My client in St Neots is currently in need of an Electronics engineer Role: Design Power Supply and mixed signal modules for use in military or aviation applications Perform Analogue and/or Digital circuit design and Power Supply design Perform Schematic Capture using ECAD software (Altium/ OrCAD / Mentor), have appreciation of PCB layout and work with PCB Draughtsman to create PCB parts and assemblies Optionally to perform Embedded software development using C/C or FPGA development Support Verification & Validation testing by creating test plans, test reports, setting up and performing tests Circuit Analysis and Simulation Design for Manufacture / EMC / Environmental / Reliability To provide electrical / electronic support to design staff during development and testing of a range of products Investigate and provide reports on V&V and Qualification test failures and customer returns and queries Perform Component level testing on: software, populated PCBs, and electrical assemblies Fault finding to component level Support Production improvement actions, in resolving issues, assisting in creation of Acceptance Test Plans To help create and maintain a safe working environment and observe the published Health and Safety procedures To carry out any other tasks where reasonable and relevant, when required This is not an exhaustive list. QUALIFICATIONS HNC / HND Electrical / Electronic Engineering BSc / BEng Electrical / Electronic Engineering EXPERIENCE/ SKILLS Experience in Design and Development or Test Experience designing electronic hardware to meet DO-160 / MIL-STD s / DEF-STAN or BS EN standards Good practical skills (hands on approach) in a lab environment Experience of aircraft, defense, or automotive electronics industry Experience of design, testing or qualification of aircraft Galley products Experience of sub-system software requirements Proficient in MS office suite of applications Experience using LabVIEW / MATLAB. Experience in testing embedded systems Ability to liaise with Product Design team and external design facilities Detail design of digital and analogue Electrical / Electronic systems Knowledge of C or C programming The Salary for the position is between £30,000 per annum. If you would like to be considered for the role, please respond with an up to date CV
Nov 30, 2022
Full time
My client in St Neots is currently in need of an Electronics engineer Role: Design Power Supply and mixed signal modules for use in military or aviation applications Perform Analogue and/or Digital circuit design and Power Supply design Perform Schematic Capture using ECAD software (Altium/ OrCAD / Mentor), have appreciation of PCB layout and work with PCB Draughtsman to create PCB parts and assemblies Optionally to perform Embedded software development using C/C or FPGA development Support Verification & Validation testing by creating test plans, test reports, setting up and performing tests Circuit Analysis and Simulation Design for Manufacture / EMC / Environmental / Reliability To provide electrical / electronic support to design staff during development and testing of a range of products Investigate and provide reports on V&V and Qualification test failures and customer returns and queries Perform Component level testing on: software, populated PCBs, and electrical assemblies Fault finding to component level Support Production improvement actions, in resolving issues, assisting in creation of Acceptance Test Plans To help create and maintain a safe working environment and observe the published Health and Safety procedures To carry out any other tasks where reasonable and relevant, when required This is not an exhaustive list. QUALIFICATIONS HNC / HND Electrical / Electronic Engineering BSc / BEng Electrical / Electronic Engineering EXPERIENCE/ SKILLS Experience in Design and Development or Test Experience designing electronic hardware to meet DO-160 / MIL-STD s / DEF-STAN or BS EN standards Good practical skills (hands on approach) in a lab environment Experience of aircraft, defense, or automotive electronics industry Experience of design, testing or qualification of aircraft Galley products Experience of sub-system software requirements Proficient in MS office suite of applications Experience using LabVIEW / MATLAB. Experience in testing embedded systems Ability to liaise with Product Design team and external design facilities Detail design of digital and analogue Electrical / Electronic systems Knowledge of C or C programming The Salary for the position is between £30,000 per annum. If you would like to be considered for the role, please respond with an up to date CV
An exciting opportunity has arisen for an experienced CNC Grinder to join an established company based in Peterborough Client background My client s capabilities allows them to supply into numerous sectors and have a well recognised position in the market. The Role: CNC Grinder Main Duties: To operate cylindrical and surface grinders as required Have completed a recognised engineering apprenticeship To operate grinding machines - cylindrical and surface To work on defined schedules To work to planned times To maintain a safe and tidy environment in the work area To be aware of and follow all company Health & Safety policies and procedures Candidate Profile: Able to operate grinding machines Able to use hand honer, and understand different stone requirements Abrasive wheel dressing/changing Thorough methodical approach Able to interpret drawings and specifications Attention to quality Able to work in a team environment and to offer improvement ideas High degree of self motivation. Flexibility to work nightshift when required Flexibility to undertake other tasks in other areas Package and hours The Salary for the position is between £25,000 and £28,000 depending on experience. Days : Monday to Thursday 7.30 to 16.00 with 30 minute unpaid lunch break; Friday 7.30 -12.30. SHIFT : (Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. This could mean 2 week rota one week days and one week nights for which a nightshift premium will be paid at time and a third). Please if you would like to be considered then please respond with an up to date CV
Nov 30, 2022
Full time
An exciting opportunity has arisen for an experienced CNC Grinder to join an established company based in Peterborough Client background My client s capabilities allows them to supply into numerous sectors and have a well recognised position in the market. The Role: CNC Grinder Main Duties: To operate cylindrical and surface grinders as required Have completed a recognised engineering apprenticeship To operate grinding machines - cylindrical and surface To work on defined schedules To work to planned times To maintain a safe and tidy environment in the work area To be aware of and follow all company Health & Safety policies and procedures Candidate Profile: Able to operate grinding machines Able to use hand honer, and understand different stone requirements Abrasive wheel dressing/changing Thorough methodical approach Able to interpret drawings and specifications Attention to quality Able to work in a team environment and to offer improvement ideas High degree of self motivation. Flexibility to work nightshift when required Flexibility to undertake other tasks in other areas Package and hours The Salary for the position is between £25,000 and £28,000 depending on experience. Days : Monday to Thursday 7.30 to 16.00 with 30 minute unpaid lunch break; Friday 7.30 -12.30. SHIFT : (Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. This could mean 2 week rota one week days and one week nights for which a nightshift premium will be paid at time and a third). Please if you would like to be considered then please respond with an up to date CV
My client in Peteterborough is in need of an experienced Fitter. Job Purpose: To assemble complete machines and sub-assemblies to customer specifications, and to test completed equipment. Qualifications: Have completed a recognised engineering apprenticeship Other applicants who are willing to complete appropriate training will be considered The Job (Main Duties): To assemble kit of parts using drawings and internal paperwork system To install pneumatic and hydraulic pipework To assist with testing of finished equipment and to complete test records To operate portable hand tools for drilling, grinding and sanding etc. To lift components and assemblies using slings and pendant crane in a safe and protective manner, training will be given To work within planned times for jobs, and to feedback deviations when necessary To supply feedback on machine and process improvements To work as part of a multi-disciplinary team, assisting other sections when required To support mechanical work within the maintenance team To work on customers sites as part of an installation & commissioning team To work on customers sites as part of the Customer Services team To maintain a safe and tidy environment within their working area To register their time each day using the company ERP system (time booking) To be aware of and follow all company Health & Safety policies and procedures Candidate Profile (Experience, Skills and Knowledge): Have completed a recognised engineering apprenticeship (Not essential) Thorough methodical approach Able to interpret drawings and specifications Attention to quality Flexibility to undertake other tasks in other areas and on customers sites A high degree of self-motivation Flexibility to work additional house when required Hours of Work: Monday to Thursday 07:30 to 16:00 with 30 minute unpaid lunch break Friday 07:30 -12:30 Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. Nightshift premium will be paid at time and a third. Benefits: Salary: £32,000. Overtime for hours worked over 37/week paid at time and half. Holiday: 183 hours holiday entitlement. In addition the Company gives 3 days between Christmas and New Year, and the normal 8 public holidays. Holiday year runs from 1 April to 31 March. Private Health Care: You will be entitled to join the Company s Health Care Scheme, whereby you pay 50% and the Company pays 50% of the cost of Private Health Care cover for you, your partner, and your dependent children. Life Assurance: 3x annual salary Pension: Auto enrolled into pension from first day of employment - minimum of 5%. Company will match your contribution up to 6% (you can put more in than 6%). mechanical fitter, fitter, mechanical technician
Nov 30, 2022
Full time
My client in Peteterborough is in need of an experienced Fitter. Job Purpose: To assemble complete machines and sub-assemblies to customer specifications, and to test completed equipment. Qualifications: Have completed a recognised engineering apprenticeship Other applicants who are willing to complete appropriate training will be considered The Job (Main Duties): To assemble kit of parts using drawings and internal paperwork system To install pneumatic and hydraulic pipework To assist with testing of finished equipment and to complete test records To operate portable hand tools for drilling, grinding and sanding etc. To lift components and assemblies using slings and pendant crane in a safe and protective manner, training will be given To work within planned times for jobs, and to feedback deviations when necessary To supply feedback on machine and process improvements To work as part of a multi-disciplinary team, assisting other sections when required To support mechanical work within the maintenance team To work on customers sites as part of an installation & commissioning team To work on customers sites as part of the Customer Services team To maintain a safe and tidy environment within their working area To register their time each day using the company ERP system (time booking) To be aware of and follow all company Health & Safety policies and procedures Candidate Profile (Experience, Skills and Knowledge): Have completed a recognised engineering apprenticeship (Not essential) Thorough methodical approach Able to interpret drawings and specifications Attention to quality Flexibility to undertake other tasks in other areas and on customers sites A high degree of self-motivation Flexibility to work additional house when required Hours of Work: Monday to Thursday 07:30 to 16:00 with 30 minute unpaid lunch break Friday 07:30 -12:30 Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. Nightshift premium will be paid at time and a third. Benefits: Salary: £32,000. Overtime for hours worked over 37/week paid at time and half. Holiday: 183 hours holiday entitlement. In addition the Company gives 3 days between Christmas and New Year, and the normal 8 public holidays. Holiday year runs from 1 April to 31 March. Private Health Care: You will be entitled to join the Company s Health Care Scheme, whereby you pay 50% and the Company pays 50% of the cost of Private Health Care cover for you, your partner, and your dependent children. Life Assurance: 3x annual salary Pension: Auto enrolled into pension from first day of employment - minimum of 5%. Company will match your contribution up to 6% (you can put more in than 6%). mechanical fitter, fitter, mechanical technician
My client in South Molton is currently in need of a CNC Machinist. The role: The CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets. Key responsibilities Work closely with the pre setter to ensure tooling is set up correctly Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer Load tooling as appropriate into CNC machine Check accuracy of first off Check accuracy of parts using appropriate measurement tools Take corrective action to rectify errors by offset adjustment on CNC machine Obtain & Maintain A Stamp Approval status for machines and processes Undertake inspection process of other team members work when required Work on own initiatives and resolve any issues or problems to company specific procedures Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events Ability to be flexible and adaptable working on different machines and assisting colleagues as required. Flexible in work patterns to meet business needs Maintain TPM on machines The salary for this position is paying up to £28k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
Nov 30, 2022
Full time
My client in South Molton is currently in need of a CNC Machinist. The role: The CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets. Key responsibilities Work closely with the pre setter to ensure tooling is set up correctly Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer Load tooling as appropriate into CNC machine Check accuracy of first off Check accuracy of parts using appropriate measurement tools Take corrective action to rectify errors by offset adjustment on CNC machine Obtain & Maintain A Stamp Approval status for machines and processes Undertake inspection process of other team members work when required Work on own initiatives and resolve any issues or problems to company specific procedures Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events Ability to be flexible and adaptable working on different machines and assisting colleagues as required. Flexible in work patterns to meet business needs Maintain TPM on machines The salary for this position is paying up to £28k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
My client In Nuneaton (Warwickshire) is currently in need of CNC Millers and is also in need of a CNC Turners .Candidates ideally should have experience with Fanuc control or Haas. My client works in a number of industries ranging from Formula 1 to Aerospace. CNC Lathe and VMC Operators (£10.50+). Must be able to use and read non-digital measuring equipment and shadow graph etc Must have a good eye for detail. Must be able to follow written instructions and procedures. Preferably have a background in the aerospace industry. Must be able to change inserts and alter offsets to achieve drawing tolerances. To be focused and be able to work to deadlines. Must be able to keep a tidy work area and maintain paperwork to factory procedures. Monitor their own Quality and Productivity. CNC Lathe and VMC Setter Operators (£12.50+). All of the above plus:- Select correct tooling as instructed in programme. Bore jaws, clock Fixtures/Vices etc Must be able to accurately set all tools using cut and measure. Must be able to safely prove out new and proven programs / set ups. Ensure first part is correct ready for first off verification. CNC Lathe and VMC Setter/Supervisor (£14+). All of the above plus:- Must be capable of completing first off samples for other employees. Must be able to problem solve and troubleshoot most manufacturing issues. Be able to write simple programmes and make minor adjustments to existing programs if required. Supervise operators and resolve any manufacturing issues they may have. Monitor Quality and Productivity of Operators as required. Position: All positions are permanent and on a full time basis. Hourly rate: As above and dependant on experience. Working Hours are as follows:- Monday to Thursday 7.30 - 16.30pm Friday 7.30 - 13.30pm Overtime: All Overtime will be paid at Time and a third. Package includes non-contributory pension scheme, generous holiday allowance, and training to ensure your skills are developed. If you would like to be considered for this position then please respond with an up to date CV
Nov 30, 2022
Full time
My client In Nuneaton (Warwickshire) is currently in need of CNC Millers and is also in need of a CNC Turners .Candidates ideally should have experience with Fanuc control or Haas. My client works in a number of industries ranging from Formula 1 to Aerospace. CNC Lathe and VMC Operators (£10.50+). Must be able to use and read non-digital measuring equipment and shadow graph etc Must have a good eye for detail. Must be able to follow written instructions and procedures. Preferably have a background in the aerospace industry. Must be able to change inserts and alter offsets to achieve drawing tolerances. To be focused and be able to work to deadlines. Must be able to keep a tidy work area and maintain paperwork to factory procedures. Monitor their own Quality and Productivity. CNC Lathe and VMC Setter Operators (£12.50+). All of the above plus:- Select correct tooling as instructed in programme. Bore jaws, clock Fixtures/Vices etc Must be able to accurately set all tools using cut and measure. Must be able to safely prove out new and proven programs / set ups. Ensure first part is correct ready for first off verification. CNC Lathe and VMC Setter/Supervisor (£14+). All of the above plus:- Must be capable of completing first off samples for other employees. Must be able to problem solve and troubleshoot most manufacturing issues. Be able to write simple programmes and make minor adjustments to existing programs if required. Supervise operators and resolve any manufacturing issues they may have. Monitor Quality and Productivity of Operators as required. Position: All positions are permanent and on a full time basis. Hourly rate: As above and dependant on experience. Working Hours are as follows:- Monday to Thursday 7.30 - 16.30pm Friday 7.30 - 13.30pm Overtime: All Overtime will be paid at Time and a third. Package includes non-contributory pension scheme, generous holiday allowance, and training to ensure your skills are developed. If you would like to be considered for this position then please respond with an up to date CV
Senior Motorcycle Technician My client Company are now recruiting for a Senior Motorcycle Technician. As we continue to expand our range and build the Herald brand we are now looking for a Senior Motorcycle Technician to join our workshop team. You will be involved in building motorcycles as well as undertaking any maintenance or repairs as required. You will also help trainees or apprentices. As required, you will support the sales processes of bikes and spare parts including deliveries to dealers as well as learn bike build processes to support the operations of the Workshop. Your tasks and responsibilities will include: De-crating and assembling bikes following build processes. Provide high quality customer service by phone/email/face to face enquiries. Deliver bikes to dealers in coordination with the Sales Team to ensure the efficient operation of sales. Support Spare Parts operations as required using the procedures and systems as advised i.e. picking items for despatch and recording sales appropriately. Ensure a professional, quality service (external and internal) is provided at all times throughout the various stages of sales and aftersales. Take part in project work and bike development proposals with practical and commercially feasible options, planning and delivery as required. Represent the Company at trade shows or exhibitions and other relevant bodies to promote my client proactively. Any additional work identified as necessary for the smooth operation of the business. You will be a qualified motorbike Technician with experience of working in the motorbike industry. You will be a team player with strong communication skills and the ability to establish good relationships with colleagues and customers. You will also have a passion for the motorbike industry and be flexible in terms of working hours and be able to travel to dealers and exhibitions as required. If you wish to join our journey and feel you have the right skills to help us grow, then send us your CV today
Sep 24, 2022
Full time
Senior Motorcycle Technician My client Company are now recruiting for a Senior Motorcycle Technician. As we continue to expand our range and build the Herald brand we are now looking for a Senior Motorcycle Technician to join our workshop team. You will be involved in building motorcycles as well as undertaking any maintenance or repairs as required. You will also help trainees or apprentices. As required, you will support the sales processes of bikes and spare parts including deliveries to dealers as well as learn bike build processes to support the operations of the Workshop. Your tasks and responsibilities will include: De-crating and assembling bikes following build processes. Provide high quality customer service by phone/email/face to face enquiries. Deliver bikes to dealers in coordination with the Sales Team to ensure the efficient operation of sales. Support Spare Parts operations as required using the procedures and systems as advised i.e. picking items for despatch and recording sales appropriately. Ensure a professional, quality service (external and internal) is provided at all times throughout the various stages of sales and aftersales. Take part in project work and bike development proposals with practical and commercially feasible options, planning and delivery as required. Represent the Company at trade shows or exhibitions and other relevant bodies to promote my client proactively. Any additional work identified as necessary for the smooth operation of the business. You will be a qualified motorbike Technician with experience of working in the motorbike industry. You will be a team player with strong communication skills and the ability to establish good relationships with colleagues and customers. You will also have a passion for the motorbike industry and be flexible in terms of working hours and be able to travel to dealers and exhibitions as required. If you wish to join our journey and feel you have the right skills to help us grow, then send us your CV today
Electrical Assembly Technician The client are looking for a new Electrical Assembly Technician for our premises in Huntingdon, Cambridgeshire. We are an engineering firm in the automotive safety industry manufacturing crash test dummies (ATD as they are professionally known) and crash test barriers. We also produce aluminium honeycomb, Bespoke Composite Panels (BCP) and the clients under our other divisions. As well as our in-house machine and moulding capabilities. The role requires you to undertake tasks related to the manufacture, assembly and fitting of electrical components and assemblies for Anthropomorphic Test Devices (ATDs), including the assembly of test devices and instrumentation. You will also be responsible for producing wiring assemblies for the client. ATD Responsible for the assembly of sensor cables, to include Creating wiring assembly based on engineering drawings Soldering multi pin connectors (typically 7 and 16 pin Omnetics) Splicing/joining multiple core wire 100% inspect all connections Create testing jigs/fixtures as and where necessary to complete soldering tasks and inspection Repair and modification of existing sensor/equipment connections as necessary to support the day-to-day operation of the ATD testing facility. Create WI and procedures to allow consistent and repeatable working methods and products Take the lead where required with other electrical and electrical assembly projects tasks to support ATD products. Work with the client due to manufacture wiring harnesses as required Ensure that wiring harnesses are designed to be fit for purpose and to meet specifications and requirements Validate wiring harnesses to ensure that they meet defined quality standards Co-operate fully with the company regarding all H&S matters and be aware of the importance of complying with H&S Policy to ensure a safe workplace and maintain the integrity of the environment If you think you ve got the necessary experience for this role, then send us your CV today
Sep 24, 2022
Full time
Electrical Assembly Technician The client are looking for a new Electrical Assembly Technician for our premises in Huntingdon, Cambridgeshire. We are an engineering firm in the automotive safety industry manufacturing crash test dummies (ATD as they are professionally known) and crash test barriers. We also produce aluminium honeycomb, Bespoke Composite Panels (BCP) and the clients under our other divisions. As well as our in-house machine and moulding capabilities. The role requires you to undertake tasks related to the manufacture, assembly and fitting of electrical components and assemblies for Anthropomorphic Test Devices (ATDs), including the assembly of test devices and instrumentation. You will also be responsible for producing wiring assemblies for the client. ATD Responsible for the assembly of sensor cables, to include Creating wiring assembly based on engineering drawings Soldering multi pin connectors (typically 7 and 16 pin Omnetics) Splicing/joining multiple core wire 100% inspect all connections Create testing jigs/fixtures as and where necessary to complete soldering tasks and inspection Repair and modification of existing sensor/equipment connections as necessary to support the day-to-day operation of the ATD testing facility. Create WI and procedures to allow consistent and repeatable working methods and products Take the lead where required with other electrical and electrical assembly projects tasks to support ATD products. Work with the client due to manufacture wiring harnesses as required Ensure that wiring harnesses are designed to be fit for purpose and to meet specifications and requirements Validate wiring harnesses to ensure that they meet defined quality standards Co-operate fully with the company regarding all H&S matters and be aware of the importance of complying with H&S Policy to ensure a safe workplace and maintain the integrity of the environment If you think you ve got the necessary experience for this role, then send us your CV today
My client in Huntingdon is currently in need of a Development Test Engineer You will be working in our test lab, researching materials and processes to analyse to see how we can further develop our ATDs to ensure better car safety. There will be additional production support work, troubleshooting various issues and occasional ad-hoc engineering projects to help support the test lab programme. Key tasks and responsibilities of the role are: • Lead the evaluation and testing of new products, materials etc • Undertake research into new processes and methods such as test types, standards, material information etc. • Training personnel to carry out testing on products moving from development into production. • Develop the capability of the Test Laboratory to support the development of products and progress the development and assembly of new equipment, tools and jigs as required. • Ensure good practice in the outlining and preparing of tests and analysis of data and report writing/preparation of result in an appropriate way as required. • Ensure data, files are stored in a logical manner. • Work with project engineers and colleagues from other departments to deliver test programmes and ensure they meet the project requirements. • Participate in relevant product development projects and contribute to find solutions using your experience and knowledge. • Support production testing where deemed necessary. • Deliver the preparation of samples for both customers and in-house testing. Requirments: • You will need 2 years engineering experience in a similar manufacturing environment and • a degree level qualification, alongside proficiency using CAD (preferably Solidworks). • You should have some knowledge of Data Acquisition Systems (DAS) to gather data in development testing for analysis and any experience running projects would also be a major plus. The salary for this position is between £25,000 to £30,000
Sep 24, 2022
Full time
My client in Huntingdon is currently in need of a Development Test Engineer You will be working in our test lab, researching materials and processes to analyse to see how we can further develop our ATDs to ensure better car safety. There will be additional production support work, troubleshooting various issues and occasional ad-hoc engineering projects to help support the test lab programme. Key tasks and responsibilities of the role are: • Lead the evaluation and testing of new products, materials etc • Undertake research into new processes and methods such as test types, standards, material information etc. • Training personnel to carry out testing on products moving from development into production. • Develop the capability of the Test Laboratory to support the development of products and progress the development and assembly of new equipment, tools and jigs as required. • Ensure good practice in the outlining and preparing of tests and analysis of data and report writing/preparation of result in an appropriate way as required. • Ensure data, files are stored in a logical manner. • Work with project engineers and colleagues from other departments to deliver test programmes and ensure they meet the project requirements. • Participate in relevant product development projects and contribute to find solutions using your experience and knowledge. • Support production testing where deemed necessary. • Deliver the preparation of samples for both customers and in-house testing. Requirments: • You will need 2 years engineering experience in a similar manufacturing environment and • a degree level qualification, alongside proficiency using CAD (preferably Solidworks). • You should have some knowledge of Data Acquisition Systems (DAS) to gather data in development testing for analysis and any experience running projects would also be a major plus. The salary for this position is between £25,000 to £30,000
Hello, My client in Southend on Sea is in need of a Quality Engineer. OVERALL PURPOSE OF THE ROLE: The purpose of the role is to inspect products produced. PRINCIPLE ACCOUNTABILITIES: • Mechanical inspection of parts and assemblies, • Functional testing of assembled items of equipment, • Participation in Material Review Board activities, • Assist with the establishment of resolutions for product quality issues, • Develop and implement quality control plans and product quality standards, • Participate in product and process improvement activities as required, • Participate in product development and qualification activities as required, • Establish and approve effective corrective action plans, • Creation and maintenance of CNC Co-ordinate Measuring Machine Programs, • To assist with the identification of training and development needs of employees and to further assist with the delivery of training as required, • To carry out any other tasks where reasonable and relevant as required, • Abide by specific internally established control systems and authorities, to lead by personal example and encourage all employees to conduct their activities in accordance with all applicable laws and the Company s standards and policies, including its environmental, safety and health policies. ESSENTIAL REQUIREMENTS: • English, Maths and Science GCSE (or equivalent) at grade C or above are essential. • 4 years experience working within an aerospace environment, and able to use all types of basic measuring equipment are required. • Candidates must be proficient in Microsoft operating system, Microsoft Office suite and have a practical approach to solutions. • The ability to work independently, whilst collaborating in a team environment and able to work under pressure and to deadlines are essential requirements. DESIRABLE REQUIREMENTS: • A recognised industry Apprenticeship, previous experience working within a quality role and knowledge of mechanical inspection would be advantageous. • A full, clean UK driving licence, and available to visit suppliers / customers if required would be desirable. COMPANY BENEFITS: • Health Care Cash Plan • Contributory Pension Scheme for eligible employees • Employee Assistance Programme • 24 days holiday (in addition to UK Bank and public holidays) • Life Assurance • Company Sick Pay Scheme • Free car parking • Early finish on Fridays (1.00pm) • ( Available after 1 year of service) Due to the anticipated high number of applications to be received, unfortunately we are only able to respond to shortlisted candidates. If you have not had a response from us within two weeks, please consider your application unsuccessful. Job Types: Full-time, Permanent Salary: Up to £26,424.00 per year If you are interested please reply with an up to date CV
Sep 24, 2022
Full time
Hello, My client in Southend on Sea is in need of a Quality Engineer. OVERALL PURPOSE OF THE ROLE: The purpose of the role is to inspect products produced. PRINCIPLE ACCOUNTABILITIES: • Mechanical inspection of parts and assemblies, • Functional testing of assembled items of equipment, • Participation in Material Review Board activities, • Assist with the establishment of resolutions for product quality issues, • Develop and implement quality control plans and product quality standards, • Participate in product and process improvement activities as required, • Participate in product development and qualification activities as required, • Establish and approve effective corrective action plans, • Creation and maintenance of CNC Co-ordinate Measuring Machine Programs, • To assist with the identification of training and development needs of employees and to further assist with the delivery of training as required, • To carry out any other tasks where reasonable and relevant as required, • Abide by specific internally established control systems and authorities, to lead by personal example and encourage all employees to conduct their activities in accordance with all applicable laws and the Company s standards and policies, including its environmental, safety and health policies. ESSENTIAL REQUIREMENTS: • English, Maths and Science GCSE (or equivalent) at grade C or above are essential. • 4 years experience working within an aerospace environment, and able to use all types of basic measuring equipment are required. • Candidates must be proficient in Microsoft operating system, Microsoft Office suite and have a practical approach to solutions. • The ability to work independently, whilst collaborating in a team environment and able to work under pressure and to deadlines are essential requirements. DESIRABLE REQUIREMENTS: • A recognised industry Apprenticeship, previous experience working within a quality role and knowledge of mechanical inspection would be advantageous. • A full, clean UK driving licence, and available to visit suppliers / customers if required would be desirable. COMPANY BENEFITS: • Health Care Cash Plan • Contributory Pension Scheme for eligible employees • Employee Assistance Programme • 24 days holiday (in addition to UK Bank and public holidays) • Life Assurance • Company Sick Pay Scheme • Free car parking • Early finish on Fridays (1.00pm) • ( Available after 1 year of service) Due to the anticipated high number of applications to be received, unfortunately we are only able to respond to shortlisted candidates. If you have not had a response from us within two weeks, please consider your application unsuccessful. Job Types: Full-time, Permanent Salary: Up to £26,424.00 per year If you are interested please reply with an up to date CV
Manufacturing Team Leader We are seeking a hands-on Manufacturing Team Leader to work in this physical Role in our Tables Production Department. You will be leading and working alongside operators producing high volume and quality work, ensuring they are working to the latest SOPs and that daily machine maintenance checks are being processed. You will communicate clearly both with your peers and the Shift Supervisor to ensure continuous flow of WIP and demonstrate a strong commitment to continuous process improvement, involving yourself closely with ongoing projects and driving the implementation of improvement ideas put forward by team members, and strategies laid out by leadership. Our Working Environment You must be positive minded, goal driven, and a strong team player focused on continuous improvement. In return, we provide customised training and development that accelerates your career progression. Your Responsibilities • Leading an allocated team to achieve scheduled manufacturing targets • Continually drive cross-training and development of your team members to improve quality, output and increase flexibility within the work area • Support and drive problem solving and quality/process/performance improvement • Maintaining high levels of attention to detail at all times, recording and communicating accurate technical measurements and readings • Participate in recruitment and performance management processes Essential Requirements and Qualifications • Strong people and leadership skills, with the ability to train and mentor colleagues • A practical hands on approach with several years experience in a manufacturing environment • Ability to interpret, follow and train operators to Standard Operating Procedures • High level of mechanical aptitude and attention to detail with the ability to maintain focus • Proven ability to identify and resolve problems quickly and work effectively in a team environment Working Hours: Monday to Thursday 7:30am to 4:30pm and Friday 7:30am to 12:30pm Production- Manufacturing Team leader (First Shift) MB x 1 Hours of Work: Monday-Thursday 6am-2:30pm and Friday 6am-1pm Salary: £13.60 Production- Manufacturing Team Leader (Second Shift) x 2 Hours of Work: Monday to Thursday 2:25pm to 10:55pm and Fridays 12:55pm to 7:55pm Salary: £13.60 + 15% Shift Premium Start Date: ASAP
Sep 24, 2022
Full time
Manufacturing Team Leader We are seeking a hands-on Manufacturing Team Leader to work in this physical Role in our Tables Production Department. You will be leading and working alongside operators producing high volume and quality work, ensuring they are working to the latest SOPs and that daily machine maintenance checks are being processed. You will communicate clearly both with your peers and the Shift Supervisor to ensure continuous flow of WIP and demonstrate a strong commitment to continuous process improvement, involving yourself closely with ongoing projects and driving the implementation of improvement ideas put forward by team members, and strategies laid out by leadership. Our Working Environment You must be positive minded, goal driven, and a strong team player focused on continuous improvement. In return, we provide customised training and development that accelerates your career progression. Your Responsibilities • Leading an allocated team to achieve scheduled manufacturing targets • Continually drive cross-training and development of your team members to improve quality, output and increase flexibility within the work area • Support and drive problem solving and quality/process/performance improvement • Maintaining high levels of attention to detail at all times, recording and communicating accurate technical measurements and readings • Participate in recruitment and performance management processes Essential Requirements and Qualifications • Strong people and leadership skills, with the ability to train and mentor colleagues • A practical hands on approach with several years experience in a manufacturing environment • Ability to interpret, follow and train operators to Standard Operating Procedures • High level of mechanical aptitude and attention to detail with the ability to maintain focus • Proven ability to identify and resolve problems quickly and work effectively in a team environment Working Hours: Monday to Thursday 7:30am to 4:30pm and Friday 7:30am to 12:30pm Production- Manufacturing Team leader (First Shift) MB x 1 Hours of Work: Monday-Thursday 6am-2:30pm and Friday 6am-1pm Salary: £13.60 Production- Manufacturing Team Leader (Second Shift) x 2 Hours of Work: Monday to Thursday 2:25pm to 10:55pm and Fridays 12:55pm to 7:55pm Salary: £13.60 + 15% Shift Premium Start Date: ASAP
My client in Peterborough is currently in need of a Mechanical Design Engineer The Job (Main Duties): To ensure accurate drawings and parts lists are produced in accordance with companys standards and quality procedures. To manage priorities to ensure project schedules are maintained. To be competent in the use of Siemens NX application and TeamCenter ensuring compliance with companys best practices. To ensure compliance of the equipment with legislation (e.g. EC Directives). To ensure compliance of the equipment with company standards and quality procedures. To maintain and update drawings and parts lists by completion of change requests. To work with suppliers to ensure applications are fully and reliably implemented. To undertake calculations to aid design work on projects. To brief field engineers and visit customer sites when necessary. To support engineering development, sales and customer services as appropriate. To be aware of and follow all company Health & Safety policies and procedures in respect of self and others. Experience, Skills and Knowledge A highly motivated, confident and dedicated professional. Qualified to HNC/HND/degree level or equivalent in Engineering, or with an equivalent level of experience Competent in the use of 3D design and ERP business systems. An innovative engineer with an analytical approach to problem solving. Able to work alone or as a member of a design team. Good communication skills. Good PC literacy skills Word, Excel, Powerpoint. Able to travel both within the UK and throughout the world. The Salary for the position is between £35,000 to £40,000 depending on experience. If you would like to be considered for the role, please respond with an up to date CV
Sep 24, 2022
Full time
My client in Peterborough is currently in need of a Mechanical Design Engineer The Job (Main Duties): To ensure accurate drawings and parts lists are produced in accordance with companys standards and quality procedures. To manage priorities to ensure project schedules are maintained. To be competent in the use of Siemens NX application and TeamCenter ensuring compliance with companys best practices. To ensure compliance of the equipment with legislation (e.g. EC Directives). To ensure compliance of the equipment with company standards and quality procedures. To maintain and update drawings and parts lists by completion of change requests. To work with suppliers to ensure applications are fully and reliably implemented. To undertake calculations to aid design work on projects. To brief field engineers and visit customer sites when necessary. To support engineering development, sales and customer services as appropriate. To be aware of and follow all company Health & Safety policies and procedures in respect of self and others. Experience, Skills and Knowledge A highly motivated, confident and dedicated professional. Qualified to HNC/HND/degree level or equivalent in Engineering, or with an equivalent level of experience Competent in the use of 3D design and ERP business systems. An innovative engineer with an analytical approach to problem solving. Able to work alone or as a member of a design team. Good communication skills. Good PC literacy skills Word, Excel, Powerpoint. Able to travel both within the UK and throughout the world. The Salary for the position is between £35,000 to £40,000 depending on experience. If you would like to be considered for the role, please respond with an up to date CV
Due to expansion my client based in Peterborough are currently seeking CNC Machinists to join their established work force. Job Purpose: To manufacture, to our drawings, parts that are supplied to our Assembly Shop or direct to customers Main Duties: You will operate manual and CNC machines You will self-inspect parts produced Work to defined schedules Work to planned times Maintain a safe and tidy environment in the work area and adhere to all Health & Safety policies and procedures (Experience, Skills and Knowledge): Fully conversant with using Fanuc or Mazatrol operating systems. Flexibility to work night shift (essential); also willingness to work overtime when required Willing to train in other areas of the machine shop Able to interpret drawings and specifications Hours of Work: Monday to Thursday 07:30 to 16:00 Friday 07:30 -12:30 Salary negotiable depending on level of experience. If you would like to be considered or know more about this role please apply below
Sep 24, 2022
Full time
Due to expansion my client based in Peterborough are currently seeking CNC Machinists to join their established work force. Job Purpose: To manufacture, to our drawings, parts that are supplied to our Assembly Shop or direct to customers Main Duties: You will operate manual and CNC machines You will self-inspect parts produced Work to defined schedules Work to planned times Maintain a safe and tidy environment in the work area and adhere to all Health & Safety policies and procedures (Experience, Skills and Knowledge): Fully conversant with using Fanuc or Mazatrol operating systems. Flexibility to work night shift (essential); also willingness to work overtime when required Willing to train in other areas of the machine shop Able to interpret drawings and specifications Hours of Work: Monday to Thursday 07:30 to 16:00 Friday 07:30 -12:30 Salary negotiable depending on level of experience. If you would like to be considered or know more about this role please apply below
An exciting opportunity has arisen for an experienced CNC Grinder to join an established company based in Peterborough Client background My client s capabilities allows them to supply into numerous sectors and have a well recognised position in the market. The Role: CNC Grinder Main Duties: To operate cylindrical and surface grinders as required Have completed a recognised engineering apprenticeship To operate grinding machines - cylindrical and surface To work on defined schedules To work to planned times To maintain a safe and tidy environment in the work area To be aware of and follow all company Health & Safety policies and procedures Candidate Profile: Able to operate grinding machines Able to use hand honer, and understand different stone requirements Abrasive wheel dressing/changing Thorough methodical approach Able to interpret drawings and specifications Attention to quality Able to work in a team environment and to offer improvement ideas High degree of self motivation. Flexibility to work nightshift when required Flexibility to undertake other tasks in other areas Package and hours The Salary for the position is between £25,000 and £28,000 depending on experience. Days : Monday to Thursday 7.30 to 16.00 with 30 minute unpaid lunch break; Friday 7.30 -12.30. SHIFT : (Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. This could mean 2 week rota one week days and one week nights for which a nightshift premium will be paid at time and a third). Please if you would like to be considered then please respond with an up to date CV
Sep 24, 2022
Full time
An exciting opportunity has arisen for an experienced CNC Grinder to join an established company based in Peterborough Client background My client s capabilities allows them to supply into numerous sectors and have a well recognised position in the market. The Role: CNC Grinder Main Duties: To operate cylindrical and surface grinders as required Have completed a recognised engineering apprenticeship To operate grinding machines - cylindrical and surface To work on defined schedules To work to planned times To maintain a safe and tidy environment in the work area To be aware of and follow all company Health & Safety policies and procedures Candidate Profile: Able to operate grinding machines Able to use hand honer, and understand different stone requirements Abrasive wheel dressing/changing Thorough methodical approach Able to interpret drawings and specifications Attention to quality Able to work in a team environment and to offer improvement ideas High degree of self motivation. Flexibility to work nightshift when required Flexibility to undertake other tasks in other areas Package and hours The Salary for the position is between £25,000 and £28,000 depending on experience. Days : Monday to Thursday 7.30 to 16.00 with 30 minute unpaid lunch break; Friday 7.30 -12.30. SHIFT : (Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. This could mean 2 week rota one week days and one week nights for which a nightshift premium will be paid at time and a third). Please if you would like to be considered then please respond with an up to date CV
My client based in Bracknell is currently in need of a Support Engineer due to experience. The role of Engineering Support will be to carry out testing and commissioning for a range of clients in the built environment. This includes assisting with building of test rigs, using test instrumentation and assisting with the production of reports for clients. In this position you will be working in a friendly environment as part of the Test House. As Engineering Support your main duties will be to: • Be responsible for housekeeping activities in the laboratory including preparation of instrumentation, test rigs and test samples • Assist with the construction, maintenance and operation of test rigs • Assist with testing of heating, ventilation air-conditioning and refrigeration products and systems • Assist with carrying out standard laboratory, bespoke site-based investigations and physical mock-ups • Assist with reviewing test data and preparing reports • Ensure that the work of the section is properly documented and filed, complying with formal procedures • Ensure the tasks undertaken within the Section are performed efficiently and to high technical and quality levels in accordance with the required standards • Ensure compliance with all Health and Safety requirements • Seek and promote opportunities for new work • Perform other job-related duties as assigned The successful candidate: To be successful in this role you will possess the following Skills and Knowledge: • Ability to fulfil routine tasks and seek help when and where necessary • Ability to approach tasks positively with confidence and enthusiasm • Good Time-Management skills i.e. ability to manage workload and prioritise tasks • Co-operative attitude to work colleagues • Pragmatic with a flexible approach • Must be articulate and be able to express yourself clearly • PC literate and numerate • Report writing skills • Current driving licence • Academic and professional qualifications including working in accordance with ISO 17025 and ISO 9001 Quality The salary for the role is £21k per annum and includes loads of benefits. Please respond with an up to date CV to be considered
Sep 24, 2022
Full time
My client based in Bracknell is currently in need of a Support Engineer due to experience. The role of Engineering Support will be to carry out testing and commissioning for a range of clients in the built environment. This includes assisting with building of test rigs, using test instrumentation and assisting with the production of reports for clients. In this position you will be working in a friendly environment as part of the Test House. As Engineering Support your main duties will be to: • Be responsible for housekeeping activities in the laboratory including preparation of instrumentation, test rigs and test samples • Assist with the construction, maintenance and operation of test rigs • Assist with testing of heating, ventilation air-conditioning and refrigeration products and systems • Assist with carrying out standard laboratory, bespoke site-based investigations and physical mock-ups • Assist with reviewing test data and preparing reports • Ensure that the work of the section is properly documented and filed, complying with formal procedures • Ensure the tasks undertaken within the Section are performed efficiently and to high technical and quality levels in accordance with the required standards • Ensure compliance with all Health and Safety requirements • Seek and promote opportunities for new work • Perform other job-related duties as assigned The successful candidate: To be successful in this role you will possess the following Skills and Knowledge: • Ability to fulfil routine tasks and seek help when and where necessary • Ability to approach tasks positively with confidence and enthusiasm • Good Time-Management skills i.e. ability to manage workload and prioritise tasks • Co-operative attitude to work colleagues • Pragmatic with a flexible approach • Must be articulate and be able to express yourself clearly • PC literate and numerate • Report writing skills • Current driving licence • Academic and professional qualifications including working in accordance with ISO 17025 and ISO 9001 Quality The salary for the role is £21k per annum and includes loads of benefits. Please respond with an up to date CV to be considered
My client in Peteterborough is in need of an experienced Fitter. Job Purpose: To assemble complete machines and sub-assemblies to customer specifications, and to test completed equipment. Qualifications: Have completed a recognised engineering apprenticeship Other applicants who are willing to complete appropriate training will be considered The Job (Main Duties): To assemble kit of parts using drawings and internal paperwork system To install pneumatic and hydraulic pipework To assist with testing of finished equipment and to complete test records To operate portable hand tools for drilling, grinding and sanding etc. To lift components and assemblies using slings and pendant crane in a safe and protective manner, training will be given To work within planned times for jobs, and to feedback deviations when necessary To supply feedback on machine and process improvements To work as part of a multi-disciplinary team, assisting other sections when required To support mechanical work within the maintenance team To work on customers sites as part of an installation & commissioning team To work on customers sites as part of the Customer Services team To maintain a safe and tidy environment within their working area To register their time each day using the company ERP system (time booking) To be aware of and follow all company Health & Safety policies and procedures Candidate Profile (Experience, Skills and Knowledge): Have completed a recognised engineering apprenticeship Thorough methodical approach Able to interpret drawings and specifications Attention to quality Flexibility to undertake other tasks in other areas and on customers sites A high degree of self-motivation Flexibility to work additional house when required Hours of Work: Monday to Thursday 07:30 to 16:00 with 30 minute unpaid lunch break Friday 07:30 -12:30 Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. Nightshift premium will be paid at time and a third. Benefits: Salary: £32,000. Overtime for hours worked over 37/week paid at time and half. Holiday: 183 hours holiday entitlement. In addition the Company gives 3 days between Christmas and New Year, and the normal 8 public holidays. Holiday year runs from 1 April to 31 March. Private Health Care: You will be entitled to join the Company s Health Care Scheme, whereby you pay 50% and the Company pays 50% of the cost of Private Health Care cover for you, your partner, and your dependent children. Life Assurance: 3x annual salary Pension: Auto enrolled into pension from first day of employment - minimum of 5%. Company will match your contribution up to 6% (you can put more in than 6%). mechanical fitter, fitter, mechanical technician
Sep 24, 2022
Full time
My client in Peteterborough is in need of an experienced Fitter. Job Purpose: To assemble complete machines and sub-assemblies to customer specifications, and to test completed equipment. Qualifications: Have completed a recognised engineering apprenticeship Other applicants who are willing to complete appropriate training will be considered The Job (Main Duties): To assemble kit of parts using drawings and internal paperwork system To install pneumatic and hydraulic pipework To assist with testing of finished equipment and to complete test records To operate portable hand tools for drilling, grinding and sanding etc. To lift components and assemblies using slings and pendant crane in a safe and protective manner, training will be given To work within planned times for jobs, and to feedback deviations when necessary To supply feedback on machine and process improvements To work as part of a multi-disciplinary team, assisting other sections when required To support mechanical work within the maintenance team To work on customers sites as part of an installation & commissioning team To work on customers sites as part of the Customer Services team To maintain a safe and tidy environment within their working area To register their time each day using the company ERP system (time booking) To be aware of and follow all company Health & Safety policies and procedures Candidate Profile (Experience, Skills and Knowledge): Have completed a recognised engineering apprenticeship Thorough methodical approach Able to interpret drawings and specifications Attention to quality Flexibility to undertake other tasks in other areas and on customers sites A high degree of self-motivation Flexibility to work additional house when required Hours of Work: Monday to Thursday 07:30 to 16:00 with 30 minute unpaid lunch break Friday 07:30 -12:30 Some roles will require a night shift rota and possible weekend work so candidates will need to be open to that if required. Nightshift premium will be paid at time and a third. Benefits: Salary: £32,000. Overtime for hours worked over 37/week paid at time and half. Holiday: 183 hours holiday entitlement. In addition the Company gives 3 days between Christmas and New Year, and the normal 8 public holidays. Holiday year runs from 1 April to 31 March. Private Health Care: You will be entitled to join the Company s Health Care Scheme, whereby you pay 50% and the Company pays 50% of the cost of Private Health Care cover for you, your partner, and your dependent children. Life Assurance: 3x annual salary Pension: Auto enrolled into pension from first day of employment - minimum of 5%. Company will match your contribution up to 6% (you can put more in than 6%). mechanical fitter, fitter, mechanical technician
My client in South Molton is currently in need of a CNC Machinist. The role: The CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets. Key responsibilities Work closely with the pre setter to ensure tooling is set up correctly Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer Load tooling as appropriate into CNC machine Check accuracy of first off Check accuracy of parts using appropriate measurement tools Take corrective action to rectify errors by offset adjustment on CNC machine Obtain & Maintain A Stamp Approval status for machines and processes Undertake inspection process of other team members work when required Work on own initiatives and resolve any issues or problems to company specific procedures Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events Ability to be flexible and adaptable working on different machines and assisting colleagues as required. Flexible in work patterns to meet business needs Maintain TPM on machines The salary for this position is paying up to £28k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
Sep 24, 2022
Full time
My client in South Molton is currently in need of a CNC Machinist. The role: The CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets. Key responsibilities Work closely with the pre setter to ensure tooling is set up correctly Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer Load tooling as appropriate into CNC machine Check accuracy of first off Check accuracy of parts using appropriate measurement tools Take corrective action to rectify errors by offset adjustment on CNC machine Obtain & Maintain A Stamp Approval status for machines and processes Undertake inspection process of other team members work when required Work on own initiatives and resolve any issues or problems to company specific procedures Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events Ability to be flexible and adaptable working on different machines and assisting colleagues as required. Flexible in work patterns to meet business needs Maintain TPM on machines The salary for this position is paying up to £28k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
My client In south end on sea is currently in need of a Sewing Machinist due to expansion To over lock cut parts as per instructions/training. To sew cut parts into complete items referencing drawings, templates, work instructions and/or samples. To carry out any reworks deemed necessary by management, supervision or inspection. To keep the sewing machine/over locker in a clean and regularly oiled condition and report any faults to the Team Leader. To work within guidelines/instructions to ensure traceability is maintained. To carry out duties in a proper and efficient manner, act wholeheartedly in the interest of the Company at all times and to comply with the Company Rules and Regulations. Responsible for ensuring that a high standard of housekeeping is maintained. To support team members with other tasks as and when necessary. To help create and maintain a safe working environment and observe the published Health and Safety procedures. To carry out any other tasks where reasonable and relevant, when required. Qualification Educated to GCSE Level (or equivalent) Basic English Communication Experience Minimum 12 months experience using industrial sewing machines Over locking experience Experience of sewing various items, so to understand how the product goes together from cut parts Ability to work independently while collaborating in a team environment Ability to work under pressure and to deadlines The hourly rate for this position is paying up to £12.08 per hour with lots if additional benefits
Aug 31, 2022
Full time
My client In south end on sea is currently in need of a Sewing Machinist due to expansion To over lock cut parts as per instructions/training. To sew cut parts into complete items referencing drawings, templates, work instructions and/or samples. To carry out any reworks deemed necessary by management, supervision or inspection. To keep the sewing machine/over locker in a clean and regularly oiled condition and report any faults to the Team Leader. To work within guidelines/instructions to ensure traceability is maintained. To carry out duties in a proper and efficient manner, act wholeheartedly in the interest of the Company at all times and to comply with the Company Rules and Regulations. Responsible for ensuring that a high standard of housekeeping is maintained. To support team members with other tasks as and when necessary. To help create and maintain a safe working environment and observe the published Health and Safety procedures. To carry out any other tasks where reasonable and relevant, when required. Qualification Educated to GCSE Level (or equivalent) Basic English Communication Experience Minimum 12 months experience using industrial sewing machines Over locking experience Experience of sewing various items, so to understand how the product goes together from cut parts Ability to work independently while collaborating in a team environment Ability to work under pressure and to deadlines The hourly rate for this position is paying up to £12.08 per hour with lots if additional benefits
My client in Ely is currently in need of an NPI Engineer Working collaborative with the design engineers to successfully transition prototype designs or redesigns into a production released state product Primary Responsibilities: (NOT LIMITED TO) Coordinate activities for the transfer of new products into production • Inspection and evaluation of first production batch parts (First Article Inspection) with metrology techniques • Close liaison with design engineers and R&D purchasing for quality assurance of components • Building of pre-production batch and notify of issues to design engineers • Validate BOMs and creation Routes in AX • Assist conducting test of mechanical system to then collect and analyse the data gathered • Development of SOP procedures for product manufacturing • Provide feedback to engineers on improvements to the design based on preproduction assembly and tests • Training of production personnel according to SOP and build techniques and follow up on potential issues • Support design and manufacture of jigs to improve consistency of build and assembly time in production • Supporting engineering with prototype build and first batch characterization using engineering measuring techniques when required Requirements: • Extensive knowledge of Mechanical Manufacturing assembly techniques • Ability to interpret standard operating procedures together with mechanical/engineering and assembly drawings • Ability to identify and resolve design and assembly problems quickly (good troubleshooting skills) • Knowledge of testing techniques for mechanical/electronics products • Strong organisational, analytical and communication skills written and verbal • Ability to multitask, time manage and work independently • Familiarity with PC based firmware programming equipment The Salary for the position is between £30,000 to £35,000 depending on experience. If you would like to be considered for the role, please respond with an up to date CV
Aug 31, 2022
Full time
My client in Ely is currently in need of an NPI Engineer Working collaborative with the design engineers to successfully transition prototype designs or redesigns into a production released state product Primary Responsibilities: (NOT LIMITED TO) Coordinate activities for the transfer of new products into production • Inspection and evaluation of first production batch parts (First Article Inspection) with metrology techniques • Close liaison with design engineers and R&D purchasing for quality assurance of components • Building of pre-production batch and notify of issues to design engineers • Validate BOMs and creation Routes in AX • Assist conducting test of mechanical system to then collect and analyse the data gathered • Development of SOP procedures for product manufacturing • Provide feedback to engineers on improvements to the design based on preproduction assembly and tests • Training of production personnel according to SOP and build techniques and follow up on potential issues • Support design and manufacture of jigs to improve consistency of build and assembly time in production • Supporting engineering with prototype build and first batch characterization using engineering measuring techniques when required Requirements: • Extensive knowledge of Mechanical Manufacturing assembly techniques • Ability to interpret standard operating procedures together with mechanical/engineering and assembly drawings • Ability to identify and resolve design and assembly problems quickly (good troubleshooting skills) • Knowledge of testing techniques for mechanical/electronics products • Strong organisational, analytical and communication skills written and verbal • Ability to multitask, time manage and work independently • Familiarity with PC based firmware programming equipment The Salary for the position is between £30,000 to £35,000 depending on experience. If you would like to be considered for the role, please respond with an up to date CV
My client in Ipswich Suffolk is currently in need of a Senior mechanical engineer due to expansion. Job Purpose To specify and design mechanical building services and to manage compliance and quality of installations as a Senior member of the team. Key responsibilities Enable integration and coordination of information within the information model Maintain and receive information into the information model Configure information for project outputs Populate the information exchange format for the information model Assure delivery of information exchanges Confirm supplier s ability to deliver information requirements Co-ordinated delivery of all design information Manage information development and information approvals Confirm Design Deliverables Overall Lead for configuration management Production of design outputs related to a discipline-specific, package-based or time-based task Direct the production of task information in compliance with standards and methods It s essential you have: You will hold at least five years experience working in consultancy practice or for a large contractor in a design capacity Up to date knowledge of relevant Building Regulations and standards for electrical installations HNC/HND in a relevant discipline Proficient in Microsoft Office (including Word, Excel and PowerPoint) Good standard of literacy and numeracy Able to work effectively under pressure The salary for this position is paying 45k-50k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
Aug 31, 2022
Full time
My client in Ipswich Suffolk is currently in need of a Senior mechanical engineer due to expansion. Job Purpose To specify and design mechanical building services and to manage compliance and quality of installations as a Senior member of the team. Key responsibilities Enable integration and coordination of information within the information model Maintain and receive information into the information model Configure information for project outputs Populate the information exchange format for the information model Assure delivery of information exchanges Confirm supplier s ability to deliver information requirements Co-ordinated delivery of all design information Manage information development and information approvals Confirm Design Deliverables Overall Lead for configuration management Production of design outputs related to a discipline-specific, package-based or time-based task Direct the production of task information in compliance with standards and methods It s essential you have: You will hold at least five years experience working in consultancy practice or for a large contractor in a design capacity Up to date knowledge of relevant Building Regulations and standards for electrical installations HNC/HND in a relevant discipline Proficient in Microsoft Office (including Word, Excel and PowerPoint) Good standard of literacy and numeracy Able to work effectively under pressure The salary for this position is paying 45k-50k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
My client in Ipswich Suffolk is currently in need of a SNR Electrical engineer due to expansion. Job Purpose To manage the design and specification of electrical building services, compliance and quality of installations Key responsibilities Ensuring Asset Information requirements and/or MIDP requirements set out in the Employers Information Requirements and delivered on a BIM project. Enable reliable information exchange through a common data environment Enable integration and co-ordination of information within information model. Configure information for project outputs Assure delivery of information exchanges Confirm supplier s ability to deliver information requirements Co-ordinated delivery of all design information Manage information development and information approvals Confirm Design Deliverables Overall Lead for configuration management Production of design outputs related to a discipline specific, package-based or time-based task. It s essential you have: You will hold 5+ years experience within consultancy practice or a large contractor in a design capacity Up to date knowledge of relevant Building Regulations, standards for electrical installations HND/degree level qualification in a relevant discipline Working towards Charted or Incorporated engineer with CIBSE or IET Proficient in Microsoft Office (including Word, Excel and PowerPoint) The salary for this position is paying 45k - 50k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
Aug 31, 2022
Full time
My client in Ipswich Suffolk is currently in need of a SNR Electrical engineer due to expansion. Job Purpose To manage the design and specification of electrical building services, compliance and quality of installations Key responsibilities Ensuring Asset Information requirements and/or MIDP requirements set out in the Employers Information Requirements and delivered on a BIM project. Enable reliable information exchange through a common data environment Enable integration and co-ordination of information within information model. Configure information for project outputs Assure delivery of information exchanges Confirm supplier s ability to deliver information requirements Co-ordinated delivery of all design information Manage information development and information approvals Confirm Design Deliverables Overall Lead for configuration management Production of design outputs related to a discipline specific, package-based or time-based task. It s essential you have: You will hold 5+ years experience within consultancy practice or a large contractor in a design capacity Up to date knowledge of relevant Building Regulations, standards for electrical installations HND/degree level qualification in a relevant discipline Working towards Charted or Incorporated engineer with CIBSE or IET Proficient in Microsoft Office (including Word, Excel and PowerPoint) The salary for this position is paying 45k - 50k per annum which also includes a very good holiday package with additional benefits on top. If you would like to be considered for the role then please respond with an up to date CV
