Join us on this mission as a Assembly Operative working Manufacturing Department at the Chalgrove site. The purpose of the role is to be responsible for undertaking multi-skilled duties that will contribute to the success of the ejector seats produced onsite, to ultimately save lives. Aspects of the role include to: Handle explosive materials, goods and components carefully. Accurately interpret assembly drawings and production documents so that Part Numbers, Drawing Issues, Working Practices and Batches are Identified and recorded correctly. Assembly is carried out accurately, to required tolerances. Using appropriate Weighing Equipment and Tools relevant to specific batches. To undertake self-inspection and quality check of work undertaken. Updating SAP in order that work in progress is accurately recorded at all times. Characteristics & Skills Basic production / manufacturing experience gained from operating in a similar manufacturing environment Basic understanding and interpretation of engineering drawings Basic grounding in H&S policies and procedures Can work under pressure to balance competing job priorities to agreed deadlines. Team player with the ability to work independently. Strong communication skills - both verbal and written. Ability to follow instructions / requests whether verbal or written. You will have the opportunity to work alongside experts who will help you to obtain a wide understanding of an engineering business, and you'll develop new skills and gain a strong industry experience. Your benefits in detail Highly competitive 9% non-contributory pension scheme (18+) 4x salary Life Assurance (18+) Personalised training and development plan. Healthcare Cash Plan. 25-days annual leave plus bank holidays. The ability to purchase additional leave maximum 1 week. Opportunity to purchase additional annual leave. Cycle to work scheme.
Jan 01, 2026
Full time
Join us on this mission as a Assembly Operative working Manufacturing Department at the Chalgrove site. The purpose of the role is to be responsible for undertaking multi-skilled duties that will contribute to the success of the ejector seats produced onsite, to ultimately save lives. Aspects of the role include to: Handle explosive materials, goods and components carefully. Accurately interpret assembly drawings and production documents so that Part Numbers, Drawing Issues, Working Practices and Batches are Identified and recorded correctly. Assembly is carried out accurately, to required tolerances. Using appropriate Weighing Equipment and Tools relevant to specific batches. To undertake self-inspection and quality check of work undertaken. Updating SAP in order that work in progress is accurately recorded at all times. Characteristics & Skills Basic production / manufacturing experience gained from operating in a similar manufacturing environment Basic understanding and interpretation of engineering drawings Basic grounding in H&S policies and procedures Can work under pressure to balance competing job priorities to agreed deadlines. Team player with the ability to work independently. Strong communication skills - both verbal and written. Ability to follow instructions / requests whether verbal or written. You will have the opportunity to work alongside experts who will help you to obtain a wide understanding of an engineering business, and you'll develop new skills and gain a strong industry experience. Your benefits in detail Highly competitive 9% non-contributory pension scheme (18+) 4x salary Life Assurance (18+) Personalised training and development plan. Healthcare Cash Plan. 25-days annual leave plus bank holidays. The ability to purchase additional leave maximum 1 week. Opportunity to purchase additional annual leave. Cycle to work scheme.
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
Jan 01, 2026
Contractor
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms, this is a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters Based in Glasgow
Jan 01, 2026
Contractor
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms, this is a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters Based in Glasgow
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
Jan 01, 2026
Contractor
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
Jan 01, 2026
Contractor
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
We're working with a leading Marine Engineering company on a major refit project and are looking for skilled NVQ Level 3 / Apprenticeship-qualified MMA Welders to join the team at their site in Plymouth. Start ASAP (pending security clearance) Full SC Clearance required - must be British What we're looking for: Strong background in MMA welding (marine or heavy industry experience) Ability to pass (Paid) weld tests (12mm & 25mm plates - various positions) Excellent attention to detail and safety standards Team player with a proactive attitude Accommodation included MMA Welders for an exciting project based in Devon. The project is an ongoing project and Weld test is required. Basic 50 hours per week and Overtime available Welders must have strong experience and currently or previously coded in MMA All contractors are required to have a Security clearance before start date given.
Jan 01, 2026
Contractor
We're working with a leading Marine Engineering company on a major refit project and are looking for skilled NVQ Level 3 / Apprenticeship-qualified MMA Welders to join the team at their site in Plymouth. Start ASAP (pending security clearance) Full SC Clearance required - must be British What we're looking for: Strong background in MMA welding (marine or heavy industry experience) Ability to pass (Paid) weld tests (12mm & 25mm plates - various positions) Excellent attention to detail and safety standards Team player with a proactive attitude Accommodation included MMA Welders for an exciting project based in Devon. The project is an ongoing project and Weld test is required. Basic 50 hours per week and Overtime available Welders must have strong experience and currently or previously coded in MMA All contractors are required to have a Security clearance before start date given.
we are looking for experienced Platers / Fabricators to join a major long-term defence project. This is high-impact, heavy-industry work at the forefront of UK shipbuilding. You'll be part of an established fabrication team, building and shaping large, complex steel structures. Salary: 38,622 + up to 33% shift allowance + overtime Shift Patterns: Mon-Thurs days or nights, or a 3-day compressed weekend shift (Fri-Sun) Responsibilities: Heavy fabrication and plating of structural steel sections. Forming, cutting, burning, and shaping plate to tight tolerances using heavy workshop equipment. Assembling, aligning, and tack-welding structural units, bulkheads, foundations, and outfitting components. Reading and working from complex technical and fabrication drawings. Fitting a variety of ship structures, including bulkheads, deck structures, penetrations, supports, and access systems. Using oxy-acetylene cutting gear, grinders, plasma equipment, and other fabrication tools safely and effectively. Ensuring all work meets strict defence, safety, and quality standards. What you'll bring: Recognised Trade Papers/ Modern Apprenticeship Certificate essential (L3 SVQ/NVQ or L3 C&G) Strong background in heavy fabrication, shipbuilding, offshore, oil & gas, or large-scale industrial engineering. Solid knowledge of SHE, COSHH, and general site safety regulations. Comfortable working in confined spaces, at height, and in a busy industrial environment. Strong attention to detail, accuracy, and pride in delivering high-quality fabrication work. Security requirements: All applicants must have lived in the UK for the past 3 years minimum and be willing to undergo Baseline Personnel Security Standard (BPSS) screening.
Jan 01, 2026
Full time
we are looking for experienced Platers / Fabricators to join a major long-term defence project. This is high-impact, heavy-industry work at the forefront of UK shipbuilding. You'll be part of an established fabrication team, building and shaping large, complex steel structures. Salary: 38,622 + up to 33% shift allowance + overtime Shift Patterns: Mon-Thurs days or nights, or a 3-day compressed weekend shift (Fri-Sun) Responsibilities: Heavy fabrication and plating of structural steel sections. Forming, cutting, burning, and shaping plate to tight tolerances using heavy workshop equipment. Assembling, aligning, and tack-welding structural units, bulkheads, foundations, and outfitting components. Reading and working from complex technical and fabrication drawings. Fitting a variety of ship structures, including bulkheads, deck structures, penetrations, supports, and access systems. Using oxy-acetylene cutting gear, grinders, plasma equipment, and other fabrication tools safely and effectively. Ensuring all work meets strict defence, safety, and quality standards. What you'll bring: Recognised Trade Papers/ Modern Apprenticeship Certificate essential (L3 SVQ/NVQ or L3 C&G) Strong background in heavy fabrication, shipbuilding, offshore, oil & gas, or large-scale industrial engineering. Solid knowledge of SHE, COSHH, and general site safety regulations. Comfortable working in confined spaces, at height, and in a busy industrial environment. Strong attention to detail, accuracy, and pride in delivering high-quality fabrication work. Security requirements: All applicants must have lived in the UK for the past 3 years minimum and be willing to undergo Baseline Personnel Security Standard (BPSS) screening.
We're working with a leading Marine Engineering company on a major refit project and are looking for skilled NVQ Level 3 / Apprenticeship-qualified MMA Welders to join the team at their site in Plymouth. Start ASAP (pending security clearance) Full SC Clearance required - must be British What we're looking for: Strong background in MMA welding (marine or heavy industry experience) Ability to pass weld tests (12mm & 25mm plates - various positions) Excellent attention to detail and safety standards Team player with a proactive attitude Accommodation included MMA Welders for an exciting project based in Devon. The project is an ongoing project and Weld test is required. Basic 50 hours per week and Overtime available Welders must have strong experience and currently or previously coded in MMA All contractors are required to have a Security clearance before start date given.
Jan 01, 2026
Contractor
We're working with a leading Marine Engineering company on a major refit project and are looking for skilled NVQ Level 3 / Apprenticeship-qualified MMA Welders to join the team at their site in Plymouth. Start ASAP (pending security clearance) Full SC Clearance required - must be British What we're looking for: Strong background in MMA welding (marine or heavy industry experience) Ability to pass weld tests (12mm & 25mm plates - various positions) Excellent attention to detail and safety standards Team player with a proactive attitude Accommodation included MMA Welders for an exciting project based in Devon. The project is an ongoing project and Weld test is required. Basic 50 hours per week and Overtime available Welders must have strong experience and currently or previously coded in MMA All contractors are required to have a Security clearance before start date given.
A career in aerospace with a renowned British engineering company that plays a vital role in saving lives worldwide. Working here means contributing to the safety of pilots and aircrew across some of the most advanced military aircraft in operation. The mission is simple - to protect and preserve lives through world-class engineering and innovation. Join this mission as a Driver / Despatcher in the Transport department at our Denham site, where you'll be responsible for transporting company products to customers, suppliers, and other company locations. Aspects of the role include to: Loading and unloading goods and packages, checking quantities and all documentation. Consolidating deliveries and collections within the warehouse for various customers and suppliers. Transporting deliveries and collections to various sites in the UK to ensure the delivery paperwork is transacted accurately. Keeping the warehouse organised, clean and functional. Carry out basic maintenance and vehicle checks as required e.g. top up water, oil replace bulbs etc. Characteristics & Skills 23 years old or over for vehicle insurance purposes. Clean, Class 2 Category C Driver License with driving, loading, and unloading experience. ADR, high consequence goods certified. Classes 1-8,9 Known consignor experience. Counterbalance forklift experience Experience of a logistics function. Basic Computer Skills with Microsoft products. The ability to lift, carry and load boxes. Worked within a manufacturing organisation desirable. Your benefits in detail Highly competitive 9% non-contributory pension scheme (18+) 4x salary Life Assurance (18+) Personalised training and development plan. Healthcare Cash Plan. 25-days annual leave plus bank holidays. The ability to purchase additional leave maximum 1 week. Opportunity to purchase additional annual leave.
Jan 01, 2026
Full time
A career in aerospace with a renowned British engineering company that plays a vital role in saving lives worldwide. Working here means contributing to the safety of pilots and aircrew across some of the most advanced military aircraft in operation. The mission is simple - to protect and preserve lives through world-class engineering and innovation. Join this mission as a Driver / Despatcher in the Transport department at our Denham site, where you'll be responsible for transporting company products to customers, suppliers, and other company locations. Aspects of the role include to: Loading and unloading goods and packages, checking quantities and all documentation. Consolidating deliveries and collections within the warehouse for various customers and suppliers. Transporting deliveries and collections to various sites in the UK to ensure the delivery paperwork is transacted accurately. Keeping the warehouse organised, clean and functional. Carry out basic maintenance and vehicle checks as required e.g. top up water, oil replace bulbs etc. Characteristics & Skills 23 years old or over for vehicle insurance purposes. Clean, Class 2 Category C Driver License with driving, loading, and unloading experience. ADR, high consequence goods certified. Classes 1-8,9 Known consignor experience. Counterbalance forklift experience Experience of a logistics function. Basic Computer Skills with Microsoft products. The ability to lift, carry and load boxes. Worked within a manufacturing organisation desirable. Your benefits in detail Highly competitive 9% non-contributory pension scheme (18+) 4x salary Life Assurance (18+) Personalised training and development plan. Healthcare Cash Plan. 25-days annual leave plus bank holidays. The ability to purchase additional leave maximum 1 week. Opportunity to purchase additional annual leave.
Integration & Test Engineer (Infrastructure) My client is a principal organisation in the defence sector and successful applicants will have to pass Developed Vetting (DV) Security Clearance to undertake the role. We are seeking Integration & Test Engineers with strong infrastructure engineering experience to join a growing team working on mission-critical systems. The role is ideally suited individuals who enjoy integrating advanced technologies, ensuring reliability, and supporting secure, high-performance environments. You will work on integrating, testing, and securing a range of systems and applications, with a focus on designing, building, and maintaining scalable and reliable infrastructure. The position involves collaboration within a multi-disciplinary team and requires knowledge of Windows and Linux systems, DevSecOps practices, and modern infrastructure engineering tools such as cloud services, containerization, infrastructure-as-code, and performance optimisation. Key responsibilities include planning and running test and integration activities, developing automated test frameworks within CI/CD pipelines, debugging issues across the full technology stack, supporting the integration of large-scale solutions, and deploying systems across public, private, and hybrid cloud environments. Required experience includes hands-on involvement in test and integration work, operating within Agile and DevSecOps environments, working with Scrum, and using tools such as Jira, Confluence, Git, and GitLab. You should have experience developing and executing test plans, supporting formal product acceptance, building CI/CD pipelines, using automated testing frameworks, analysing automated test results, and working with Blue/Green deployment approaches. Experience debugging complex software systems and working with testing environments is also essential. Certifications such as ISTQB Foundation or Agile Testing qualifications are beneficial. Desired skills include experience maturing automated CI/CD pipelines for cloud deployments, using infrastructure-as-code for cloud-based services, working with AWS technologies such as EC2, EKS, Fargate, IAM, S3 and Lambda, using the AWS SDK to automate tasks, integrating hybrid-cloud applications, and using services such as CloudTrail for diagnostics. If you are passionate about Integration & Test and have a strong background in Infrastructure Engineering, we would welcome your application. We are committed to equal opportunities and an inclusive recruitment process. Adjustments can be provided upon request for any stage of the application or interview process.
Jan 01, 2026
Full time
Integration & Test Engineer (Infrastructure) My client is a principal organisation in the defence sector and successful applicants will have to pass Developed Vetting (DV) Security Clearance to undertake the role. We are seeking Integration & Test Engineers with strong infrastructure engineering experience to join a growing team working on mission-critical systems. The role is ideally suited individuals who enjoy integrating advanced technologies, ensuring reliability, and supporting secure, high-performance environments. You will work on integrating, testing, and securing a range of systems and applications, with a focus on designing, building, and maintaining scalable and reliable infrastructure. The position involves collaboration within a multi-disciplinary team and requires knowledge of Windows and Linux systems, DevSecOps practices, and modern infrastructure engineering tools such as cloud services, containerization, infrastructure-as-code, and performance optimisation. Key responsibilities include planning and running test and integration activities, developing automated test frameworks within CI/CD pipelines, debugging issues across the full technology stack, supporting the integration of large-scale solutions, and deploying systems across public, private, and hybrid cloud environments. Required experience includes hands-on involvement in test and integration work, operating within Agile and DevSecOps environments, working with Scrum, and using tools such as Jira, Confluence, Git, and GitLab. You should have experience developing and executing test plans, supporting formal product acceptance, building CI/CD pipelines, using automated testing frameworks, analysing automated test results, and working with Blue/Green deployment approaches. Experience debugging complex software systems and working with testing environments is also essential. Certifications such as ISTQB Foundation or Agile Testing qualifications are beneficial. Desired skills include experience maturing automated CI/CD pipelines for cloud deployments, using infrastructure-as-code for cloud-based services, working with AWS technologies such as EC2, EKS, Fargate, IAM, S3 and Lambda, using the AWS SDK to automate tasks, integrating hybrid-cloud applications, and using services such as CloudTrail for diagnostics. If you are passionate about Integration & Test and have a strong background in Infrastructure Engineering, we would welcome your application. We are committed to equal opportunities and an inclusive recruitment process. Adjustments can be provided upon request for any stage of the application or interview process.
My client is a principal organisation in the defence sector and successful applicants will have to pass Developed Vetting (DV) Security Clearance to undertake the role. We are recruiting Software Engineers to support a range of Defence, Cyber, and Intelligence programmes at our Gloucester site. These roles offer the opportunity to create an impact working on innovative projects while maintaining a strong work-life balance through flexible working options. This position can involve a variety of software development specialisms. You may focus on one area or work across multiple development disciplines, particularly within the Cyber domain. In this role, you may be involved in software development activities under guidance from a Software Engineering Lead, designing and developing tests to debug software, working with customer requirements to build mission and business applications, correcting program errors, preparing operating instructions, documenting development work, analysing system capabilities, and supporting automation efforts such as infrastructure-as-code, CI/CD, and automated testing. As a Software Engineer, you will be working with modern DevSecOps systems and contributing to the development of advanced, secure applications that support critical national capabilities. We are looking for individuals who are passionate about software engineering and eager to grow their careers in a forward-thinking technical environment. Required experience includes proficiency in modern Java and ideally some experience with other languages such as Python, C++, JavaScript or TypeScript. Experience developing on Linux, understanding mocking and unit-testing frameworks such as JUnit, and using Git version control are important. You should have knowledge of Agile development using Scrum, an understanding of relational or document databases such as Oracle or Mongo, experience with GitLab CI/CD pipelines, familiarity with the Atlassian suite, and knowledge of Elasticsearch, Kibana, and Hibernate. Desired skills include experience building software for cloud environments such as AWS, developing microservice or serverless architectures, understanding cloud CI/CD pipelines, and knowledge of AWS services such as EC2, EKS, Fargate, IAM, S3 and Lambda. Professional certifications such as Oracle Java Certification, AWS Certification, ISTQB, OSCP or CCNA are advantageous. We welcome applications from candidates with a wide range of backgrounds and experiences. Adjustments can be provided on request throughout the application and interview process. If you are enthusiastic about contributing to cutting-edge software engineering and ready to take on a new challenge, we would love to hear from you.
Jan 01, 2026
Full time
My client is a principal organisation in the defence sector and successful applicants will have to pass Developed Vetting (DV) Security Clearance to undertake the role. We are recruiting Software Engineers to support a range of Defence, Cyber, and Intelligence programmes at our Gloucester site. These roles offer the opportunity to create an impact working on innovative projects while maintaining a strong work-life balance through flexible working options. This position can involve a variety of software development specialisms. You may focus on one area or work across multiple development disciplines, particularly within the Cyber domain. In this role, you may be involved in software development activities under guidance from a Software Engineering Lead, designing and developing tests to debug software, working with customer requirements to build mission and business applications, correcting program errors, preparing operating instructions, documenting development work, analysing system capabilities, and supporting automation efforts such as infrastructure-as-code, CI/CD, and automated testing. As a Software Engineer, you will be working with modern DevSecOps systems and contributing to the development of advanced, secure applications that support critical national capabilities. We are looking for individuals who are passionate about software engineering and eager to grow their careers in a forward-thinking technical environment. Required experience includes proficiency in modern Java and ideally some experience with other languages such as Python, C++, JavaScript or TypeScript. Experience developing on Linux, understanding mocking and unit-testing frameworks such as JUnit, and using Git version control are important. You should have knowledge of Agile development using Scrum, an understanding of relational or document databases such as Oracle or Mongo, experience with GitLab CI/CD pipelines, familiarity with the Atlassian suite, and knowledge of Elasticsearch, Kibana, and Hibernate. Desired skills include experience building software for cloud environments such as AWS, developing microservice or serverless architectures, understanding cloud CI/CD pipelines, and knowledge of AWS services such as EC2, EKS, Fargate, IAM, S3 and Lambda. Professional certifications such as Oracle Java Certification, AWS Certification, ISTQB, OSCP or CCNA are advantageous. We welcome applications from candidates with a wide range of backgrounds and experiences. Adjustments can be provided on request throughout the application and interview process. If you are enthusiastic about contributing to cutting-edge software engineering and ready to take on a new challenge, we would love to hear from you.
This is an excellent opportunity to deliver fully tested, high-tech, cutting-edge products. You will develop new capabilities and work on some of our clients most complex system configurations. A strong engineering background and high level of technical skill are essential for success in this role. Key Responsibilities Deliver fully functional, tested products in strict accordance with test procedures Take ownership of allocated products and proactively resolve issues Ensure all test procedures are followed accurately and that documentation is complete, correct, and signed off Consistently meet target times and support continuous improvement to reduce test time Drive improved product quality through effective data capture (FRACAS), accurate fault reporting, and detailed analysis Support the Test Team Leader in achieving on-time delivery against the manufacturing plan Contribute to the improvement of quality, Health & Safety, build/test cleanliness, and 5S standards within the department Support customer pre-acceptance visits Promote 5S principles within the test department Occasionally visit customer sites to support system installation and commissioning About You Time-served electrical apprenticeship or City & Guilds Part 3, or qualified to HND, HNC, or BTEC Level 3 (electrical) Ability to strictly follow test procedures and accurately report results Skilled in fast, accurate fault diagnosis to component level Understanding of quality and Health & Safety implications of test procedures Ability to investigate, analyse problems, and provide solutions IT literate Self-motivated team player with the ability to work with minimal supervision Strong communication skills, able to interact at all levels Displays enthusiasm, pace, and energy High degree of customer focus Proactive in suggesting ideas and committed to completing improvements despite obstacles Willingness to travel when required Working Pattern You will work on a rotating shift pattern : Each working week: 4 shifts of 8 hours + 1 shift of 5 hours Current shifts: Early Shift: 06:00am - 2.00pm Monday to Thursday, Friday 6.00am - 11.00am Day shift: 8.00am to 4.30pm Monday to Thursday, Friday 8.00am to 1.00pm Afternoon Shift: 2.00pm to 10.00pm Monday to Thursday, Friday 11.00am to 4.00pm Benefits Our Client offers: Competitive starting salary Structured career development opportunities Good work-life balance Private healthcare Share incentive plan 25 days annual leave Half-days on Fridays Defined contribution Group Personal Pension Plan Flexible benefits package tailored to your needs
Jan 01, 2026
Full time
This is an excellent opportunity to deliver fully tested, high-tech, cutting-edge products. You will develop new capabilities and work on some of our clients most complex system configurations. A strong engineering background and high level of technical skill are essential for success in this role. Key Responsibilities Deliver fully functional, tested products in strict accordance with test procedures Take ownership of allocated products and proactively resolve issues Ensure all test procedures are followed accurately and that documentation is complete, correct, and signed off Consistently meet target times and support continuous improvement to reduce test time Drive improved product quality through effective data capture (FRACAS), accurate fault reporting, and detailed analysis Support the Test Team Leader in achieving on-time delivery against the manufacturing plan Contribute to the improvement of quality, Health & Safety, build/test cleanliness, and 5S standards within the department Support customer pre-acceptance visits Promote 5S principles within the test department Occasionally visit customer sites to support system installation and commissioning About You Time-served electrical apprenticeship or City & Guilds Part 3, or qualified to HND, HNC, or BTEC Level 3 (electrical) Ability to strictly follow test procedures and accurately report results Skilled in fast, accurate fault diagnosis to component level Understanding of quality and Health & Safety implications of test procedures Ability to investigate, analyse problems, and provide solutions IT literate Self-motivated team player with the ability to work with minimal supervision Strong communication skills, able to interact at all levels Displays enthusiasm, pace, and energy High degree of customer focus Proactive in suggesting ideas and committed to completing improvements despite obstacles Willingness to travel when required Working Pattern You will work on a rotating shift pattern : Each working week: 4 shifts of 8 hours + 1 shift of 5 hours Current shifts: Early Shift: 06:00am - 2.00pm Monday to Thursday, Friday 6.00am - 11.00am Day shift: 8.00am to 4.30pm Monday to Thursday, Friday 8.00am to 1.00pm Afternoon Shift: 2.00pm to 10.00pm Monday to Thursday, Friday 11.00am to 4.00pm Benefits Our Client offers: Competitive starting salary Structured career development opportunities Good work-life balance Private healthcare Share incentive plan 25 days annual leave Half-days on Fridays Defined contribution Group Personal Pension Plan Flexible benefits package tailored to your needs
We are recruiting Senior Software Engineers to support a range of Defence, Cyber, and Intelligence programmes based in Gloucester. These roles offer meaningful, impactful work with strong opportunities for professional development, alongside a healthy work-life balance through flexible and hybrid working options. You'll contribute to the development of cutting-edge DevSecOps software systems and applications, playing a key role in driving innovation and protecting critical digital infrastructure in the UK. Whether you specialise in a single area or operate across multiple software development disciplines with a focus on the cyber domain, your expertise will be Security Clearance: DV clearance is required to start. If you are passionate about software engineering and ready to take the next step in your career, we would love to hear from you. Even if you don't meet every requirement, your skills and perspective may still be a great fit-so we encourage you to apply.valued and supported. Role Responsibilities: Carry out software development activities under the guidance of a Software Engineering Lead. Design and develop tests for software debugging. Translate customer requirements into software features using appropriate standards, tools, and processes across the full development lifecycle. Identify and correct program errors. Prepare operating instructions and maintain clear documentation. Analyse system capabilities and requirements to resolve software development questions related to intent, input, output, and control mechanisms. Champion automation including Infrastructure as Code, CI/CD, and test automation. Required Skills and Experience: Strong proficiency in modern Java; knowledge of Python, C++, JavaScript, TypeScript, or React is a plus. Experience developing on Linux. Solid understanding of mocking and unit-testing frameworks such as JUnit 5. Experience with Git version control. Proficient in Agile development using SCRUM. Experience with Oracle or other relational databases and/or MongoDB. Experience with GitLab CI/CD pipelines. Experience working with Apache NiFi. Familiarity with Atlassian tools including Bitbucket, Jira, and Confluence. Experience with Elasticsearch and Kibana. Experience with Hibernate. Experience with AWS services such as EC2, EKS, Fargate, IAM, S3, and Lambda. Experience building CI/CD pipelines for cloud deployments. Desired Skills: Experience developing software for cloud deployment, particularly AWS. Experience building microservices or serverless architectures. Understanding challenges of migrating on-premise workloads to cloud environments. Experience with JSF (PrimeFaces). Preferred Qualifications or Certifications: Oracle Java Certification AWS Certification ISTQB Certification OSCP Certification CCNA Certification
Jan 01, 2026
Full time
We are recruiting Senior Software Engineers to support a range of Defence, Cyber, and Intelligence programmes based in Gloucester. These roles offer meaningful, impactful work with strong opportunities for professional development, alongside a healthy work-life balance through flexible and hybrid working options. You'll contribute to the development of cutting-edge DevSecOps software systems and applications, playing a key role in driving innovation and protecting critical digital infrastructure in the UK. Whether you specialise in a single area or operate across multiple software development disciplines with a focus on the cyber domain, your expertise will be Security Clearance: DV clearance is required to start. If you are passionate about software engineering and ready to take the next step in your career, we would love to hear from you. Even if you don't meet every requirement, your skills and perspective may still be a great fit-so we encourage you to apply.valued and supported. Role Responsibilities: Carry out software development activities under the guidance of a Software Engineering Lead. Design and develop tests for software debugging. Translate customer requirements into software features using appropriate standards, tools, and processes across the full development lifecycle. Identify and correct program errors. Prepare operating instructions and maintain clear documentation. Analyse system capabilities and requirements to resolve software development questions related to intent, input, output, and control mechanisms. Champion automation including Infrastructure as Code, CI/CD, and test automation. Required Skills and Experience: Strong proficiency in modern Java; knowledge of Python, C++, JavaScript, TypeScript, or React is a plus. Experience developing on Linux. Solid understanding of mocking and unit-testing frameworks such as JUnit 5. Experience with Git version control. Proficient in Agile development using SCRUM. Experience with Oracle or other relational databases and/or MongoDB. Experience with GitLab CI/CD pipelines. Experience working with Apache NiFi. Familiarity with Atlassian tools including Bitbucket, Jira, and Confluence. Experience with Elasticsearch and Kibana. Experience with Hibernate. Experience with AWS services such as EC2, EKS, Fargate, IAM, S3, and Lambda. Experience building CI/CD pipelines for cloud deployments. Desired Skills: Experience developing software for cloud deployment, particularly AWS. Experience building microservices or serverless architectures. Understanding challenges of migrating on-premise workloads to cloud environments. Experience with JSF (PrimeFaces). Preferred Qualifications or Certifications: Oracle Java Certification AWS Certification ISTQB Certification OSCP Certification CCNA Certification
Job Title: HR Junior Administrator Contract Duration: 6 Months - Umbrella An excellent opportunity for an Assistant to join a leading renewable energy company. Familiarity with basic accounting principles and invoice processing procedures is essential Key Responsibilities: Support HR operations, including ID verification, data entry, and employee lifecycle tasks. Address employee queries professionally and promptly, ensuring a positive experience. Maintain high accuracy and quality standards while adhering to compliance procedures. Communicate effectively through phone, email, and Teams. Qualifications/Requirements: Proficient in English (both verbal and written). Relevant experience in a service-oriented environment with proven success. Ability to work efficiently in a fast-paced, evolving work environment, managing multiple stakeholders. Strong communication skills with a focus on delivering top-notch customer service. Capable of prioritizing tasks with varying deadlines and complexities. Please apply on the below link or if you require any further information please contact Alisha at Mane on (phone number removed) or email (url removed)
Jan 01, 2026
Contractor
Job Title: HR Junior Administrator Contract Duration: 6 Months - Umbrella An excellent opportunity for an Assistant to join a leading renewable energy company. Familiarity with basic accounting principles and invoice processing procedures is essential Key Responsibilities: Support HR operations, including ID verification, data entry, and employee lifecycle tasks. Address employee queries professionally and promptly, ensuring a positive experience. Maintain high accuracy and quality standards while adhering to compliance procedures. Communicate effectively through phone, email, and Teams. Qualifications/Requirements: Proficient in English (both verbal and written). Relevant experience in a service-oriented environment with proven success. Ability to work efficiently in a fast-paced, evolving work environment, managing multiple stakeholders. Strong communication skills with a focus on delivering top-notch customer service. Capable of prioritizing tasks with varying deadlines and complexities. Please apply on the below link or if you require any further information please contact Alisha at Mane on (phone number removed) or email (url removed)
MANE is seeking a Composite Laminator to work with advanced pre-preg carbon fibre materials on high-quality composite components. You'll be involved in kitting, lay-up, vacuum bagging and de-bagging, working with precision to engineering specifications. The ideal candidate will be confident in reading complex engineering drawings and working from moulds to deliver consistently high standards. Key Duties & Responsibilities Prepare tools by cleaning and applying release agents Perform accurate kitting and lay-up of pre-preg materials Apply vacuum bagging techniques and prepare breather bag kits Run curing operations using autoclaves, ovens, and vacuum systems Monitor material shelf life and maintain traceability Adhere to all quality, safety, and process procedures Participate in daily team meetings to review targets and updates Identify and escalate any production or quality issues promptly Qualifications & Experience Manufacturing or engineering background preferred Pre-preg carbon fibre lay-up experience advantageous Ability to read and interpret engineering drawings Knowledge of material handling and curing processes beneficial Experience within aerospace or automotive industry Skills & Attributes Excellent attention to detail Strong communication skills Organised and able to multi-task Able to work independently and meet deadlines Good teamwork and decision-making capability Ability to visualise and plan tasks effectively Schedule Monday-Thursday: 8:00am-4:00pm Friday: 8:00am-1:00pm Overtime available Physical Requirements Ability to perform manual tasks for extended periods
Jan 01, 2026
Contractor
MANE is seeking a Composite Laminator to work with advanced pre-preg carbon fibre materials on high-quality composite components. You'll be involved in kitting, lay-up, vacuum bagging and de-bagging, working with precision to engineering specifications. The ideal candidate will be confident in reading complex engineering drawings and working from moulds to deliver consistently high standards. Key Duties & Responsibilities Prepare tools by cleaning and applying release agents Perform accurate kitting and lay-up of pre-preg materials Apply vacuum bagging techniques and prepare breather bag kits Run curing operations using autoclaves, ovens, and vacuum systems Monitor material shelf life and maintain traceability Adhere to all quality, safety, and process procedures Participate in daily team meetings to review targets and updates Identify and escalate any production or quality issues promptly Qualifications & Experience Manufacturing or engineering background preferred Pre-preg carbon fibre lay-up experience advantageous Ability to read and interpret engineering drawings Knowledge of material handling and curing processes beneficial Experience within aerospace or automotive industry Skills & Attributes Excellent attention to detail Strong communication skills Organised and able to multi-task Able to work independently and meet deadlines Good teamwork and decision-making capability Ability to visualise and plan tasks effectively Schedule Monday-Thursday: 8:00am-4:00pm Friday: 8:00am-1:00pm Overtime available Physical Requirements Ability to perform manual tasks for extended periods
Mane Contract Services
Nottingham, Nottinghamshire
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
Jan 01, 2026
Contractor
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
One of my leading defence clients is seeking Mechanical Design Engineers to support the design and development of high-integrity components and mechanisms for military vehicle systems. The role covers concept design, CAD modelling, prototyping, testing, and documentation, delivering robust solutions for demanding environments. Key Responsibilities: Develop concept and detailed designs using CREO Parametric. Produce engineering calculations and analysis to support design decisions. Work with SMEs and design authorities on subsystem solutions. Support prototype build, testing, and design proving. Ensure compliance with safety, quality, and industry standards. Essential Skills and Experience: Experience in the defence sector, ideally with Armoured Fighting Vehicles and related systems. Strong mechanical design background, including complex mechanisms. Proficient in CREO and Windchill. Experience designing for harsh environments. Strong documentation, problem-solving, and coordination skills. Additional Information: On-site presence required on Mondays and Tuesdays One to two interview stages. Feedback on applications typically provided within 2-3 days.
Jan 01, 2026
Contractor
One of my leading defence clients is seeking Mechanical Design Engineers to support the design and development of high-integrity components and mechanisms for military vehicle systems. The role covers concept design, CAD modelling, prototyping, testing, and documentation, delivering robust solutions for demanding environments. Key Responsibilities: Develop concept and detailed designs using CREO Parametric. Produce engineering calculations and analysis to support design decisions. Work with SMEs and design authorities on subsystem solutions. Support prototype build, testing, and design proving. Ensure compliance with safety, quality, and industry standards. Essential Skills and Experience: Experience in the defence sector, ideally with Armoured Fighting Vehicles and related systems. Strong mechanical design background, including complex mechanisms. Proficient in CREO and Windchill. Experience designing for harsh environments. Strong documentation, problem-solving, and coordination skills. Additional Information: On-site presence required on Mondays and Tuesdays One to two interview stages. Feedback on applications typically provided within 2-3 days.
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
Jan 01, 2026
Contractor
We're hiring skilled Sheet Metal Workers to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. What you'll be doing: Manufacturing and installing marine-grade ventilation, HVAC systems, and interior furnishings. Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. What you'll bring: Recognised Trade Papers / Modern Apprenticeship Certificate - essential SVQ Level 3 / NVQ Level 3 / City & Guilds Level 3. Experience in large-scale marine, oil & gas, or industrial manufacturing. Solid understanding of SHE, COSHH, and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work. Why apply? Long-term stable project with a world-class reputation Structured shifts with excellent allowances Be part of a skilled workforce building something that truly matters
Compliance Investigator - Aviation MRO We are a leading UK helicopter organisation specialising in civil and military aviation support. Our Oxford Airport site serves as a national hub for helicopter maintenance, bespoke completions, engineering, training, and spares support. With extensive in-house capabilities-covering design, customisation, installation, flight-testing, certification, and technical support-we deliver high-quality solutions across multiple UK locations and maintain long-standing partnerships within both the civil and defence sectors. We are seeking a Compliance Investigator to join our dedicated Compliance Team in Oxford. This role is vital in ensuring our operations remain aligned with regulatory requirements, internal quality standards, and our commitment to safety and continuous improvement. The position requires travel to all company sites across the UK to support consistent compliance practices. About the Role As a Compliance Investigator within our Helicopter Maintenance Repair Organisation (MRO), you will conduct in-depth investigations into compliance issues, identify root causes, and drive corrective and preventive actions across the business. You will play a key role in promoting safety, regulatory compliance, and operational excellence. Key Responsibilities Compliance Investigations & Root Cause Analysis Lead thorough investigations into compliance incidents, discrepancies, and safety concerns. Conduct MEDA investigations as required. Apply recognised RCA methods (5 Whys, Fishbone/Ishikawa, Fault Tree Analysis). Identify Human Factors and Human Performance elements contributing to events. Detect trends and systemic issues to ensure lasting corrective actions. Regulatory & Quality Assurance Ensure compliance with UK CAA/EASA Part 145, Part CAMO, Part 21G, and relevant military aviation regulations (MRP 145, MIL CAMO). Work closely with Quality Assurance teams to refine audit and inspection processes. Support regulatory audits and lead the closure of non-conformances. Process Improvement & Risk Mitigation Partner with engineering, maintenance, production, and safety teams to strengthen processes. Develop and recommend risk-mitigation strategies. Promote best practices in safety, human factors, and compliance monitoring. Stakeholder Engagement & Reporting Produce detailed investigation reports for senior management and regulatory bodies. Maintain clear, accurate records of investigations and CAPA activity. Build strong relationships across operational teams to enhance compliance awareness. Skills & Experience Essential Experience in compliance investigations within aviation maintenance or aerospace environments. Strong expertise in Root Cause Analysis and problem-solving tools. Solid understanding of UK CAA/EASA regulatory frameworks and relevant MRO standards. Knowledge of Human Factors and Human Performance principles. Experience in audits, inspections, and analysis of technical/maintenance documentation. Excellent report-writing, analytical, and communication skills. Proficiency with QMS, compliance monitoring systems, and data analysis tools. Desirable Experience with Lean, Six Sigma, or continuous improvement methodologies. MEDA investigation experience. Familiarity with Part CAMO, Part 21G, military aviation regulations (MAA, MRP145, MIL CAMO). Knowledge of ISO 9001, AS9100. Strong interpersonal skills with the ability to influence at all levels. Education & Qualifications Essential Formal training in RCA and investigative techniques. Ability to obtain Security Clearance (SC) and DBS clearance. Desirable Aviation Safety Management Systems (SMS) certification. Auditor or Lead Auditor qualification. Lean Six Sigma Green/Black Belt. Extensive experience in aviation compliance, investigation, or audit functions. Additional Requirements Eligibility for SC clearance and ability to meet DBS requirements. Must satisfy Export Compliance Regulations.
Jan 01, 2026
Contractor
Compliance Investigator - Aviation MRO We are a leading UK helicopter organisation specialising in civil and military aviation support. Our Oxford Airport site serves as a national hub for helicopter maintenance, bespoke completions, engineering, training, and spares support. With extensive in-house capabilities-covering design, customisation, installation, flight-testing, certification, and technical support-we deliver high-quality solutions across multiple UK locations and maintain long-standing partnerships within both the civil and defence sectors. We are seeking a Compliance Investigator to join our dedicated Compliance Team in Oxford. This role is vital in ensuring our operations remain aligned with regulatory requirements, internal quality standards, and our commitment to safety and continuous improvement. The position requires travel to all company sites across the UK to support consistent compliance practices. About the Role As a Compliance Investigator within our Helicopter Maintenance Repair Organisation (MRO), you will conduct in-depth investigations into compliance issues, identify root causes, and drive corrective and preventive actions across the business. You will play a key role in promoting safety, regulatory compliance, and operational excellence. Key Responsibilities Compliance Investigations & Root Cause Analysis Lead thorough investigations into compliance incidents, discrepancies, and safety concerns. Conduct MEDA investigations as required. Apply recognised RCA methods (5 Whys, Fishbone/Ishikawa, Fault Tree Analysis). Identify Human Factors and Human Performance elements contributing to events. Detect trends and systemic issues to ensure lasting corrective actions. Regulatory & Quality Assurance Ensure compliance with UK CAA/EASA Part 145, Part CAMO, Part 21G, and relevant military aviation regulations (MRP 145, MIL CAMO). Work closely with Quality Assurance teams to refine audit and inspection processes. Support regulatory audits and lead the closure of non-conformances. Process Improvement & Risk Mitigation Partner with engineering, maintenance, production, and safety teams to strengthen processes. Develop and recommend risk-mitigation strategies. Promote best practices in safety, human factors, and compliance monitoring. Stakeholder Engagement & Reporting Produce detailed investigation reports for senior management and regulatory bodies. Maintain clear, accurate records of investigations and CAPA activity. Build strong relationships across operational teams to enhance compliance awareness. Skills & Experience Essential Experience in compliance investigations within aviation maintenance or aerospace environments. Strong expertise in Root Cause Analysis and problem-solving tools. Solid understanding of UK CAA/EASA regulatory frameworks and relevant MRO standards. Knowledge of Human Factors and Human Performance principles. Experience in audits, inspections, and analysis of technical/maintenance documentation. Excellent report-writing, analytical, and communication skills. Proficiency with QMS, compliance monitoring systems, and data analysis tools. Desirable Experience with Lean, Six Sigma, or continuous improvement methodologies. MEDA investigation experience. Familiarity with Part CAMO, Part 21G, military aviation regulations (MAA, MRP145, MIL CAMO). Knowledge of ISO 9001, AS9100. Strong interpersonal skills with the ability to influence at all levels. Education & Qualifications Essential Formal training in RCA and investigative techniques. Ability to obtain Security Clearance (SC) and DBS clearance. Desirable Aviation Safety Management Systems (SMS) certification. Auditor or Lead Auditor qualification. Lean Six Sigma Green/Black Belt. Extensive experience in aviation compliance, investigation, or audit functions. Additional Requirements Eligibility for SC clearance and ability to meet DBS requirements. Must satisfy Export Compliance Regulations.
Job Title: Fabricator - Plater What You'll Be Doing Interpreting engineering drawings Marking-off materials Plate preparation using various methods (oxy-fuel gas cutting, hand grinding) Assembling ship structures including shell, decks, bulkheads, frames, and longitudinals Fitting, fairing, and tack welding steelwork using fairing aids Fabricating ship components such as seats, ladders, false flooring, and panels Outfitting ship items including hatches, watertight doors, equipment seats, and false flooring Forming material using machine tools (rollers, flanging machines, guillotines, croppers, mechanical saws) Skills and Experience Required Modern Apprenticeship / Trade Papers (SVQ Level 3 or equivalent required) Proven experience in fabrication Understanding of manufacturing processes Ability to tack weld Oxy-fuel and/or plasma cutting experience Strong understanding of SHE principles and risk assessments Ability to work in confined spaces and at height Relevant safety certifications (SHE induction, working at height, risk assessment, etc.) Background in a major construction or manufacturing environment Please ensure you attach copies of your qualifications when applying. Benefits A competitive benefits package is offered, which may include: Pension scheme Employee share plans Flexible, discounted health, wellbeing, and lifestyle benefits Green car scheme Private healthcare options Shopping and lifestyle discounts Eligibility for an annual incentive (role-dependent) About the Fabricator Team You will be joining a team responsible for producing large-scale marine and structural components critical to major engineering projects. The environment is fast-paced, innovative, and focused on delivering high-quality work. The team operates a variety of shift patterns, including day, back, night, and weekend shifts. Working Environment This is an opportunity to work in a modern, forward-looking engineering environment that values: Inclusive culture Diversity of thought Integrity and merit Personal and professional development If you require reasonable adjustments during the recruitment process (e.g., due to dyslexia, autism, anxiety, or other conditions), please inform the recruitment team. Security Requirements Some roles may be subject to security and export control restrictions. Applicants may need to meet baseline security checks and-in some cases-higher-level national security vetting, which can require 5-10 years of continuous UK residency. Closing Date: 21st December 2025 The vacancy may close early if sufficient applications are received, so early submission is encouraged.
Jan 01, 2026
Full time
Job Title: Fabricator - Plater What You'll Be Doing Interpreting engineering drawings Marking-off materials Plate preparation using various methods (oxy-fuel gas cutting, hand grinding) Assembling ship structures including shell, decks, bulkheads, frames, and longitudinals Fitting, fairing, and tack welding steelwork using fairing aids Fabricating ship components such as seats, ladders, false flooring, and panels Outfitting ship items including hatches, watertight doors, equipment seats, and false flooring Forming material using machine tools (rollers, flanging machines, guillotines, croppers, mechanical saws) Skills and Experience Required Modern Apprenticeship / Trade Papers (SVQ Level 3 or equivalent required) Proven experience in fabrication Understanding of manufacturing processes Ability to tack weld Oxy-fuel and/or plasma cutting experience Strong understanding of SHE principles and risk assessments Ability to work in confined spaces and at height Relevant safety certifications (SHE induction, working at height, risk assessment, etc.) Background in a major construction or manufacturing environment Please ensure you attach copies of your qualifications when applying. Benefits A competitive benefits package is offered, which may include: Pension scheme Employee share plans Flexible, discounted health, wellbeing, and lifestyle benefits Green car scheme Private healthcare options Shopping and lifestyle discounts Eligibility for an annual incentive (role-dependent) About the Fabricator Team You will be joining a team responsible for producing large-scale marine and structural components critical to major engineering projects. The environment is fast-paced, innovative, and focused on delivering high-quality work. The team operates a variety of shift patterns, including day, back, night, and weekend shifts. Working Environment This is an opportunity to work in a modern, forward-looking engineering environment that values: Inclusive culture Diversity of thought Integrity and merit Personal and professional development If you require reasonable adjustments during the recruitment process (e.g., due to dyslexia, autism, anxiety, or other conditions), please inform the recruitment team. Security Requirements Some roles may be subject to security and export control restrictions. Applicants may need to meet baseline security checks and-in some cases-higher-level national security vetting, which can require 5-10 years of continuous UK residency. Closing Date: 21st December 2025 The vacancy may close early if sufficient applications are received, so early submission is encouraged.
