Electronics Technician Location: Staplehurst, TN12 0DS Salary: £26K per annum, DOE Hours: 40hrs, Monday - Friday Contract: Full time, Permanent Benefits: Enhanced pension contributions, Quarterly staff bonus scheme, Company sick pay scheme, Employee referral scheme, Death in service cover, Competitive holidays, Cycle to work scheme, On-site parking plus excellent training and development We are Magnetic Shields Limited (MSL), a family run company who are the industry leader in the design and manufacture of magnetically shielded products and rooms. Our brand-new factory unit and Fibre laser with full stock automation has doubled our production capacity and throughput. Our continued period of expansion is a very exciting time for the company and we are looking to speak to applicants who are interested in joining our R&D team as an Electronics Technician! This position will involve working with Physicists and Engineers on the practical build of repeating products to meet customer expectation within tight timescales, as well as thorough documentation of new and existing build procedures. The equipment build will possess electrical and electronic content together with supporting mechanical content. The team is responsible for the experimental setup realisation and measurement of magnetic fields across a range of frequencies from DC (0 Hz) to VLF (3-30 kHz), for both research and technical support purposes. The position will also involve the construction and operation of compensation coil systems for nullifying magnetic fields and systems for the degaussing of large enclosures. The candidate will be required to perform test set ups plus the operations both in-house and externally, whilst documenting procedures and results. This is an exciting role within a progressive department, with plenty of potential for training and development! Essential Skills: An HNC in electronic engineering 1-2 years practical, transferable experience Electronic and mechanical assembly/testing experience Understanding of basic fault finding and demonstration of logical method Basic programming skills for equipment automation Soldering, crimping and calibration experience Electronic component recognition and understanding operation Technical documentation skills with keen eye for detail Strong analytical, alongside good computer skills & data presentation Reliable, motivated with ability to demonstrate logical and reasoned approach to problem solving Good communication skills It would be great if you had: Understanding of the generation and testing of DC & AC magnetic fields Experience of MCAD and ECAD drawings We acknowledge that the most valuable aspect of business, is the people, and we are looking to recruit the next generation of our workforce! We will invest everything we have in your success, is it time for you to join our team and start your journey Click on "APPLY" today! No agencies please.
Mar 28, 2024
Full time
Electronics Technician Location: Staplehurst, TN12 0DS Salary: £26K per annum, DOE Hours: 40hrs, Monday - Friday Contract: Full time, Permanent Benefits: Enhanced pension contributions, Quarterly staff bonus scheme, Company sick pay scheme, Employee referral scheme, Death in service cover, Competitive holidays, Cycle to work scheme, On-site parking plus excellent training and development We are Magnetic Shields Limited (MSL), a family run company who are the industry leader in the design and manufacture of magnetically shielded products and rooms. Our brand-new factory unit and Fibre laser with full stock automation has doubled our production capacity and throughput. Our continued period of expansion is a very exciting time for the company and we are looking to speak to applicants who are interested in joining our R&D team as an Electronics Technician! This position will involve working with Physicists and Engineers on the practical build of repeating products to meet customer expectation within tight timescales, as well as thorough documentation of new and existing build procedures. The equipment build will possess electrical and electronic content together with supporting mechanical content. The team is responsible for the experimental setup realisation and measurement of magnetic fields across a range of frequencies from DC (0 Hz) to VLF (3-30 kHz), for both research and technical support purposes. The position will also involve the construction and operation of compensation coil systems for nullifying magnetic fields and systems for the degaussing of large enclosures. The candidate will be required to perform test set ups plus the operations both in-house and externally, whilst documenting procedures and results. This is an exciting role within a progressive department, with plenty of potential for training and development! Essential Skills: An HNC in electronic engineering 1-2 years practical, transferable experience Electronic and mechanical assembly/testing experience Understanding of basic fault finding and demonstration of logical method Basic programming skills for equipment automation Soldering, crimping and calibration experience Electronic component recognition and understanding operation Technical documentation skills with keen eye for detail Strong analytical, alongside good computer skills & data presentation Reliable, motivated with ability to demonstrate logical and reasoned approach to problem solving Good communication skills It would be great if you had: Understanding of the generation and testing of DC & AC magnetic fields Experience of MCAD and ECAD drawings We acknowledge that the most valuable aspect of business, is the people, and we are looking to recruit the next generation of our workforce! We will invest everything we have in your success, is it time for you to join our team and start your journey Click on "APPLY" today! No agencies please.
Site Director, Transit Electronics page is loaded Site Director, Transit Electronics Apply locations London, ON time type Full time posted on Posted Yesterday job requisition id R Wabtec Corporation is a leading global provider of equipment, systems, digital solutions and value-added services for freight and transit rail. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation and Faiveley Transport, the company has unmatched digital expertise, technological innovation, and world-class manufacturing and services, enabling the digital-rail-and-transit ecosystems. Wabtec is focused on performance that drives progress, creating transportation solutions that move and improve the world. Wabtec has approximately 27,000 employees in facilities throughout the world. Visit the company's new website at: . It's not just about your career or your job title it's about who you are and the impact you are going to make on the world. Do you want to go into uncharted waters do things that haven't been done to make yours and someone else's life better? Wabtec has been doing that for decades and we will continue to do so! Through our people, leadership development, services, technology and scale, Wabtec delivers better outcomes for global customers by speaking the language of industry. Who will you be working with? Wabtec's Bach-Simpson division is the lead Event Recorder OEM in the North American Transit market. It designs, develops, and maintains an array of electronic systems and Automated Test Equipment for passenger and freight rail markets. How will you make a difference? As a member of Bach-Simpson and Wabtec's Core Electronics Group, you will be responsible for the management and coordination of a management team of 6 that includes Product Line, Engineering, Production and Quality Managers to handle all aspects of the product life cycle. This position utilizes technical, organization and communication skills to define operational framework and ensure compliance with it. Coordinates overall site operational management activities and interfaces with all necessary other functional areas to ensure successful operation and growth of the business. What do we want to know about you? Basic Qualifications: Degree/Diploma in Engineering and business administration. Minimum of 12 years' experience in an Engineering, Product Management, or similar management role. Strong understanding and knowledge of core electronics products including Event Recorders, Speed Indicators, controllers and Automated Test Equipment. Proven experience interfacing with customers in a business development role. Experience in generating budgets, forecasts and strategic plans, as well as developing product roadmaps. Strong leadership, analytical and problem-solving skills. Communicates in a clear and concise manner and effectively evaluates information / data to make decisions, anticipates obstacles and develops plans to resolve, creates actionable strategies and operational plans. Excellent influencing, interpersonal and communications skills (both written and verbal) with all levels of an organization. What will your typical day look like? Manage day-to-day execution of a $10M plus business portfolio that employs 55 employees to meet objectives. Define overall product life cycle for Event Recorder OEM. Outline multi-generational product strategy aligned to deliver overall growth of the portfolio. Define roles and responsibilities between key organizational interfaces including. Engineering, Operations, Program Management, Services, Finance, Customer Service and others as necessary. Define product roadmaps and make prioritization decisions among competing developments with limited resources. Serve as product focal point for business development activities including pricing, proposal preparation, sales interfaces, customer interaction and marketing initiatives. Support execution team with resolution of roadblocks and interdependencies. Partner with technical and functional teams external to the project to ensure their tasks are completed as required. Provide regular portfolio status updates to leadership. Lead the strategic planning effort for assigned products. Define and drive adoption of necessary software tools to support business operations. Ensure necessary resources are engaged to drive closure of any product quality issues. Coach team members and provide feedback on their performance and improvement opportunities. Drive improvement initiatives and incorporate latest industry trends. Monitor monthly financial performance of assigned products and drive necessary actions to achieve both top line and bottom-line goals. Develop customer specific strategies, along with sales, to capture incremental business. Generate new product ideas to expand the product portfolio and drive growth. Eligibility Requirements: Must be willing to travel to customer site as required (10-20% of time). Able to travel to the USA or abroad for business trips. Wabtec offers a comprehensive benefits plan including vacation, health, dental, and retirement. Relocation assistance may be provided if eligibility requirements are met. Wabtec will only employ those who are legally authorized to work in Canada for this opening. Any offer of employment is conditioned upon the successful completion of a background check. Wabtec Corporation is committed to taking on the world's toughest challenges. In order to fulfill that commitment we rely on a culture of leadership, diversity and inclusiveness. We aim to employ the world's brightest minds to help us create a limitless source of ideas and opportunities. We believe in hiring talented people of varied backgrounds, experiences and styles people like you! Wabtec Corporation is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or expression, or protected Veteran status. If you have a disability or special need that requires accommodation, please let us know. About Us Want to move the world? Want to innovate and bring that innovation to life? At Wabtec, we are in the business of realizing potential - that of the transportation industry, and yours! Drawing on nearly four centuries of collective success across the vibrant portfolios of Wabtec, GE Transportation and Faiveley Transport, we offer employees hands-on opportunities all over the world to shape the future of transportation - as well as their own. Wabtec is focused on performance that drives progress, leveraging our digital expertise, technological innovation, and world-class manufacturing and services to create transportation solutions that move and improve the world. Along with our industry-leading portfolio of products and solutions for the rail and transit industries, Wabtec is a leader in mining, marine, and industrial solutions. Wabtec celebrates thinkers and doers. Our values included in the About Us page are rooted in innovation, collaboration, inclusiveness, and continuous improvement to solve our customers' toughest challenges. Whether your talents lie in digital solution development, next-gen manufacturing, advanced service delivery, or the spectrum of business functions that support them, Wabtec literally has a world of opportunity for you across our global network. Our employees are the architects of the future. Where will you be tomorrow?
Mar 28, 2024
Full time
Site Director, Transit Electronics page is loaded Site Director, Transit Electronics Apply locations London, ON time type Full time posted on Posted Yesterday job requisition id R Wabtec Corporation is a leading global provider of equipment, systems, digital solutions and value-added services for freight and transit rail. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation and Faiveley Transport, the company has unmatched digital expertise, technological innovation, and world-class manufacturing and services, enabling the digital-rail-and-transit ecosystems. Wabtec is focused on performance that drives progress, creating transportation solutions that move and improve the world. Wabtec has approximately 27,000 employees in facilities throughout the world. Visit the company's new website at: . It's not just about your career or your job title it's about who you are and the impact you are going to make on the world. Do you want to go into uncharted waters do things that haven't been done to make yours and someone else's life better? Wabtec has been doing that for decades and we will continue to do so! Through our people, leadership development, services, technology and scale, Wabtec delivers better outcomes for global customers by speaking the language of industry. Who will you be working with? Wabtec's Bach-Simpson division is the lead Event Recorder OEM in the North American Transit market. It designs, develops, and maintains an array of electronic systems and Automated Test Equipment for passenger and freight rail markets. How will you make a difference? As a member of Bach-Simpson and Wabtec's Core Electronics Group, you will be responsible for the management and coordination of a management team of 6 that includes Product Line, Engineering, Production and Quality Managers to handle all aspects of the product life cycle. This position utilizes technical, organization and communication skills to define operational framework and ensure compliance with it. Coordinates overall site operational management activities and interfaces with all necessary other functional areas to ensure successful operation and growth of the business. What do we want to know about you? Basic Qualifications: Degree/Diploma in Engineering and business administration. Minimum of 12 years' experience in an Engineering, Product Management, or similar management role. Strong understanding and knowledge of core electronics products including Event Recorders, Speed Indicators, controllers and Automated Test Equipment. Proven experience interfacing with customers in a business development role. Experience in generating budgets, forecasts and strategic plans, as well as developing product roadmaps. Strong leadership, analytical and problem-solving skills. Communicates in a clear and concise manner and effectively evaluates information / data to make decisions, anticipates obstacles and develops plans to resolve, creates actionable strategies and operational plans. Excellent influencing, interpersonal and communications skills (both written and verbal) with all levels of an organization. What will your typical day look like? Manage day-to-day execution of a $10M plus business portfolio that employs 55 employees to meet objectives. Define overall product life cycle for Event Recorder OEM. Outline multi-generational product strategy aligned to deliver overall growth of the portfolio. Define roles and responsibilities between key organizational interfaces including. Engineering, Operations, Program Management, Services, Finance, Customer Service and others as necessary. Define product roadmaps and make prioritization decisions among competing developments with limited resources. Serve as product focal point for business development activities including pricing, proposal preparation, sales interfaces, customer interaction and marketing initiatives. Support execution team with resolution of roadblocks and interdependencies. Partner with technical and functional teams external to the project to ensure their tasks are completed as required. Provide regular portfolio status updates to leadership. Lead the strategic planning effort for assigned products. Define and drive adoption of necessary software tools to support business operations. Ensure necessary resources are engaged to drive closure of any product quality issues. Coach team members and provide feedback on their performance and improvement opportunities. Drive improvement initiatives and incorporate latest industry trends. Monitor monthly financial performance of assigned products and drive necessary actions to achieve both top line and bottom-line goals. Develop customer specific strategies, along with sales, to capture incremental business. Generate new product ideas to expand the product portfolio and drive growth. Eligibility Requirements: Must be willing to travel to customer site as required (10-20% of time). Able to travel to the USA or abroad for business trips. Wabtec offers a comprehensive benefits plan including vacation, health, dental, and retirement. Relocation assistance may be provided if eligibility requirements are met. Wabtec will only employ those who are legally authorized to work in Canada for this opening. Any offer of employment is conditioned upon the successful completion of a background check. Wabtec Corporation is committed to taking on the world's toughest challenges. In order to fulfill that commitment we rely on a culture of leadership, diversity and inclusiveness. We aim to employ the world's brightest minds to help us create a limitless source of ideas and opportunities. We believe in hiring talented people of varied backgrounds, experiences and styles people like you! Wabtec Corporation is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or expression, or protected Veteran status. If you have a disability or special need that requires accommodation, please let us know. About Us Want to move the world? Want to innovate and bring that innovation to life? At Wabtec, we are in the business of realizing potential - that of the transportation industry, and yours! Drawing on nearly four centuries of collective success across the vibrant portfolios of Wabtec, GE Transportation and Faiveley Transport, we offer employees hands-on opportunities all over the world to shape the future of transportation - as well as their own. Wabtec is focused on performance that drives progress, leveraging our digital expertise, technological innovation, and world-class manufacturing and services to create transportation solutions that move and improve the world. Along with our industry-leading portfolio of products and solutions for the rail and transit industries, Wabtec is a leader in mining, marine, and industrial solutions. Wabtec celebrates thinkers and doers. Our values included in the About Us page are rooted in innovation, collaboration, inclusiveness, and continuous improvement to solve our customers' toughest challenges. Whether your talents lie in digital solution development, next-gen manufacturing, advanced service delivery, or the spectrum of business functions that support them, Wabtec literally has a world of opportunity for you across our global network. Our employees are the architects of the future. Where will you be tomorrow?
Role: Electronics Engineer (PERM Role) Location: Chertsey, Surrey, KT16 9JX Salary: 50 K - 65 K + Benefits Job Purpose: We are delighted to be growing our electronics opportunities with this new role of Electronics Engineer. In this role, you will collaborate with and learn from a small team of highly-skilled design engineers, contributing to the delivery of high-quality products and systems for the defence industry, specifically at the very start of our Maritime Communications business stream. To be successful in the role we are looking for you to have experience in translating system requirements into innovative electronic design solutions. Your role will be instrumental in ensuring successful customer acceptance within specified project timelines and budgets. Candidate Requirements: Responsible for the architectural and detailed design of electronics solutions to meet requirements. Work with other internal design disciplines, and external suppliers, to develop successful design solutions. Consideration of design for manufacture and test, to ensure smooth transition to production. Systems integration of solutions, including fault finding. Work with external test houses to demonstrate equipment complies with MoD and European standards, including CE/UKCA marking. Comply with all health and safety requirements and safe practices and procedures operated by the company. Prepare high-quality documentation and drawings associated with the development lifecycle (e.g.,) Bill of Materials, schematics and Change Notes), and configuration in accordance with company procedures. Assist and liaise with project teams on electronic aspects of products and systems. Occasional offsite support to install and maintain products and systems. Skills and Qualifications: Broad electronics design experience in both Analogue and digital design techniques including: Power Supply Design Design for EMC Compliance Working knowledge of ECAD tools for circuit & PCB design (Cadence OrCAD desirable). Ability to multi-task and prioritise workload with a hands-on approach. Problem-solving and fault-finding down to component level. Able to work with internal and external stakeholders to develop solutions.
Mar 28, 2024
Full time
Role: Electronics Engineer (PERM Role) Location: Chertsey, Surrey, KT16 9JX Salary: 50 K - 65 K + Benefits Job Purpose: We are delighted to be growing our electronics opportunities with this new role of Electronics Engineer. In this role, you will collaborate with and learn from a small team of highly-skilled design engineers, contributing to the delivery of high-quality products and systems for the defence industry, specifically at the very start of our Maritime Communications business stream. To be successful in the role we are looking for you to have experience in translating system requirements into innovative electronic design solutions. Your role will be instrumental in ensuring successful customer acceptance within specified project timelines and budgets. Candidate Requirements: Responsible for the architectural and detailed design of electronics solutions to meet requirements. Work with other internal design disciplines, and external suppliers, to develop successful design solutions. Consideration of design for manufacture and test, to ensure smooth transition to production. Systems integration of solutions, including fault finding. Work with external test houses to demonstrate equipment complies with MoD and European standards, including CE/UKCA marking. Comply with all health and safety requirements and safe practices and procedures operated by the company. Prepare high-quality documentation and drawings associated with the development lifecycle (e.g.,) Bill of Materials, schematics and Change Notes), and configuration in accordance with company procedures. Assist and liaise with project teams on electronic aspects of products and systems. Occasional offsite support to install and maintain products and systems. Skills and Qualifications: Broad electronics design experience in both Analogue and digital design techniques including: Power Supply Design Design for EMC Compliance Working knowledge of ECAD tools for circuit & PCB design (Cadence OrCAD desirable). Ability to multi-task and prioritise workload with a hands-on approach. Problem-solving and fault-finding down to component level. Able to work with internal and external stakeholders to develop solutions.
RF Microwave Design Engineer JOB LOCATION: Stevenage SECURITY CLEARANCE LEVEL - BPSS / SC Before Starting DURATION: 6-12 Months Minimum WORK PATTERN: 3 days a week onsite, 2 from home RATE: 60 - 65 Per hr on Umbrella (Inside IR35) Overview: This role is to work on a new seeker with a fast-paced programme within a dynamic team. The engineer must have a high degree of enthusiasm and a determination to deliver products to the right standard within the required timescales. Role Requirements (skills, training and qualifications): Design active mixed signal RF/microwave modules (including transmitters, receivers, synthesisers) for RF seekers. Interact with internal customers and suppliers to develop circuits to requirements including cost, volume constraints and environmental specifications. Prove designs meet requirements by creating and testing to test specifications. Provide technical support to existing designs, support production failures in the factory, solve obsolescence issues. Role Requirements (skills, training and qualifications): 1. Active microwave, RF and analogue circuit design including simulation and layout using ADS (or similar) design tools. 2. Awareness of high-speed digital electronics and FPGA circuit design. 3. Ability to perform design proving test and trials in laboratory. 4. Ability to test and diagnose hardware problems using standard and specialist test equipment such as VNAs. 5. Working with electronics design teams to transfer schematics into layouts for mixed signal circuit boards. 6. Fully conversant with manufacturing techniques and capabilities including design for manufacture and test. 7. Ability to develop IDDs for designs, assess thermal management and component de-rating, 8. Understanding of and use of engineering tools, processes and procedures to publish designs, record compliance against requirements, identify and resolve non-conformances.
Mar 28, 2024
Contractor
RF Microwave Design Engineer JOB LOCATION: Stevenage SECURITY CLEARANCE LEVEL - BPSS / SC Before Starting DURATION: 6-12 Months Minimum WORK PATTERN: 3 days a week onsite, 2 from home RATE: 60 - 65 Per hr on Umbrella (Inside IR35) Overview: This role is to work on a new seeker with a fast-paced programme within a dynamic team. The engineer must have a high degree of enthusiasm and a determination to deliver products to the right standard within the required timescales. Role Requirements (skills, training and qualifications): Design active mixed signal RF/microwave modules (including transmitters, receivers, synthesisers) for RF seekers. Interact with internal customers and suppliers to develop circuits to requirements including cost, volume constraints and environmental specifications. Prove designs meet requirements by creating and testing to test specifications. Provide technical support to existing designs, support production failures in the factory, solve obsolescence issues. Role Requirements (skills, training and qualifications): 1. Active microwave, RF and analogue circuit design including simulation and layout using ADS (or similar) design tools. 2. Awareness of high-speed digital electronics and FPGA circuit design. 3. Ability to perform design proving test and trials in laboratory. 4. Ability to test and diagnose hardware problems using standard and specialist test equipment such as VNAs. 5. Working with electronics design teams to transfer schematics into layouts for mixed signal circuit boards. 6. Fully conversant with manufacturing techniques and capabilities including design for manufacture and test. 7. Ability to develop IDDs for designs, assess thermal management and component de-rating, 8. Understanding of and use of engineering tools, processes and procedures to publish designs, record compliance against requirements, identify and resolve non-conformances.
What's Next? Join ZF! ZF is a global technology company supplying systems for passenger cars, commercial vehicles and industrial technology, enabling the next generation of mobility. ZF allows vehicles to see, think and act. In the four technology domains of Vehicle Motion Control, Integrated Safety, Automated Driving, and Electric Mobility, ZF offers comprehensive product and software solutions for established vehicle manufacturers and newly emerging transport and mobility service providers. ZF electrifies a wide range of vehicle types. With its products, the company contributes to reducing emissions, protecting the climate and enhancing safe mobility. Test Engineer (m/f/d) Country/Region: GB Location: Peterlee, ENG, GB, SR8 2HR Req ID 64610 Elec Op - Peterlee, United Kingdom About the team: We are strengthening our Test Engineering team in the area of Electronics and ADAS at our location in Peterlee. The team is responsible for all final functional testing across the plant. It is high-speed, high-volume for different products. This role will be in charge of the ADAS products especially camera which is a niche in the area of automotive components. As test engineer you will bring in test equipment, launch new products on test equipment and debug it. Furthermore, you will work on improvements to existing products and equipment. What you can look forward to as Test Engineer (m/f/d): You will be working within a diverse team of test engineers supporting a high-volume production facility Responsible for End Of Line testing across the product range you will be working with external suppliers and ZF engineering design centres to deliver new test solutions for a wide range of safety and ADAS products Processes under your control would include final functional test for ADAS products (e. g. camera) Programming and debugging bespoke test equipment you will also support a highly skilled maintenance department with issues beyond their skill set You will review test systems, monitoring performance, OEE and running yields to continuously improve performance Your profile as Test Engineer (m/f/d): Bachelor's degree preferred in Computer science, Electrical engineering or Programming Strong electronic background required Experience in a high paced production environment essential Must have knowledge and experience of programming languages such as Python, VB.net and C++. Experience with CAN bus systems, CANoe, CANalyzer and Vector tool configuration advantageous The position is part of the ZF Global Employee Referral Program. Be part of our ZF team as Test Engineer (m/f/d) and apply now! Contact Anne Jügling What does DEI (Diversity, Equity, Inclusion) mean for ZF as a company? At ZF, we continuously strive to build and maintain a culture where inclusiveness is lived and diversity is valued. We actively seek ways to remove barriers so that all our employees can rise to their full potential. We aim to embed this vision in our legacy through how we operate and build our products as we shape the future of mobility. Find out how we work at ZF: Job Segment: Test Engineer, Facilities, Electronics Engineer, Electrical Engineering, Engineer, Engineering, Operations
Mar 28, 2024
Full time
What's Next? Join ZF! ZF is a global technology company supplying systems for passenger cars, commercial vehicles and industrial technology, enabling the next generation of mobility. ZF allows vehicles to see, think and act. In the four technology domains of Vehicle Motion Control, Integrated Safety, Automated Driving, and Electric Mobility, ZF offers comprehensive product and software solutions for established vehicle manufacturers and newly emerging transport and mobility service providers. ZF electrifies a wide range of vehicle types. With its products, the company contributes to reducing emissions, protecting the climate and enhancing safe mobility. Test Engineer (m/f/d) Country/Region: GB Location: Peterlee, ENG, GB, SR8 2HR Req ID 64610 Elec Op - Peterlee, United Kingdom About the team: We are strengthening our Test Engineering team in the area of Electronics and ADAS at our location in Peterlee. The team is responsible for all final functional testing across the plant. It is high-speed, high-volume for different products. This role will be in charge of the ADAS products especially camera which is a niche in the area of automotive components. As test engineer you will bring in test equipment, launch new products on test equipment and debug it. Furthermore, you will work on improvements to existing products and equipment. What you can look forward to as Test Engineer (m/f/d): You will be working within a diverse team of test engineers supporting a high-volume production facility Responsible for End Of Line testing across the product range you will be working with external suppliers and ZF engineering design centres to deliver new test solutions for a wide range of safety and ADAS products Processes under your control would include final functional test for ADAS products (e. g. camera) Programming and debugging bespoke test equipment you will also support a highly skilled maintenance department with issues beyond their skill set You will review test systems, monitoring performance, OEE and running yields to continuously improve performance Your profile as Test Engineer (m/f/d): Bachelor's degree preferred in Computer science, Electrical engineering or Programming Strong electronic background required Experience in a high paced production environment essential Must have knowledge and experience of programming languages such as Python, VB.net and C++. Experience with CAN bus systems, CANoe, CANalyzer and Vector tool configuration advantageous The position is part of the ZF Global Employee Referral Program. Be part of our ZF team as Test Engineer (m/f/d) and apply now! Contact Anne Jügling What does DEI (Diversity, Equity, Inclusion) mean for ZF as a company? At ZF, we continuously strive to build and maintain a culture where inclusiveness is lived and diversity is valued. We actively seek ways to remove barriers so that all our employees can rise to their full potential. We aim to embed this vision in our legacy through how we operate and build our products as we shape the future of mobility. Find out how we work at ZF: Job Segment: Test Engineer, Facilities, Electronics Engineer, Electrical Engineering, Engineer, Engineering, Operations
Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK for 5 years. Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. Office site presence, anticipated 2-3 days onsite, depending on project needs. Want to work for a successful business, who develop advanced specialist systems to deliver warfighting edge in the modern maritime and underwater battlespace? The company have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! An opportunity has arisen for a Senior Systems Engineer to join a growing team. This role will be supporting new design work and existing products. The Systems Engineering function provides expertise to all projects through the bid and full development lifecycle. It ensures that both project and statutory requirements are met and works to improve the effectiveness of the systems design function within the company. It is responsible for the system architecture and integration of the solution. It is responsible for design for cost and design for manufacture. A Systems Engineer may also be required to undertake roles such as Project Engineering Lead, Work Package Manager or Lab Manager for which support development and production programmes ranging from tens of k to several m. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience and a full understanding of Systems Engineering, the V-Model and associated processes/lifecycle. Experience of developing high quality requirements and establishing a fully compliant systems design. Experience in writing high quality technical documentation and the formal technical review of such material. Experience in the following would be desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Experience of JAMA and hands-on development of either hardware, software or firmware development, particularly in an embedded environment. For full information, please get in touch!
Mar 28, 2024
Full time
Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK for 5 years. Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. Office site presence, anticipated 2-3 days onsite, depending on project needs. Want to work for a successful business, who develop advanced specialist systems to deliver warfighting edge in the modern maritime and underwater battlespace? The company have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! An opportunity has arisen for a Senior Systems Engineer to join a growing team. This role will be supporting new design work and existing products. The Systems Engineering function provides expertise to all projects through the bid and full development lifecycle. It ensures that both project and statutory requirements are met and works to improve the effectiveness of the systems design function within the company. It is responsible for the system architecture and integration of the solution. It is responsible for design for cost and design for manufacture. A Systems Engineer may also be required to undertake roles such as Project Engineering Lead, Work Package Manager or Lab Manager for which support development and production programmes ranging from tens of k to several m. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience and a full understanding of Systems Engineering, the V-Model and associated processes/lifecycle. Experience of developing high quality requirements and establishing a fully compliant systems design. Experience in writing high quality technical documentation and the formal technical review of such material. Experience in the following would be desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Experience of JAMA and hands-on development of either hardware, software or firmware development, particularly in an embedded environment. For full information, please get in touch!
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
Mar 27, 2024
Full time
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
Opportunity: We value experienced, well qualified engineers that relish solving challenging engineering problems in pursuit of delighting our customers. We develop niche solutions for environments across a wide product range, covering electric field sensors for deep ocean exploration to high power electric motors and converters for a range of customers. We work in integrated product teams and expect our engineers to be capable of working from concept to delivery, equally able to formulate a concept solution, conduct the supporting analysis, and support the build through the production phase. We currently have an opportunity for a Power Engineer to support the design, manufacture and supply of novel power dense static converters and motors. Engineers will be responsible for delivering robust and cost-effective power electronic solutions to a range of niche applications such as submarine power systems, high integrity power supplies, naval propulsion, and specialist industrial drive systems. There will be involvement in all stages of the engineering lifecycle; from concept through to verification and validation of production systems. Responsibilities: To perform a wide range of engineering work covering all stages of the project from bid to delivery. To plan and conduct engineering tasks requiring judgment in the evaluation, selection and adaptation of designs or design techniques to meet the agreed requirements. To be accountable for the technical performance of the product. To work closely with senior team members to plan and co-ordinate the project. To coordinate technical activities within the team. To be the primary technical point of contact with the customer. To contribute to project meetings and to deliver detailed technical and progress reports. To keep up to date with the state of the art in the chosen area by attending seminars and studying the technical literature. Support other activities in the business such as business improvement initiatives. Experience needed: Educated to degree level or equivalent in electrical engineering or a related discipline. Experience using design/simulation tools such as MATLAB and Simulink. Skills and experience in the field of power electronics. A proven track record of product design and test in a relevant environments. Broad knowledge of other areas of engineering (e.g. systems, mechanical, motors, etc.) Good knowledge of best practice design lifecycle process; gated design phases, design reviews etc. Good in front of customers; willing and able to make presentations. Skills and experience in the 'live' testing of low voltage (i.e. Roles are subject to security clearance without restrictions Desir able: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. For full information, please get in touch.
Mar 27, 2024
Full time
Opportunity: We value experienced, well qualified engineers that relish solving challenging engineering problems in pursuit of delighting our customers. We develop niche solutions for environments across a wide product range, covering electric field sensors for deep ocean exploration to high power electric motors and converters for a range of customers. We work in integrated product teams and expect our engineers to be capable of working from concept to delivery, equally able to formulate a concept solution, conduct the supporting analysis, and support the build through the production phase. We currently have an opportunity for a Power Engineer to support the design, manufacture and supply of novel power dense static converters and motors. Engineers will be responsible for delivering robust and cost-effective power electronic solutions to a range of niche applications such as submarine power systems, high integrity power supplies, naval propulsion, and specialist industrial drive systems. There will be involvement in all stages of the engineering lifecycle; from concept through to verification and validation of production systems. Responsibilities: To perform a wide range of engineering work covering all stages of the project from bid to delivery. To plan and conduct engineering tasks requiring judgment in the evaluation, selection and adaptation of designs or design techniques to meet the agreed requirements. To be accountable for the technical performance of the product. To work closely with senior team members to plan and co-ordinate the project. To coordinate technical activities within the team. To be the primary technical point of contact with the customer. To contribute to project meetings and to deliver detailed technical and progress reports. To keep up to date with the state of the art in the chosen area by attending seminars and studying the technical literature. Support other activities in the business such as business improvement initiatives. Experience needed: Educated to degree level or equivalent in electrical engineering or a related discipline. Experience using design/simulation tools such as MATLAB and Simulink. Skills and experience in the field of power electronics. A proven track record of product design and test in a relevant environments. Broad knowledge of other areas of engineering (e.g. systems, mechanical, motors, etc.) Good knowledge of best practice design lifecycle process; gated design phases, design reviews etc. Good in front of customers; willing and able to make presentations. Skills and experience in the 'live' testing of low voltage (i.e. Roles are subject to security clearance without restrictions Desir able: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. For full information, please get in touch.
Job Title: Manufacturing Engineer - Electromechanical or Electronic Location: Farnborough, UK Contract Duration: 12 months, contract Essential Functions/Responsibilities: 1. Support the Shop Floor in troubleshooting (eg PCBA fault finding); disposition of Non-Conformance Reports (eg Rework/Return to Vendor/Scrap) 2. Support the Shop floor in reducing the Standard Cost and Lead Time of a product. 3. Support Supplier improvement activities 4. Develop manufacturing processes for New Product Introduction and production tools. 5. Ability to use statistical analysis to identify trends and identify cause and effect relationships Skills: 1. Create/Update Manufacturing Documentation (Assembly/Test Instructions) 2. Design necessary fixtures; tooling; test boxes 3. Apply LEAN manufacturing techniques to eliminate/reduce WASTE 4. Justification and implementation of new equipment Qualifications: A Degree in Engineering is preferred. However, the minimum required would be an HNC in an electronics discipline. Desired Characteristics: 1. A minimum of min years' experience in a Manufacturing, or Production Engineering role which includes providing Shop Floor support. 2. Ability to analyse problems, identify root causes and provide efficient solutions, fault find down to component level as required. 3. DOE testing to determine the factors effecting inputs and outputs. 4. Six Sigma, Shainin experience 5. Ability to work cross functionally and the ability to prioritise multiple projects. 6. IPC Class III inspection
Mar 26, 2024
Contractor
Job Title: Manufacturing Engineer - Electromechanical or Electronic Location: Farnborough, UK Contract Duration: 12 months, contract Essential Functions/Responsibilities: 1. Support the Shop Floor in troubleshooting (eg PCBA fault finding); disposition of Non-Conformance Reports (eg Rework/Return to Vendor/Scrap) 2. Support the Shop floor in reducing the Standard Cost and Lead Time of a product. 3. Support Supplier improvement activities 4. Develop manufacturing processes for New Product Introduction and production tools. 5. Ability to use statistical analysis to identify trends and identify cause and effect relationships Skills: 1. Create/Update Manufacturing Documentation (Assembly/Test Instructions) 2. Design necessary fixtures; tooling; test boxes 3. Apply LEAN manufacturing techniques to eliminate/reduce WASTE 4. Justification and implementation of new equipment Qualifications: A Degree in Engineering is preferred. However, the minimum required would be an HNC in an electronics discipline. Desired Characteristics: 1. A minimum of min years' experience in a Manufacturing, or Production Engineering role which includes providing Shop Floor support. 2. Ability to analyse problems, identify root causes and provide efficient solutions, fault find down to component level as required. 3. DOE testing to determine the factors effecting inputs and outputs. 4. Six Sigma, Shainin experience 5. Ability to work cross functionally and the ability to prioritise multiple projects. 6. IPC Class III inspection
Optical Engineer, Didcot, £45,000 - £50,000 Our client are a very exciting and pioneering engineering business, that are designing and developing world leading detection and monitoring devices. The responsibilities for the Optical Engineer: You will have a key role in the design and development of the sensor instruments, which are based on state-of-the-art laser spectroscopy. This will involve: Design and evaluation of optical system concepts Modelling and tolerancing of free space optical systems Understanding of laser spectroscopy signals Building and testing of prototype assemblies Alignment of optical systems Develop optical assembly and test processes and documentation Assisting in service and maintenance of instruments and accessories Contributing to continuous improvement of the instrument design Supporting best practices in health, safety, and environmental management Your day-to-day responsibilities will further develop your understanding of optics, laser spectroscopy, electronics, and mechanics as you develop the instrumentation. By performing these tasks, you will play an important role in ensuring the development of a high quality, efficiently manufactured product that delivers reliable, repeatable, and high-quality measurements under all field conditions. About you You have good knowledge and experience of optical systems in both analysis and hands-on work including its integration into complex technical systems. Your attention to detail in analysis and testing will guide the product design and development work leading towards consistent manufacture, testing, and quality by working with the engineering and production teams. It will be desirable if you also have experience of CAD software and fibre optics. MARS Recruitment is an equal opportunities employer and positively welcomes applications from suitably qualified applicants regardless of race, colour, sex, marital status, national origin, religion, age, disability, or any other protected status. Suitable candidates for the role will be contacted within 3 working days, unfortunately if you haven't heard back in this time your application has been unsuccessful at this time.MARS Recruitment is a specialist Engineering & IT recruiter working in partnership with companies across the UK and offers services of both an Employment Business (for Temporary/Contract roles) and an Employment Agency (for Permanent roles).
Mar 26, 2024
Full time
Optical Engineer, Didcot, £45,000 - £50,000 Our client are a very exciting and pioneering engineering business, that are designing and developing world leading detection and monitoring devices. The responsibilities for the Optical Engineer: You will have a key role in the design and development of the sensor instruments, which are based on state-of-the-art laser spectroscopy. This will involve: Design and evaluation of optical system concepts Modelling and tolerancing of free space optical systems Understanding of laser spectroscopy signals Building and testing of prototype assemblies Alignment of optical systems Develop optical assembly and test processes and documentation Assisting in service and maintenance of instruments and accessories Contributing to continuous improvement of the instrument design Supporting best practices in health, safety, and environmental management Your day-to-day responsibilities will further develop your understanding of optics, laser spectroscopy, electronics, and mechanics as you develop the instrumentation. By performing these tasks, you will play an important role in ensuring the development of a high quality, efficiently manufactured product that delivers reliable, repeatable, and high-quality measurements under all field conditions. About you You have good knowledge and experience of optical systems in both analysis and hands-on work including its integration into complex technical systems. Your attention to detail in analysis and testing will guide the product design and development work leading towards consistent manufacture, testing, and quality by working with the engineering and production teams. It will be desirable if you also have experience of CAD software and fibre optics. MARS Recruitment is an equal opportunities employer and positively welcomes applications from suitably qualified applicants regardless of race, colour, sex, marital status, national origin, religion, age, disability, or any other protected status. Suitable candidates for the role will be contacted within 3 working days, unfortunately if you haven't heard back in this time your application has been unsuccessful at this time.MARS Recruitment is a specialist Engineering & IT recruiter working in partnership with companies across the UK and offers services of both an Employment Business (for Temporary/Contract roles) and an Employment Agency (for Permanent roles).
Design Electronics Engineer AG Products is a leading company focussed on improving the agricultural industry through innovative software solutions. Leading the industry though innovation, this is an attractive opportunity to inspire change within Agriculture. We design, manufacture, sell and support, systems for the Agricultural industry. We are currently recruiting for the position of Design Electronics Engineer at our Cheshire office. This position is full-time on site position. Ideally you will be qualified to degree level or equivalent and have at least 5 years experience in electronic PCB design and have a strong background in mathematics. You will be a talented all-rounder with digital and analogue design skills and can work in a multi-disciplined design and development team. You will possess excellent interpersonal skills, have problem solving and creativity skills, honesty and integrity, an eagerness to learn and a high level of personal motivation, drive and energy. Benefits: Company events Company pension On-site parking Sick pay Key requirements: Digital/Analogue systems design and integration Design of systems which utilise microcontrollers HDL (hardware description language) in particular VHDL Through your academic studies and your industrial experience, you should have a excellent theoretical and practical knowledge of electronics and electrical systems. Duties will include : Requirements definition for new products or improvements to existing products. Schematic design for electronic circuits required for a product range involving measurement sensors, microcontrollers, processors, FPGA, and other communications. Producing PCB layouts, define and undertake qualification on the PCB layout for sub-contract manufacturers. Specify, design and document electronic circuit boards and PCB subassemblies technical solutions to meet specific application requirements Ensuring that designs are tested in accordance with, and comply with requirement specifications, including taking an active role in analysis of faults or non-compliances, and presenting solutions to problems that may arise. Preparing design documentation, undertaking design reviews, managing version and release control to meet or exceed ISO9001. Developing diagnostics tools for products and related sub-systems using appropriate toolsets such as Python. Be proactive regarding new designs and new technology that can be used in future developments. Qualifications: Bachelor's degree from an accredited university or college (or equivalent qualification) in Electrical Engineering or equivalent subject. Experience of working within a technical team of Software, Hardware, Control engineers. Knowledge of IPC standards relevant to PCB design. By joining us, you'll have: The ability to make a measurable difference in a small company, building cutting edge technology. Fast-paced environment with a positive, talented team. Merit-based compensation. A pivotal role in the development and innovations of products that will be used widely across the whole of the UK and overseas, positively impacting food production on farms. As a market-leading manufacturer of agricultural machinery we have been going from strength to strength and is rapidly expanding, making this a fantastic time to work for us. If you feel you have the necessary qualities and qualifications to join our team please send your CV and covering letter to us explaining why this job is right for you. Salary will be competitive and dependent on experience. For further information visit our website at AG Products
Mar 23, 2024
Full time
Design Electronics Engineer AG Products is a leading company focussed on improving the agricultural industry through innovative software solutions. Leading the industry though innovation, this is an attractive opportunity to inspire change within Agriculture. We design, manufacture, sell and support, systems for the Agricultural industry. We are currently recruiting for the position of Design Electronics Engineer at our Cheshire office. This position is full-time on site position. Ideally you will be qualified to degree level or equivalent and have at least 5 years experience in electronic PCB design and have a strong background in mathematics. You will be a talented all-rounder with digital and analogue design skills and can work in a multi-disciplined design and development team. You will possess excellent interpersonal skills, have problem solving and creativity skills, honesty and integrity, an eagerness to learn and a high level of personal motivation, drive and energy. Benefits: Company events Company pension On-site parking Sick pay Key requirements: Digital/Analogue systems design and integration Design of systems which utilise microcontrollers HDL (hardware description language) in particular VHDL Through your academic studies and your industrial experience, you should have a excellent theoretical and practical knowledge of electronics and electrical systems. Duties will include : Requirements definition for new products or improvements to existing products. Schematic design for electronic circuits required for a product range involving measurement sensors, microcontrollers, processors, FPGA, and other communications. Producing PCB layouts, define and undertake qualification on the PCB layout for sub-contract manufacturers. Specify, design and document electronic circuit boards and PCB subassemblies technical solutions to meet specific application requirements Ensuring that designs are tested in accordance with, and comply with requirement specifications, including taking an active role in analysis of faults or non-compliances, and presenting solutions to problems that may arise. Preparing design documentation, undertaking design reviews, managing version and release control to meet or exceed ISO9001. Developing diagnostics tools for products and related sub-systems using appropriate toolsets such as Python. Be proactive regarding new designs and new technology that can be used in future developments. Qualifications: Bachelor's degree from an accredited university or college (or equivalent qualification) in Electrical Engineering or equivalent subject. Experience of working within a technical team of Software, Hardware, Control engineers. Knowledge of IPC standards relevant to PCB design. By joining us, you'll have: The ability to make a measurable difference in a small company, building cutting edge technology. Fast-paced environment with a positive, talented team. Merit-based compensation. A pivotal role in the development and innovations of products that will be used widely across the whole of the UK and overseas, positively impacting food production on farms. As a market-leading manufacturer of agricultural machinery we have been going from strength to strength and is rapidly expanding, making this a fantastic time to work for us. If you feel you have the necessary qualities and qualifications to join our team please send your CV and covering letter to us explaining why this job is right for you. Salary will be competitive and dependent on experience. For further information visit our website at AG Products
Back Market is the world's leading refurbished electronics marketplace with a team of 650 people, powering operations in 21 countries (and counting!). Named one of the World's Most Innovative Companies by Fast Company in 2019 and again in 2021, our mission is simple: empowering people to consume tech sustainably by offering folks a high quality, accessible, and more eco-friendly alternative to buying new electronics. Why? Refurbished tech helps lower our collective environmental impact . We have indeed contributed to avoid the production of more than 1,000,000 tons of CO2e worldwide since our launch in 2014. Be part of an exciting and growing international adventure that will change the way the world consumes tech. As Product Director at Back Market, you will play a pivotal role in shaping our product strategy and managing a talented team of 10+ individuals, including three team leads. Reporting to the Chief Product Officer and leading the Money Journey; Platform; and Global Growth teams, you will drive innovation, foster collaboration, and contribute to the sustainable growth of our product. Responsibilities Money Journey Team: Oversee the development and optimization of payment & financial systems, order management systems, and financial flows. Ensuring seamless and secure payment processes, both payin and payout, for our customers and sellers. Collaborate with cross-functional teams to drive initiatives related to financial transactions and revenue growth. Monitor and analyze financial data to make informed product decisions. Platform Team: Lead the product strategy for the platform, ensuring a user-friendly, impact driven and efficient experience for multiple users, including engineering and product teams at Back Market. Work closely with engineering teams to ensure the right level of trust and safety in our technical stack, especially on authentication and authorization systems. Drive transversal and transformative projects to keep our technical stack up to date and capable of answering our business needs in the future. Global Growth Team: Develop and execute strategies for global market expansion, and country adaptation, identifying opportunities for growth and scalability. Back Market is present in 18 countries and 3 continents and we need to make sure our product is fit for success in a vast geographic footprint while keeping our stack highly scalable. Collaborate cross-functionally to align product initiatives with business objectives. Analyze market trends and competitive landscapes to drive innovation and differentiation. Key Hard Skills Strategic Thinking: Develop and execute a comprehensive product strategy aligned with business objectives. Demonstrate a forward-thinking approach to identify market trends, opportunities, and potential risks. Implement data-driven decision-making processes to inform strategic initiatives. Product Management Experience: Showcase a solid background in product management with a track record of successful product launches and optimizations. Leverage experience in driving cross-functional teams to deliver high-quality products within established timelines. Apply best practices in product development, including agile methodologies and user-centric design principles. Team Leadership: Manage and mentor a diverse team of 10+ individuals. Provide guidance and support to foster a collaborative and high-performing team culture. Oversee professional development plans and ensure the growth of team members. Soft Skills Emphasis Communication Skills: Be a great communicator, adept at conveying complex ideas and strategies to both technical and non-technical stakeholders. Foster open and transparent communication within the team and across departments. Mission Alignment: Embrace and champion Back Market's mission in promoting sustainability and reducing CO2 emissions through refurbished technology. Demonstrate a strong commitment to ethical and environmentally responsible business practices. Requirements & qualifications Proven experience as a Product Director or in a similar leadership role within a tech-focused company. Strong background in Product Management, with a track record of successful product launches and optimizations. Experience leading and managing cross-functional teams, including team leads. Exceptional strategic thinking, problem-solving, and analytical skills. Excellent communication and interpersonal abilities. Bachelor's degree in Business, Marketing, Computer Science, or a related field; MBA is a plus. At least 10 years of experience in product management and leadership roles. Demonstrated success in driving global growth strategies. Experience in marketplaces is highly desirable. WHY SHOULD YOU JOIN US - A meaningful job: you will help avoid thousands of tons of electronic waste and fight against planned obsolescence. It counts! - A meaningful company: we became a mission-driven company in January 2022. - Be part of a worldwide growing company based in Europe, the USA and Asia to face great challenges : you will have the freedom to innovate and adopt new ideas! - Work alongside passionate experts: who will share their knowledge and help you develop and grow in your career. - Grow your career: with a flexible career path and a dedicated Learning & Development team. Back Market will help you evolve with personalized internal trainings and external handpicked providers from day 1! - Leadership Academy by Back Market:"be a coach not a dictator" is at the core of this program ! We train and enable all our leaders to support their team towards achieving goals. Be a manager at Back Market is an unique experience we take by heart. - An attractive salary, equity and a host of benefits including : Lunch voucher, health insurance, relocation package, paid time off for activism in your community, parental benefits, flexible hours, etc - Remote friendly company : up to 3 days of remote work per week! - One Loving Tribe: you will have the opportunity to work in a fast-paced, open-minded and friendly environment. - Be part of one of our Employee Resource Groups createdaround shared identities, common backgrounds and/or special interests crafted to be a safe space and an expressive outlet. - Several internal events: The Monday Brief (weekly)/ The Somehands (monthly)/ The All Hands (annual). - We're here to SABOTAGE: It's our mantra. It keeps us focused on what we aspire to be: a little bit sneaky, always smart, kinda frugal and constantly conspiring to create maximum impact. Back Market is an Equal Opportunity Employer which means we pledge to not discriminate against employees based on race, color, religion, sex, national origin, age, disability or genetic information If reasonable accommodations are needed for the interview process, please do not hesitate to discuss this with the Talent Acquisition Team. Back Market is helping to address one of the biggest challenges of our time: climate change. We take this so seriously that we were awarded status as a "Société à Mission", or company with a social mission, by the French government. We know we can't tackle a global problem without a globally representative team so we are committed to embedding diversity, equity and inclusion principles in every aspect of our organization. But more importantly, being One Loving & Free Spirited Tribe is in our DNA as it is one of the five foundational values of our company since we got started way back in 2014. We are committed to hiring and supporting diverse teams of people from all backgrounds, experiences, and perspectives. We know our lofty goals cannot be reached unless everyone has a seat at the table along with the resources and opportunity to grow.
Mar 23, 2024
Full time
Back Market is the world's leading refurbished electronics marketplace with a team of 650 people, powering operations in 21 countries (and counting!). Named one of the World's Most Innovative Companies by Fast Company in 2019 and again in 2021, our mission is simple: empowering people to consume tech sustainably by offering folks a high quality, accessible, and more eco-friendly alternative to buying new electronics. Why? Refurbished tech helps lower our collective environmental impact . We have indeed contributed to avoid the production of more than 1,000,000 tons of CO2e worldwide since our launch in 2014. Be part of an exciting and growing international adventure that will change the way the world consumes tech. As Product Director at Back Market, you will play a pivotal role in shaping our product strategy and managing a talented team of 10+ individuals, including three team leads. Reporting to the Chief Product Officer and leading the Money Journey; Platform; and Global Growth teams, you will drive innovation, foster collaboration, and contribute to the sustainable growth of our product. Responsibilities Money Journey Team: Oversee the development and optimization of payment & financial systems, order management systems, and financial flows. Ensuring seamless and secure payment processes, both payin and payout, for our customers and sellers. Collaborate with cross-functional teams to drive initiatives related to financial transactions and revenue growth. Monitor and analyze financial data to make informed product decisions. Platform Team: Lead the product strategy for the platform, ensuring a user-friendly, impact driven and efficient experience for multiple users, including engineering and product teams at Back Market. Work closely with engineering teams to ensure the right level of trust and safety in our technical stack, especially on authentication and authorization systems. Drive transversal and transformative projects to keep our technical stack up to date and capable of answering our business needs in the future. Global Growth Team: Develop and execute strategies for global market expansion, and country adaptation, identifying opportunities for growth and scalability. Back Market is present in 18 countries and 3 continents and we need to make sure our product is fit for success in a vast geographic footprint while keeping our stack highly scalable. Collaborate cross-functionally to align product initiatives with business objectives. Analyze market trends and competitive landscapes to drive innovation and differentiation. Key Hard Skills Strategic Thinking: Develop and execute a comprehensive product strategy aligned with business objectives. Demonstrate a forward-thinking approach to identify market trends, opportunities, and potential risks. Implement data-driven decision-making processes to inform strategic initiatives. Product Management Experience: Showcase a solid background in product management with a track record of successful product launches and optimizations. Leverage experience in driving cross-functional teams to deliver high-quality products within established timelines. Apply best practices in product development, including agile methodologies and user-centric design principles. Team Leadership: Manage and mentor a diverse team of 10+ individuals. Provide guidance and support to foster a collaborative and high-performing team culture. Oversee professional development plans and ensure the growth of team members. Soft Skills Emphasis Communication Skills: Be a great communicator, adept at conveying complex ideas and strategies to both technical and non-technical stakeholders. Foster open and transparent communication within the team and across departments. Mission Alignment: Embrace and champion Back Market's mission in promoting sustainability and reducing CO2 emissions through refurbished technology. Demonstrate a strong commitment to ethical and environmentally responsible business practices. Requirements & qualifications Proven experience as a Product Director or in a similar leadership role within a tech-focused company. Strong background in Product Management, with a track record of successful product launches and optimizations. Experience leading and managing cross-functional teams, including team leads. Exceptional strategic thinking, problem-solving, and analytical skills. Excellent communication and interpersonal abilities. Bachelor's degree in Business, Marketing, Computer Science, or a related field; MBA is a plus. At least 10 years of experience in product management and leadership roles. Demonstrated success in driving global growth strategies. Experience in marketplaces is highly desirable. WHY SHOULD YOU JOIN US - A meaningful job: you will help avoid thousands of tons of electronic waste and fight against planned obsolescence. It counts! - A meaningful company: we became a mission-driven company in January 2022. - Be part of a worldwide growing company based in Europe, the USA and Asia to face great challenges : you will have the freedom to innovate and adopt new ideas! - Work alongside passionate experts: who will share their knowledge and help you develop and grow in your career. - Grow your career: with a flexible career path and a dedicated Learning & Development team. Back Market will help you evolve with personalized internal trainings and external handpicked providers from day 1! - Leadership Academy by Back Market:"be a coach not a dictator" is at the core of this program ! We train and enable all our leaders to support their team towards achieving goals. Be a manager at Back Market is an unique experience we take by heart. - An attractive salary, equity and a host of benefits including : Lunch voucher, health insurance, relocation package, paid time off for activism in your community, parental benefits, flexible hours, etc - Remote friendly company : up to 3 days of remote work per week! - One Loving Tribe: you will have the opportunity to work in a fast-paced, open-minded and friendly environment. - Be part of one of our Employee Resource Groups createdaround shared identities, common backgrounds and/or special interests crafted to be a safe space and an expressive outlet. - Several internal events: The Monday Brief (weekly)/ The Somehands (monthly)/ The All Hands (annual). - We're here to SABOTAGE: It's our mantra. It keeps us focused on what we aspire to be: a little bit sneaky, always smart, kinda frugal and constantly conspiring to create maximum impact. Back Market is an Equal Opportunity Employer which means we pledge to not discriminate against employees based on race, color, religion, sex, national origin, age, disability or genetic information If reasonable accommodations are needed for the interview process, please do not hesitate to discuss this with the Talent Acquisition Team. Back Market is helping to address one of the biggest challenges of our time: climate change. We take this so seriously that we were awarded status as a "Société à Mission", or company with a social mission, by the French government. We know we can't tackle a global problem without a globally representative team so we are committed to embedding diversity, equity and inclusion principles in every aspect of our organization. But more importantly, being One Loving & Free Spirited Tribe is in our DNA as it is one of the five foundational values of our company since we got started way back in 2014. We are committed to hiring and supporting diverse teams of people from all backgrounds, experiences, and perspectives. We know our lofty goals cannot be reached unless everyone has a seat at the table along with the resources and opportunity to grow.
Electronic Design Engineer Location: Birmingham, B5 7HR Salary: £26K - £40K per annum, Depending on Experience. Contract: Full time, Permanent Benefits: Company pension, bonus scheme, life insurance and sick pay! We are John Lilley & Gillie Ltd, the industry leader in the Design and Manufacture of marine navigation equipment and we are recruiting! We have a trading history going back well over 200 years, having a reputation internationally as a well-respected business providing a wide range of quality products and services to the shipping industry. Our products are designed and manufactured in our facility in Birmingham and exported throughout the world! We now have an incredible opportunity to join us as an Electronic Design Engineer expanding the Design Team at our Birmingham production facility. About the Electronic Design Engineer role: You will plan and execute product development projects from initial ideas all the way through to release into manufacturing, ensuring our products meet their design criteria, are fit for purpose and are cost effective. In addition to this, as our Electronic Design Engineer you will be responsible for: Planning and managing projects. Carrying out or assisting in the electronic hardware and software design of products. Ensuring the quality of electronic hardware, embedded software and mechanical design. Ensuring that products comply with the appropriate EMC, Radio, Safety and Environmental standards. Participating in Product Compliance & Type Approval Testing. Ensuring adherence to company quality procedures relating to product development. Providing technical product support for the company's existing products. In order to be successful in this role it is essential that you have: BSc, BEng in Electronic Engineering. Digital and Analogue electronics hardware design experience. PCB CAD Design Software programming (C, C+) Knowledge of Project Management It would be great if you had: Knowledge of product pre-qualification and qualification testing to International Marine Standards Knowledge of Marine Industry If you feel you have the necessary skills and experience to be successful in this role, click on "APPLY" today, forwarding an up-to-date copy of your CV for consideration in the first instance. No agencies please.
Mar 23, 2024
Full time
Electronic Design Engineer Location: Birmingham, B5 7HR Salary: £26K - £40K per annum, Depending on Experience. Contract: Full time, Permanent Benefits: Company pension, bonus scheme, life insurance and sick pay! We are John Lilley & Gillie Ltd, the industry leader in the Design and Manufacture of marine navigation equipment and we are recruiting! We have a trading history going back well over 200 years, having a reputation internationally as a well-respected business providing a wide range of quality products and services to the shipping industry. Our products are designed and manufactured in our facility in Birmingham and exported throughout the world! We now have an incredible opportunity to join us as an Electronic Design Engineer expanding the Design Team at our Birmingham production facility. About the Electronic Design Engineer role: You will plan and execute product development projects from initial ideas all the way through to release into manufacturing, ensuring our products meet their design criteria, are fit for purpose and are cost effective. In addition to this, as our Electronic Design Engineer you will be responsible for: Planning and managing projects. Carrying out or assisting in the electronic hardware and software design of products. Ensuring the quality of electronic hardware, embedded software and mechanical design. Ensuring that products comply with the appropriate EMC, Radio, Safety and Environmental standards. Participating in Product Compliance & Type Approval Testing. Ensuring adherence to company quality procedures relating to product development. Providing technical product support for the company's existing products. In order to be successful in this role it is essential that you have: BSc, BEng in Electronic Engineering. Digital and Analogue electronics hardware design experience. PCB CAD Design Software programming (C, C+) Knowledge of Project Management It would be great if you had: Knowledge of product pre-qualification and qualification testing to International Marine Standards Knowledge of Marine Industry If you feel you have the necessary skills and experience to be successful in this role, click on "APPLY" today, forwarding an up-to-date copy of your CV for consideration in the first instance. No agencies please.
Power Electronics Principal Engineer Salary: Up to 58,000 Depending on Experience Location: Stevenage + Bristol Benefits: Company bonus - Up to 2,500 Flexible working hours (no core hours) Paid overtime (can accrue up to 15 days extra holiday) Pension up to 14% 25 days holiday + Bank Holidays + option to buy 5 more Launchpad Scheme with additional optional benefits About the Opportunity: Our client is an award-winning company; committed to providing an inclusive working environment where our employees can be themselves and everyone has equal opportunity to reach their full potential. They value and know that a diverse community makes for greater innovation and brings a breadth of skills, experience and perspectives. The Role: You will help lead our engineers who are responsible for circuit design, prototyping, testing and integration/design proving of hardware needed for motor control, feedback loops and general control system support during flight. Your role will require you to work at all stages of the project life cycle and deliver a clear and well thought out plan to meet project requirements. You will work with teams of exceptional engineers who are involved in activities from early feasibility and technology assessments through to certification and supporting transition to production. Requirements: Ideally, degree qualified with post qualification experience in Electronic Design, development and delivery. Experience in power electronics, such as for motor control applications, would be an advantage along with a commitment to designing excellent solutions. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. If you are interested in this position, then please contact me via: (phone number removed) or email: (url removed) for more information.
Mar 23, 2024
Full time
Power Electronics Principal Engineer Salary: Up to 58,000 Depending on Experience Location: Stevenage + Bristol Benefits: Company bonus - Up to 2,500 Flexible working hours (no core hours) Paid overtime (can accrue up to 15 days extra holiday) Pension up to 14% 25 days holiday + Bank Holidays + option to buy 5 more Launchpad Scheme with additional optional benefits About the Opportunity: Our client is an award-winning company; committed to providing an inclusive working environment where our employees can be themselves and everyone has equal opportunity to reach their full potential. They value and know that a diverse community makes for greater innovation and brings a breadth of skills, experience and perspectives. The Role: You will help lead our engineers who are responsible for circuit design, prototyping, testing and integration/design proving of hardware needed for motor control, feedback loops and general control system support during flight. Your role will require you to work at all stages of the project life cycle and deliver a clear and well thought out plan to meet project requirements. You will work with teams of exceptional engineers who are involved in activities from early feasibility and technology assessments through to certification and supporting transition to production. Requirements: Ideally, degree qualified with post qualification experience in Electronic Design, development and delivery. Experience in power electronics, such as for motor control applications, would be an advantage along with a commitment to designing excellent solutions. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. If you are interested in this position, then please contact me via: (phone number removed) or email: (url removed) for more information.
Electronic Engineer - Contract - Analogue/Power - Hybrid Cambridge (3 days a week) £60-£110 per hour depending on experience - Outside IR35 8 month Cambridge (working week 37 hours can be performed over 4 days) Our client is seeking talented Electronic Engineer/Design Engineers with strong high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Role: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of analogue circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills Required: Electronics Design experience Analogue Design Experience Experience designing switching power supplies, buck, boost and flyback converters. Experience of communication interfaces and buses - USB, SPI, I2C,MIPI, GPIO Low power circuit design for battery powered products Design for EMC/ESD protection Design for Manufacturing and Test Experience working with radio products would be desirable Lithium battery and charger design experience would be desirable
Mar 22, 2024
Contractor
Electronic Engineer - Contract - Analogue/Power - Hybrid Cambridge (3 days a week) £60-£110 per hour depending on experience - Outside IR35 8 month Cambridge (working week 37 hours can be performed over 4 days) Our client is seeking talented Electronic Engineer/Design Engineers with strong high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Role: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of analogue circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills Required: Electronics Design experience Analogue Design Experience Experience designing switching power supplies, buck, boost and flyback converters. Experience of communication interfaces and buses - USB, SPI, I2C,MIPI, GPIO Low power circuit design for battery powered products Design for EMC/ESD protection Design for Manufacturing and Test Experience working with radio products would be desirable Lithium battery and charger design experience would be desirable
Electronic Engineer - Contract - High Speed Digital Design - Hybrid Cambridge (3 days a week onsite) £60-£110 per hour depending on experience - Outside IR35 8 month Cambridge (working week 37 hours can be performed over 4 days) Our client is seeking talented Electronic Engineer/Design Engineers with strong high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Electronics Design experience High Speed Digital Design High speed digital design interfaces: USB3, MIPI, PCI express, Gigabit Ethernet, DDRX memory High Speed PCB layout and design constraints definition Experience with simulation tools (eg Hyperlynx, Sigrity, ADS,) Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector
Mar 22, 2024
Contractor
Electronic Engineer - Contract - High Speed Digital Design - Hybrid Cambridge (3 days a week onsite) £60-£110 per hour depending on experience - Outside IR35 8 month Cambridge (working week 37 hours can be performed over 4 days) Our client is seeking talented Electronic Engineer/Design Engineers with strong high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Electronics Design experience High Speed Digital Design High speed digital design interfaces: USB3, MIPI, PCI express, Gigabit Ethernet, DDRX memory High Speed PCB layout and design constraints definition Experience with simulation tools (eg Hyperlynx, Sigrity, ADS,) Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
Mar 22, 2024
Contractor
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
Ultra Intelligence and Communications (Cyber)
Farnborough, Hampshire
Job Description In this role you will be based on site in Farnborough. Hours: 37.5 per week, flexi-time. We are searching for an experienced Test Engineer to lead the small team of engineers with the view to shape and change the expanding team as the business grows. Part of Ultra Intelligence & Communications, the EWST business unit is a specialist engineering company that designs and builds state of the art Electromagnetic environment simulators, using high speed digital and RF components controlled by real-time software. These systems are exported worldwide to support the development and use of complex systems operating within the electromagnetic spectrum. Working within the Engineering department the Systems Integration Engineer will be responsible for implementing the EWST system design process, including supporting the Chief System Engineer in producing design documentation (Design Specifications/ Test Procedures, etc.) and for configuring, commissioning and testing the simulators and their sub systems. The opportunity to travel internationally to work directly with customers may occur. Key Responsibilities: RF component, sub unit, unit and system testing, full system integration, including factory acceptance testing and site acceptance testing with customers will form a significant part of this role. Liaising with project managers, software and hardware design engineers to ensure good cross-departmental information flow and to ensure tasks and problems are identified and communicated effectively. Production of design, test and tasking documentation within DOORS/JAMA requirements management tool, based on the V-Model design process. Define integration test Plans within the integration department with program managers this contributing to SCRUM planning. Reporting on integration progress and issues to the wider business. Essential Skills: Ability to understand and communicate complex system concepts to other team members. Great fault-finding skills to solve technical problems under pressure. Ability to operate modern Oscilloscopes and Spectrum Analysers. Ability to operate Vector/Phase Network Analysers and Logic Analysers an advantage. Ability to read and interpret circuit diagrams and RF schematics. The ability triage system faults ensuring they are directed to the correct team for swift resolution within the company reporting tools. Ability to write good quality documentation within the company tool set, including a comprehensive understanding of requirements management and the V-Model process. Desirable Skills An appreciation of software and firmware approaches in complex systems Role Requirements Ability to obtain and maintain SC Clearance. Good communication skills both verbal and written. Strong self-management and organisation skills, with a high attention to detail. Experience Systems test engineering, design, and integration, particularly from a defence industry background. Good general knowledge in electronics hardware and real-time software development. Our Benefits Every employee is critical to our success, and as such, we offer a range of flexible employee benefits, including: Annual Bonus Performance Related 25 days holiday with the option to buy an extra 5 4 x Life Assurance Cover Flexible working hours Early Finish on a Friday Pension Contribution Our Ultra Select Benefits package includes subsidised gym & retail, childcare vouchers, cycle-to-work schemes, etc. Diversity, Equity & Inclusion Statement At Ultra I&C, we are an equal opportunity employer and value diversity and inclusivity. Underpinned by our values, behaviours, and policies, we want you to feel empowered to be the best version of yourself. We also believe that people from different backgrounds and cultures will increase our diversity of thinking, ensuring we successfully deliver to our customers. We, therefore, do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We also support requests for flexible working arrangements wherever possible.
Mar 21, 2024
Full time
Job Description In this role you will be based on site in Farnborough. Hours: 37.5 per week, flexi-time. We are searching for an experienced Test Engineer to lead the small team of engineers with the view to shape and change the expanding team as the business grows. Part of Ultra Intelligence & Communications, the EWST business unit is a specialist engineering company that designs and builds state of the art Electromagnetic environment simulators, using high speed digital and RF components controlled by real-time software. These systems are exported worldwide to support the development and use of complex systems operating within the electromagnetic spectrum. Working within the Engineering department the Systems Integration Engineer will be responsible for implementing the EWST system design process, including supporting the Chief System Engineer in producing design documentation (Design Specifications/ Test Procedures, etc.) and for configuring, commissioning and testing the simulators and their sub systems. The opportunity to travel internationally to work directly with customers may occur. Key Responsibilities: RF component, sub unit, unit and system testing, full system integration, including factory acceptance testing and site acceptance testing with customers will form a significant part of this role. Liaising with project managers, software and hardware design engineers to ensure good cross-departmental information flow and to ensure tasks and problems are identified and communicated effectively. Production of design, test and tasking documentation within DOORS/JAMA requirements management tool, based on the V-Model design process. Define integration test Plans within the integration department with program managers this contributing to SCRUM planning. Reporting on integration progress and issues to the wider business. Essential Skills: Ability to understand and communicate complex system concepts to other team members. Great fault-finding skills to solve technical problems under pressure. Ability to operate modern Oscilloscopes and Spectrum Analysers. Ability to operate Vector/Phase Network Analysers and Logic Analysers an advantage. Ability to read and interpret circuit diagrams and RF schematics. The ability triage system faults ensuring they are directed to the correct team for swift resolution within the company reporting tools. Ability to write good quality documentation within the company tool set, including a comprehensive understanding of requirements management and the V-Model process. Desirable Skills An appreciation of software and firmware approaches in complex systems Role Requirements Ability to obtain and maintain SC Clearance. Good communication skills both verbal and written. Strong self-management and organisation skills, with a high attention to detail. Experience Systems test engineering, design, and integration, particularly from a defence industry background. Good general knowledge in electronics hardware and real-time software development. Our Benefits Every employee is critical to our success, and as such, we offer a range of flexible employee benefits, including: Annual Bonus Performance Related 25 days holiday with the option to buy an extra 5 4 x Life Assurance Cover Flexible working hours Early Finish on a Friday Pension Contribution Our Ultra Select Benefits package includes subsidised gym & retail, childcare vouchers, cycle-to-work schemes, etc. Diversity, Equity & Inclusion Statement At Ultra I&C, we are an equal opportunity employer and value diversity and inclusivity. Underpinned by our values, behaviours, and policies, we want you to feel empowered to be the best version of yourself. We also believe that people from different backgrounds and cultures will increase our diversity of thinking, ensuring we successfully deliver to our customers. We, therefore, do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We also support requests for flexible working arrangements wherever possible.
Design Engineer Bedlington Competitive Salary Our client, a leader in their field are looking for a Design Engineer to join their busy Product Development team! Design Engineer Roles and Responsibilities: Design and develop product solutions that incorporate semiconductor devices Plan and incorporate the introduction of new products inline with NPI procedures Work through concept, design and development into the operational production phases Sustain and improve existing product lines through entire life cycle Support yield improvements, cost reductions and provide technical support Support semiconductor selection; Discrete, Hybrid or Power Module packaging; electrical; mechanical and thermal design; design for manufacture and high reliability application requirements Creation of manufacturing drawings and specifications Prepare reports with costing estimations to support NPI projects Ensure safe working practices, abiding by health and safety legislation Support the business strategic plans and on occasion support customers on site The ideal Design Engineer will: Have experience developing hybrid microelectronic assemblies Experience in both mechanical and electronics CAD design and thermal, mechanical and electrical simulations Knowledge of common semi-conductor devices (MOSFET, IGBT, Diodes, Bipolar Transistors etc.) and Silicon / SiC / GaN technologies and performance requirements Experience in Design of Experiments, 8D and data analysis A Degree or HND in an engineering discipline (Desirable) Demonstratable experience in the electronics industry (Desirable) Knowledge of Lean Manufacturing tools and statistical process techniques (Desirable) Familiarity with Mil standard and design (Desirable) Jackie Kerr Recruitment is an independent agency that has been established for 26 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidate's requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
Mar 21, 2024
Full time
Design Engineer Bedlington Competitive Salary Our client, a leader in their field are looking for a Design Engineer to join their busy Product Development team! Design Engineer Roles and Responsibilities: Design and develop product solutions that incorporate semiconductor devices Plan and incorporate the introduction of new products inline with NPI procedures Work through concept, design and development into the operational production phases Sustain and improve existing product lines through entire life cycle Support yield improvements, cost reductions and provide technical support Support semiconductor selection; Discrete, Hybrid or Power Module packaging; electrical; mechanical and thermal design; design for manufacture and high reliability application requirements Creation of manufacturing drawings and specifications Prepare reports with costing estimations to support NPI projects Ensure safe working practices, abiding by health and safety legislation Support the business strategic plans and on occasion support customers on site The ideal Design Engineer will: Have experience developing hybrid microelectronic assemblies Experience in both mechanical and electronics CAD design and thermal, mechanical and electrical simulations Knowledge of common semi-conductor devices (MOSFET, IGBT, Diodes, Bipolar Transistors etc.) and Silicon / SiC / GaN technologies and performance requirements Experience in Design of Experiments, 8D and data analysis A Degree or HND in an engineering discipline (Desirable) Demonstratable experience in the electronics industry (Desirable) Knowledge of Lean Manufacturing tools and statistical process techniques (Desirable) Familiarity with Mil standard and design (Desirable) Jackie Kerr Recruitment is an independent agency that has been established for 26 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidate's requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
Raytheon UK is seeking a skilled and high-performing Electronics Design Engineer to join our successful Assured Position, Navigation, and Timing (APNT) team within the Global Sensors Mission Area. In this role, you'll contribute to the creation of Digital GPS Anti-Jam Systems for the military market. The position is based at Raytheon's Harlow facility, offering a hybrid working split, and the successful candidate will report directly to the APNT Digital Hardware Engineering Lead. Main Duties: As a Hardware/Firmware Engineer, you'll play a pivotal role in a dynamic team, making your mark on a broad range of product designs. You will be involved in the integration of these designs into products, serving as the focal point for the complete system. Your responsibilities will include: Schematic generation, PCB design, component selection, evaluation, and verification. Collaboration with system engineers on architectures of electronic subsystems. Development of requirements to ensure compliance with relevant standards. Collaboration with embedded software engineers and mechanical engineers. Generation of supporting design documentation and regular technical reviews. Candidate Requirements: Essential: Experience with embedded digital electronics and microprocessor systems. Experience working with FPGAs and SoC technologies. VHDL programming language for Xilinx or Microsemi FPGAs. Experience taking prototypes to production hardware. PCB design in conformance with defense engineering standards/airborne standards. Design experience for manufacture. Clear and concise presentation of technical information. Analytical and problem-solving skills. Openness to learn and adopt new techniques. Ability to adapt to a dynamic work environment, working independently or collaboratively. Analyzing and reporting on technical data. Eligible or holder of current SC security clearance. Desirable: Experience with the Xilinx chip family. Familiarity with a systems engineering approach across the design and development life cycle. Experience with Mentor Xpedition PCB design tool and SPICE. Experience creating DO254 compliant electronic systems. Working with Model Based System Engineering tools such as Simulink. APNT systems domain knowledge and/or experience in a similar field. Understanding of environmental requirements (shock, vibration, EMC, etc.) and experience applying and testing for these requirements. Join Our Team: If you are an experienced Electronics Design Engineer ready to contribute to cutting-edge technologies, apply now! Join Raytheon UK and be part of a team shaping the future of Digital GPS Anti-Jam Systems for military applications. Grow your career in a collaborative and innovative environment. Apply today and make an impact on global defense systems.
Mar 21, 2024
Full time
Raytheon UK is seeking a skilled and high-performing Electronics Design Engineer to join our successful Assured Position, Navigation, and Timing (APNT) team within the Global Sensors Mission Area. In this role, you'll contribute to the creation of Digital GPS Anti-Jam Systems for the military market. The position is based at Raytheon's Harlow facility, offering a hybrid working split, and the successful candidate will report directly to the APNT Digital Hardware Engineering Lead. Main Duties: As a Hardware/Firmware Engineer, you'll play a pivotal role in a dynamic team, making your mark on a broad range of product designs. You will be involved in the integration of these designs into products, serving as the focal point for the complete system. Your responsibilities will include: Schematic generation, PCB design, component selection, evaluation, and verification. Collaboration with system engineers on architectures of electronic subsystems. Development of requirements to ensure compliance with relevant standards. Collaboration with embedded software engineers and mechanical engineers. Generation of supporting design documentation and regular technical reviews. Candidate Requirements: Essential: Experience with embedded digital electronics and microprocessor systems. Experience working with FPGAs and SoC technologies. VHDL programming language for Xilinx or Microsemi FPGAs. Experience taking prototypes to production hardware. PCB design in conformance with defense engineering standards/airborne standards. Design experience for manufacture. Clear and concise presentation of technical information. Analytical and problem-solving skills. Openness to learn and adopt new techniques. Ability to adapt to a dynamic work environment, working independently or collaboratively. Analyzing and reporting on technical data. Eligible or holder of current SC security clearance. Desirable: Experience with the Xilinx chip family. Familiarity with a systems engineering approach across the design and development life cycle. Experience with Mentor Xpedition PCB design tool and SPICE. Experience creating DO254 compliant electronic systems. Working with Model Based System Engineering tools such as Simulink. APNT systems domain knowledge and/or experience in a similar field. Understanding of environmental requirements (shock, vibration, EMC, etc.) and experience applying and testing for these requirements. Join Our Team: If you are an experienced Electronics Design Engineer ready to contribute to cutting-edge technologies, apply now! Join Raytheon UK and be part of a team shaping the future of Digital GPS Anti-Jam Systems for military applications. Grow your career in a collaborative and innovative environment. Apply today and make an impact on global defense systems.