A specialist independent building services consultancy has, due to planned expansion, an immediate requirement for a high-end intermediate / senior level building services design engineer to join their design team in their Birmingham offices. hybrid remote working available. They work in a wide variety of project sectors including, general commercial, high-end residential, educational, health and MOD. As a mechanical design engineer you would be expected to provide effective designs, conduct surveys, prepare feasibility reports, specifications, provide site supervision and management of mechanical services installations. Your should ideally be qualified to a minimum of HND level and have a minimum of 2 years' UK building services design experience. Your should have a demonstrable UK building services background. Your responsibilities would include: Design calculations using industry leading software Assisting in preparing reports such as feasibility studies, design reports, specifications and contract administration. Maintaining an up to date knowledge of current standards and legislation. Attending site surveys and client meetings. Implementing technical standards and supporting the business development. Compliance with CDM Regulations must be ensured. Undertaking detailed site surveys and design reviews. Understanding of engineering systems and the ability to report on both mechanical and electrical disciplines during meetings is essential. You would need an appreciation of contract administration, project management and site supervision/inspections and assist with the financial control of project(s) liaising with Project Director. Mentoring and assisting the graduate engineers. Skills and Experience Prefarbly have some Revit MEP experience. Some experience of IES modelling software would be advantageous (but not essential). Ideally some understanding of BIM Level 2 and BIM project deliverables structure. Training will be provided if required Undertaking mechanical designs from inception to completion, sometimes within tight deadlines whilst maintaining accuracy and quality. CEng qualified or working towards CEng. Appropriate membership of professional body, i.e. CIBSE, IMECHE, IET Full UK driving license
Mar 28, 2024
Full time
A specialist independent building services consultancy has, due to planned expansion, an immediate requirement for a high-end intermediate / senior level building services design engineer to join their design team in their Birmingham offices. hybrid remote working available. They work in a wide variety of project sectors including, general commercial, high-end residential, educational, health and MOD. As a mechanical design engineer you would be expected to provide effective designs, conduct surveys, prepare feasibility reports, specifications, provide site supervision and management of mechanical services installations. Your should ideally be qualified to a minimum of HND level and have a minimum of 2 years' UK building services design experience. Your should have a demonstrable UK building services background. Your responsibilities would include: Design calculations using industry leading software Assisting in preparing reports such as feasibility studies, design reports, specifications and contract administration. Maintaining an up to date knowledge of current standards and legislation. Attending site surveys and client meetings. Implementing technical standards and supporting the business development. Compliance with CDM Regulations must be ensured. Undertaking detailed site surveys and design reviews. Understanding of engineering systems and the ability to report on both mechanical and electrical disciplines during meetings is essential. You would need an appreciation of contract administration, project management and site supervision/inspections and assist with the financial control of project(s) liaising with Project Director. Mentoring and assisting the graduate engineers. Skills and Experience Prefarbly have some Revit MEP experience. Some experience of IES modelling software would be advantageous (but not essential). Ideally some understanding of BIM Level 2 and BIM project deliverables structure. Training will be provided if required Undertaking mechanical designs from inception to completion, sometimes within tight deadlines whilst maintaining accuracy and quality. CEng qualified or working towards CEng. Appropriate membership of professional body, i.e. CIBSE, IMECHE, IET Full UK driving license
Part Time Project Accountant (12-month FTC) 25 hours per week Derby & London (remote working) Up to £55,000 + benefits (Full time equivalent) Our client is a manufacturing SME who are rapidly growing and looking to double their turnover as part of their 3 - 5-year strategic plan. Their CFO and number two in finance have identified the need to recruit a new person who is looking to apply their project accounting skillset in a growing business, by contributing to business processes, enhancing business intelligence, influence decision making and change. Duties: Monthly project reporting and quarterly forecasting for a million plus grant-funded project; strictly monitoring expenditure versus budget; assisting in quarterly submission to UK Research and Innovation; dealing with finance queries from UKRI; ensuring a successful grant claim in the month after quarter-end Establishing an effective working relationship with the Project Management team; advising the team on what's allowed expenditure according to the UKRI rules; assisting in project setup and maintenance in SAP Business ByDesign Developing detailed knowledge of SAP Business ByDesign and using SAP BYD to post journals, track timesheet and purchasing orders, view and download reports, working on Capex projects, asset under construction and fixed asset Tracking project cash flow and incorporating cash outflow in the quarterly grant claim Supporting the financial reporting and analysis of our China legal entity when required Potential to develop responsibilities in other projects or cost centres To be successful: You will be a qualified accountant or studying towards a finance qualification Possess a proven ability in taking ownership of various projects An ability to challenge and 'push-back' to engineering/ production managers and experience in maintaining and delivering accurate reports to key stakeholders Be an intelligent, proactive individual who is proactive, has a 'can do' attitude Have excellent Excel skills are critical, as well as a generally good experience using other ERP/ Finance Systems Have experience of working in the UK
Mar 28, 2024
Full time
Part Time Project Accountant (12-month FTC) 25 hours per week Derby & London (remote working) Up to £55,000 + benefits (Full time equivalent) Our client is a manufacturing SME who are rapidly growing and looking to double their turnover as part of their 3 - 5-year strategic plan. Their CFO and number two in finance have identified the need to recruit a new person who is looking to apply their project accounting skillset in a growing business, by contributing to business processes, enhancing business intelligence, influence decision making and change. Duties: Monthly project reporting and quarterly forecasting for a million plus grant-funded project; strictly monitoring expenditure versus budget; assisting in quarterly submission to UK Research and Innovation; dealing with finance queries from UKRI; ensuring a successful grant claim in the month after quarter-end Establishing an effective working relationship with the Project Management team; advising the team on what's allowed expenditure according to the UKRI rules; assisting in project setup and maintenance in SAP Business ByDesign Developing detailed knowledge of SAP Business ByDesign and using SAP BYD to post journals, track timesheet and purchasing orders, view and download reports, working on Capex projects, asset under construction and fixed asset Tracking project cash flow and incorporating cash outflow in the quarterly grant claim Supporting the financial reporting and analysis of our China legal entity when required Potential to develop responsibilities in other projects or cost centres To be successful: You will be a qualified accountant or studying towards a finance qualification Possess a proven ability in taking ownership of various projects An ability to challenge and 'push-back' to engineering/ production managers and experience in maintaining and delivering accurate reports to key stakeholders Be an intelligent, proactive individual who is proactive, has a 'can do' attitude Have excellent Excel skills are critical, as well as a generally good experience using other ERP/ Finance Systems Have experience of working in the UK
We have a fantastic opportunity that has become available for an IT Helpdesk Technician to join the team at a growing business based in Haslingden. This organisation has a great working environment where its very much a team effort and culture, they offer remote working to promote a good work life balance for their staff and encourage a proactive approach to your own personal development as there is lots of opportunity for career prospects within this fantastic organisation! As an IT Helpdesk Technician you will assisting with the day to day management of the IT systems providing vital 1st line customer support and helpdesk services to users. We are seeking applicants with proven experience working in a customer support environment as a technician raising tickets and testing issues trying to get them resolved. Offering a competitive salary, remote working with flexibility to attend the office when required, Monday to Friday working 9am to 5pm, free onsite parking, social events and a fantastic team spirit where everyone supports each other. What will you be doing as an IT Helpdesk Technician? Be the 1st line helpdesk support to customers assisting with issues they report with their system Offering excellent customer service demonstrating a friendly and helpful approach as the first point of contact Providing the helpdesk services via phone and also web based chat Identifying issues reported and raising tickets to the relevant engineers for resolution Logging of issues accurately on the inhouse bespoke database Liasing with the infrastructure manager and the head of technical services Assisting with product testing and providing feedback Get involved with other areas such as support site visits and administration tasks Work closely with the development team in Holland Develop great relationships with internal and external stakeholders What skills and experience will you need as an IT Helpdesk Technician? You have experience working in IT Helpdesk or Customer Technical Support positions Your confidant testing the systems of the service users to help with support issues Have a friendly and approachable personality with excellent customer service skills Proficient working on various CRM databases and can pick systems up quickly Your able to manage your own workload effectively with minimal supervision Whats in it for you as an IT Helpdesk Technician? Competitive salary Remote working with the opportunity to attend the offices when required Full time hours working Monday to Friday 9am to 5pm Social Events Be part of a successful and growing organisations Personal development and career prospects Free on site parking 25 days plus bank holidays Gorgeous modern offices Amazing team environment and culture Discounted shopping options To Apply , If this sounds like a role you will LOVE, please send your CV today We aim to respond to all successful applications within 2 days. If you haven't been contacted within 2 days your application has been unsuccessful. Please check our Website and apply directly for any other suitable positions you see. We apologise that we are unable to contact everyone in person and thank you for your interest. Are you on Facebook? Consider following our Facebook page as this is the first place where we post the most up to date vacancies, along with CV tips, interview techniques and so much more. Check us out on Facebook. Jobwise Ltd is an employment agency and the details sent in your application may be stored on our secure database. We will not share your personal data without your consent. Our privacy policy can be found on our Website.
Mar 28, 2024
Full time
We have a fantastic opportunity that has become available for an IT Helpdesk Technician to join the team at a growing business based in Haslingden. This organisation has a great working environment where its very much a team effort and culture, they offer remote working to promote a good work life balance for their staff and encourage a proactive approach to your own personal development as there is lots of opportunity for career prospects within this fantastic organisation! As an IT Helpdesk Technician you will assisting with the day to day management of the IT systems providing vital 1st line customer support and helpdesk services to users. We are seeking applicants with proven experience working in a customer support environment as a technician raising tickets and testing issues trying to get them resolved. Offering a competitive salary, remote working with flexibility to attend the office when required, Monday to Friday working 9am to 5pm, free onsite parking, social events and a fantastic team spirit where everyone supports each other. What will you be doing as an IT Helpdesk Technician? Be the 1st line helpdesk support to customers assisting with issues they report with their system Offering excellent customer service demonstrating a friendly and helpful approach as the first point of contact Providing the helpdesk services via phone and also web based chat Identifying issues reported and raising tickets to the relevant engineers for resolution Logging of issues accurately on the inhouse bespoke database Liasing with the infrastructure manager and the head of technical services Assisting with product testing and providing feedback Get involved with other areas such as support site visits and administration tasks Work closely with the development team in Holland Develop great relationships with internal and external stakeholders What skills and experience will you need as an IT Helpdesk Technician? You have experience working in IT Helpdesk or Customer Technical Support positions Your confidant testing the systems of the service users to help with support issues Have a friendly and approachable personality with excellent customer service skills Proficient working on various CRM databases and can pick systems up quickly Your able to manage your own workload effectively with minimal supervision Whats in it for you as an IT Helpdesk Technician? Competitive salary Remote working with the opportunity to attend the offices when required Full time hours working Monday to Friday 9am to 5pm Social Events Be part of a successful and growing organisations Personal development and career prospects Free on site parking 25 days plus bank holidays Gorgeous modern offices Amazing team environment and culture Discounted shopping options To Apply , If this sounds like a role you will LOVE, please send your CV today We aim to respond to all successful applications within 2 days. If you haven't been contacted within 2 days your application has been unsuccessful. Please check our Website and apply directly for any other suitable positions you see. We apologise that we are unable to contact everyone in person and thank you for your interest. Are you on Facebook? Consider following our Facebook page as this is the first place where we post the most up to date vacancies, along with CV tips, interview techniques and so much more. Check us out on Facebook. Jobwise Ltd is an employment agency and the details sent in your application may be stored on our secure database. We will not share your personal data without your consent. Our privacy policy can be found on our Website.
Role: Electronics Engineer (PERM Role) Location: Chertsey, Surrey, KT16 9JX Salary: 50 K - 65 K + Benefits Job Purpose: We are delighted to be growing our electronics opportunities with this new role of Electronics Engineer. In this role, you will collaborate with and learn from a small team of highly-skilled design engineers, contributing to the delivery of high-quality products and systems for the defence industry, specifically at the very start of our Maritime Communications business stream. To be successful in the role we are looking for you to have experience in translating system requirements into innovative electronic design solutions. Your role will be instrumental in ensuring successful customer acceptance within specified project timelines and budgets. Candidate Requirements: Responsible for the architectural and detailed design of electronics solutions to meet requirements. Work with other internal design disciplines, and external suppliers, to develop successful design solutions. Consideration of design for manufacture and test, to ensure smooth transition to production. Systems integration of solutions, including fault finding. Work with external test houses to demonstrate equipment complies with MoD and European standards, including CE/UKCA marking. Comply with all health and safety requirements and safe practices and procedures operated by the company. Prepare high-quality documentation and drawings associated with the development lifecycle (e.g.,) Bill of Materials, schematics and Change Notes), and configuration in accordance with company procedures. Assist and liaise with project teams on electronic aspects of products and systems. Occasional offsite support to install and maintain products and systems. Skills and Qualifications: Broad electronics design experience in both Analogue and digital design techniques including: Power Supply Design Design for EMC Compliance Working knowledge of ECAD tools for circuit & PCB design (Cadence OrCAD desirable). Ability to multi-task and prioritise workload with a hands-on approach. Problem-solving and fault-finding down to component level. Able to work with internal and external stakeholders to develop solutions.
Mar 28, 2024
Full time
Role: Electronics Engineer (PERM Role) Location: Chertsey, Surrey, KT16 9JX Salary: 50 K - 65 K + Benefits Job Purpose: We are delighted to be growing our electronics opportunities with this new role of Electronics Engineer. In this role, you will collaborate with and learn from a small team of highly-skilled design engineers, contributing to the delivery of high-quality products and systems for the defence industry, specifically at the very start of our Maritime Communications business stream. To be successful in the role we are looking for you to have experience in translating system requirements into innovative electronic design solutions. Your role will be instrumental in ensuring successful customer acceptance within specified project timelines and budgets. Candidate Requirements: Responsible for the architectural and detailed design of electronics solutions to meet requirements. Work with other internal design disciplines, and external suppliers, to develop successful design solutions. Consideration of design for manufacture and test, to ensure smooth transition to production. Systems integration of solutions, including fault finding. Work with external test houses to demonstrate equipment complies with MoD and European standards, including CE/UKCA marking. Comply with all health and safety requirements and safe practices and procedures operated by the company. Prepare high-quality documentation and drawings associated with the development lifecycle (e.g.,) Bill of Materials, schematics and Change Notes), and configuration in accordance with company procedures. Assist and liaise with project teams on electronic aspects of products and systems. Occasional offsite support to install and maintain products and systems. Skills and Qualifications: Broad electronics design experience in both Analogue and digital design techniques including: Power Supply Design Design for EMC Compliance Working knowledge of ECAD tools for circuit & PCB design (Cadence OrCAD desirable). Ability to multi-task and prioritise workload with a hands-on approach. Problem-solving and fault-finding down to component level. Able to work with internal and external stakeholders to develop solutions.
Position: Maintenance Technician (Shift) Location: Herefordshire Salary: £34,000 to £45,000 + Excellent Benefits (OTE £50,000) If there s something stopping you from achieving all you re capable of, you ll relish a role with a company that will positively encourage you to be pro-active a real opportunity to release your true potential. Our Client, an experienced forward-thinking global manufacturer working within Injection Moulding whose focus is to provide world class customer service, delivering excellence in everything they do, and they recognize that it is their people who make the difference. Due to sustained continued expansion they require a Maintenance Technician to perform the day to day maintenance of plant and equipment, to include moulding and assembly machinery, to ensure continuity of Production, consistent with the Company s goals and needs. Key Responsibilities include (but are not limited to): Diagnose and repair electrical/mechanical faults that occur on plant and/or equipment Assist with the maintenance programme for all plant and/or equipment (hydraulics, robots, ancillary machines automatic assembly) Ensure all items of plant and/or equipment is in good safe working order We anticipate that you will have: City & Guilds (or equivalent) Levels 1, 2 & 3 in Electrical / Mechanical Engineering (or similar) or be a Time-Served Engineer with relevant experience Knowledge of PLCs and Control Systems You will be self-motivated, have excellent communication skills both written and oral, be computer literate, and able to work as part of a team. The successful candidate will enjoy a good salary of between £34,000 to £45,000 (dependent upon experience) plus excellent prospects and an employment package that you would expect from a company that values its employees. Do you have the courage to take on this challenge?
Mar 28, 2024
Full time
Position: Maintenance Technician (Shift) Location: Herefordshire Salary: £34,000 to £45,000 + Excellent Benefits (OTE £50,000) If there s something stopping you from achieving all you re capable of, you ll relish a role with a company that will positively encourage you to be pro-active a real opportunity to release your true potential. Our Client, an experienced forward-thinking global manufacturer working within Injection Moulding whose focus is to provide world class customer service, delivering excellence in everything they do, and they recognize that it is their people who make the difference. Due to sustained continued expansion they require a Maintenance Technician to perform the day to day maintenance of plant and equipment, to include moulding and assembly machinery, to ensure continuity of Production, consistent with the Company s goals and needs. Key Responsibilities include (but are not limited to): Diagnose and repair electrical/mechanical faults that occur on plant and/or equipment Assist with the maintenance programme for all plant and/or equipment (hydraulics, robots, ancillary machines automatic assembly) Ensure all items of plant and/or equipment is in good safe working order We anticipate that you will have: City & Guilds (or equivalent) Levels 1, 2 & 3 in Electrical / Mechanical Engineering (or similar) or be a Time-Served Engineer with relevant experience Knowledge of PLCs and Control Systems You will be self-motivated, have excellent communication skills both written and oral, be computer literate, and able to work as part of a team. The successful candidate will enjoy a good salary of between £34,000 to £45,000 (dependent upon experience) plus excellent prospects and an employment package that you would expect from a company that values its employees. Do you have the courage to take on this challenge?
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology, working as part of the Aviva family? Responsibilities The Role: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damage and refit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience; Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing, minor panel repairs. Preparation and priming of a new / repaired panel to first masking stage Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus and what can they do for you? Solus is one of the largest body repair groups in the country, employing over 900 expert people across 25 UK locations and have repaired over 700,000 vehicles in the last 15 years. A competitive bonus scheme Group income protection with access to a GP and medical advice 24 hours per day for yourself and your family Our excellent benefits and rewards packages Competitive employer matched pension contributions Discounts on Aviva products and services Savings and benefits schemes Discounts and schemes for electric vehicle purchase for all employees Holding several main manufacturer approvals - Jaguar, Land Rover, Mercedes Benz, BMW, Mini, and Volkswagen Well known for prestigious award winning in the industry, customer service, apprenticeships, and IT systems fields Links with Thatcham to get the best products and training here in the UK We have a variety of locations, hours and working patterns to suit our customers, business, and you. We interview every disabled applicant who meets the minimum criteria for the job. Excited but not sure you tick every box? We are inclusive - we want applications from people with diverse backgrounds and experiences. We are looking for individuals who can grow and support our business and we expect to do the same for you. We recognise that we can only achieve our vision with the dedication and collaboration of our specialists. This is an excellent time to join a rapidly growing business and help us to shape the future. What next? Please apply online and our recruitment team will be in contact within 7 days You may have experience of the following: Body Repairs, Mechanic, Panel Beater, Repairs, Bodyshop, Vehicle Mechanic, Bodyshop Vehicle Technician, Automotive Mechanic, and Vehicle Technician.
Mar 28, 2024
Full time
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology, working as part of the Aviva family? Responsibilities The Role: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damage and refit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience; Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing, minor panel repairs. Preparation and priming of a new / repaired panel to first masking stage Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus and what can they do for you? Solus is one of the largest body repair groups in the country, employing over 900 expert people across 25 UK locations and have repaired over 700,000 vehicles in the last 15 years. A competitive bonus scheme Group income protection with access to a GP and medical advice 24 hours per day for yourself and your family Our excellent benefits and rewards packages Competitive employer matched pension contributions Discounts on Aviva products and services Savings and benefits schemes Discounts and schemes for electric vehicle purchase for all employees Holding several main manufacturer approvals - Jaguar, Land Rover, Mercedes Benz, BMW, Mini, and Volkswagen Well known for prestigious award winning in the industry, customer service, apprenticeships, and IT systems fields Links with Thatcham to get the best products and training here in the UK We have a variety of locations, hours and working patterns to suit our customers, business, and you. We interview every disabled applicant who meets the minimum criteria for the job. Excited but not sure you tick every box? We are inclusive - we want applications from people with diverse backgrounds and experiences. We are looking for individuals who can grow and support our business and we expect to do the same for you. We recognise that we can only achieve our vision with the dedication and collaboration of our specialists. This is an excellent time to join a rapidly growing business and help us to shape the future. What next? Please apply online and our recruitment team will be in contact within 7 days You may have experience of the following: Body Repairs, Mechanic, Panel Beater, Repairs, Bodyshop, Vehicle Mechanic, Bodyshop Vehicle Technician, Automotive Mechanic, and Vehicle Technician.
RF Design Engineer JOB LOCATION: Stevenage SECURITY CLEARANCE LEVEL - BPSS / SC Before Starting DURATION: 6-12 Months Minimum WORK PATTERN: 3 days a week onsite, 2 from home RATE: 50 - 55 Per hr on Umbrella (Inside IR35) Role: This role is to work on a new seeker with a fast paced programme within a dynamic team to develop high speed circuits. This requires an engineer with broad skills in mixed-signal electronic design with an appreciation of radar systems and also good understanding of programmable devices (FPGAs/CPLDs). The engineer must have a high degree of enthusiasm and a determination to deliver products to the right standard within the required timescales.
Mar 28, 2024
Contractor
RF Design Engineer JOB LOCATION: Stevenage SECURITY CLEARANCE LEVEL - BPSS / SC Before Starting DURATION: 6-12 Months Minimum WORK PATTERN: 3 days a week onsite, 2 from home RATE: 50 - 55 Per hr on Umbrella (Inside IR35) Role: This role is to work on a new seeker with a fast paced programme within a dynamic team to develop high speed circuits. This requires an engineer with broad skills in mixed-signal electronic design with an appreciation of radar systems and also good understanding of programmable devices (FPGAs/CPLDs). The engineer must have a high degree of enthusiasm and a determination to deliver products to the right standard within the required timescales.
We are currently working with one of the Midlands leading utility companies who have recently secured substantial contracts throughout the region. The Streetwork Coordinator position offers excellent career growth potential with a forward-thinking progressive business along with hybrid working. Salary to £28k Stakeholder Pension Life Assurance Annual Bonus 25 Days Holiday + Bank Holidays Key Essentials: You will be responsible for working on streetwork operations for a range of contracts Management and administration of permitting. This will involve the monitoring and coordination of streetwork activities Working closely with local authorities, you will be responsible for opening and closing permits using streetwork systems whilst ensuring that all aspects of the TMA (Traffic Management Act) are met Regularly liaising with local authorities; helping to build lasting relationships Requirements: Experienced in the use of Streetwork permitting systems including StreetManager Good knowledge of the New Roads and Streetworks (NRSWA) and Traffic Management Act (TMA) Proficient in Microsoft packages and be a good communicator By applying for this position, you are agreeing for CVL:LDN to hold and process your personal data in accordance with our Privacy Policy. Your data will be shared with clients relevant to any roles that you have applied for with us. If at any time you wish to withdraw your consent, then please contact us.
Mar 28, 2024
Full time
We are currently working with one of the Midlands leading utility companies who have recently secured substantial contracts throughout the region. The Streetwork Coordinator position offers excellent career growth potential with a forward-thinking progressive business along with hybrid working. Salary to £28k Stakeholder Pension Life Assurance Annual Bonus 25 Days Holiday + Bank Holidays Key Essentials: You will be responsible for working on streetwork operations for a range of contracts Management and administration of permitting. This will involve the monitoring and coordination of streetwork activities Working closely with local authorities, you will be responsible for opening and closing permits using streetwork systems whilst ensuring that all aspects of the TMA (Traffic Management Act) are met Regularly liaising with local authorities; helping to build lasting relationships Requirements: Experienced in the use of Streetwork permitting systems including StreetManager Good knowledge of the New Roads and Streetworks (NRSWA) and Traffic Management Act (TMA) Proficient in Microsoft packages and be a good communicator By applying for this position, you are agreeing for CVL:LDN to hold and process your personal data in accordance with our Privacy Policy. Your data will be shared with clients relevant to any roles that you have applied for with us. If at any time you wish to withdraw your consent, then please contact us.
As a Fire & Security Service Engineer, you will play a crucial role in our service delivery business. We are looking for individuals who: Have a minimum of 2 years in a similar role Hold a CSCS/ECS card, preferably with FIA and security qualifications Are experienced with Fire detection, Security systems, and auxiliary equipment Can work with Fire notifiers, mainly open protocol systems (optional) Possess skills in Intruder-Galaxy, Texacom, Scantronic, and Access Control-Paxton Conduct remedial works, including changing smoke heads and batteries, and addressing issues from servicing Perform maintenance and fault-finding work Have experience working on retail and commercial premises Are willing and available for out-of-hours callouts Work a day shift from Monday to Friday
Mar 28, 2024
Full time
As a Fire & Security Service Engineer, you will play a crucial role in our service delivery business. We are looking for individuals who: Have a minimum of 2 years in a similar role Hold a CSCS/ECS card, preferably with FIA and security qualifications Are experienced with Fire detection, Security systems, and auxiliary equipment Can work with Fire notifiers, mainly open protocol systems (optional) Possess skills in Intruder-Galaxy, Texacom, Scantronic, and Access Control-Paxton Conduct remedial works, including changing smoke heads and batteries, and addressing issues from servicing Perform maintenance and fault-finding work Have experience working on retail and commercial premises Are willing and available for out-of-hours callouts Work a day shift from Monday to Friday
Introduction Our client, a leading company in the energy sector, is currently seeking a skilled CAD Technician to join their team. As a CAD Technician, you will play a crucial role in producing accurate and detailed technical drawings and plans based on designs provided by the Preconstructions Teams and designers. Key Responsibilities Produce as-constructed plans to client specification Carry out relevant site visits to establish current information enabling timely submission of as-constructed plans Create high-quality detailed technical drawings and plans based on designs supplied Complete modifications to existing drawings Survey and record civils and cable information Assist Site Engineers in collating information recorded on site Assist in analyzing survey data and editing in required formats Ensure compliance with all company controlled documents and procedures Proactively help to develop new systems to meet changing departmental needs Develop good working relationships and maintain close liaison with clients Maintain a high standard of quality work Job Requirements SSE / DNO Experience (Preferred) Understanding of SSE Drawing practices from LV up to 132kV Understanding the purpose and use of GPS/EDM surveying equipment Knowledge of engineering principles and ability to create and read technical drawings Ability to analyze problems and offer solutions Resourcefulness and ability to work under pressure Prioritization and responsibility skills Good communication skills Able to work independently and as part of a team Methodical in working practices Ability to provide support to the tendering and estimating functions Extensive technical knowledge Full UK driving licence Desirable Attributes Ability to motivate people to reach common goals Well presented when dealing with clients Good negotiator Good team player Education Holder of a relevant professional or vocational qualification. General Attributes Able to commit to the concept that Health, Safety, and Environment are the number one priority for the Organization Able to commit to the concept of Equal Opportunity in employment If you have the skills and experience required for this role, we encourage you to apply now and join our client's dynamic team.
Mar 28, 2024
Full time
Introduction Our client, a leading company in the energy sector, is currently seeking a skilled CAD Technician to join their team. As a CAD Technician, you will play a crucial role in producing accurate and detailed technical drawings and plans based on designs provided by the Preconstructions Teams and designers. Key Responsibilities Produce as-constructed plans to client specification Carry out relevant site visits to establish current information enabling timely submission of as-constructed plans Create high-quality detailed technical drawings and plans based on designs supplied Complete modifications to existing drawings Survey and record civils and cable information Assist Site Engineers in collating information recorded on site Assist in analyzing survey data and editing in required formats Ensure compliance with all company controlled documents and procedures Proactively help to develop new systems to meet changing departmental needs Develop good working relationships and maintain close liaison with clients Maintain a high standard of quality work Job Requirements SSE / DNO Experience (Preferred) Understanding of SSE Drawing practices from LV up to 132kV Understanding the purpose and use of GPS/EDM surveying equipment Knowledge of engineering principles and ability to create and read technical drawings Ability to analyze problems and offer solutions Resourcefulness and ability to work under pressure Prioritization and responsibility skills Good communication skills Able to work independently and as part of a team Methodical in working practices Ability to provide support to the tendering and estimating functions Extensive technical knowledge Full UK driving licence Desirable Attributes Ability to motivate people to reach common goals Well presented when dealing with clients Good negotiator Good team player Education Holder of a relevant professional or vocational qualification. General Attributes Able to commit to the concept that Health, Safety, and Environment are the number one priority for the Organization Able to commit to the concept of Equal Opportunity in employment If you have the skills and experience required for this role, we encourage you to apply now and join our client's dynamic team.
ARE YOU SEEKING A COMMERCIAL HEATING MAINTENANCE ROLE IN BRISTOL, WORKING FOR A GLOBAL FM PROVIDER? WOULD YOU LIKE TO JOIN AN ESTABLISHED TEAM DELIVERING A WIDE RANGE OF BUILDING SERVICES SOLUTIONS TO A STATIC SITE? Then please get in touch! THE COMPANY Our Client is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally, we employ over 70,000 employees and operate in 48 countries. THE OPPORTUNITY We are looking for a Combustion Engineer qualified to ACS Commercial levels to carry out planned preventative maintenance and reactive works to client Systems in accordance with agreed service levels Ensuring the organisation is running as well as it possibly can, with a smooth efficient service that meets the expectations and needs of the business and customer. Candidates must have a full UK driving licence, be Gas Safe Registered with a minimum of 5 years experience with extensive experience servicing, maintaining and fault finding on a wide range of gas equipment in commercial properties. The ideal candidate will hold both commercial and domestic gas qualifications supported with the following: The successful candidate will be able to demonstrate at least 2 years experience of working with the Building Services and Facilities Management arena carrying out planned and reactive maintenance to a wide range of HVAC Plant and associated equipment. Annual salary up to £46,000 plus pension, specialist tools. Split Shift Work: 1 Week - 06:00hrs - 14:30hrs 1 Week - 11:30hrs - 20:00hrs KEY REQUIREMENTS NVQ or City & Guilds in one of the following: HVAC / AC / Gas / Plumbing / Mechanical Must hold Commercial ACS Hold a minimum of 2+ years experience in a building maintenance role, particularly in relation to planned, reactive and remedial maintenance. Current Full UK Driver s License Registered CSCS/CSR Card or equivalent skill card
Mar 28, 2024
Full time
ARE YOU SEEKING A COMMERCIAL HEATING MAINTENANCE ROLE IN BRISTOL, WORKING FOR A GLOBAL FM PROVIDER? WOULD YOU LIKE TO JOIN AN ESTABLISHED TEAM DELIVERING A WIDE RANGE OF BUILDING SERVICES SOLUTIONS TO A STATIC SITE? Then please get in touch! THE COMPANY Our Client is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally, we employ over 70,000 employees and operate in 48 countries. THE OPPORTUNITY We are looking for a Combustion Engineer qualified to ACS Commercial levels to carry out planned preventative maintenance and reactive works to client Systems in accordance with agreed service levels Ensuring the organisation is running as well as it possibly can, with a smooth efficient service that meets the expectations and needs of the business and customer. Candidates must have a full UK driving licence, be Gas Safe Registered with a minimum of 5 years experience with extensive experience servicing, maintaining and fault finding on a wide range of gas equipment in commercial properties. The ideal candidate will hold both commercial and domestic gas qualifications supported with the following: The successful candidate will be able to demonstrate at least 2 years experience of working with the Building Services and Facilities Management arena carrying out planned and reactive maintenance to a wide range of HVAC Plant and associated equipment. Annual salary up to £46,000 plus pension, specialist tools. Split Shift Work: 1 Week - 06:00hrs - 14:30hrs 1 Week - 11:30hrs - 20:00hrs KEY REQUIREMENTS NVQ or City & Guilds in one of the following: HVAC / AC / Gas / Plumbing / Mechanical Must hold Commercial ACS Hold a minimum of 2+ years experience in a building maintenance role, particularly in relation to planned, reactive and remedial maintenance. Current Full UK Driver s License Registered CSCS/CSR Card or equivalent skill card
ARE YOU AN EXPERIENCED, QUALIFIED BUILDING SERVICES MAINTENANCE ENGINEER BASED IN BRISTOL? IF SO, WE WANT YOU. WE ARE SEEKING AN ENGINEER TO JOIN OUR CLIENT TO HELP CREATE A HASSLE FREE ENVIRONMENT FOR OUR CLIENTS AND ENGINEERS. IF YOU WISH TO JOIN AN ORGANISATION THAT OFFERS FLEXIBILITY AND TRAINING Then please get in touch! THE COMPANY Our wide knowledge base of managing different types of properties means that our teams of multi-skilled engineers have the experience to deliver safe, innovative and efficient maintenance solutions. We are always happy to adapt our hard facilities management services to your business requirements, whether these revolve around short term reactive fixing (such as replacing lighting or repairing interiors) or mechanical and electrical planned preventatives. THE OPPORTUNITY The successful candidate will provide completion of pre-planned maintenance to mechanical & electrical plant and building fabric systems including but not limited to emergency lighting, ahu s, fcu s etc, as well as undertaking a range of installation and completion tasks including but not limited to single and three phase low voltage distribution cabling and equipment, steel & PVC trunking/tray/conduit containment, final circuit cabling, second fix final termination of wiring accessories, data networking, HVCA controls, fault finding. You will be working in a mobile capacity across the Greater Bristol area visiting various sites, including Commercial Premises, Public Sector Sites and Retail. Annual salary up to £42,000 plus pension, 33 days annual leave, life assurance, discounted Private Health Care and more KEY REQUIREMENTS NVQ or City & Guilds, Technical Qualificaiton Hold a minimum of 3+ years experience in a building maintenance role, particularly in relation to planned, reactive and remedial maintenance. Current Full UK Driver s License
Mar 28, 2024
Full time
ARE YOU AN EXPERIENCED, QUALIFIED BUILDING SERVICES MAINTENANCE ENGINEER BASED IN BRISTOL? IF SO, WE WANT YOU. WE ARE SEEKING AN ENGINEER TO JOIN OUR CLIENT TO HELP CREATE A HASSLE FREE ENVIRONMENT FOR OUR CLIENTS AND ENGINEERS. IF YOU WISH TO JOIN AN ORGANISATION THAT OFFERS FLEXIBILITY AND TRAINING Then please get in touch! THE COMPANY Our wide knowledge base of managing different types of properties means that our teams of multi-skilled engineers have the experience to deliver safe, innovative and efficient maintenance solutions. We are always happy to adapt our hard facilities management services to your business requirements, whether these revolve around short term reactive fixing (such as replacing lighting or repairing interiors) or mechanical and electrical planned preventatives. THE OPPORTUNITY The successful candidate will provide completion of pre-planned maintenance to mechanical & electrical plant and building fabric systems including but not limited to emergency lighting, ahu s, fcu s etc, as well as undertaking a range of installation and completion tasks including but not limited to single and three phase low voltage distribution cabling and equipment, steel & PVC trunking/tray/conduit containment, final circuit cabling, second fix final termination of wiring accessories, data networking, HVCA controls, fault finding. You will be working in a mobile capacity across the Greater Bristol area visiting various sites, including Commercial Premises, Public Sector Sites and Retail. Annual salary up to £42,000 plus pension, 33 days annual leave, life assurance, discounted Private Health Care and more KEY REQUIREMENTS NVQ or City & Guilds, Technical Qualificaiton Hold a minimum of 3+ years experience in a building maintenance role, particularly in relation to planned, reactive and remedial maintenance. Current Full UK Driver s License
Asset Information Specialist (Hybrid) The role is part of the PPP support to the Digital Asset Management (DAM) programme within Sellafield. The PPP support to DAM is an integrated project team with members from PPP and Sellafield s asset management capability. The DAM programme is a site wide delivery improvement programme supporting Sellafield s improvement requirements, the programme aims to address a number of issues with Sellafield s asset management arrangements with a targeted outcome of: An integrated information line of sight from the asset through to the enterprise that integrates activities across the asset lifecycle, removes the burden of paper-based work processes from our teams and engages everyone in the use of modern digital technologies to inform decision making Role Responsibilities of the Asset Information Specialist: Implementing the data & information architecture across available systems with a focus on the end user experience. Gaining the trust of existing information custodians to centralise and coordinate management of information. Defining field level data quality standards / data dictionary required for all information sets. Coordinating data quality improvement activities Supporting the documenting information management processes for centralised and decentralised solutions. Exploring new mechanisms of managing all types of information from wider industry practices including advanced digital and collaborative techniques. Supporting project and engineering teams define project information requirements. Providing dependable information to analytics teams. Building relationships with all business areas and bridging the gap between information providers, owners and consumers, the central IM&T department and the wider Delivery Capability. Asset Information Specialist Main duties include: Facilitating the Sellafield DAM Team deliver: A modern ISO19650 based information management solution in conjunction with process, application and IT teams that aligns with the client s objectives for a Digital Asset Management Transformation. Wide reaching maturity improvement projects aligned with the Asset Management Tubemap. Clear data quality expectations for the organisation to follow. Enacting Data Quality Improvement Plans Information improvement initiatives with information owners. Provide dependable data to inform analysis and insights Constructive information assurance activities to enable continuous improvement. CAD drawing and site modelling services through the CAD & Drawings team. Documentation management services through the Documentation team. Asset Register management services through the Asset Register team. Work with all parties to develop implementation plan(s) that incorporate all stages of the delivery lifecycle from requirements gathering to transition into service and beneficial use. Liaise with other areas of PPP and Sellafield to ensure other information related projects are aligned with timeframes and user requirements Specific: Detailed knowledge of implementing plans that support the Institute of Asset Management Anatomy Group 4 subjects 22 (Asset Information Strategy), 23 (Asset Information Standards), 24 (Asset Information Systems) and 25 (Data and Information Management). Information within the remit of the Information Specialist includes all Sellafield infrastructure asset information (graphical, structured and unstructured types across all workstreams on the Tube Map ). The role scope extends to support : BIM / information strategy, information architecture, management of information flows, control of information sharing, control of information publication processes. Experience, Skills and Knowledge of the Asset Information Specialist: Essential: A relevant HND or degree (Data Science / Information Management / Engineering). Experience delivering software and IT focused projects (especially hybrid cloud technologies). Expert knowledge in Information Management, common data environments and BIM on a large complex infrastructure programme. Ability to manage stakeholders. Hold or be capable of obtaining government clearance (SC/SL Nuclear). Hard FM knowledge and the population of data into CMMS / CAFM Desirable: Knowledge of working in Nuclear decommissioning Member of the Institute of Asset Managers Experience of Infrastructure Estate wide Asset Management Behaviours: Collaboration Proactivity Positive Communication Professionalism Listening Tenacity Striking a Balance Innovation Office location: Warrington / Cumbria, 2 / 3 days per week on site with travel to opposite site potentially once per month Full time position Term: Initial 12 month contract Rate: £550 per day (Limited) If you have the right skills / experience, and you are interested in the Asset Information Specialist role, please click the link to Apply
Mar 28, 2024
Contractor
Asset Information Specialist (Hybrid) The role is part of the PPP support to the Digital Asset Management (DAM) programme within Sellafield. The PPP support to DAM is an integrated project team with members from PPP and Sellafield s asset management capability. The DAM programme is a site wide delivery improvement programme supporting Sellafield s improvement requirements, the programme aims to address a number of issues with Sellafield s asset management arrangements with a targeted outcome of: An integrated information line of sight from the asset through to the enterprise that integrates activities across the asset lifecycle, removes the burden of paper-based work processes from our teams and engages everyone in the use of modern digital technologies to inform decision making Role Responsibilities of the Asset Information Specialist: Implementing the data & information architecture across available systems with a focus on the end user experience. Gaining the trust of existing information custodians to centralise and coordinate management of information. Defining field level data quality standards / data dictionary required for all information sets. Coordinating data quality improvement activities Supporting the documenting information management processes for centralised and decentralised solutions. Exploring new mechanisms of managing all types of information from wider industry practices including advanced digital and collaborative techniques. Supporting project and engineering teams define project information requirements. Providing dependable information to analytics teams. Building relationships with all business areas and bridging the gap between information providers, owners and consumers, the central IM&T department and the wider Delivery Capability. Asset Information Specialist Main duties include: Facilitating the Sellafield DAM Team deliver: A modern ISO19650 based information management solution in conjunction with process, application and IT teams that aligns with the client s objectives for a Digital Asset Management Transformation. Wide reaching maturity improvement projects aligned with the Asset Management Tubemap. Clear data quality expectations for the organisation to follow. Enacting Data Quality Improvement Plans Information improvement initiatives with information owners. Provide dependable data to inform analysis and insights Constructive information assurance activities to enable continuous improvement. CAD drawing and site modelling services through the CAD & Drawings team. Documentation management services through the Documentation team. Asset Register management services through the Asset Register team. Work with all parties to develop implementation plan(s) that incorporate all stages of the delivery lifecycle from requirements gathering to transition into service and beneficial use. Liaise with other areas of PPP and Sellafield to ensure other information related projects are aligned with timeframes and user requirements Specific: Detailed knowledge of implementing plans that support the Institute of Asset Management Anatomy Group 4 subjects 22 (Asset Information Strategy), 23 (Asset Information Standards), 24 (Asset Information Systems) and 25 (Data and Information Management). Information within the remit of the Information Specialist includes all Sellafield infrastructure asset information (graphical, structured and unstructured types across all workstreams on the Tube Map ). The role scope extends to support : BIM / information strategy, information architecture, management of information flows, control of information sharing, control of information publication processes. Experience, Skills and Knowledge of the Asset Information Specialist: Essential: A relevant HND or degree (Data Science / Information Management / Engineering). Experience delivering software and IT focused projects (especially hybrid cloud technologies). Expert knowledge in Information Management, common data environments and BIM on a large complex infrastructure programme. Ability to manage stakeholders. Hold or be capable of obtaining government clearance (SC/SL Nuclear). Hard FM knowledge and the population of data into CMMS / CAFM Desirable: Knowledge of working in Nuclear decommissioning Member of the Institute of Asset Managers Experience of Infrastructure Estate wide Asset Management Behaviours: Collaboration Proactivity Positive Communication Professionalism Listening Tenacity Striking a Balance Innovation Office location: Warrington / Cumbria, 2 / 3 days per week on site with travel to opposite site potentially once per month Full time position Term: Initial 12 month contract Rate: £550 per day (Limited) If you have the right skills / experience, and you are interested in the Asset Information Specialist role, please click the link to Apply
£45,000 - £65,000 (DOE) + Annual Bonus Scheme + Paid Overtime + Excellent Benefits Orion Automation are supporting a leading systems integration company on a newly created Control System Engineer position. Our client has an extensive history of designing, integrating, and commissioning, industrial automation processes and production control systems for use in a wide variety of industries, including click apply for full job details
Mar 28, 2024
Full time
£45,000 - £65,000 (DOE) + Annual Bonus Scheme + Paid Overtime + Excellent Benefits Orion Automation are supporting a leading systems integration company on a newly created Control System Engineer position. Our client has an extensive history of designing, integrating, and commissioning, industrial automation processes and production control systems for use in a wide variety of industries, including click apply for full job details
Cyber Security Apprentice Location: Burnley Area (flexible working after probation in line with company policy) Salary: Apprentice Wage Join our clients company and embark on an exciting journey to kickstart or advance your career in IT as a Cyber Security Technician. In this role, you will play a crucial part in safeguarding the information and systems of the company and its clients, aligning with business needs and upholding Information Security principles. Gain valuable experience in detecting network security breaches, delivering 1st and 2nd line support solutions, and collecting information for escalation to incident response teams or other specified functions. Your Responsibilities: Monitor company and client networks for malicious activity. Provide 1st and 2nd line support for security incidents as an integral member of the Seriun cyber team. Respond to and investigate alerts, contribute to developing new security monitoring use cases, and ensure proper documentation of investigative activities in ticketing systems, followed up with relevant support teams. Monitor open-source intelligence sources for potential threats against the company and its clients, taking appropriate defensive actions. Conduct vulnerability scans on customer network infrastructures, interpret results, and collaborate with relevant support teams to address issues. Support projects within the Information Security function. Contribute to Cyber Essentials and Cyber Essentials Plus projects. Qualifications: Essential: GCSE or equivalent in English (Grades A - C / 9-4) Essential: GCSE or equivalent in Maths (Grades A - C / 9-4) Desired Skills and Personal Qualities: Strong eagerness to learn. Excellent time management skills for flexible and pressure-filled work environments. Effective communication skills to thrive in a fast-paced setting. Ability to prioritize workloads and seek guidance when needed. Demonstrated interest and proficiency in IT (through education or self-tuition). Fault-finding/troubleshooting ability. Understanding of IT network features and functions. Knowledge of basic security concepts and security technologies. Salary and Benefits: Our people are important to us, so we believe in looking after them as best we can. We have an engagement policy with perks and benefits, including: Tools to get the job done - A new high-spec Dell laptop and mobile phone expenses Cashback Healthcare Plan Career and personal development Annual away day for feedback and positive change Fun CSR activities, friendly environment and relaxed workplace Social days/evenings out and the Seriun festival (Coming soon) Hot lunch on last Friday of every month, with a catered-for style lunch every quarter Xmas parties (which are on another level!) Inpowa - employee reward system - prizes for the great work you do Annual Incremental holidays (maximum of 5 extra days after 3 years' service) Ability to purchase holidays Long service rewards and awards Career Progression policy of internal recruitment over external If you believe this is the sort of exciting opportunity you are looking for to start your career within Cyber Security please apply. Please also get in touch if you know anyone who would be well suited. In Technology Group Ltd is acting as an Employment Agency in relation to this vacancy.
Mar 28, 2024
Full time
Cyber Security Apprentice Location: Burnley Area (flexible working after probation in line with company policy) Salary: Apprentice Wage Join our clients company and embark on an exciting journey to kickstart or advance your career in IT as a Cyber Security Technician. In this role, you will play a crucial part in safeguarding the information and systems of the company and its clients, aligning with business needs and upholding Information Security principles. Gain valuable experience in detecting network security breaches, delivering 1st and 2nd line support solutions, and collecting information for escalation to incident response teams or other specified functions. Your Responsibilities: Monitor company and client networks for malicious activity. Provide 1st and 2nd line support for security incidents as an integral member of the Seriun cyber team. Respond to and investigate alerts, contribute to developing new security monitoring use cases, and ensure proper documentation of investigative activities in ticketing systems, followed up with relevant support teams. Monitor open-source intelligence sources for potential threats against the company and its clients, taking appropriate defensive actions. Conduct vulnerability scans on customer network infrastructures, interpret results, and collaborate with relevant support teams to address issues. Support projects within the Information Security function. Contribute to Cyber Essentials and Cyber Essentials Plus projects. Qualifications: Essential: GCSE or equivalent in English (Grades A - C / 9-4) Essential: GCSE or equivalent in Maths (Grades A - C / 9-4) Desired Skills and Personal Qualities: Strong eagerness to learn. Excellent time management skills for flexible and pressure-filled work environments. Effective communication skills to thrive in a fast-paced setting. Ability to prioritize workloads and seek guidance when needed. Demonstrated interest and proficiency in IT (through education or self-tuition). Fault-finding/troubleshooting ability. Understanding of IT network features and functions. Knowledge of basic security concepts and security technologies. Salary and Benefits: Our people are important to us, so we believe in looking after them as best we can. We have an engagement policy with perks and benefits, including: Tools to get the job done - A new high-spec Dell laptop and mobile phone expenses Cashback Healthcare Plan Career and personal development Annual away day for feedback and positive change Fun CSR activities, friendly environment and relaxed workplace Social days/evenings out and the Seriun festival (Coming soon) Hot lunch on last Friday of every month, with a catered-for style lunch every quarter Xmas parties (which are on another level!) Inpowa - employee reward system - prizes for the great work you do Annual Incremental holidays (maximum of 5 extra days after 3 years' service) Ability to purchase holidays Long service rewards and awards Career Progression policy of internal recruitment over external If you believe this is the sort of exciting opportunity you are looking for to start your career within Cyber Security please apply. Please also get in touch if you know anyone who would be well suited. In Technology Group Ltd is acting as an Employment Agency in relation to this vacancy.
About Us We are seeking a driven and results-oriented Software Engineer to join and highly experinced Mission Systems team. You will play a crucial role in delivering innovative solutions to our expanding customer base, utilising your strong background in object-oriented Software Development, Computer Engineering, and networks. Key Responsibilities As a Software Engineer, you will: Contribute to requirements capture, design, development, testing, and delivery of software applications and products. Undertake troubleshooting, analyze, and resolve issues on existing systems. Collaborate with team members on a range of exciting projects, from proof of concept to customer delivery, throughout the software lifecycle. Required Experience Proficiency in object-oriented software development using C#, Microsoft .Net Framework (C#), and .NET Core. Experience developing software for complex control systems. Familiarity with version management and control tools such as git. Good understanding of software development and Agile Software Engineering best practices. Desirable Experience Development experience with technologies such as HTTP REST, XML, JSON; databases such as SQLite, PostgreSQL, and API creation. Use of Code Quality Tooling (e.g., SonarQube, Checkstyle), understanding of software design patterns, and familiarity with DevOps and Automated Testing. Qualifications and Skills A relevant Engineering or IT qualification (degree, foundation degree, or HND). Positive attitude, problem-solving mindset, and ability to propose innovative solutions. Drive to deliver results on time, meeting cost and quality targets, taking ownership of issues, and working diligently towards resolutions.
Mar 28, 2024
Full time
About Us We are seeking a driven and results-oriented Software Engineer to join and highly experinced Mission Systems team. You will play a crucial role in delivering innovative solutions to our expanding customer base, utilising your strong background in object-oriented Software Development, Computer Engineering, and networks. Key Responsibilities As a Software Engineer, you will: Contribute to requirements capture, design, development, testing, and delivery of software applications and products. Undertake troubleshooting, analyze, and resolve issues on existing systems. Collaborate with team members on a range of exciting projects, from proof of concept to customer delivery, throughout the software lifecycle. Required Experience Proficiency in object-oriented software development using C#, Microsoft .Net Framework (C#), and .NET Core. Experience developing software for complex control systems. Familiarity with version management and control tools such as git. Good understanding of software development and Agile Software Engineering best practices. Desirable Experience Development experience with technologies such as HTTP REST, XML, JSON; databases such as SQLite, PostgreSQL, and API creation. Use of Code Quality Tooling (e.g., SonarQube, Checkstyle), understanding of software design patterns, and familiarity with DevOps and Automated Testing. Qualifications and Skills A relevant Engineering or IT qualification (degree, foundation degree, or HND). Positive attitude, problem-solving mindset, and ability to propose innovative solutions. Drive to deliver results on time, meeting cost and quality targets, taking ownership of issues, and working diligently towards resolutions.
Are you a seasoned professional in Building Information Modelling (BIM) with a proven track record in managing teams and delivering exceptional results? Do you thrive in a fast-paced environment, leading cutting-edge projects in the construction industry? If so, we have an exciting opportunity for you! Jackson Consults are working with a leading Tier 1 subcontractor dedicated to delivering high-quality MEP (Mechanical, Electrical, Plumbing) solutions for complex construction projects. Their commitment to efficiency, and excellence has earned a reputation as an industry leader. We are currently seeking a talented and experienced BIM Coordination Manager to join their BIM (RevitMEP) Team As the BIM Coordination Manager, you will be responsible for leading a team of Revit MEP modelers, overseeing the implementation of BIM processes and workflows. Your primary focus will be on coordinating with project stakeholders, managing clash detection, and ensuring the accuracy and integrity of BIM models throughout the project lifecycle. Key Responsibilities: Manage and mentor a team of Revit MEP modelers, providing guidance and support to ensure project objectives are met. Collaborate with project managers, engineers, architects, and other stakeholders to develop and implement BIM execution plans. Conduct clash detection analysis and resolve conflicts in coordination meetings to optimize MEP systems. Review and validate BIM models for accuracy, compliance, and constructibility. Coordinate with subcontractors and vendors to integrate their models into the overall project BIM environment. Stay current with industry trends, standards, and best practices related to BIM technology and methodology. Qualifications: Bachelor's degree in Engineering, Architecture, Construction Management, or related field would beneficial Minimum of 5 years of experience in BIM coordination within the construction industry, with a focus on MEP systems. Proficiency in Autodesk Revit MEP and other BIM software applications. Strong leadership and communication skills, with the ability to effectively manage teams and collaborate with diverse stakeholders. Experience in clash detection, model coordination, and clash resolution processes. Knowledge of relevant codes, standards, and regulations related to MEP systems. Ability to prioritise tasks, meet deadlines, and adapt to changing project requirements. Benefits: Competitive salary commensurate with experience. Comprehensive benefits package Opportunities for professional development and advancement within a dynamic and growing organisation. Exciting projects with top-tier clients and the latest BIM technologies. If you are ready to take on a leadership role in BIM coordination and contribute to the success of MEP Building services projects, we want to hear from you! Please do apply.
Mar 28, 2024
Full time
Are you a seasoned professional in Building Information Modelling (BIM) with a proven track record in managing teams and delivering exceptional results? Do you thrive in a fast-paced environment, leading cutting-edge projects in the construction industry? If so, we have an exciting opportunity for you! Jackson Consults are working with a leading Tier 1 subcontractor dedicated to delivering high-quality MEP (Mechanical, Electrical, Plumbing) solutions for complex construction projects. Their commitment to efficiency, and excellence has earned a reputation as an industry leader. We are currently seeking a talented and experienced BIM Coordination Manager to join their BIM (RevitMEP) Team As the BIM Coordination Manager, you will be responsible for leading a team of Revit MEP modelers, overseeing the implementation of BIM processes and workflows. Your primary focus will be on coordinating with project stakeholders, managing clash detection, and ensuring the accuracy and integrity of BIM models throughout the project lifecycle. Key Responsibilities: Manage and mentor a team of Revit MEP modelers, providing guidance and support to ensure project objectives are met. Collaborate with project managers, engineers, architects, and other stakeholders to develop and implement BIM execution plans. Conduct clash detection analysis and resolve conflicts in coordination meetings to optimize MEP systems. Review and validate BIM models for accuracy, compliance, and constructibility. Coordinate with subcontractors and vendors to integrate their models into the overall project BIM environment. Stay current with industry trends, standards, and best practices related to BIM technology and methodology. Qualifications: Bachelor's degree in Engineering, Architecture, Construction Management, or related field would beneficial Minimum of 5 years of experience in BIM coordination within the construction industry, with a focus on MEP systems. Proficiency in Autodesk Revit MEP and other BIM software applications. Strong leadership and communication skills, with the ability to effectively manage teams and collaborate with diverse stakeholders. Experience in clash detection, model coordination, and clash resolution processes. Knowledge of relevant codes, standards, and regulations related to MEP systems. Ability to prioritise tasks, meet deadlines, and adapt to changing project requirements. Benefits: Competitive salary commensurate with experience. Comprehensive benefits package Opportunities for professional development and advancement within a dynamic and growing organisation. Exciting projects with top-tier clients and the latest BIM technologies. If you are ready to take on a leadership role in BIM coordination and contribute to the success of MEP Building services projects, we want to hear from you! Please do apply.
The System Architecture Group is responsible for strategy, architecture, design, and plan - covering all technology aspects from customer terminal to gateways. The function will ensure deeper engineering focus for new tech induction, hybrid fleet and network integration, customer solutions, resource optimization, business efficiency, and profitability Client Details Our client is a leading provider of satellite operations across the globe. Description ROLE PURPOSE The role will report directly into the Head of System Engineering and whilst specific responsibilities will be dependent upon the changing needs of the business, the following provides an overview of the role's key responsibilities and measures Architect, Design and Deliver solutions using existing Infrastructure components. Where new infrastructure technologies are being introduced, implement them, and establish best practice for their adoption. Resolve incidents that have not been seen before and initiate change to ensure that issues can be easily dealt with in future. Contribute to the Technology Roadmap for the businesses Technology Data Centres and Services Evaluate new tools and techniques being able to understand their value and impact. Lead group design discussions on my area of expertise and be able to present with authority to a variety of audiences. Coach and mentor system engineers across Technology who are at a more junior level. Ensure that my own team's designs are of a high quality and understand the impacts to any other areas of infrastructure. Keep technical skills up to date and keep track of new technologies, understanding how they might benefit the Technology team Introduce automation for high performance and effectiveness. Be the key technical and design authority for the Team and along with the Solution Engineering, the main relationship holder with the Architecture and Product Team. KEY ACCOUNTABILITIES Experience designing and deploying solutions for large, complex global organisations Analytical and structured approach to design, process, and advanced troubleshooting Ability to produce and maintain high quality HLD/LLD and Standards documentation Well organised self-starter who takes personal ownership and accountability at required levels of the work stream and project life cycles; willing to go the extra mile at every opportunity Builds and maintains positive relationships within and across teams Provides technical leadership within teams and mentoring for individuals Communicates effectively, able to deliver and present both written and verbal, designs, strategies and concepts clearly and effectively to Senior & Jnr staff alike Profile SKILLS AND QUALIFICATIONS Required Technology Skills: Excellent/CCNA levels of practical experience in designing/building, operating large-scale, Multilayer Switching and Routing using Juniper or preferably Arista and Cisco equipment and OS in a WAN and LAN environment using technologies like Multicast, Port Channelling, EIGRP, CDP, GLBP, VRF, QoS Very good knowledge of Wide Area Networking technologies and protocols, such as MPLS, WAN,CoS, DWDM. Ideally, with experience of dealing with major Global Comms suppliers Excellent technical knowledge of OSI network topologies, troubleshooting and design eg Routing Protocols (BGP, OSPF, iGRP), DNS, DHCP, IP Address Management and TCP/UDP Port RFC & IEEE 802-based standards. Juniper/Cisco Switches deployed in Spine/Leaf topology High levels of VPN experience along with associated technologies and protocols eg IPSec, Public/Private Key Encryption, TLS/SSL, digital cert techniques like ISA/KMP GRE and DMVPN High levels of Load balancing & Global/DNS balancing technologies and techniques, preferably Fortinet hardware and/or software appliances/cloud versions Good understanding of browser-based technologies and protocols like HTML, HTTP/HTTPS and XML Good understanding of Network Management technologies and protocols like SNMP, Netflow, IPSLA, along with practical experience of associated Network Management & Alerting Tools Desired Technical Skills (on top of the above mandatory skills) Good technical knowledge of Firewalls Platforms and Technologies, including build/configuration of some of the following Fortinet (pref along with associated Management Systems and Firewall rule analysis tools eg Skybox, Tufin High levels of knowledge of remote access and two factor authentication technologies and AAA solutions, eg RSA, Juniper/Pulse, Cisco ACS, Radius High levels of experience of Threat prevention and detection techniques and associated technologies like IPS, IDS, APT/SEIM, Secure Proxy. SDN/automation technologies/configuration tools/ZTP and rom likes of Juniper/MIST along with more open source/Technology-wide solutions like G.IT, Chef, Anisble or Puppet, preferably in a DevOps environment Automation and Scripting knowledge (eg Python, Unix/Linux or PowerShell & Batch) Job Offer This role is paying up to £90,000 for the perfect candidate plus up to 10% bonus based on company performance. This is a hybrid role - 2 days on site are required every week in West London
Mar 28, 2024
Full time
The System Architecture Group is responsible for strategy, architecture, design, and plan - covering all technology aspects from customer terminal to gateways. The function will ensure deeper engineering focus for new tech induction, hybrid fleet and network integration, customer solutions, resource optimization, business efficiency, and profitability Client Details Our client is a leading provider of satellite operations across the globe. Description ROLE PURPOSE The role will report directly into the Head of System Engineering and whilst specific responsibilities will be dependent upon the changing needs of the business, the following provides an overview of the role's key responsibilities and measures Architect, Design and Deliver solutions using existing Infrastructure components. Where new infrastructure technologies are being introduced, implement them, and establish best practice for their adoption. Resolve incidents that have not been seen before and initiate change to ensure that issues can be easily dealt with in future. Contribute to the Technology Roadmap for the businesses Technology Data Centres and Services Evaluate new tools and techniques being able to understand their value and impact. Lead group design discussions on my area of expertise and be able to present with authority to a variety of audiences. Coach and mentor system engineers across Technology who are at a more junior level. Ensure that my own team's designs are of a high quality and understand the impacts to any other areas of infrastructure. Keep technical skills up to date and keep track of new technologies, understanding how they might benefit the Technology team Introduce automation for high performance and effectiveness. Be the key technical and design authority for the Team and along with the Solution Engineering, the main relationship holder with the Architecture and Product Team. KEY ACCOUNTABILITIES Experience designing and deploying solutions for large, complex global organisations Analytical and structured approach to design, process, and advanced troubleshooting Ability to produce and maintain high quality HLD/LLD and Standards documentation Well organised self-starter who takes personal ownership and accountability at required levels of the work stream and project life cycles; willing to go the extra mile at every opportunity Builds and maintains positive relationships within and across teams Provides technical leadership within teams and mentoring for individuals Communicates effectively, able to deliver and present both written and verbal, designs, strategies and concepts clearly and effectively to Senior & Jnr staff alike Profile SKILLS AND QUALIFICATIONS Required Technology Skills: Excellent/CCNA levels of practical experience in designing/building, operating large-scale, Multilayer Switching and Routing using Juniper or preferably Arista and Cisco equipment and OS in a WAN and LAN environment using technologies like Multicast, Port Channelling, EIGRP, CDP, GLBP, VRF, QoS Very good knowledge of Wide Area Networking technologies and protocols, such as MPLS, WAN,CoS, DWDM. Ideally, with experience of dealing with major Global Comms suppliers Excellent technical knowledge of OSI network topologies, troubleshooting and design eg Routing Protocols (BGP, OSPF, iGRP), DNS, DHCP, IP Address Management and TCP/UDP Port RFC & IEEE 802-based standards. Juniper/Cisco Switches deployed in Spine/Leaf topology High levels of VPN experience along with associated technologies and protocols eg IPSec, Public/Private Key Encryption, TLS/SSL, digital cert techniques like ISA/KMP GRE and DMVPN High levels of Load balancing & Global/DNS balancing technologies and techniques, preferably Fortinet hardware and/or software appliances/cloud versions Good understanding of browser-based technologies and protocols like HTML, HTTP/HTTPS and XML Good understanding of Network Management technologies and protocols like SNMP, Netflow, IPSLA, along with practical experience of associated Network Management & Alerting Tools Desired Technical Skills (on top of the above mandatory skills) Good technical knowledge of Firewalls Platforms and Technologies, including build/configuration of some of the following Fortinet (pref along with associated Management Systems and Firewall rule analysis tools eg Skybox, Tufin High levels of knowledge of remote access and two factor authentication technologies and AAA solutions, eg RSA, Juniper/Pulse, Cisco ACS, Radius High levels of experience of Threat prevention and detection techniques and associated technologies like IPS, IDS, APT/SEIM, Secure Proxy. SDN/automation technologies/configuration tools/ZTP and rom likes of Juniper/MIST along with more open source/Technology-wide solutions like G.IT, Chef, Anisble or Puppet, preferably in a DevOps environment Automation and Scripting knowledge (eg Python, Unix/Linux or PowerShell & Batch) Job Offer This role is paying up to £90,000 for the perfect candidate plus up to 10% bonus based on company performance. This is a hybrid role - 2 days on site are required every week in West London
Our client is currently looking to recruit a Maintenance Manager / Engineering Manager to join their busy Team.The successful candidate will be joining an established company to manage the site maintenance operation and maintain the Health and Safety within the team. You will have hands on mechanical / electrical experience and in warehouse management systems click apply for full job details
Mar 28, 2024
Full time
Our client is currently looking to recruit a Maintenance Manager / Engineering Manager to join their busy Team.The successful candidate will be joining an established company to manage the site maintenance operation and maintain the Health and Safety within the team. You will have hands on mechanical / electrical experience and in warehouse management systems click apply for full job details
La Fosse Associates Limited
Kidlington, Oxfordshire
Role : Infrastructure Engineer Location : Kidlington, Oxford Salary : Up to £45,000 + 10% Bonus + Benefits The position: We are looking for a skilled and proactive On-Site IT Support Engineer to provide technical assistance and support to our employees across multiple sites. The successful candidate will be responsible for maintaining, troubleshooting, and resolving hardware, software, and network issues to ensure smooth operations across the organisation. Key responsibilities will include: Provide on-site technical support to end-users, including troubleshooting hardware, software, and network issues. Install, configure, and upgrade computer systems and software applications. Monitor IT systems, including Servers, networks, and applications, to detect and resolve issues proactively. Diagnose and resolve technical problems in a timely manner to minimize downtime and disruptions. Collaborate with the IT team to implement and maintain IT policies, procedures, and standards. Creating and maintaining technical documentation and guides Document and maintain accurate records of IT assets, configurations, and support activities. Provide excellent customer service and communication to ensure a positive end-user experience. Skills/Experience required: Proven experience as an IT Support Engineer or similar role, with a strong understanding of computer systems, networks, and peripherals. Highly competent in troubleshooting hardware, software, and network issues in a Windows environment. Hands-on experience with Microsoft Office, Active Directory, and remote desktop support tools. Excellent understanding of networking concepts, including TCP/IP, DNS, DHCP, and LAN/WAN technologies. Excellent knowledge of VMware and Windows Server technologies. Strong interpersonal and communication skills, with a customer-centric approach. Ability to work independently and collaborate effectively with cross-functional teams. Flexibility to work outside regular business hours and respond to emergencies as needed/Prepared to travel to other sites as required. Please apply for more information!
Mar 28, 2024
Full time
Role : Infrastructure Engineer Location : Kidlington, Oxford Salary : Up to £45,000 + 10% Bonus + Benefits The position: We are looking for a skilled and proactive On-Site IT Support Engineer to provide technical assistance and support to our employees across multiple sites. The successful candidate will be responsible for maintaining, troubleshooting, and resolving hardware, software, and network issues to ensure smooth operations across the organisation. Key responsibilities will include: Provide on-site technical support to end-users, including troubleshooting hardware, software, and network issues. Install, configure, and upgrade computer systems and software applications. Monitor IT systems, including Servers, networks, and applications, to detect and resolve issues proactively. Diagnose and resolve technical problems in a timely manner to minimize downtime and disruptions. Collaborate with the IT team to implement and maintain IT policies, procedures, and standards. Creating and maintaining technical documentation and guides Document and maintain accurate records of IT assets, configurations, and support activities. Provide excellent customer service and communication to ensure a positive end-user experience. Skills/Experience required: Proven experience as an IT Support Engineer or similar role, with a strong understanding of computer systems, networks, and peripherals. Highly competent in troubleshooting hardware, software, and network issues in a Windows environment. Hands-on experience with Microsoft Office, Active Directory, and remote desktop support tools. Excellent understanding of networking concepts, including TCP/IP, DNS, DHCP, and LAN/WAN technologies. Excellent knowledge of VMware and Windows Server technologies. Strong interpersonal and communication skills, with a customer-centric approach. Ability to work independently and collaborate effectively with cross-functional teams. Flexibility to work outside regular business hours and respond to emergencies as needed/Prepared to travel to other sites as required. Please apply for more information!