete your jobs per week target in line with KPI's. Get involved in depot toolbox talks and keep up to date with training that will benefit. Maintain good housekeeping standards. Ensure all environmental waste generated is disposed of in the correct bins and tanks. Ensure your personal and company tools are used correctly and looked after. Any other ad hoc duties as defined by your line manager. Skills & Experience: Essential NVQ L3 or City and Guilds equivalent in electrical and/or mechanical engineering or equivalent in power generator engineering/similar industry experience. Product knowledge and experience of assessing and fault finding on Power Generation equipment. Full driving licence Forklift truck licence (can be trained) Willingness to travel to various sites and flexibility on daily working hours. Always look to achieve the objectives that have been set. Delivery of KPIs, weekly targets against plan (timing, quality & standards) Skills Required: Basic IT computer skills. Ability to communicate confidently in a professional manner. To liaise and communicate effectively with all levels of staff. Self-motivated and positive with the ability to work under pressure. Ability to carry out lone working and work as part a team. Benefits: Our client has an extensive benefits package including but not restricted to: Pension Life Assurance Hire discounts. Healthcare cashback plan MyDiscounts Long service awards
The Opportunity: Field Forklift Engineer Contract: Permanent Location: Dewsbury Salary: up to £36,000 Forkway are one of the UK's leading materials handling solutions providers with around 100 employees across three Handling Centres and a number of strategic service centres. The Impact you will have: To undertake the repair & maintenance of industrial, agricultural and warehousing trucks and ancillary equipment, ensuring maximum profitability and return. To carry out fault diagnosis to identify reported breakdowns To ensure all damage and faults are highlighted to customers and recorded accurately on appropriate Forkway documentation To provide a professional, efficient & responsive service support to customers by means of maintaining & repairing materials handling equipment to the highest standard whilst observing Health and Safety regulations at all times To accurately complete all paperwork required within the role including servicing sheets, breakdown reports, accident reports, timesheets, quotes etc in a timely fashion To work closely with the sales team, informing them of any potential leads and to participate in site surveys and site meetings as and when required What will help you to excel in this role: The position requires that the employee must have a minimum of 2 years experience as an Engineer Be proficient in reading both electrical and IC truck wiring diagrams Be able to strip and reassemble a hydraulic valve bank, cylinder and gear pumps Be able to interpret the test information for main, forward /reverse clutch, torque converter pressure and carry out a full stall test What you can expect from us: Negotiable base salary Future development and career opportunities Contributory pension scheme Profitshare bonus based on business performance What's next If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met
May 01, 2024
Full time
The Opportunity: Field Forklift Engineer Contract: Permanent Location: Dewsbury Salary: up to £36,000 Forkway are one of the UK's leading materials handling solutions providers with around 100 employees across three Handling Centres and a number of strategic service centres. The Impact you will have: To undertake the repair & maintenance of industrial, agricultural and warehousing trucks and ancillary equipment, ensuring maximum profitability and return. To carry out fault diagnosis to identify reported breakdowns To ensure all damage and faults are highlighted to customers and recorded accurately on appropriate Forkway documentation To provide a professional, efficient & responsive service support to customers by means of maintaining & repairing materials handling equipment to the highest standard whilst observing Health and Safety regulations at all times To accurately complete all paperwork required within the role including servicing sheets, breakdown reports, accident reports, timesheets, quotes etc in a timely fashion To work closely with the sales team, informing them of any potential leads and to participate in site surveys and site meetings as and when required What will help you to excel in this role: The position requires that the employee must have a minimum of 2 years experience as an Engineer Be proficient in reading both electrical and IC truck wiring diagrams Be able to strip and reassemble a hydraulic valve bank, cylinder and gear pumps Be able to interpret the test information for main, forward /reverse clutch, torque converter pressure and carry out a full stall test What you can expect from us: Negotiable base salary Future development and career opportunities Contributory pension scheme Profitshare bonus based on business performance What's next If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met
Service Engineer (Specialist Training/35 Hour Week) Home Based: Park Royal, Wembley, Ealing, Harrow, Edgware, Greenford, Southall or surrounding areas £30,000 - £35,000 + Overtime (OTE £40K - £45K) + Full Training + Progression + Van & Fuel Card + 35 Hour Week + Excellent Company Benefits Are you from a Mechanical or Electrical background? Do you have fault finding experience? Are you looking to work for a market leader that provides full specialist training and further career development?On offer is the chance to develop your skills and experience with a well established business who are looking to provide a successful candidate with full training and plenty of overtime to boost their annual earnings. This family run company are going through a period of rapid expansion and they're looking to add to their team of Service Engineers to keep up with the growing demand of their clients.As a Tail Lift Engineer you will carry out tail lift and automatic shutter repairs as well as independent electrical fault finding and general vehicle maintenance. This is a Monday to Friday role with any additional hours paid at a premium.This role would suit an Engineer from a Mechanical or Electrical background looking to significantly increase their earnings through overtime whilst benefiting from full training and ongoing career growth. The Role: Tail lift and automatic shutter fault finding and repair. General vehicle maintenance. Monday to Friday, 35 Hour Week. Full training and overtime. The Person: Mechanical, Electrical background. Mechanic, electrical fault finding, forklift, plant repair experience beneficial. Looking to upskill through training. Looking for overtime to boost annual earnings. Reference Number: BBBH223748To apply for this role or to be considered for further roles, please click "Apply Now" or contact Jacob Dover at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
May 01, 2024
Full time
Service Engineer (Specialist Training/35 Hour Week) Home Based: Park Royal, Wembley, Ealing, Harrow, Edgware, Greenford, Southall or surrounding areas £30,000 - £35,000 + Overtime (OTE £40K - £45K) + Full Training + Progression + Van & Fuel Card + 35 Hour Week + Excellent Company Benefits Are you from a Mechanical or Electrical background? Do you have fault finding experience? Are you looking to work for a market leader that provides full specialist training and further career development?On offer is the chance to develop your skills and experience with a well established business who are looking to provide a successful candidate with full training and plenty of overtime to boost their annual earnings. This family run company are going through a period of rapid expansion and they're looking to add to their team of Service Engineers to keep up with the growing demand of their clients.As a Tail Lift Engineer you will carry out tail lift and automatic shutter repairs as well as independent electrical fault finding and general vehicle maintenance. This is a Monday to Friday role with any additional hours paid at a premium.This role would suit an Engineer from a Mechanical or Electrical background looking to significantly increase their earnings through overtime whilst benefiting from full training and ongoing career growth. The Role: Tail lift and automatic shutter fault finding and repair. General vehicle maintenance. Monday to Friday, 35 Hour Week. Full training and overtime. The Person: Mechanical, Electrical background. Mechanic, electrical fault finding, forklift, plant repair experience beneficial. Looking to upskill through training. Looking for overtime to boost annual earnings. Reference Number: BBBH223748To apply for this role or to be considered for further roles, please click "Apply Now" or contact Jacob Dover at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
We are delighted to be working with an exceptional company who specialise in the design and manufacture of bespoke mechanical systems.They are currently looking to recruit a Service Engineer to carry out installations and maintenance of their equipment at sites across the UK.Initially focused on UK coverage, but as the team expands, the responsibility will transition to a territory-based approach.Role Description:Installation and maintenance of customised bespoke lifting equipment.Handling breakdowns, repairs, and preventive maintenance tasks.Conducting LOLER testing.Collaborate with a team to install specialised lifting equipment like goods lifts and scissor tables.Perform efficient diagnosis and repair of goods lifts, scissor tables, and mobile lifting equipment.Identify preventive maintenance requirements and execute them effectively for both customers and the company.Availability for overtime when necessary to meet business needs.Standard working hours are typically 8 am to 5 pm, Monday to Friday.Willingness to travel during weekdays, averaging approximately 2-3 weeks per month, from Monday to Friday.Experienced required:Proficiency in hydraulic and mechanical systems.Knowledge of electrical systems, including 3-phase connections, customer supply, and 24V controls.Strong customer communication skills.Possession of a CSCS card.Licenses for operating FLT (Forklift Truck) and MEWP (Mobile Elevating Work Platform).Experience with LOLER (Lifting Operations and Lifting Equipment Regulations).You will receive:Competitive SalaryFlexible working hoursCompany uniform and overalls.Company van.Company-provided mobile phone and laptop.Training opportunities to address any skill gaps.23 days annual leave + BHParticipation in a 5% employee and 3% company contribution pension scheme.
May 01, 2024
Full time
We are delighted to be working with an exceptional company who specialise in the design and manufacture of bespoke mechanical systems.They are currently looking to recruit a Service Engineer to carry out installations and maintenance of their equipment at sites across the UK.Initially focused on UK coverage, but as the team expands, the responsibility will transition to a territory-based approach.Role Description:Installation and maintenance of customised bespoke lifting equipment.Handling breakdowns, repairs, and preventive maintenance tasks.Conducting LOLER testing.Collaborate with a team to install specialised lifting equipment like goods lifts and scissor tables.Perform efficient diagnosis and repair of goods lifts, scissor tables, and mobile lifting equipment.Identify preventive maintenance requirements and execute them effectively for both customers and the company.Availability for overtime when necessary to meet business needs.Standard working hours are typically 8 am to 5 pm, Monday to Friday.Willingness to travel during weekdays, averaging approximately 2-3 weeks per month, from Monday to Friday.Experienced required:Proficiency in hydraulic and mechanical systems.Knowledge of electrical systems, including 3-phase connections, customer supply, and 24V controls.Strong customer communication skills.Possession of a CSCS card.Licenses for operating FLT (Forklift Truck) and MEWP (Mobile Elevating Work Platform).Experience with LOLER (Lifting Operations and Lifting Equipment Regulations).You will receive:Competitive SalaryFlexible working hoursCompany uniform and overalls.Company van.Company-provided mobile phone and laptop.Training opportunities to address any skill gaps.23 days annual leave + BHParticipation in a 5% employee and 3% company contribution pension scheme.
We are delighted to be working with an exceptional company who specialise in the design and manufacture of bespoke mechanical systems.They are currently looking to recruit a Service Engineer to carry out installations and maintenance of their equipment at sites across the UK.Initially focused on UK coverage, but as the team expands, the responsibility will transition to a territory-based approach.Role Description:Installation and maintenance of customised bespoke lifting equipment.Handling breakdowns, repairs, and preventive maintenance tasks.Conducting LOLER testing.Collaborate with a team to install specialised lifting equipment like goods lifts and scissor tables.Perform efficient diagnosis and repair of goods lifts, scissor tables, and mobile lifting equipment.Identify preventive maintenance requirements and execute them effectively for both customers and the company.Availability for overtime when necessary to meet business needs.Standard working hours are typically 8 am to 5 pm, Monday to Friday.Willingness to travel during weekdays, averaging approximately 2-3 weeks per month, from Monday to Friday.Experienced required:Proficiency in hydraulic and mechanical systems.Knowledge of electrical systems, including 3-phase connections, customer supply, and 24V controls.Strong customer communication skills.Possession of a CSCS card.Licenses for operating FLT (Forklift Truck) and MEWP (Mobile Elevating Work Platform).Experience with LOLER (Lifting Operations and Lifting Equipment Regulations).You will receive:Competitive SalaryFlexible working hoursCompany uniform and overalls.Company van.Company-provided mobile phone and laptop.Training opportunities to address any skill gaps.23 days annual leave + BHParticipation in a 5% employee and 3% company contribution pension scheme.
May 01, 2024
Full time
We are delighted to be working with an exceptional company who specialise in the design and manufacture of bespoke mechanical systems.They are currently looking to recruit a Service Engineer to carry out installations and maintenance of their equipment at sites across the UK.Initially focused on UK coverage, but as the team expands, the responsibility will transition to a territory-based approach.Role Description:Installation and maintenance of customised bespoke lifting equipment.Handling breakdowns, repairs, and preventive maintenance tasks.Conducting LOLER testing.Collaborate with a team to install specialised lifting equipment like goods lifts and scissor tables.Perform efficient diagnosis and repair of goods lifts, scissor tables, and mobile lifting equipment.Identify preventive maintenance requirements and execute them effectively for both customers and the company.Availability for overtime when necessary to meet business needs.Standard working hours are typically 8 am to 5 pm, Monday to Friday.Willingness to travel during weekdays, averaging approximately 2-3 weeks per month, from Monday to Friday.Experienced required:Proficiency in hydraulic and mechanical systems.Knowledge of electrical systems, including 3-phase connections, customer supply, and 24V controls.Strong customer communication skills.Possession of a CSCS card.Licenses for operating FLT (Forklift Truck) and MEWP (Mobile Elevating Work Platform).Experience with LOLER (Lifting Operations and Lifting Equipment Regulations).You will receive:Competitive SalaryFlexible working hoursCompany uniform and overalls.Company van.Company-provided mobile phone and laptop.Training opportunities to address any skill gaps.23 days annual leave + BHParticipation in a 5% employee and 3% company contribution pension scheme.
Pertemps Birmingham Industrial
West Bromwich, West Midlands
Group Maintenance EngineerBirmingham£45,000-£50,000KFull Time Are you a Group Maintenance Engineer seeking an exciting new opportunity to showcase your skills?My client is a leading manufacturing, distribution and installation business who is seeking a group maintenance engineer to join the team and oversee the functionality of the facilities at their new site in Birmingham. Role and Responsibilities: " Provide technical support for installation and maintenance." Develop and implement preventive maintenance programs to minimise downtime and enhance productivity." Monitor equipment performance and suggest improvements." Troubleshoot and resolve equipment malfunctions promptly." Conduct equipment upgrades as necessary." Stay updated with new technologies and processes." Ensure compliance with statutory requirements." Maintain comprehensive documentation for reference." Test and approve new equipment." Manage contractors and assist with equipment evaluations." Maintain critical spares and tools." Train staff and manage budgets." Generate reports and KPIs. Key Skills/Attributes: " 7+ years' experience as a time-served electromechanical engineer." Must have 18th edition electrical qualification. " Experience in the steel processing industry preferred." Strong electromechanical diagnostic skills." Proficiency in service and repair of various equipment." Ability to work independently or as part of a team." Flexible to work out-of-hours as required." Strong communication and collaboration skills." Proficient in Microsoft Office Excel." Fluent in English, both written and verbal." Clean UK driving license and forklift license." IOSH or NEBOSH qualification preferable. Salary & Benefits " £45,000- £50,000 per year" Company pension" Free onsite parkingIf you're ready to challenge convention and shape the future of this industry, then apply today. Contact Jodie Hodgson at the Pertemps Birmingham Industrial Hagley Road.
May 01, 2024
Full time
Group Maintenance EngineerBirmingham£45,000-£50,000KFull Time Are you a Group Maintenance Engineer seeking an exciting new opportunity to showcase your skills?My client is a leading manufacturing, distribution and installation business who is seeking a group maintenance engineer to join the team and oversee the functionality of the facilities at their new site in Birmingham. Role and Responsibilities: " Provide technical support for installation and maintenance." Develop and implement preventive maintenance programs to minimise downtime and enhance productivity." Monitor equipment performance and suggest improvements." Troubleshoot and resolve equipment malfunctions promptly." Conduct equipment upgrades as necessary." Stay updated with new technologies and processes." Ensure compliance with statutory requirements." Maintain comprehensive documentation for reference." Test and approve new equipment." Manage contractors and assist with equipment evaluations." Maintain critical spares and tools." Train staff and manage budgets." Generate reports and KPIs. Key Skills/Attributes: " 7+ years' experience as a time-served electromechanical engineer." Must have 18th edition electrical qualification. " Experience in the steel processing industry preferred." Strong electromechanical diagnostic skills." Proficiency in service and repair of various equipment." Ability to work independently or as part of a team." Flexible to work out-of-hours as required." Strong communication and collaboration skills." Proficient in Microsoft Office Excel." Fluent in English, both written and verbal." Clean UK driving license and forklift license." IOSH or NEBOSH qualification preferable. Salary & Benefits " £45,000- £50,000 per year" Company pension" Free onsite parkingIf you're ready to challenge convention and shape the future of this industry, then apply today. Contact Jodie Hodgson at the Pertemps Birmingham Industrial Hagley Road.
Pyramid8 are currently supporting and exciting and growing business who operate in the live performance sectors. They are recruiting for an Inspection Engineer with experience of electrical inspections, you will deliver day to day delivery of electrical testing and inspections. They are a small friendly company who are growing and looking for an enthusiastic individual who will work with an experienced team of individuals working in the live production sectors. Working with Theatres, Schools, Exhibition Centres to provide high quality lighting and sound solutions. The role is based in Sherburn however you will be expected to travel and there will be some out of hours work and overnight stays. They will also consider an individual who lives in the North West Area. This Role is subject to a DBS Check Key responsibilities: Carrying out scheduled inspections (EICR and PAT) Assisting with LOLER and PUWER inspections Completion of associated reports Assisting with reactive maintenance and repairs Assisting with installation project Person specification In order to meet these responsibilities the post holder must have the following skills: be able to prioritise tasks to meet strict deadlines be able to demonstrate good written and verbal communication skills be self-motivated and able to manage their own workload to achieve agreed objectives be able to work alone, and as part of a larger team be able to think creatively to provide practical solutions for customers have excellent customer service skills exhibit a high level of attention to detail be able to demonstrate a good understanding of electrical systems used on stages be able to fault find sound, lighting and video systems be practical and hands on In order to meet these responsibilities the post holder must have the following personal attributes : be willing to demonstrate the company's values to achieve the company's objectives be confident in dealing with a wide range of people be presentable at all times be prepared to be flexible as the job demands, with a 'can-do' attitude be friendly with a good sense of humour In order to meet these responsibilities the post holder must be able to demonstrate: a current, full UK driving license an electrical qualification (City & Guilds 2391, City & Guilds 2377 or similar) a good level of IT literacy basic numeracy and literacy skills It would also be advantageous, but not essential, for the post holder to have: experience within the entertainment industry a good understanding of lifting systems and equipment used on stages a valid CSCS card up to date IPAF, PASMA and counterbalance forklift licenses PAT qualification
May 01, 2024
Full time
Pyramid8 are currently supporting and exciting and growing business who operate in the live performance sectors. They are recruiting for an Inspection Engineer with experience of electrical inspections, you will deliver day to day delivery of electrical testing and inspections. They are a small friendly company who are growing and looking for an enthusiastic individual who will work with an experienced team of individuals working in the live production sectors. Working with Theatres, Schools, Exhibition Centres to provide high quality lighting and sound solutions. The role is based in Sherburn however you will be expected to travel and there will be some out of hours work and overnight stays. They will also consider an individual who lives in the North West Area. This Role is subject to a DBS Check Key responsibilities: Carrying out scheduled inspections (EICR and PAT) Assisting with LOLER and PUWER inspections Completion of associated reports Assisting with reactive maintenance and repairs Assisting with installation project Person specification In order to meet these responsibilities the post holder must have the following skills: be able to prioritise tasks to meet strict deadlines be able to demonstrate good written and verbal communication skills be self-motivated and able to manage their own workload to achieve agreed objectives be able to work alone, and as part of a larger team be able to think creatively to provide practical solutions for customers have excellent customer service skills exhibit a high level of attention to detail be able to demonstrate a good understanding of electrical systems used on stages be able to fault find sound, lighting and video systems be practical and hands on In order to meet these responsibilities the post holder must have the following personal attributes : be willing to demonstrate the company's values to achieve the company's objectives be confident in dealing with a wide range of people be presentable at all times be prepared to be flexible as the job demands, with a 'can-do' attitude be friendly with a good sense of humour In order to meet these responsibilities the post holder must be able to demonstrate: a current, full UK driving license an electrical qualification (City & Guilds 2391, City & Guilds 2377 or similar) a good level of IT literacy basic numeracy and literacy skills It would also be advantageous, but not essential, for the post holder to have: experience within the entertainment industry a good understanding of lifting systems and equipment used on stages a valid CSCS card up to date IPAF, PASMA and counterbalance forklift licenses PAT qualification
Pyramid8 are currently supporting and exciting and growing business who operate in the live performance sectors. They are recruiting for an Inspection Engineer with experience of lifting inspections, you will deliver day to day delivery of lifting and mechanical testing and inspections. They are a small friendly company who are growing and looking for an enthusiastic individual who will work with an experienced team of individuals working in the live production sectors. Working with Theatres, Schools, Exhibition Centres to provide high quality lighting and sound solutions. The role is based in Sherburn however you will be expected to travel and there will be some out of hours work and overnight stays. This Role is subject to a DBS Check Key responsibilities: Carrying out scheduled inspections (LOLER and PUWER) Assisting with EICR and PAT inspections Completion of associated reports Assisting with reactive maintenance and repairs Assisting with installation projects Person specification In order to meet these responsibilities the post holder must have the following skills: be able to prioritise tasks to meet strict deadlines be able to demonstrate good written and verbal communication skills be self-motivated and able to manage their own workload to achieve agreed objectives be able to work alone, and as part of a larger team be able to think creatively to provide practical solutions for customers have excellent customer service skills exhibit a high level of attention to detail be able to demonstrate a good understanding of lifting systems and equipment used on stages be practical and hands on In order to meet these responsibilities the post holder must have the following personal attributes: be willing to demonstrate the company's values to achieve the company's objectives be confident in dealing with a wide range of people be presentable at all times be prepared to be flexible as the job demands, with a 'can-do' attitude be friendly with a good sense of humour In order to meet these responsibilities the post holder must be able to demonstrate a current, full UK driving license Lifting Equipment Engineers Association (LEEA) Accreditation (or similar) a good level of IT literacy basic numeracy and literacy skills It would also be advantageous, but not essential, for the post holder to have: experience within the entertainment industry a good understanding of electrical systems used on stages the ability to fault find sound, lighting and video systems a valid CSCS card up to date IPAF, PASMA and counterbalance forklift licenses PAT qualification
May 01, 2024
Full time
Pyramid8 are currently supporting and exciting and growing business who operate in the live performance sectors. They are recruiting for an Inspection Engineer with experience of lifting inspections, you will deliver day to day delivery of lifting and mechanical testing and inspections. They are a small friendly company who are growing and looking for an enthusiastic individual who will work with an experienced team of individuals working in the live production sectors. Working with Theatres, Schools, Exhibition Centres to provide high quality lighting and sound solutions. The role is based in Sherburn however you will be expected to travel and there will be some out of hours work and overnight stays. This Role is subject to a DBS Check Key responsibilities: Carrying out scheduled inspections (LOLER and PUWER) Assisting with EICR and PAT inspections Completion of associated reports Assisting with reactive maintenance and repairs Assisting with installation projects Person specification In order to meet these responsibilities the post holder must have the following skills: be able to prioritise tasks to meet strict deadlines be able to demonstrate good written and verbal communication skills be self-motivated and able to manage their own workload to achieve agreed objectives be able to work alone, and as part of a larger team be able to think creatively to provide practical solutions for customers have excellent customer service skills exhibit a high level of attention to detail be able to demonstrate a good understanding of lifting systems and equipment used on stages be practical and hands on In order to meet these responsibilities the post holder must have the following personal attributes: be willing to demonstrate the company's values to achieve the company's objectives be confident in dealing with a wide range of people be presentable at all times be prepared to be flexible as the job demands, with a 'can-do' attitude be friendly with a good sense of humour In order to meet these responsibilities the post holder must be able to demonstrate a current, full UK driving license Lifting Equipment Engineers Association (LEEA) Accreditation (or similar) a good level of IT literacy basic numeracy and literacy skills It would also be advantageous, but not essential, for the post holder to have: experience within the entertainment industry a good understanding of electrical systems used on stages the ability to fault find sound, lighting and video systems a valid CSCS card up to date IPAF, PASMA and counterbalance forklift licenses PAT qualification
Do you have experience working as a Yards person ? If so read on, Adecco are proud to be working with a well established Company who are seeking a Yards Person to join their expanding team. Location: Grays Salary: £31,096 p/a Working days: Monday to Friday Working hours: 7.30am to 5pm Duration of contract: Permanent Requirements : Fork lift License You will be working outside in ALL weathers so experience in this environment is essential Duties: Driving forklift Cleaning of bunds Cleaning inside of the tanks readying for inspections Goods in and out, using the Forklift General site maintenance Manual work including cleaning and digging process areas Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
May 01, 2024
Full time
Do you have experience working as a Yards person ? If so read on, Adecco are proud to be working with a well established Company who are seeking a Yards Person to join their expanding team. Location: Grays Salary: £31,096 p/a Working days: Monday to Friday Working hours: 7.30am to 5pm Duration of contract: Permanent Requirements : Fork lift License You will be working outside in ALL weathers so experience in this environment is essential Duties: Driving forklift Cleaning of bunds Cleaning inside of the tanks readying for inspections Goods in and out, using the Forklift General site maintenance Manual work including cleaning and digging process areas Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Multi-Skilled Maintenance Engineer Hull Manufacturing 4 on 4 off days and nights £40,000 - 42,000 + overtimeGi Pro are proud to be working in partnership with a global manufacturing specialist. This company has been at the forefront of their industry for many years and offer a fantastic career path within extensive career opportunities and personal development. Job Role: As an Multi Skilled Maintenance Engineer Elec bias, you will ensure that all site, plant, and machinery is maintained in good working order and state of repair. Typical Duties will involve: Experience within an electrical maintenance environment, preferably in heavy industry / manufacturing sector Experience of working in a factory with inverters, drives, PLCs, motors & control systems Fault finding / diagnostic skills. Ability to read and understand circuit diagrams. Experience and knowledge of wiring and electrical equipment typically found in office environments. Experience working with H&S systems, lock off / tag off procedure Knowledge of pneumatic and hydraulic systems Some installation experience desirable Good communication skills Ability to comprehend and safely operate electrical and mechanical equipment. Ability to adhere to safe working procedures ensuring safety of oneself and colleagues. Desirable experience Minimum City & Guilds with 17th Edition HV experience and qualifications desirable Counterbalance forklift truck licence desirable Benefits Competitive Contributory pension scheme Annual occupational health checks 296-hours holiday, inclusive of bank holidays Apply! If you believe you have the skills apply now! Alternatively, please contact Sam Allsopp on or email for more information. GI Professional - Bullhorn only is acting as an Employment Agency in relation to this vacancy.
May 01, 2024
Full time
Multi-Skilled Maintenance Engineer Hull Manufacturing 4 on 4 off days and nights £40,000 - 42,000 + overtimeGi Pro are proud to be working in partnership with a global manufacturing specialist. This company has been at the forefront of their industry for many years and offer a fantastic career path within extensive career opportunities and personal development. Job Role: As an Multi Skilled Maintenance Engineer Elec bias, you will ensure that all site, plant, and machinery is maintained in good working order and state of repair. Typical Duties will involve: Experience within an electrical maintenance environment, preferably in heavy industry / manufacturing sector Experience of working in a factory with inverters, drives, PLCs, motors & control systems Fault finding / diagnostic skills. Ability to read and understand circuit diagrams. Experience and knowledge of wiring and electrical equipment typically found in office environments. Experience working with H&S systems, lock off / tag off procedure Knowledge of pneumatic and hydraulic systems Some installation experience desirable Good communication skills Ability to comprehend and safely operate electrical and mechanical equipment. Ability to adhere to safe working procedures ensuring safety of oneself and colleagues. Desirable experience Minimum City & Guilds with 17th Edition HV experience and qualifications desirable Counterbalance forklift truck licence desirable Benefits Competitive Contributory pension scheme Annual occupational health checks 296-hours holiday, inclusive of bank holidays Apply! If you believe you have the skills apply now! Alternatively, please contact Sam Allsopp on or email for more information. GI Professional - Bullhorn only is acting as an Employment Agency in relation to this vacancy.
Experienced field service engineer required. My client is a truck mounted hydraulic equipment specialist and require a field service engineer to cover South East of England. The role will involve maintaining, servicing and repairing a range of load handling equipment; including truck-mounted forklifts and truck-mounted cranes. It is essential the right candidate has past experience and knowledge in a similar role. This role requires a manual driving licence Field Service Engineer Position Overview Maintaining, servicing and repairing a range of crane mounted vehicles, HIAB and truck mounted forklifts Travelling throughout the South East of England (M25 corridor) Fault finding, diagnosis and rectification on customer equipment Maintaining up to date service records Working on the companies range of material handling equipment Field Service Engineer Position Requirements Strong experience of working with mechanical, electrical and hydraulic systems Good knowledge and past experience of servicing and maintaining crane mounted and truck mounted forklifts is a must Flexible with travel and working hours A valid UK driving licence Good organisational skills Excellent planning, organisation, and time management skills Field Service Engineer Position Remuneration £40,000 salary 45-hour week (Mon-Fri 8am-5pm) Door to door pay Overtime available (Time and a half) 28 days holiday inclusive of bank holidays Company van, laptop and phone provided Pension Ongoing training and future development Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer. JBRP1_UKTJ
May 01, 2024
Full time
Experienced field service engineer required. My client is a truck mounted hydraulic equipment specialist and require a field service engineer to cover South East of England. The role will involve maintaining, servicing and repairing a range of load handling equipment; including truck-mounted forklifts and truck-mounted cranes. It is essential the right candidate has past experience and knowledge in a similar role. This role requires a manual driving licence Field Service Engineer Position Overview Maintaining, servicing and repairing a range of crane mounted vehicles, HIAB and truck mounted forklifts Travelling throughout the South East of England (M25 corridor) Fault finding, diagnosis and rectification on customer equipment Maintaining up to date service records Working on the companies range of material handling equipment Field Service Engineer Position Requirements Strong experience of working with mechanical, electrical and hydraulic systems Good knowledge and past experience of servicing and maintaining crane mounted and truck mounted forklifts is a must Flexible with travel and working hours A valid UK driving licence Good organisational skills Excellent planning, organisation, and time management skills Field Service Engineer Position Remuneration £40,000 salary 45-hour week (Mon-Fri 8am-5pm) Door to door pay Overtime available (Time and a half) 28 days holiday inclusive of bank holidays Company van, laptop and phone provided Pension Ongoing training and future development Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer. JBRP1_UKTJ
Professional Technical Ltd
Northampton, Northamptonshire
My client is a UK leading dealer for one of the biggest brands within the forklift sector and they are on the search for a Field Service Engineer to join their team. If you are an engineer who wants to work on exciting products with opportunities to train, up skill, and expand your knowledge, then this role could be for you. As a Field Service Engineer, you will be covering Northampton and surrounding areas, carrying out general maintenance, and repairs, and servicing a range of gas, diesel, and electric-powered trucks. In exchange, you will receive a fantastic package which will include a salary of up to £36k (OTE £40k+), a company van with specialist tools included, 23 days holidays + bank holidays, laptop & mobile phone, full product training, and development program and much more. We will consider engineers from the following backgrounds: forklift trucks, heavy plant, agriculture, and/or powered access. Job Summary: Reporting to the Service Manager, this role as a Field Service Engineer will be expected to be in control of the maintenance, service, and repairs of material handling equipment on various customer sites. As a Field Service Engineer, you will be working with an assortment of equipment including diesel, gas, and electric. You will be expected to manage your own work in progress, ensure all relevant paperwork is completed accurately, attend regular training courses to maintain up-to-date knowledge of equipment, and be an active team player sustaining the company's prestigious reputation. Requirements: NVQ Level 2/3 qualified in Plant, Vehicle Maintenance or similar Preferably served a full apprenticeship Experienced Plant Fitter, FLT Engineer, Vehicle Technician, HGV Technician or Ex forces will all be considered for this opportunity Technical experience in Engines, Electrics and Diagnostics is compulsory. Hydraulics and all other engine types are required also. Salary and Benefits: Salary circa up to £36k (OTE £40k+) Day shifts - Monday to Friday Annual Bonus Comprehensive induction scheme Company Van Overtime available at 1.5 hours (2.0 hours Sundays & Bank Holidays) Call-out (1 in 9) Laptop & Mobile Specialist tools & PPE Full Training and development Enhanced Parental Policies Life Assurance of 2x salary Employee Welfare Scheme - Vouchers for birthdays/weddings/children/studies/long service Enhanced Parental Policies If you would like to apply or get more information, then please click 'apply' below. Contact me via or JBRP1_UKTJ
May 01, 2024
Full time
My client is a UK leading dealer for one of the biggest brands within the forklift sector and they are on the search for a Field Service Engineer to join their team. If you are an engineer who wants to work on exciting products with opportunities to train, up skill, and expand your knowledge, then this role could be for you. As a Field Service Engineer, you will be covering Northampton and surrounding areas, carrying out general maintenance, and repairs, and servicing a range of gas, diesel, and electric-powered trucks. In exchange, you will receive a fantastic package which will include a salary of up to £36k (OTE £40k+), a company van with specialist tools included, 23 days holidays + bank holidays, laptop & mobile phone, full product training, and development program and much more. We will consider engineers from the following backgrounds: forklift trucks, heavy plant, agriculture, and/or powered access. Job Summary: Reporting to the Service Manager, this role as a Field Service Engineer will be expected to be in control of the maintenance, service, and repairs of material handling equipment on various customer sites. As a Field Service Engineer, you will be working with an assortment of equipment including diesel, gas, and electric. You will be expected to manage your own work in progress, ensure all relevant paperwork is completed accurately, attend regular training courses to maintain up-to-date knowledge of equipment, and be an active team player sustaining the company's prestigious reputation. Requirements: NVQ Level 2/3 qualified in Plant, Vehicle Maintenance or similar Preferably served a full apprenticeship Experienced Plant Fitter, FLT Engineer, Vehicle Technician, HGV Technician or Ex forces will all be considered for this opportunity Technical experience in Engines, Electrics and Diagnostics is compulsory. Hydraulics and all other engine types are required also. Salary and Benefits: Salary circa up to £36k (OTE £40k+) Day shifts - Monday to Friday Annual Bonus Comprehensive induction scheme Company Van Overtime available at 1.5 hours (2.0 hours Sundays & Bank Holidays) Call-out (1 in 9) Laptop & Mobile Specialist tools & PPE Full Training and development Enhanced Parental Policies Life Assurance of 2x salary Employee Welfare Scheme - Vouchers for birthdays/weddings/children/studies/long service Enhanced Parental Policies If you would like to apply or get more information, then please click 'apply' below. Contact me via or JBRP1_UKTJ
Duties/ Responsibilities SAP MRP system monitoring levels and adjusting to history profile. To advise the Section Leader/ Assistant Section Leader of stock discrepancies and shortages, maintaining stock at agreed levels. To determine proper floor and shelf locations for supplies. Take receipt of goods and undertake necessary checks on such and associated documentation, reference quality, quantity and condition as received. To control and issue inventory, as well as process and maintain inventory records and perform related work. To control, issue and return powered tools stock. To maintain a professional, polite and courteous manner whilst dealing with internal and external customers. To promote a high level of quality and safety within the department. To ensure working practices are adhered to and good housekeeping procedures are maintained. To despatch and control equipment for repair, providing all documentation relevant to destination, the control and recording of all information for traceability and cost control. Provide customs and procedural documentation to be able to ship goods outside of the United kingdom. Manage and arrange despatch of goods during breakdown situations. To deal with general/specific queries and projects from all internal customers. To organise and report weekly, monthly and annual facts and figures as required by the Stores Section Leader/ Assistant Section Leader. To provide support to analyse stock movements, for maintenance and provide additional stock requests for planned events To introduce new stock and ensure correct identification in line with group guidelines. To administrate information between software and other relevant departments Electronically recording movements between MM-PM, while liaising with PM control regarding the introduction of new equipment. To ensure security of stock and control entry to the engineering stores department. To audit Engineering Stores tools and consumables each shift. To attend training courses and meetings as necessary. To demonstrate professional competence and development by keeping skills up to date and in providing evidence of continuing professional and technical development. To follow all Company Safety Systems as detailed in Health and Safety Manual and assessments. Special Tasks To undertake any other reasonable task as commensurate with the position. One day Health & Safety course. Driving Licence Forklift Truck B1 licence Reach Truck D1 Side Loader C1 Electric Pallet Truck Crane Hook and Attachments Fire Warden Manual Handling Forklift Truck B3 (Desirable) MEWP (Desirable) Necessary Skills and Competencies Experience of SAP systems. Stock Auditing and Control Mechanical / Electrical Parts Experience Good standard of IT skills and competent use of Microsoft Office Products (Word, Excel, Outlook, Sharepoint). Experience in an engineering stores related role. Reasonable standard of secondary education. Must be well organised, efficient. Be able to react to unpredictable events and provide support for the engineering function. Have good time management skills. Work independently and manage own workload. Be able to provide cover for holiday and absence when required. JBRP1_UKTJ
May 01, 2024
Full time
Duties/ Responsibilities SAP MRP system monitoring levels and adjusting to history profile. To advise the Section Leader/ Assistant Section Leader of stock discrepancies and shortages, maintaining stock at agreed levels. To determine proper floor and shelf locations for supplies. Take receipt of goods and undertake necessary checks on such and associated documentation, reference quality, quantity and condition as received. To control and issue inventory, as well as process and maintain inventory records and perform related work. To control, issue and return powered tools stock. To maintain a professional, polite and courteous manner whilst dealing with internal and external customers. To promote a high level of quality and safety within the department. To ensure working practices are adhered to and good housekeeping procedures are maintained. To despatch and control equipment for repair, providing all documentation relevant to destination, the control and recording of all information for traceability and cost control. Provide customs and procedural documentation to be able to ship goods outside of the United kingdom. Manage and arrange despatch of goods during breakdown situations. To deal with general/specific queries and projects from all internal customers. To organise and report weekly, monthly and annual facts and figures as required by the Stores Section Leader/ Assistant Section Leader. To provide support to analyse stock movements, for maintenance and provide additional stock requests for planned events To introduce new stock and ensure correct identification in line with group guidelines. To administrate information between software and other relevant departments Electronically recording movements between MM-PM, while liaising with PM control regarding the introduction of new equipment. To ensure security of stock and control entry to the engineering stores department. To audit Engineering Stores tools and consumables each shift. To attend training courses and meetings as necessary. To demonstrate professional competence and development by keeping skills up to date and in providing evidence of continuing professional and technical development. To follow all Company Safety Systems as detailed in Health and Safety Manual and assessments. Special Tasks To undertake any other reasonable task as commensurate with the position. One day Health & Safety course. Driving Licence Forklift Truck B1 licence Reach Truck D1 Side Loader C1 Electric Pallet Truck Crane Hook and Attachments Fire Warden Manual Handling Forklift Truck B3 (Desirable) MEWP (Desirable) Necessary Skills and Competencies Experience of SAP systems. Stock Auditing and Control Mechanical / Electrical Parts Experience Good standard of IT skills and competent use of Microsoft Office Products (Word, Excel, Outlook, Sharepoint). Experience in an engineering stores related role. Reasonable standard of secondary education. Must be well organised, efficient. Be able to react to unpredictable events and provide support for the engineering function. Have good time management skills. Work independently and manage own workload. Be able to provide cover for holiday and absence when required. JBRP1_UKTJ
Maintenance Engineer (Multiskilled Training) £39,000 - £40,000 + Days Only, Monday to Friday + Multiskilled Training + Career Progression + Overtime + Holiday + Pension Factory based, commutable from Ilminster, Taunton, Chard, Crewkerne, Yeovil, Wellington, Martock, Langport Shifts: Monday to friday, 8am - 5pm Are you a Maintenance Engineer looking for a days based role that can offer a better work life balance working with days only shifts. The company can also provide exceptional training to become a highly skilled Multi Skilled Engineer while offering genuine opportunities for career progression This is a fantastic opportunity to become fully trained in both mechanical and electrical systems while working on state of the art machinery in a large manufacturing site. This while being offered clear routes of progression and overtime to increase your basic earnings and develop your career. This business is the leading supplier and distributor of raw materials sold into the food industry across the UK and worldwide. They have grown rapidly since their founding and are still thriving through this period of economic uncertainty, investing heavily back into the business. Due to this they are looking for a motivated Maintenance Engineer to join their team to offer a fresh and innovative approach within onsite maintenance. In this role, you will play a key part in all onsite preventive and reactive maintenance ranging from fault finding, diagnostics and breakdown repairs. The position will give you autonomy across all aspects of maintenance and new machinery implementation as well as training opportunities within confined space, forklifts and cherry pickers to increase your technical skills. The role is days based with great training and progression opportunities. This role would suit a Mechanical / Electrical Maintenance/ Multi Skilled Engineer looking to expand their skillset within a market leading company offering genuine opportunities for career progression. The Role: Multi Skilled Maintenance engineer Monday to Friday, 8 to 5 Training and Career Progression Opportunities The Person: Previous Maintenance Engineer experience Broad Mechanical and or Electrical knowledge Live commutable to Ilminster Reference Number: BBBH219643 To apply for this role or to be considered for further roles, please click "Apply Now" or contact William Shaw at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
May 01, 2024
Full time
Maintenance Engineer (Multiskilled Training) £39,000 - £40,000 + Days Only, Monday to Friday + Multiskilled Training + Career Progression + Overtime + Holiday + Pension Factory based, commutable from Ilminster, Taunton, Chard, Crewkerne, Yeovil, Wellington, Martock, Langport Shifts: Monday to friday, 8am - 5pm Are you a Maintenance Engineer looking for a days based role that can offer a better work life balance working with days only shifts. The company can also provide exceptional training to become a highly skilled Multi Skilled Engineer while offering genuine opportunities for career progression This is a fantastic opportunity to become fully trained in both mechanical and electrical systems while working on state of the art machinery in a large manufacturing site. This while being offered clear routes of progression and overtime to increase your basic earnings and develop your career. This business is the leading supplier and distributor of raw materials sold into the food industry across the UK and worldwide. They have grown rapidly since their founding and are still thriving through this period of economic uncertainty, investing heavily back into the business. Due to this they are looking for a motivated Maintenance Engineer to join their team to offer a fresh and innovative approach within onsite maintenance. In this role, you will play a key part in all onsite preventive and reactive maintenance ranging from fault finding, diagnostics and breakdown repairs. The position will give you autonomy across all aspects of maintenance and new machinery implementation as well as training opportunities within confined space, forklifts and cherry pickers to increase your technical skills. The role is days based with great training and progression opportunities. This role would suit a Mechanical / Electrical Maintenance/ Multi Skilled Engineer looking to expand their skillset within a market leading company offering genuine opportunities for career progression. The Role: Multi Skilled Maintenance engineer Monday to Friday, 8 to 5 Training and Career Progression Opportunities The Person: Previous Maintenance Engineer experience Broad Mechanical and or Electrical knowledge Live commutable to Ilminster Reference Number: BBBH219643 To apply for this role or to be considered for further roles, please click "Apply Now" or contact William Shaw at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
We are looking for a Forklift Service Engineer (Field Technician) to work within our After Sales department to maintain, repair, service and modify the companies range of products. This role comes with a competitive salary, an attractive company pension, a company vehicle, and the opportunity to work for great company. About the role The role involves servicing, maintaining, and repairing forklift t click apply for full job details
May 01, 2024
Full time
We are looking for a Forklift Service Engineer (Field Technician) to work within our After Sales department to maintain, repair, service and modify the companies range of products. This role comes with a competitive salary, an attractive company pension, a company vehicle, and the opportunity to work for great company. About the role The role involves servicing, maintaining, and repairing forklift t click apply for full job details
Role: Forklift Engineer Remuneration: Up to £35k basic, Realistic OTE £47k Additional Benefits: Overtime, Vehicle, Pension, Comprehensive Training, Progression Opportunities, Benefits Portal, Health Cash Plan, Life cover. Position Forklift Engineer At Impact Handling you will be responsible for accurately diagnosing faults with machinery, servicing and emergency repairs click apply for full job details
May 01, 2024
Full time
Role: Forklift Engineer Remuneration: Up to £35k basic, Realistic OTE £47k Additional Benefits: Overtime, Vehicle, Pension, Comprehensive Training, Progression Opportunities, Benefits Portal, Health Cash Plan, Life cover. Position Forklift Engineer At Impact Handling you will be responsible for accurately diagnosing faults with machinery, servicing and emergency repairs click apply for full job details
Service Technician £ - Competitive + Monday - Friday (40 Hours, 8am-5pm) + Certified Training + Company Van + Fuel Card + Overtime Opportunities + Progression Opportunities + Call out 1 in 3 + Up to 27 days Holiday plus BH Site commutable from Burton upon Trent, Derby, Uttoxeter - Workshop and Field Based (40/60) Excellent opportunity for a multi-skilled Maintenance/Service Engineer to join an ambitious and rapidly growing company in the Agricultural sector. The company is a main dealer of JCB, and are continuously looking to grow their market share and provide excellent levels of customer service. On offer is the chance to join an industry leading company in the Agricultural sector, where you will receive excellent formal accredited training and on the job training to become a 'go-to' specialist in your field, whilst maximizing earning potential through flexible overtime. The well-established company are looking for someone to add value to their highly skilled team and learn alongside their engineers who will support them through their training. You will be given accredited training, alongside the opportunity to move across departments or progress into a managerial role. The day to day responsibilities of this role involves diagnosing machines for repair and carrying out routine maintenance on agricultural or plant equipment either out in the field covering a 10/15 mile radius of Newport, or in the workshop. You will also be required to use a phone/tablet to upload your completed work. The ideal candidate for this role will have a Mechanical and Electrical background (either a qualification or relevant apprenticeship) and ideally have experience in repairing heavy plant equipment, or forklift, heavy vehicles or diesel engines. This is a great opportunity to join an ambitious and growing company that are known to look after their employees, and be offered excellent prospects for career progression. The Role: Maintaining, servicing, and repairing Agricultural equipment Covering a 10/15 mile radius of site 40% Workshop based and 60% Field Based The Person An interest in the Agricultural Industry Mechanical or Electrical background Candidates that have experience repairing either Heavy Plant Equipment or Forklift or Vehicles or Diesel Engines or similar vehicles all considered. Keen for training and progression Full Clean UK Driver's License Reference Number: BBBH225023 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Amelia Spendlove at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
May 01, 2024
Full time
Service Technician £ - Competitive + Monday - Friday (40 Hours, 8am-5pm) + Certified Training + Company Van + Fuel Card + Overtime Opportunities + Progression Opportunities + Call out 1 in 3 + Up to 27 days Holiday plus BH Site commutable from Burton upon Trent, Derby, Uttoxeter - Workshop and Field Based (40/60) Excellent opportunity for a multi-skilled Maintenance/Service Engineer to join an ambitious and rapidly growing company in the Agricultural sector. The company is a main dealer of JCB, and are continuously looking to grow their market share and provide excellent levels of customer service. On offer is the chance to join an industry leading company in the Agricultural sector, where you will receive excellent formal accredited training and on the job training to become a 'go-to' specialist in your field, whilst maximizing earning potential through flexible overtime. The well-established company are looking for someone to add value to their highly skilled team and learn alongside their engineers who will support them through their training. You will be given accredited training, alongside the opportunity to move across departments or progress into a managerial role. The day to day responsibilities of this role involves diagnosing machines for repair and carrying out routine maintenance on agricultural or plant equipment either out in the field covering a 10/15 mile radius of Newport, or in the workshop. You will also be required to use a phone/tablet to upload your completed work. The ideal candidate for this role will have a Mechanical and Electrical background (either a qualification or relevant apprenticeship) and ideally have experience in repairing heavy plant equipment, or forklift, heavy vehicles or diesel engines. This is a great opportunity to join an ambitious and growing company that are known to look after their employees, and be offered excellent prospects for career progression. The Role: Maintaining, servicing, and repairing Agricultural equipment Covering a 10/15 mile radius of site 40% Workshop based and 60% Field Based The Person An interest in the Agricultural Industry Mechanical or Electrical background Candidates that have experience repairing either Heavy Plant Equipment or Forklift or Vehicles or Diesel Engines or similar vehicles all considered. Keen for training and progression Full Clean UK Driver's License Reference Number: BBBH225023 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Amelia Spendlove at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
Join Our Team as a Multi Skilled Maintenance Technician (Electrical Bias) Salary Range: £35,000 - £38,000 per annum Benefits: 25 days holiday Pension scheme Hours of Work: 39 hours per week Monday to Thursday: 0730am to 1630pm Friday: 0730am to 1230pm (Must be flexible) The Role: Are you ready to be an integral part of our maintenance team? As a Multi Skilled Maintenance Technician with an electrical bias, you'll play a crucial role in ensuring the smooth operation of our plant facilities. Responsibilities include: Providing comprehensive maintenance support to production to minimize downtime. Promptly responding to breakdowns. Performing planned, preventative, and reactive maintenance tasks. Identifying reliability issues, implementing root cause problem-solving, and suggesting improvements. Ensuring all machinery and equipment on-site are mechanically and electrically safe. Collaborating with external contractors when necessary. The Ideal Candidate: We're seeking a proactive individual with excellent communication and organizational skills, alongside a mandatory technical qualification in electrical discipline. Requirements: Qualified to 18th Edition Electrical regulations. Minimum 5 years' experience in a fast-paced, high-volume manufacturing environment. Ideally qualified to City & Guilds Inspection and Testing Level 3. Strong understanding/knowledge of mechanical skills. Experience maintaining hydraulic, pneumatic, and lubrication systems. Proficiency in PLC fault-finding and development. Familiarity with maintaining large Power Presses and Assembly Robots. Knowledge and experience of motor drives and panel building. Forklift and MEWP License would be desirable. Ability to prioritize tasks and manage time effectively. Commitment to Health and Safety Procedures. If you're ready to drive improvements and contribute to our dynamic team, apply now to join us on this exciting journey! Apply or call JBRP1_UKTJ
May 01, 2024
Full time
Join Our Team as a Multi Skilled Maintenance Technician (Electrical Bias) Salary Range: £35,000 - £38,000 per annum Benefits: 25 days holiday Pension scheme Hours of Work: 39 hours per week Monday to Thursday: 0730am to 1630pm Friday: 0730am to 1230pm (Must be flexible) The Role: Are you ready to be an integral part of our maintenance team? As a Multi Skilled Maintenance Technician with an electrical bias, you'll play a crucial role in ensuring the smooth operation of our plant facilities. Responsibilities include: Providing comprehensive maintenance support to production to minimize downtime. Promptly responding to breakdowns. Performing planned, preventative, and reactive maintenance tasks. Identifying reliability issues, implementing root cause problem-solving, and suggesting improvements. Ensuring all machinery and equipment on-site are mechanically and electrically safe. Collaborating with external contractors when necessary. The Ideal Candidate: We're seeking a proactive individual with excellent communication and organizational skills, alongside a mandatory technical qualification in electrical discipline. Requirements: Qualified to 18th Edition Electrical regulations. Minimum 5 years' experience in a fast-paced, high-volume manufacturing environment. Ideally qualified to City & Guilds Inspection and Testing Level 3. Strong understanding/knowledge of mechanical skills. Experience maintaining hydraulic, pneumatic, and lubrication systems. Proficiency in PLC fault-finding and development. Familiarity with maintaining large Power Presses and Assembly Robots. Knowledge and experience of motor drives and panel building. Forklift and MEWP License would be desirable. Ability to prioritize tasks and manage time effectively. Commitment to Health and Safety Procedures. If you're ready to drive improvements and contribute to our dynamic team, apply now to join us on this exciting journey! Apply or call JBRP1_UKTJ
Are you looking to work for a global leading material handling company that offer an exceptional training and development program, investing in each member of their workforce? Do you want to be involved in working on some of the newest exciting products in the materials handling industry? If so, my client is on the search for their newest Field Service Engineer to join their Service team where you will cover Aberdeen and surrounding areas. They offer a fantastic benefits package which includes a starting salary circa to £36k with OTE £40k+, a Company van with personal use allowed, PDA & Mobile Phone, Overtime available, Full Door to Door payment, Bonus Scheme, Company Pension Scheme, 25 days holidays + Bank Holidays, Full training and development program. A full list of benefits is provided below This opportunity would suit an engineer from any of the following backgrounds; Job Summary of Service Engineer: Reporting to the Service Manager you will be expected to be in control of the maintenance, service and repairs of material handling equipment on various customer sites. The candidate will be working with an assortment of equipment including diesel, gas and electric trucks. You will be expected to manage own work in progress, ensure all relevant paperwork is completed accurately, attend regular training courses to maintain up-to-date knowledge of equipment and be an active team player sustaining the company's prestigious reputation. You will be working with everything from small pallet trucks, through to IC trucks, VNA trucks and automated trucks, you will be required to find, diagnose, and rectify faults, and undertake preventative maintenance on forklifts and other material handling equipment at their customer sites. Requirements of the Service Engineer: NVQ Level 2/3 qualified in Plant, Vehicle Maintenance or similar Preferably served a full apprenticeship Experienced Service Engineer, Plant Fitter, FLT Engineer, Vehicle Technician, HGV Technician or Ex forces will all be considered for this opportunity Technical experience in Engines, Electrics (Diagnostics) and Hydraulics is required. This includes all engine types. IT Literate and be comfortable with using the latest technology Salary and Benefits for the Service Engineer: Attractive starting salary package circa to £36k with OTE £40k+ minimum Overtime paid at time and a half over a 40 hour week Working Hours 8am to 4.30pm Mon to Thurs, 8am to 4pm on Fridays Door to Door payments Sign on bonus Attractive commission structure Occasional on-call support required paid in addition to your salary Company van and fuel card, with the option for private use 25 days annual leave Company pension scheme World-class specialised product training Full Forklift Driver License Buddy support system in place Company laptop and phone In-boot overnight parts deliveries PPE and Uniform supplied Uniform cleaning service Ongoing manufacturer training on our market-leading range of material-handling equipment Technical support available Local support network of colleagues If you are interested in this position, then please click the 'apply' button below or contact me via or . JBRP1_UKTJ
May 01, 2024
Full time
Are you looking to work for a global leading material handling company that offer an exceptional training and development program, investing in each member of their workforce? Do you want to be involved in working on some of the newest exciting products in the materials handling industry? If so, my client is on the search for their newest Field Service Engineer to join their Service team where you will cover Aberdeen and surrounding areas. They offer a fantastic benefits package which includes a starting salary circa to £36k with OTE £40k+, a Company van with personal use allowed, PDA & Mobile Phone, Overtime available, Full Door to Door payment, Bonus Scheme, Company Pension Scheme, 25 days holidays + Bank Holidays, Full training and development program. A full list of benefits is provided below This opportunity would suit an engineer from any of the following backgrounds; Job Summary of Service Engineer: Reporting to the Service Manager you will be expected to be in control of the maintenance, service and repairs of material handling equipment on various customer sites. The candidate will be working with an assortment of equipment including diesel, gas and electric trucks. You will be expected to manage own work in progress, ensure all relevant paperwork is completed accurately, attend regular training courses to maintain up-to-date knowledge of equipment and be an active team player sustaining the company's prestigious reputation. You will be working with everything from small pallet trucks, through to IC trucks, VNA trucks and automated trucks, you will be required to find, diagnose, and rectify faults, and undertake preventative maintenance on forklifts and other material handling equipment at their customer sites. Requirements of the Service Engineer: NVQ Level 2/3 qualified in Plant, Vehicle Maintenance or similar Preferably served a full apprenticeship Experienced Service Engineer, Plant Fitter, FLT Engineer, Vehicle Technician, HGV Technician or Ex forces will all be considered for this opportunity Technical experience in Engines, Electrics (Diagnostics) and Hydraulics is required. This includes all engine types. IT Literate and be comfortable with using the latest technology Salary and Benefits for the Service Engineer: Attractive starting salary package circa to £36k with OTE £40k+ minimum Overtime paid at time and a half over a 40 hour week Working Hours 8am to 4.30pm Mon to Thurs, 8am to 4pm on Fridays Door to Door payments Sign on bonus Attractive commission structure Occasional on-call support required paid in addition to your salary Company van and fuel card, with the option for private use 25 days annual leave Company pension scheme World-class specialised product training Full Forklift Driver License Buddy support system in place Company laptop and phone In-boot overnight parts deliveries PPE and Uniform supplied Uniform cleaning service Ongoing manufacturer training on our market-leading range of material-handling equipment Technical support available Local support network of colleagues If you are interested in this position, then please click the 'apply' button below or contact me via or . JBRP1_UKTJ