Technician Radway Green 37 hours per week 12 Months Inside IR35 BAE Systems is looking for a time-served Technician to join the Tube Vent department at Radway Green, supporting the manufacture of 13mm cases. Working across a section with 40 machines and a range of cold forming and drawing operations, you will be responsible for setting, operating, maintaining and repairing production equipment. This is a varied, hands-on position, with different machines and challenges to work on each day. Press experience is particularly sought after to complement the existing team's CNC knowledge. Training and development will be provided to build your understanding of the department's equipment and processes. Responsibilities • Set and operate production machinery to meet quality, output and delivery targets. • Carry out preventative maintenance, fault-finding and reactive mechanical repairs. • Support production across 40 machines, including equipment used for cold forming and drawing operations. • Maintain the safe condition of machinery, completing relevant checks and escalating safety concerns. • Complete dynamic risk assessments for non-standard tasks and follow safe working procedures. • Identify and resolve issues affecting safety, quality and production performance. • Contribute to daily production meetings and continuous improvement activities. • Support apprentices with their practical development and understanding of the equipment. Skills and experience • A time-served engineering apprenticeship, with experience in metal forming or turning. • Experience working in a mechanical manufacturing environment. • Experience setting and operating power presses, with press experience preferred over a predominantly CNC background. • Practical experience of machinery maintenance, mechanical fault-finding and repair. • Press inspection training to carry out press safety checks in line with PUWER requirements. • Ability to work across a range of equipment and adapt to changing production priorities. Desirable • Experience of cold forming or drawing operations. • Basic understanding of Statistical Process Control (SPC) and Keyence measuring equipment. • Experience working in a medium-volume production environment against quality and delivery targets. • Computer literacy, including Microsoft Office, SAP and SuccessFactors. Pay rates: Standard shift (07:00-16:00) - £21.29p/hr PAYE Two-Shift (06:00-14:00/14:00-22:00 swap weekly) - £25.12p/hr PAYE Three-Shift (06:00-14:00/14:00-22:00/22:00-06:00 swap weekly) - £26.61p/hr PAYE Shift patterns are selected by the client. To apply you must be available for all shifts. All pay rates are advertised as a PAYE rate. The positions on offer could lead to a permanent role at BAE Systems. Morson is acting as an employment business in relation to this vacancy.
Nov 17, 2026
Full time
Technician Radway Green 37 hours per week 12 Months Inside IR35 BAE Systems is looking for a time-served Technician to join the Tube Vent department at Radway Green, supporting the manufacture of 13mm cases. Working across a section with 40 machines and a range of cold forming and drawing operations, you will be responsible for setting, operating, maintaining and repairing production equipment. This is a varied, hands-on position, with different machines and challenges to work on each day. Press experience is particularly sought after to complement the existing team's CNC knowledge. Training and development will be provided to build your understanding of the department's equipment and processes. Responsibilities • Set and operate production machinery to meet quality, output and delivery targets. • Carry out preventative maintenance, fault-finding and reactive mechanical repairs. • Support production across 40 machines, including equipment used for cold forming and drawing operations. • Maintain the safe condition of machinery, completing relevant checks and escalating safety concerns. • Complete dynamic risk assessments for non-standard tasks and follow safe working procedures. • Identify and resolve issues affecting safety, quality and production performance. • Contribute to daily production meetings and continuous improvement activities. • Support apprentices with their practical development and understanding of the equipment. Skills and experience • A time-served engineering apprenticeship, with experience in metal forming or turning. • Experience working in a mechanical manufacturing environment. • Experience setting and operating power presses, with press experience preferred over a predominantly CNC background. • Practical experience of machinery maintenance, mechanical fault-finding and repair. • Press inspection training to carry out press safety checks in line with PUWER requirements. • Ability to work across a range of equipment and adapt to changing production priorities. Desirable • Experience of cold forming or drawing operations. • Basic understanding of Statistical Process Control (SPC) and Keyence measuring equipment. • Experience working in a medium-volume production environment against quality and delivery targets. • Computer literacy, including Microsoft Office, SAP and SuccessFactors. Pay rates: Standard shift (07:00-16:00) - £21.29p/hr PAYE Two-Shift (06:00-14:00/14:00-22:00 swap weekly) - £25.12p/hr PAYE Three-Shift (06:00-14:00/14:00-22:00/22:00-06:00 swap weekly) - £26.61p/hr PAYE Shift patterns are selected by the client. To apply you must be available for all shifts. All pay rates are advertised as a PAYE rate. The positions on offer could lead to a permanent role at BAE Systems. Morson is acting as an employment business in relation to this vacancy.
Graduate Product/Sales Manager What do we want to achieve? Do you have a STEM degree and the drive to build a career in sales, product strategy and customer relationship management within the maritime and defence industry? As a Graduate Product/Sales Manager , you will join the Surface Ship Systems Division at TKMS ATLAS UK, helping to develop our Ships Products and support customer bid management a click apply for full job details
Nov 17, 2026
Full time
Graduate Product/Sales Manager What do we want to achieve? Do you have a STEM degree and the drive to build a career in sales, product strategy and customer relationship management within the maritime and defence industry? As a Graduate Product/Sales Manager , you will join the Surface Ship Systems Division at TKMS ATLAS UK, helping to develop our Ships Products and support customer bid management a click apply for full job details
Quality Control Administrator Location: Oxfordshire Rate: £20.00 per hour Umbrella Contract: Ongoing Hours: Full-time Morson are recruiting on behalf of a leading Formula 1 team based in Oxfordshire for a Quality Control Administrator to provide administrative support to their Quality Control function. This is an excellent opportunity to join a fast-paced motorsport manufacturing environment, supporting inspection activities, maintaining accurate quality records and ensuring components move efficiently through the production process. Key Responsibilities Provide administrative support to the Quality Control and Inspection team. Monitor and manage inspection queues, ensuring components are prioritised in line with production requirements. Liaise with Production, Planning, Manufacturing and Stores to coordinate and expedite urgent requirements. Process inspected components accurately through the business ERP system and release them to the next stage of production. Chase outstanding components and monitor their progress through Quality Control. Track and follow up on Non-Conformance Reports (NCRs), ensuring actions are completed promptly. Maintain accurate quality, inspection and production records, including electronic and hard-copy documentation. Prepare and distribute reports relating to inspection activity and production progress. Work closely with internal departments to resolve delays and maintain production workflow. Skills & Experience Previous experience in an administrative or coordination role within an engineering or manufacturing environment. Engineering background with the ability to read and interpret engineering drawings. Understanding of technical specifications and manufacturing processes. Experience using ERP/MRP systems, ideally Microsoft Dynamics 365. Proficient in Microsoft Office, particularly Excel, Word and Outlook. Strong organisational and administrative skills with excellent attention to detail. Ability to manage multiple priorities in a fast-paced environment. Good communication skills, with the confidence to liaise across different departments. A proactive approach with the ability to work independently and meet deadlines. Apply Now If you have experience in engineering or manufacturing administration and are looking for an opportunity to work within a leading Formula 1 team, Morson would like to hear from you.
Nov 17, 2026
Full time
Quality Control Administrator Location: Oxfordshire Rate: £20.00 per hour Umbrella Contract: Ongoing Hours: Full-time Morson are recruiting on behalf of a leading Formula 1 team based in Oxfordshire for a Quality Control Administrator to provide administrative support to their Quality Control function. This is an excellent opportunity to join a fast-paced motorsport manufacturing environment, supporting inspection activities, maintaining accurate quality records and ensuring components move efficiently through the production process. Key Responsibilities Provide administrative support to the Quality Control and Inspection team. Monitor and manage inspection queues, ensuring components are prioritised in line with production requirements. Liaise with Production, Planning, Manufacturing and Stores to coordinate and expedite urgent requirements. Process inspected components accurately through the business ERP system and release them to the next stage of production. Chase outstanding components and monitor their progress through Quality Control. Track and follow up on Non-Conformance Reports (NCRs), ensuring actions are completed promptly. Maintain accurate quality, inspection and production records, including electronic and hard-copy documentation. Prepare and distribute reports relating to inspection activity and production progress. Work closely with internal departments to resolve delays and maintain production workflow. Skills & Experience Previous experience in an administrative or coordination role within an engineering or manufacturing environment. Engineering background with the ability to read and interpret engineering drawings. Understanding of technical specifications and manufacturing processes. Experience using ERP/MRP systems, ideally Microsoft Dynamics 365. Proficient in Microsoft Office, particularly Excel, Word and Outlook. Strong organisational and administrative skills with excellent attention to detail. Ability to manage multiple priorities in a fast-paced environment. Good communication skills, with the confidence to liaise across different departments. A proactive approach with the ability to work independently and meet deadlines. Apply Now If you have experience in engineering or manufacturing administration and are looking for an opportunity to work within a leading Formula 1 team, Morson would like to hear from you.
ERP Developer Location: Warton, Lancashire (3 days onsite) Duration: 12 Months Rate: £30 - £44.40 per hour, Inside IR35 Hours: 37 hours per week Clearance: BPSS & SC Eligible (ITAR restrictions apply) The Opportunity We are seeking an ERP Developer to join a busy Enterprise Resource Planning team supporting a complex manufacturing and engineering environment click apply for full job details
Nov 17, 2026
Seasonal
ERP Developer Location: Warton, Lancashire (3 days onsite) Duration: 12 Months Rate: £30 - £44.40 per hour, Inside IR35 Hours: 37 hours per week Clearance: BPSS & SC Eligible (ITAR restrictions apply) The Opportunity We are seeking an ERP Developer to join a busy Enterprise Resource Planning team supporting a complex manufacturing and engineering environment click apply for full job details
SYSTEMS ENGINEER QUALIFICATION & CERTIFICATION - CONTRACT 6 MONTHS - READING Fast Jet or Civil Aviation Systems Qualification & Certification proven ability ideally. At Edgewing, we're united by a shared purpose to drive what's next in defence. Uniting UK, Italian, and Japanese expertise to shape the future of global defence, GCAP click apply for full job details
Nov 17, 2026
Seasonal
SYSTEMS ENGINEER QUALIFICATION & CERTIFICATION - CONTRACT 6 MONTHS - READING Fast Jet or Civil Aviation Systems Qualification & Certification proven ability ideally. At Edgewing, we're united by a shared purpose to drive what's next in defence. Uniting UK, Italian, and Japanese expertise to shape the future of global defence, GCAP click apply for full job details
Purpose: On behalf of our client, an established supplier of build-to-print metallic & composite parts, kits, and assemblies to the global aerospace industry, we are looking to recruit a permanent CNC Machinist to work within the CNC Milling team planning and programming using Mazak or Fanuc Control systems on multi axis machines. Responsibilities: Setting & operating CNC machinery as well as programming online and offline Helping to minimise waste Help to ensure that your cell achieves its Quality targets Engage in any relevant training activities Provide input into process improvements Carry out such other duties as may reasonably be required within the jobholder's capability consistent with the Terms and Conditions of employment. Qualifications, skills, attributes, experience required: Minimum 6-12 months experience of working with CNC Experience operating Vertical Machining Centres and working with multi-axis machines within a heavy engineering environment or working with large scale material would be an advantage Knowledge / experience / ability to competently adjust offsets in program or tool setting Competent in the use of inspection equipment and the interpretation of measured values, including using Digital Verniers, Micrometers, Dial Test Indicators etc Ability to read and interpret engineering drawings and associated tolerances and specifications Knowledge / understanding of the importance of traceability with regards to material usage and movement Team playing ability with a good work ethic and a 'can do' attitude Good basic ability in Maths and English.
Nov 16, 2026
Full time
Purpose: On behalf of our client, an established supplier of build-to-print metallic & composite parts, kits, and assemblies to the global aerospace industry, we are looking to recruit a permanent CNC Machinist to work within the CNC Milling team planning and programming using Mazak or Fanuc Control systems on multi axis machines. Responsibilities: Setting & operating CNC machinery as well as programming online and offline Helping to minimise waste Help to ensure that your cell achieves its Quality targets Engage in any relevant training activities Provide input into process improvements Carry out such other duties as may reasonably be required within the jobholder's capability consistent with the Terms and Conditions of employment. Qualifications, skills, attributes, experience required: Minimum 6-12 months experience of working with CNC Experience operating Vertical Machining Centres and working with multi-axis machines within a heavy engineering environment or working with large scale material would be an advantage Knowledge / experience / ability to competently adjust offsets in program or tool setting Competent in the use of inspection equipment and the interpretation of measured values, including using Digital Verniers, Micrometers, Dial Test Indicators etc Ability to read and interpret engineering drawings and associated tolerances and specifications Knowledge / understanding of the importance of traceability with regards to material usage and movement Team playing ability with a good work ethic and a 'can do' attitude Good basic ability in Maths and English.
PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives Suitable candidates MUST hold time served apprenticeship, any candidates without apprenticeship WILL NOT be considered Specific responsibilities include: Certify the product in line with Product Certification procedure Demonstrated ability / willingness to certify own work in line with company quality standards Maintain product certification and approval via regular audits Possess a versatile skill base with the capability to apply these skills across a range of tasks Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack Maintain to the highest level, workmanship standards and product quality Ensure compliance with all associated procedures applicable to the manufacturing process Maintain a safe working environment Maintain a good housekeeping policy Willing to contribute to an environment of process improvement Role requirements (skills, training and qualifications) Essential: Engineering/ craft apprenticeship ESSENTIAL Possess experience in electrical wiring and assembly Electrical fitting experience Desirable: IPC 610 certified/ trained preferred Previous experience in the aerospace or defence industry would be desirable Manual handling training Lifting and slinging (including overhead cranes) training ESD training Further Details: Rates: £28.35 - £29.70 per hour Umbrella or £21.12 - £22.12 per hour PAYE (role is inside IR35) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Duration: Ongoing rolling contract role, with an initial period of 12 months (extension and permanent prospects very strong) Location: MBDA Limited Lea Field Way Bolton BL5 1ED ly days 37 hour working week (Monday - Thursday 8am-5pm then a half day finish on a Friday) potential for ad hoc shift work
Nov 16, 2026
Full time
PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives Suitable candidates MUST hold time served apprenticeship, any candidates without apprenticeship WILL NOT be considered Specific responsibilities include: Certify the product in line with Product Certification procedure Demonstrated ability / willingness to certify own work in line with company quality standards Maintain product certification and approval via regular audits Possess a versatile skill base with the capability to apply these skills across a range of tasks Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack Maintain to the highest level, workmanship standards and product quality Ensure compliance with all associated procedures applicable to the manufacturing process Maintain a safe working environment Maintain a good housekeeping policy Willing to contribute to an environment of process improvement Role requirements (skills, training and qualifications) Essential: Engineering/ craft apprenticeship ESSENTIAL Possess experience in electrical wiring and assembly Electrical fitting experience Desirable: IPC 610 certified/ trained preferred Previous experience in the aerospace or defence industry would be desirable Manual handling training Lifting and slinging (including overhead cranes) training ESD training Further Details: Rates: £28.35 - £29.70 per hour Umbrella or £21.12 - £22.12 per hour PAYE (role is inside IR35) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Duration: Ongoing rolling contract role, with an initial period of 12 months (extension and permanent prospects very strong) Location: MBDA Limited Lea Field Way Bolton BL5 1ED ly days 37 hour working week (Monday - Thursday 8am-5pm then a half day finish on a Friday) potential for ad hoc shift work
PLEASE READ BEFORE APPLYING: Recognising the RESTRICTED nature of the work suitable candidates will be baseline level (BPSS) clearable or eligible for this level of clearance Job Summary: Morson are exclusively recruiting for Skilled Fabricators to work on behalf of our client GKN () based at their site in Filton (BS34 9AU) Suitable candidates must either have a recognised and relevant apprenticeship OR the equivalent NVQ Level 3 standard CERTS MUST BE PROVIDED WITH APPLICATION Rate(s): £20.17 per hour Days (once stamp gained rate rises to £21.00 per hour) 7 Day Fort Day £25.21 per hour (once stamp gained rate rises to £26.25 per hour) All overtime £30.26 per hour (with stamp £31.50 per hour) Trialling a Travel / Accommodation allowance for Fabricators: Over 50 miles away £700 Receipted & subject to Tax and NI Over 75 miles away £800 Receipted & subject to Tax and NI Standard Hours: 35 per week on days / average of 41 hours on 7-day fort day Other working hours information: Days 4 Day Week Hours are 7am to 4.15pm 7 Day Fort Day: week 1 Mon, Tues, Weds, Sat and Sun week 2 Thurs and Fri 7am-6:45pm 11 hrs and 45 mins per day Shift Pattern: Core Days 2 weeks - will move onto 7 Day Fort Day ly 12 months PROFILE The use of hand, electrical and pneumatic tools and bending machines to shape, form and assemble metal products within drawing limits. Desired abilities to include (but not limited to): Use of jigs to assemble parts made from stainless steel, titanium or aluminium Fitting Swaging Measuring machinery and jigs Awareness of recognised quality process, i.e. ISO 9001, AS/EN9100, or similar KEY DELIVERABLES Working with metals that have less than 3-millimetre thickness Ensure parts are produced on a 'right first time' basis Ensure that any calibrated equipment used is within date Responsible for the timely clearance of work phases using the SAP system Responsible for highlighting any non-conformance to the Process Team Leader Adhering to the requirements of the GKNAF Quality Procedures Accountable for Health & Safety requirements under Section 7 of the HASAWA 1974 To hold first party inspection approval (M02 status is subject to obtaining A stamp approval) Responsible for general housekeeping within the area KEY SKILLS A recognised and relevant apprenticeship or the equivalent NVQ Level 3 standard CERTS MUST BE PROVIDED Previously worked with thin plate materials 3mm and under Previous manufacturing experience in a factory environment Ability to understand technical drawings/limits. Must be able to work in small teams with Process Team Leaders Self-motivated team player with good communication skills Knowledge of Lean manufacturing principles and techniques to support GKNAF continuous improvement initiatives would be desirable FURTHER DETAILS: Rate: £20.17 per hour Days (once stamp gained rate rises to £21.00 per hour) 7 Day Fort Day £25.21 per hour (once stamp gained rate rises to £26.25 per hour) All overtime £30.26 per hour (with stamp £31.50 per hour) Trialling a Travel / Accommodation allowance for Fabricators: Over 50 miles away £700 Receipted & subject to Tax and NI Over 75 miles away £800 Receipted & subject to Tax and NI Standard Hours: 35 per week on days / average of 41 hours on 7-day fort day Other working hours information: Days 4 Day Week Hours are 7am to 4.15pm 7 Day Fort Day week 1 Mon, Tues, Weds, Sat and Sun week 2 Thurs and Fri 7am-6:45pm 11 hrs and 45 mins per day Shift Pattern: Core Days 2 weeks - will move onto 7 Day Fort Day ly 12 months Certs must be submitted with CV's and please confirm postcode & if qualifies for an allowance Addresses: GKN Filton Golf Course Lane Filton BS34 9AU Security: Baseline Security Clearance will be via GKN Agenda Screening and includes a DBS Check (Any gaps in employment over 4 weeks need to be qualified and supported with qualifying documentation i.e. job seekers proof, bank statements to show how supported yourself, medical documentation without this candidate will not pass security checks)
Nov 16, 2026
Full time
PLEASE READ BEFORE APPLYING: Recognising the RESTRICTED nature of the work suitable candidates will be baseline level (BPSS) clearable or eligible for this level of clearance Job Summary: Morson are exclusively recruiting for Skilled Fabricators to work on behalf of our client GKN () based at their site in Filton (BS34 9AU) Suitable candidates must either have a recognised and relevant apprenticeship OR the equivalent NVQ Level 3 standard CERTS MUST BE PROVIDED WITH APPLICATION Rate(s): £20.17 per hour Days (once stamp gained rate rises to £21.00 per hour) 7 Day Fort Day £25.21 per hour (once stamp gained rate rises to £26.25 per hour) All overtime £30.26 per hour (with stamp £31.50 per hour) Trialling a Travel / Accommodation allowance for Fabricators: Over 50 miles away £700 Receipted & subject to Tax and NI Over 75 miles away £800 Receipted & subject to Tax and NI Standard Hours: 35 per week on days / average of 41 hours on 7-day fort day Other working hours information: Days 4 Day Week Hours are 7am to 4.15pm 7 Day Fort Day: week 1 Mon, Tues, Weds, Sat and Sun week 2 Thurs and Fri 7am-6:45pm 11 hrs and 45 mins per day Shift Pattern: Core Days 2 weeks - will move onto 7 Day Fort Day ly 12 months PROFILE The use of hand, electrical and pneumatic tools and bending machines to shape, form and assemble metal products within drawing limits. Desired abilities to include (but not limited to): Use of jigs to assemble parts made from stainless steel, titanium or aluminium Fitting Swaging Measuring machinery and jigs Awareness of recognised quality process, i.e. ISO 9001, AS/EN9100, or similar KEY DELIVERABLES Working with metals that have less than 3-millimetre thickness Ensure parts are produced on a 'right first time' basis Ensure that any calibrated equipment used is within date Responsible for the timely clearance of work phases using the SAP system Responsible for highlighting any non-conformance to the Process Team Leader Adhering to the requirements of the GKNAF Quality Procedures Accountable for Health & Safety requirements under Section 7 of the HASAWA 1974 To hold first party inspection approval (M02 status is subject to obtaining A stamp approval) Responsible for general housekeeping within the area KEY SKILLS A recognised and relevant apprenticeship or the equivalent NVQ Level 3 standard CERTS MUST BE PROVIDED Previously worked with thin plate materials 3mm and under Previous manufacturing experience in a factory environment Ability to understand technical drawings/limits. Must be able to work in small teams with Process Team Leaders Self-motivated team player with good communication skills Knowledge of Lean manufacturing principles and techniques to support GKNAF continuous improvement initiatives would be desirable FURTHER DETAILS: Rate: £20.17 per hour Days (once stamp gained rate rises to £21.00 per hour) 7 Day Fort Day £25.21 per hour (once stamp gained rate rises to £26.25 per hour) All overtime £30.26 per hour (with stamp £31.50 per hour) Trialling a Travel / Accommodation allowance for Fabricators: Over 50 miles away £700 Receipted & subject to Tax and NI Over 75 miles away £800 Receipted & subject to Tax and NI Standard Hours: 35 per week on days / average of 41 hours on 7-day fort day Other working hours information: Days 4 Day Week Hours are 7am to 4.15pm 7 Day Fort Day week 1 Mon, Tues, Weds, Sat and Sun week 2 Thurs and Fri 7am-6:45pm 11 hrs and 45 mins per day Shift Pattern: Core Days 2 weeks - will move onto 7 Day Fort Day ly 12 months Certs must be submitted with CV's and please confirm postcode & if qualifies for an allowance Addresses: GKN Filton Golf Course Lane Filton BS34 9AU Security: Baseline Security Clearance will be via GKN Agenda Screening and includes a DBS Check (Any gaps in employment over 4 weeks need to be qualified and supported with qualifying documentation i.e. job seekers proof, bank statements to show how supported yourself, medical documentation without this candidate will not pass security checks)
Trials Technician 12 Month Contract Ridsdale £20.93/hr PAYE 37 hours per week Inside IR35 We are looking for a Trials Technician to support test and trials activity within a specialist defence engineering environment. This is a practical, hands-on role working as part of a small team responsible for setting up, operating and breaking down test arenas and equipment. The role would suit someone with a mechanical background who is confident working safely around equipment, lifting operations, test setups and technical processes. The successful candidate will support trials activity to customer requirements, ensure equipment is maintained and fit for purpose, and provide accurate test data to support reporting. Role Responsibilities • Supporting the setup, operation and breakdown of test arenas and trial equipment. • Ensuring allocated trials and tests are completed safely, accurately and to agreed quality standards. • Maintaining equipment used for test and trials activity. • Using lifting equipment, including forklift trucks where required. • Completing equipment records and supporting accurate documentation. • Providing test data to the Trials Engineer for customer reports. • Supporting continuous improvement of range test facilities and capabilities. • Working in line with SHE requirements, safe systems of work and business procedures. • Carrying out training where required. • Supporting wider site and operational duties as needed. Skills and Experience Required • Experience working in a mechanical environment. • A practical, hands-on approach to equipment, tools, testing or maintenance. • Good awareness of safety procedures and safe working practices. • Ability to follow processes and complete accurate records. • Confidence working in a small team within an operational environment. • A flexible, can-do attitude and the ability to adapt when priorities change. • Good communication skills and the ability to work with engineers, operations and site teams. The following would be useful but not essential: • Forklift truck licence or experience using lifting equipment. • Experience in trials, test environments, range work or proving ground activity. • Defence, MOD, munitions, military, aerospace, heavy engineering or mechanical test experience. • Knowledge of ISO 45001, ISO 14001 or ISO 50001. • IOSH or similar safety qualification. • SAP, Microsoft Office or Teamcenter experience Additional Information Due to the nature of the work, candidates will need to be able to obtain the relevant background checks and security clearance if required.
Nov 16, 2026
Full time
Trials Technician 12 Month Contract Ridsdale £20.93/hr PAYE 37 hours per week Inside IR35 We are looking for a Trials Technician to support test and trials activity within a specialist defence engineering environment. This is a practical, hands-on role working as part of a small team responsible for setting up, operating and breaking down test arenas and equipment. The role would suit someone with a mechanical background who is confident working safely around equipment, lifting operations, test setups and technical processes. The successful candidate will support trials activity to customer requirements, ensure equipment is maintained and fit for purpose, and provide accurate test data to support reporting. Role Responsibilities • Supporting the setup, operation and breakdown of test arenas and trial equipment. • Ensuring allocated trials and tests are completed safely, accurately and to agreed quality standards. • Maintaining equipment used for test and trials activity. • Using lifting equipment, including forklift trucks where required. • Completing equipment records and supporting accurate documentation. • Providing test data to the Trials Engineer for customer reports. • Supporting continuous improvement of range test facilities and capabilities. • Working in line with SHE requirements, safe systems of work and business procedures. • Carrying out training where required. • Supporting wider site and operational duties as needed. Skills and Experience Required • Experience working in a mechanical environment. • A practical, hands-on approach to equipment, tools, testing or maintenance. • Good awareness of safety procedures and safe working practices. • Ability to follow processes and complete accurate records. • Confidence working in a small team within an operational environment. • A flexible, can-do attitude and the ability to adapt when priorities change. • Good communication skills and the ability to work with engineers, operations and site teams. The following would be useful but not essential: • Forklift truck licence or experience using lifting equipment. • Experience in trials, test environments, range work or proving ground activity. • Defence, MOD, munitions, military, aerospace, heavy engineering or mechanical test experience. • Knowledge of ISO 45001, ISO 14001 or ISO 50001. • IOSH or similar safety qualification. • SAP, Microsoft Office or Teamcenter experience Additional Information Due to the nature of the work, candidates will need to be able to obtain the relevant background checks and security clearance if required.
LEVEL 2 QUALIFICATIONS ACCEPTABLE (previously level 3 only) Morson are recruiting CNC Machinists, initially on a 6-month contract with GKN Aerospace at the advanced composite manufacturing facility at Western Approach. The site produces carbon fibre wing spars for major aircraft platforms including the A350 and A400M click apply for full job details
Nov 16, 2026
Seasonal
LEVEL 2 QUALIFICATIONS ACCEPTABLE (previously level 3 only) Morson are recruiting CNC Machinists, initially on a 6-month contract with GKN Aerospace at the advanced composite manufacturing facility at Western Approach. The site produces carbon fibre wing spars for major aircraft platforms including the A350 and A400M click apply for full job details
Morson is collaborating with Europe's leading aerospace manufacturer, who are seeking a Quality Inspector to join their team at the Portsmouth site. Job Description Ensure compliance with production and test operations within the Cleanroom, adhering to Plans, Processes, and Procedures for Space Equipment manufacturing, in line with approved quality standards, particularly ECSS-Q-ST-70-08, 28, 38, or ECSS-Q-ST-70-61. Accountable for validating the correct "as built as designed" configuration. Responsible for environmental and Health & Safety control of assembly, integration, and test activities, ensuring compliance with relevant standards. Provide support for Key Inspection Points (KIPs) during physical inspections, where required. Responsibilities Promote a quality-first mindset throughout production operations to prevent non-conformities within the cleanroom environment. Monitor and uphold world-class workmanship standards and cleanroom practises and processes. Conduct design and integrity verification inspections on flight hardware and test setups, following D&S inspection criteria alongside ECSS-Q-ST-70-08, 28, 38, or ECSS-Q-ST-70-61, ensuring compliance with design and quality standards. Identify and document non-conformities, collaborating with Manufacturing Engineering, PA, M&P, and Process Owners to investigate issues. Support root cause analysis of quality incidents with the Project Quality team to prevent recurrence. Perform internal audits of cleanroom activities as directed by the Equipment Quality group. Complete Quality Verification Plan (QVP) verifications as assigned by the Equipment Quality Assurance team. Carry out Key Inspection Points (KIPs) during physical inspections. Assist with specific operational tasks including critical moves, Ready for Test processes, and flight packing. Champion Health and Safety and 5S culture within the cleanroom; monitor operators and visitors to ensure compliance with policies. Ensure the cleanroom work environment complies with Health & Safety policies and that risks are effectively managed. Conduct documentation reviews, oversee paperwork completion, and approve reworks as necessary. Manage and maintain control over quarantined equipment. If you are interested in this role, please submit an up-to-date CV.
Nov 16, 2026
Full time
Morson is collaborating with Europe's leading aerospace manufacturer, who are seeking a Quality Inspector to join their team at the Portsmouth site. Job Description Ensure compliance with production and test operations within the Cleanroom, adhering to Plans, Processes, and Procedures for Space Equipment manufacturing, in line with approved quality standards, particularly ECSS-Q-ST-70-08, 28, 38, or ECSS-Q-ST-70-61. Accountable for validating the correct "as built as designed" configuration. Responsible for environmental and Health & Safety control of assembly, integration, and test activities, ensuring compliance with relevant standards. Provide support for Key Inspection Points (KIPs) during physical inspections, where required. Responsibilities Promote a quality-first mindset throughout production operations to prevent non-conformities within the cleanroom environment. Monitor and uphold world-class workmanship standards and cleanroom practises and processes. Conduct design and integrity verification inspections on flight hardware and test setups, following D&S inspection criteria alongside ECSS-Q-ST-70-08, 28, 38, or ECSS-Q-ST-70-61, ensuring compliance with design and quality standards. Identify and document non-conformities, collaborating with Manufacturing Engineering, PA, M&P, and Process Owners to investigate issues. Support root cause analysis of quality incidents with the Project Quality team to prevent recurrence. Perform internal audits of cleanroom activities as directed by the Equipment Quality group. Complete Quality Verification Plan (QVP) verifications as assigned by the Equipment Quality Assurance team. Carry out Key Inspection Points (KIPs) during physical inspections. Assist with specific operational tasks including critical moves, Ready for Test processes, and flight packing. Champion Health and Safety and 5S culture within the cleanroom; monitor operators and visitors to ensure compliance with policies. Ensure the cleanroom work environment complies with Health & Safety policies and that risks are effectively managed. Conduct documentation reviews, oversee paperwork completion, and approve reworks as necessary. Manage and maintain control over quarantined equipment. If you are interested in this role, please submit an up-to-date CV.
Ready to put your trade skills to work on some of the UK's biggest engineering projects? Morson is recruiting experienced Sheet Metal Workers on behalf of a prestigious client in Barrow in Furness. If you're time-served, skilled in fabrication and HVAC work, overtime opportunities and long-term work, we'd love to hear from you click apply for full job details
Nov 16, 2026
Seasonal
Ready to put your trade skills to work on some of the UK's biggest engineering projects? Morson is recruiting experienced Sheet Metal Workers on behalf of a prestigious client in Barrow in Furness. If you're time-served, skilled in fabrication and HVAC work, overtime opportunities and long-term work, we'd love to hear from you click apply for full job details
Aircraft Armament Supervisor - Typhoon £315 per Day 6-Month Rolling Contract 48 Hours per Week Fast jet experience. Specialist weapons maintenance. A supervisory position supporting the Eurofighter Typhoon. Morson Edge is looking for an experienced Aircraft Armament Supervisor to support Typhoon maintenance operations in Saudi Arabia click apply for full job details
Nov 16, 2026
Seasonal
Aircraft Armament Supervisor - Typhoon £315 per Day 6-Month Rolling Contract 48 Hours per Week Fast jet experience. Specialist weapons maintenance. A supervisory position supporting the Eurofighter Typhoon. Morson Edge is looking for an experienced Aircraft Armament Supervisor to support Typhoon maintenance operations in Saudi Arabia click apply for full job details
Location: Birmingham or Bristol Hybrid / Remote working Morson Group is delighted to be supporting an established and growing multidisciplinary consultancy with the appointment of an Associate / Director / Technical Director - Landscape Planning . This is an exciting opportunity for an experienced Chartered Landscape Architect to take on a senior position within a growing landscape planning team click apply for full job details
Nov 16, 2026
Full time
Location: Birmingham or Bristol Hybrid / Remote working Morson Group is delighted to be supporting an established and growing multidisciplinary consultancy with the appointment of an Associate / Director / Technical Director - Landscape Planning . This is an exciting opportunity for an experienced Chartered Landscape Architect to take on a senior position within a growing landscape planning team click apply for full job details
Location: Based at the Junction 21, M5 Warehouse Facility in Weston-super-Mare, the position also requires travel to the construction site in Bridgwater, supplier locations, and other warehouse facilities during normal working hours. Duration: Approved until 31dec27 (renewable) Status: Contract - INSIDE IR35 Morson Edge are working with a major player in the Energy Sector who have current (contra click apply for full job details
Nov 16, 2026
Seasonal
Location: Based at the Junction 21, M5 Warehouse Facility in Weston-super-Mare, the position also requires travel to the construction site in Bridgwater, supplier locations, and other warehouse facilities during normal working hours. Duration: Approved until 31dec27 (renewable) Status: Contract - INSIDE IR35 Morson Edge are working with a major player in the Energy Sector who have current (contra click apply for full job details
Job Title: Rail Modifications Contractor Location: Primarily Allerton Depot, with travel to other depot locations as required Contract Duration: Initial 6 months, with strong potential for extension Rate: £30.67 per hour (Umbrella) Working Pattern: Days only - Monday to Thursday or Tuesday to Friday (shift pattern confirmed the preceding week) The Opportunity We are currently seeking an experienc click apply for full job details
Nov 16, 2026
Seasonal
Job Title: Rail Modifications Contractor Location: Primarily Allerton Depot, with travel to other depot locations as required Contract Duration: Initial 6 months, with strong potential for extension Rate: £30.67 per hour (Umbrella) Working Pattern: Days only - Monday to Thursday or Tuesday to Friday (shift pattern confirmed the preceding week) The Opportunity We are currently seeking an experienc click apply for full job details
We're working with a multidisciplinary, employee-owned consultancy to recruit a Senior or Associate Landscape Architect. You'll join a collaborative team working across planning, urban design and landscape architecture on a diverse portfolio of projects throughout the UK. This is a fast-paced studio environment suited to professionals with strong design and delivery experience, ideally in the UK click apply for full job details
Nov 16, 2026
Full time
We're working with a multidisciplinary, employee-owned consultancy to recruit a Senior or Associate Landscape Architect. You'll join a collaborative team working across planning, urban design and landscape architecture on a diverse portfolio of projects throughout the UK. This is a fast-paced studio environment suited to professionals with strong design and delivery experience, ideally in the UK click apply for full job details
Job: Caulker Location: Barrow-In-Furness (Cumbria), United Kingdom Salary & Shifts: Range of payrates based on shift patterns, full breakdown below Contract length: 12 months (extensions available) Contracted hours: 37 hours (overtime available) Rate card: Available on request Morson are partnered up with a prestigious defence client (leader in the Defence and Security sector) in search for skilled Ca click apply for full job details
Nov 16, 2026
Contractor
Job: Caulker Location: Barrow-In-Furness (Cumbria), United Kingdom Salary & Shifts: Range of payrates based on shift patterns, full breakdown below Contract length: 12 months (extensions available) Contracted hours: 37 hours (overtime available) Rate card: Available on request Morson are partnered up with a prestigious defence client (leader in the Defence and Security sector) in search for skilled Ca click apply for full job details
Location: Norwich, Norfolk We're looking for an experienced LGV Driver to join our Readymix team in Norfolk. As an LGV Driver, you'll be responsible for safely delivering ready-mix concrete to residential and commercial sites across the area. You'll be an important part of our team, helping to make sure deliveries arrive safely and on time click apply for full job details
Nov 16, 2026
Contractor
Location: Norwich, Norfolk We're looking for an experienced LGV Driver to join our Readymix team in Norfolk. As an LGV Driver, you'll be responsible for safely delivering ready-mix concrete to residential and commercial sites across the area. You'll be an important part of our team, helping to make sure deliveries arrive safely and on time click apply for full job details
Landscape Architect planner role to be based out of a busy Bristol office. Occasional travel may be required for specific project needs such as meetings or site visits. The Group is one of the UK's leading independent environmental consultancies, underpinned by a growing team of experts in environmental policy, strategy, design, and assessment click apply for full job details
Nov 16, 2026
Full time
Landscape Architect planner role to be based out of a busy Bristol office. Occasional travel may be required for specific project needs such as meetings or site visits. The Group is one of the UK's leading independent environmental consultancies, underpinned by a growing team of experts in environmental policy, strategy, design, and assessment click apply for full job details