Construction Recruitment Services

CRS are looking for 2x reliable and hard working labourers for a job in camden starting tomorrow. Will involve general labouring duties at a building site. CSCS and PPE required 7:30 start Call (phone number removed) if avaliable for tomorrow Thanks

We are currently looking for a Groundworks gang for a contract in Grndley Brook SY13 Shropshire. We are laying 700m of deep drainage, so looking for a team of 5 groundworkers & 2 Labnourers. Would be looking for all operatives to hold CSCS withing the gang we would require a 360 Driver & Forwad tipping ddumper driver. 19- 20 per hour 9 hours CIS Rates may be negotiable depending on experience Call Joe (phone number removed)

CRS are looking for 3 labourers for a job at a colledge in Waybridge for Monday. Will involve general labouring duties, lifting and shifting and helping out tradesman. PPE required 8am start Appply for more information

CRS are looking for 2x dryliners for a job in Vheltenham starting as soon as possible. Will involve a bit of screw fixing plasterboard, MF and metal stud Experience is essential Apply for more information

CRS are currently looking for a reliabale and hardworking labourer for a permanent position with our client. The role will involve working for a general building company so duties will involve the following at different site in and around Kent: Assisting with the setup and clearing of job sites Loading and unloading materials and equipment Mixing and preparing materials such as concrete and mortar Operating basic hand and power tools Supporting skilled trades (e.g. bricklayers, carpenters, plasterers) Ensuring site cleanliness and safety at all times MUST BE ABLE TO DRIVE AND HAVE OWN TRANSPORT TO GET TO EACH SITE Apply for more information

TEKLA Draughtsman wanted for an Architectural Metalwork & Structural Steelwork. This is a permanent role. Company Overview: Our client, are a well-established steelwork firm specialising in the design, manufacture and installation of architectural metalwork and structural steelwork. They manufacture and install staircases and balustrades to complex structural steel frameworks for commercial and residential developments. Working for blue-chip clientele they are projected to continue to grow and are seeking an experienced TEKLA Draughtsman to help meet their ambitions. Role Overview: The successful candidate will be responsible for producing accurate and detailed drawings and models using TEKLA Structures, supporting the delivery of high-quality steel and metalwork fabrication projects. You will work closely with our in-house project managers, fabricators, and external clients to ensure that all designs meet project specifications and are delivered to schedule. Key Responsibilities: Produce 3D models and detailed fabrication drawings using TEKLA Structures software. Create general arrangement drawings, assembly drawings and parts lists for structural steel and architectural metalwork components. Interpret engineering and architectural drawings to create fabrication models. Liaise with clients, engineers, architects and other stakeholders to ensure drawings are accurate and reflect project requirements. Revise drawings based on feedback from the project team or client. Maintain drawing registers and ensure all documents are filed in line with company procedures. Ensure compliance with relevant British Standards, company processes and health and safety regulations. Requirements: Proven experience using TEKLA Structures within the structural steelwork or architectural metalwork industry. Strong understanding of fabrication and erection processes for steelwork and metalwork. Ability to read and interpret technical drawings and specifications. Good communication and organisational skills. Ability to work independently and as part of a team. Attention to detail and a proactive approach to problem solving. Desirable: Knowledge of other CAD software (e.g. AutoCAD, SolidWorks) would be advantageous. Familiarity with BIM coordination processes. What We Offer: A supportive working environment with opportunities for career development. Involvement in a wide variety of exciting and challenging projects. 38,000 to 50,000 salary 28 days annual leave Pension (NEST) How to Apply: Please send your CV detailing your relevant experience this advert. Apply now. Post code: EN3 4LE

We are currently looking for Curtain Wall fixers / Site Fitters that can undertake a range of site fitting tasks=. Will need to be abke to install balastrade works, coping, EPDM works Must have CSCS / WORKING AT HEIGHTS / HARNESS TRAINING & IPAF 190- 200 per day CIS You will be working direct for the FACADE company not the AGENCY Call joe (phone number removed)

We are currently looking for Curtain Wall fixers / Site Fitters that can undertake a range of site fitting tasks=. Will need to be abke to install balastrade works, coping, EPDM works Must have CSCS / WORKING AT HEIGHTS / HARNESS TRAINING & IPAF 190- 200 per day CIS You will be working direct for the FACADE company not the AGENCY Call joe (phone number removed)

CRS are looking for 2x labourers for a job at the univeristy of kent in Canterbury for Monday start. Will involve lifting and shifting work moving plasterboard and doors. 7am start Apply for more information

Currently looking for a SSSTS Superviosr that has Groundworks & Civils background. Previous experience is essential in the role. Will be over seeing works / sub contractors on site. Must have CSCS / SSSTS / TRANSPORT 23 - 24.50 9 hours per day MUST BE AVAILABLE MONDAY Please call Joe (phone number removed)

We are currently looking for x 2 CSCS Labourers for a contract in Whitchurch. Will be working for a groundworks / civils company setting uo a new site 1-2 week work 14.00 - 14.75 8 hours CIS Will requires copies of CSCS cards and checkable references call Joe (phone number removed)

CRS are looking for floor fitters for a job in Hemel Hempstead starting as soon as possible. 200 m2 of Latex work Must have CSCS cards and PPE Experience is essential Rate negotiable depending on expereince Apply for more info Thanks

CRS are looking for 2x floor fitters for a job in Greenford to start as soon as possible. Experience is eseential Own tools and PPE required 400m2 of Vinyl flooring to be done. Rate negotiable depending on experience Thanks

CRS are looking for a few floor fitters for a job in Fullham. Is a commerical project with open space 400m2 that needs vinyl floor fitted. PPE required Experience is essential Rate negotiable depending on experience Apply for more information

CRS are looking for a painter for a job West Bridgford, Nottingham starting as soon as possible. Will involve paitning corridoors in a care home. Experience is essential Own tools required Apply for more information

CRS are looking for a experienced and hard working labourer for a job in St Neots. Will involve mainly lifting and shifting duties and other general tasks. CSCS and full orange PPE required. Apply for more information

CRS are looking for 2x hardworking and reliabale groundworkers for a couple months worth of work in Basingstoke. Is a simple job will just be digging out and helping out with other tasks. CSCS and PPE required Apply for more information

We are currently looking for a Handyman - will asisitng wiht a riser installation must have CSCS and hand tools. Must have CSCS cards and previous experience in s similar role 17- 18per hour minimum 8 hours paid CIS Will require copies of tickets and two checkablle references call joe (phone number removed)

We are currently looking for the bekow, for a job starting in around 3 weeks time in Whitchurch. We have 700m of deep drainage to do. Would ideally look for a drainage gang 5 lads and 2 labours to work outside the gang. About 7 to 8 weeks work starting MUST HAVE CSCS OTHER TICKETS BENEFICIAL Will be asking for copies of tickets and checkable references upon request Call Joe (phone number removed)

Design Manager wanted in Enfield. Our client is a specialist architectural and structural steelwork contractor delivering bespoke large-scale projects across London and the South East. Working with blur-chip clientele, they work on landmark residential and commercial constructs. They are on the lookout for an experienced Design Manager to lead, mentor, and develop the team and take the company to the next level of growth. As a Design Manager you will be required to: Manage and coordinate all design and draughting activities for multiple live projects Lead and mentor a team of six draughtsmen, supporting their development and overseeing output quality Oversee drawing production using AUTOCAD and other CAD software Liaise with architects, structural engineers, main contractors, and clients to resolve design queries and drive technical solutions Attend site surveys and progress meetings as needed Support project teams through fabrication and installation phases, ensuring designs are buildable, cost-effective, and compliant The ideal applicant will have: Proven experience in a Design Manager, Senior Draughtsman, or similar leadership role within architectural metalwork, structural steelwork, or a related sector Ability to read and interpret complex architectural and structural drawings Confident communicating with architects, designers, fabricators, and site teams Proficiency with AUTOCAD is essential Strong organisational skills and attention to detail We offer: 60,000 annual salary Flexible working schedule (office-based with some site visits) On-site parking A supportive environment where you can make a real impact Pension Scheme 28 days holiday Applicants should apply to this advert and be willing to provide proof of eligibility to work in the UK when requested. PC: EN3 7SY