Static Mechanical Engineer Working hours: Monday-Friday, 8am-5pm About Us: As one of London's leading M&E contractors we have several large contracts across multiple prestigious sites in the capital and now require an engineer with an electrical bias to join our team. From reactive repairs to planned maintenance, we pride ourselves on reliability, professionalism, and customer satisfaction. You could be working as part of a team or alone to carry out inspection & testing, remedial works, PPM/RM and installation works as required. Key Responsibilities: Carrying out planned preventative maintenance, reactive maintenance and fault finding on all mechanical and electrical plant Ensuring all works are carried out in compliance with health & safety standards and company procedures Communicating with clients and site teams professionally and clearly Keeping detailed job records using our bespoke software Key technical knowledge required: HIUs (Heat Interface Units) We service, diagnose faults, and carry out repairs. No previous experience is necessary, but strong mechanical diagnosis skills are needed UFH (Underfloor heating) manifolds Ability to diagnose faults and carry out repairs FCUs Strong understanding to investigate faults with FCUs, chilled water circuits, and related controls Controls BMS systems, actuators, local controllers, etc. Mechanical plant Pumps, boilers, LTHW systems, chillers, Pressurisation Units, etc. What We Offer: Up to £45k Salary based on experience Travel expenses Company phone Recommend-a-Friend bonus: £450 for every candidate you recommend once probation ends Tools and uniform provided Overtime opportunities 20 days of holiday allowance + Bank holidays All offers are subject to pre-employment checks and a DBS check. If you have not heard from us within 30 days please assume that you have not been successful on this occasion. However, we encourage you to apply for future opportunities that match your experience and interests.
Jul 03, 2025
Full time
Static Mechanical Engineer Working hours: Monday-Friday, 8am-5pm About Us: As one of London's leading M&E contractors we have several large contracts across multiple prestigious sites in the capital and now require an engineer with an electrical bias to join our team. From reactive repairs to planned maintenance, we pride ourselves on reliability, professionalism, and customer satisfaction. You could be working as part of a team or alone to carry out inspection & testing, remedial works, PPM/RM and installation works as required. Key Responsibilities: Carrying out planned preventative maintenance, reactive maintenance and fault finding on all mechanical and electrical plant Ensuring all works are carried out in compliance with health & safety standards and company procedures Communicating with clients and site teams professionally and clearly Keeping detailed job records using our bespoke software Key technical knowledge required: HIUs (Heat Interface Units) We service, diagnose faults, and carry out repairs. No previous experience is necessary, but strong mechanical diagnosis skills are needed UFH (Underfloor heating) manifolds Ability to diagnose faults and carry out repairs FCUs Strong understanding to investigate faults with FCUs, chilled water circuits, and related controls Controls BMS systems, actuators, local controllers, etc. Mechanical plant Pumps, boilers, LTHW systems, chillers, Pressurisation Units, etc. What We Offer: Up to £45k Salary based on experience Travel expenses Company phone Recommend-a-Friend bonus: £450 for every candidate you recommend once probation ends Tools and uniform provided Overtime opportunities 20 days of holiday allowance + Bank holidays All offers are subject to pre-employment checks and a DBS check. If you have not heard from us within 30 days please assume that you have not been successful on this occasion. However, we encourage you to apply for future opportunities that match your experience and interests.
Polyteck Building Services Ltd
Tower Hamlets, London
Mobile Maintenance Engineer (Electrical Bias) Working hours: Monday-Friday, 8am-5pm About Us: As one of London's leading M&E contractors we have several large contracts across multiple prestigious sites in the capital and now require an engineer with an electrical bias to join our team. From reactive repairs to planned maintenance, we pride ourselves on reliability, professionalism, and customer satisfaction. You could be working as part of a team or alone to carry out inspection & testing, remedial works, PPM/RM and installation works as required. Key Responsibilities: Carrying out planned preventative maintenance, reactive maintenance and fault finding on all mechanical and electrical plant Systematic and logical sequence of works Working across various mobile sites including offices, residential blocks, and commercial buildings Ensuring all works are carried out in compliance with health & safety standards and company procedures Communicating with clients and site teams professionally and clearly Keeping detailed job records using our bespoke software Requirements: Possession of a valid driving licence. 18th edition wiring regulations. 2391 Inspection & Testing qualifications. Previous experience in a similar role, preferably within the FM sector. An ECS card is desirable. What We Offer: Competitive salary based on experience Company van + fuel card Travel expenses Pension scheme Recommend-a-Friend bonus: £450 for every candiate you recommend once probation ends Phone, Laptop and/or Tablet Tools and uniform provided Overtime opportunities 20 days of holiday allowance + Bank holidays All offers are subject to pre-employment checks and a DBS check. Must have the legal right to work in the UK. If you have not heard from us within 30 days please assume that you have not been successful on this occasion. However, we encourage you to apply for future opportunities that match your experience and interests.
Jul 01, 2025
Full time
Mobile Maintenance Engineer (Electrical Bias) Working hours: Monday-Friday, 8am-5pm About Us: As one of London's leading M&E contractors we have several large contracts across multiple prestigious sites in the capital and now require an engineer with an electrical bias to join our team. From reactive repairs to planned maintenance, we pride ourselves on reliability, professionalism, and customer satisfaction. You could be working as part of a team or alone to carry out inspection & testing, remedial works, PPM/RM and installation works as required. Key Responsibilities: Carrying out planned preventative maintenance, reactive maintenance and fault finding on all mechanical and electrical plant Systematic and logical sequence of works Working across various mobile sites including offices, residential blocks, and commercial buildings Ensuring all works are carried out in compliance with health & safety standards and company procedures Communicating with clients and site teams professionally and clearly Keeping detailed job records using our bespoke software Requirements: Possession of a valid driving licence. 18th edition wiring regulations. 2391 Inspection & Testing qualifications. Previous experience in a similar role, preferably within the FM sector. An ECS card is desirable. What We Offer: Competitive salary based on experience Company van + fuel card Travel expenses Pension scheme Recommend-a-Friend bonus: £450 for every candiate you recommend once probation ends Phone, Laptop and/or Tablet Tools and uniform provided Overtime opportunities 20 days of holiday allowance + Bank holidays All offers are subject to pre-employment checks and a DBS check. Must have the legal right to work in the UK. If you have not heard from us within 30 days please assume that you have not been successful on this occasion. However, we encourage you to apply for future opportunities that match your experience and interests.
Polyteck Building Services Ltd
Tower Hamlets, London
Pump Specialist Engineer Working hours: Monday-Friday, 8am-5pm About Us As one of London's leading M&E contractors we have several large contracts across multiple prestigious sites in the capital. We re now looking to expand our expert team with a Pump Specialist Engineer to support our growing portfolio of clients. From reactive repairs to planned maintenance, we pride ourselves on reliability, professionalism, and customer satisfaction. You could be working as part of a team or alone to carry out inspection & testing, remedial works, PPM/RM and installation works as required. Role Overview: The ideal candidate will have a strong background in pump maintenance, commercial building services, and a good all-round understanding of both electrical and mechanical systems. This is a mobile role with a focus on PPM and reactive maintenance of pumps and related systems. Key Responsibilities: Planned Preventive Maintenance (PPM) and reactive servicing of pumps and related plant M&E maintenance Diagnose faults and carry out repairs on cold-water booster sets, pressurisation units, inverters, and expansion vessels Installations of booster sets and pressurisation units Maintain accurate records and complete service reports Ensure safe working practices in accordance with health and safety standards Requirements: Extensive experience working in commercial environments Proven experience in pump maintenance and installation Knowledge of cold-water booster sets and pressurisation units (various makes/models) Understanding of inverters and parameter settings Ability to set expansion vessel pressures accurately for system requirements Building services knowledge, ideally with mechanical or HVAC qualifications (not essential) Confined Spaces certification (desirable) Full UK Driver s Licence (essential) What We Offer: Basic salary up to £50,000 (depending on experience) 23 days holiday + Bank Holidays Pension scheme Annual salary review Recommend-a-Friend bonus: £450 for every candiate you recommend once probation ends Company phone and/or tablet Company vehicle & fuel card Full company uniform and PPE Paid overtime after 40 hours: 1.5x Normal Rate 2x for Overnight and Bank Holidays All offers are subject to pre-employment checks and a DBS check. Must have the legal right to work in the UK. If you have not heard from us within 30 days please assume that you have not been successful on this occasion. However, we encourage you to apply for future opportunities that match your experience and interests.
Jul 01, 2025
Full time
Pump Specialist Engineer Working hours: Monday-Friday, 8am-5pm About Us As one of London's leading M&E contractors we have several large contracts across multiple prestigious sites in the capital. We re now looking to expand our expert team with a Pump Specialist Engineer to support our growing portfolio of clients. From reactive repairs to planned maintenance, we pride ourselves on reliability, professionalism, and customer satisfaction. You could be working as part of a team or alone to carry out inspection & testing, remedial works, PPM/RM and installation works as required. Role Overview: The ideal candidate will have a strong background in pump maintenance, commercial building services, and a good all-round understanding of both electrical and mechanical systems. This is a mobile role with a focus on PPM and reactive maintenance of pumps and related systems. Key Responsibilities: Planned Preventive Maintenance (PPM) and reactive servicing of pumps and related plant M&E maintenance Diagnose faults and carry out repairs on cold-water booster sets, pressurisation units, inverters, and expansion vessels Installations of booster sets and pressurisation units Maintain accurate records and complete service reports Ensure safe working practices in accordance with health and safety standards Requirements: Extensive experience working in commercial environments Proven experience in pump maintenance and installation Knowledge of cold-water booster sets and pressurisation units (various makes/models) Understanding of inverters and parameter settings Ability to set expansion vessel pressures accurately for system requirements Building services knowledge, ideally with mechanical or HVAC qualifications (not essential) Confined Spaces certification (desirable) Full UK Driver s Licence (essential) What We Offer: Basic salary up to £50,000 (depending on experience) 23 days holiday + Bank Holidays Pension scheme Annual salary review Recommend-a-Friend bonus: £450 for every candiate you recommend once probation ends Company phone and/or tablet Company vehicle & fuel card Full company uniform and PPE Paid overtime after 40 hours: 1.5x Normal Rate 2x for Overnight and Bank Holidays All offers are subject to pre-employment checks and a DBS check. Must have the legal right to work in the UK. If you have not heard from us within 30 days please assume that you have not been successful on this occasion. However, we encourage you to apply for future opportunities that match your experience and interests.
