NEW CONTRACT OPPORTUNITY FOR A WELDING BLACK HAT SUPERVISOR IN SOMERSET 6 Month Contract Inside IR35 Hybrid working - 2/3 days on site in Somerset Must be eligible for BPSS Clearance Previous experience working on Nuclear site is highly desired To apply please email: WHAT WILL THE BLACK HAT SUPERVISOR BE DOING? The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structu click apply for full job details
Apr 16, 2024
Contractor
NEW CONTRACT OPPORTUNITY FOR A WELDING BLACK HAT SUPERVISOR IN SOMERSET 6 Month Contract Inside IR35 Hybrid working - 2/3 days on site in Somerset Must be eligible for BPSS Clearance Previous experience working on Nuclear site is highly desired To apply please email: WHAT WILL THE BLACK HAT SUPERVISOR BE DOING? The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structu click apply for full job details
Mechanical Maintenance Craftsperson Exeter Permanent £25,000- £27,500 plus £3,200 bonus per year Girling Jones are currently recruiting for a Mechanical maintenance Craftsperson site based in Exeter. Key Responsibilities Routine fault finding, testing, manufacturing, replacing, isolation, modifying, inspecting, improving, installing, maintaining and repairing of all mechanical services, plant and equipment in compliance with all good practice guides, operational maintenance manuals and statutory requirements. Be proactive with regard to all forms of maintenance, good site husbandry and security. Working to specifications and drawings, responsible for ensuring completion minimising waste within set dates and times. To understand and adhere to the Trust Health and Safety at Work policy, Fire procedures, Manual handling, Health and Safety at Work Act, Control of Legionella, WRAS, scald prevention, Control of Infection, adherence to set Engineering standards in accordance with health and safety requirements, ensuring safe work practices and standard operating procedures are followed. To be proficient in the safe usage of all hand, machine tools, test, welding and brazing equipment applicable to the trade. To be proficient in carrying out speedy, effective repairs and planned preventative maintenance on all types of plant, clinical, non clinical and other equipment only found in a healthcare environment, including, air conditioning/ventilation, patient trolleys, electrical/mechanical hospital beds, operating tables, patient hoists, water mixing valves, gas installations, boilers, calorifiers, generators, heater batteries, pumps, bedpan washers, macerators, compactors, compressors, refrigeration machinery, chilled water systems, domestic water, fire fighting equipment, medical gases, agss & suction, decontamination equipment, equipment calibration, hydrotherapy pool, fuel systems, alarm and control systems, ward equipment etc. as directed by the Mechanical Supervisor. Work alone, without immediate supervision, in a team, demonstrating trade techniques to apprentices, occasionally assisting other trades and contractors when required. To have the ability to carry out minor duties of other trades when required such as electrical, building and carpentry. Attend all training and lectures when requested by the Maintenance Supervisor to assist with continual and personal development. Qualifications / Certificates required Apprentice Trained Mechnical Craftspersom NVQ Level 3 or Equivalent Ability to install, maintain and repair mechanical services, plant and equipment. Ability to work alone or as part of a team. Good interpersonal skills. Ability to learn new skills. Able to join on-call team. Undertake out of hours working when required. Benefits for you £25,000 - £27,500 Basic Salary Annual Bonus off £3,200 paid pro rota monthly 37.5 Hours a week Fleet Vehicle which can be taken home £1.87 an hour standby rate Time and half on call out Blue Card Benefits For More information please contact (url removed)
Apr 15, 2024
Full time
Mechanical Maintenance Craftsperson Exeter Permanent £25,000- £27,500 plus £3,200 bonus per year Girling Jones are currently recruiting for a Mechanical maintenance Craftsperson site based in Exeter. Key Responsibilities Routine fault finding, testing, manufacturing, replacing, isolation, modifying, inspecting, improving, installing, maintaining and repairing of all mechanical services, plant and equipment in compliance with all good practice guides, operational maintenance manuals and statutory requirements. Be proactive with regard to all forms of maintenance, good site husbandry and security. Working to specifications and drawings, responsible for ensuring completion minimising waste within set dates and times. To understand and adhere to the Trust Health and Safety at Work policy, Fire procedures, Manual handling, Health and Safety at Work Act, Control of Legionella, WRAS, scald prevention, Control of Infection, adherence to set Engineering standards in accordance with health and safety requirements, ensuring safe work practices and standard operating procedures are followed. To be proficient in the safe usage of all hand, machine tools, test, welding and brazing equipment applicable to the trade. To be proficient in carrying out speedy, effective repairs and planned preventative maintenance on all types of plant, clinical, non clinical and other equipment only found in a healthcare environment, including, air conditioning/ventilation, patient trolleys, electrical/mechanical hospital beds, operating tables, patient hoists, water mixing valves, gas installations, boilers, calorifiers, generators, heater batteries, pumps, bedpan washers, macerators, compactors, compressors, refrigeration machinery, chilled water systems, domestic water, fire fighting equipment, medical gases, agss & suction, decontamination equipment, equipment calibration, hydrotherapy pool, fuel systems, alarm and control systems, ward equipment etc. as directed by the Mechanical Supervisor. Work alone, without immediate supervision, in a team, demonstrating trade techniques to apprentices, occasionally assisting other trades and contractors when required. To have the ability to carry out minor duties of other trades when required such as electrical, building and carpentry. Attend all training and lectures when requested by the Maintenance Supervisor to assist with continual and personal development. Qualifications / Certificates required Apprentice Trained Mechnical Craftspersom NVQ Level 3 or Equivalent Ability to install, maintain and repair mechanical services, plant and equipment. Ability to work alone or as part of a team. Good interpersonal skills. Ability to learn new skills. Able to join on-call team. Undertake out of hours working when required. Benefits for you £25,000 - £27,500 Basic Salary Annual Bonus off £3,200 paid pro rota monthly 37.5 Hours a week Fleet Vehicle which can be taken home £1.87 an hour standby rate Time and half on call out Blue Card Benefits For More information please contact (url removed)
SITE SUPERVISOR PERMANENT REMOTE YOU Recruit is working with a sector leader and on the look out for a Site Supervisor. Due to continued success and growth, a rewarding career opportunity has arisen for a Site Supervisor with mechanical discipline and experience to join our clients service, repairs, and installation teams, working nationally and internationally at client sites. Our vast range of projects vary from 1 week to 3 months, and you could find yourself anywhere on the globe from Doncaster to Scotland or even Mauritius! In your role as Site Supervisor, you will manage the execution of installation, repair, and servicing works of a diverse range of heat exchanger equipment, and act as the key link to orchestrate and ensure quality, timely and excellent project delivery, in line with client, employer and accreditation standards. This is a real lead from the front role, in that you ll be responsible for quality assurance and associated paperwork, managing a team of multi-skilled engineers, and participate in mechanical job delivery alongside the team. This is a demanding role, typically consisting of 8 12-hour shifts on client sites, working days and nights, and working and staying away from home. However, we promise a dynamic and fun environment, enjoying the benefit of diversification of products and multiple flows of work. Have a read about the role below. Don t forget to scroll all the way to the bottom to read about the remuneration and benefits package that comes as standard when you join a company like this! What s on offer: CONTRACT: Permanent position LOCATION: Remote SALARY: £60,000 - £80,000 per annum (DOE) What you ll be getting up too: It is important to note that our clients business is not static, and each day can vary, particularly as we continue to evolve. We believe in working together to get a job done well, and as such your role is fluid with an expectation to work collaboratively and perform tasks as necessitated by the business objectives. • Manage Small to medium sized projects- • Preparation of risk assessments & method statements • Ensure sitework is adequately resourced with right skills • Ensuring contracts are delivered to specified quality standards within the parameters of ITPs, PDs, OPS etc • Preparation of site jobs, tools, consumables • Maintaining daily reports communicating with other departments • Ensuring correct welding WPS/PQR/WPQs are in place • Responsible for QA documentation in relation to project activities • Handover of completed projects and issue invoice instructions to administration • Communicate adaptively with clients, external stakeholders, and internal stakeholders • Managing site team, including sub-contractors- • Collating and submitting time sheets & daily reports • Manage health and safety • Prepare QA Packs • Ensure work quality • Ensure work is executed OTIF, within budget • Undertaking site visits, surveys gathering information • Producing detailed quotations, cost estimations, project plans and sitework documentation • Proactively seeking improvements in methodology increasing productivity and efficiency • Participation of sales, contracts, aftermarket handovers • Responsible for upkeep of tooling and consumables ensuring availability and safe working condition • Working closely with engineering department • Working from P&IDs, isometrics, relevant design codes and insurances companies such as Lloyds, BV, B.E.S etc • Undertaking inspections on Land and Marine boilers globally issuing reports detailing condition and recommendations. (Desirable but not essential) • Proving support to the spares department with technical advice What we re looking for: • Highly organised self-starter • Computer literate, and familiar with MS Office applications, e.g. Word and Excel • Understands and demonstrates safe working practises with a focus on continuous improvement • Excellent communication and interpersonal skills, with the ability to adapt communication styles to customer, client and colleague needs • Team focused with a collaborative and solutions-focused approach • Experience and qualifications in mechanical fitting or other manual/ engineering role • Comfortable working in a dynamic and demanding environment with multiple flows of work • Full UK Driving License with less than 6 points • Flexibility to accommodate long hours and working away from home • Keenness to travel • IOSH Managing Safely qualification highly desirable • Site Safety Passport essential • Confined Space certification essential • Experience in some or all is essential - Steam boilers, pipe fitting, Plating, Economisers, power station, energy from waste, oil and gas What you ll benefit from: • In return for your services, you will receive the following, as standard: • Enhanced pension - 5% employer contribution (salary sacrifice option available) • Annual learning at work week with free pension financial advice • 25 days annual leave + statutory public holidays • Cash Health Care Scheme for you & any children • Retail discount app • Life Assurance of 4 x annual salary • Monthly Reward & Recognition Programmes linked to H&S & peer-peer recognition • LOS awards including a 4-week paid sabbatical • Employee Assistance Programme • Access to internal Wellbeing Coaches (qualified mental health first aiders) • Company Profit Sharing Bonus • Your own Personal Development Plan with company commitment to continuous learning and development • Company Sick Pay up to 6 months • Enhanced family policies maternity, paternity, shared parental, adoption, neonatal, ivf, stillbirth & miscarriage • We are open to discussing flexible working opportunities, however for this role a considerable proportion of time must be spent on site at Wakefield.
Apr 11, 2024
Full time
SITE SUPERVISOR PERMANENT REMOTE YOU Recruit is working with a sector leader and on the look out for a Site Supervisor. Due to continued success and growth, a rewarding career opportunity has arisen for a Site Supervisor with mechanical discipline and experience to join our clients service, repairs, and installation teams, working nationally and internationally at client sites. Our vast range of projects vary from 1 week to 3 months, and you could find yourself anywhere on the globe from Doncaster to Scotland or even Mauritius! In your role as Site Supervisor, you will manage the execution of installation, repair, and servicing works of a diverse range of heat exchanger equipment, and act as the key link to orchestrate and ensure quality, timely and excellent project delivery, in line with client, employer and accreditation standards. This is a real lead from the front role, in that you ll be responsible for quality assurance and associated paperwork, managing a team of multi-skilled engineers, and participate in mechanical job delivery alongside the team. This is a demanding role, typically consisting of 8 12-hour shifts on client sites, working days and nights, and working and staying away from home. However, we promise a dynamic and fun environment, enjoying the benefit of diversification of products and multiple flows of work. Have a read about the role below. Don t forget to scroll all the way to the bottom to read about the remuneration and benefits package that comes as standard when you join a company like this! What s on offer: CONTRACT: Permanent position LOCATION: Remote SALARY: £60,000 - £80,000 per annum (DOE) What you ll be getting up too: It is important to note that our clients business is not static, and each day can vary, particularly as we continue to evolve. We believe in working together to get a job done well, and as such your role is fluid with an expectation to work collaboratively and perform tasks as necessitated by the business objectives. • Manage Small to medium sized projects- • Preparation of risk assessments & method statements • Ensure sitework is adequately resourced with right skills • Ensuring contracts are delivered to specified quality standards within the parameters of ITPs, PDs, OPS etc • Preparation of site jobs, tools, consumables • Maintaining daily reports communicating with other departments • Ensuring correct welding WPS/PQR/WPQs are in place • Responsible for QA documentation in relation to project activities • Handover of completed projects and issue invoice instructions to administration • Communicate adaptively with clients, external stakeholders, and internal stakeholders • Managing site team, including sub-contractors- • Collating and submitting time sheets & daily reports • Manage health and safety • Prepare QA Packs • Ensure work quality • Ensure work is executed OTIF, within budget • Undertaking site visits, surveys gathering information • Producing detailed quotations, cost estimations, project plans and sitework documentation • Proactively seeking improvements in methodology increasing productivity and efficiency • Participation of sales, contracts, aftermarket handovers • Responsible for upkeep of tooling and consumables ensuring availability and safe working condition • Working closely with engineering department • Working from P&IDs, isometrics, relevant design codes and insurances companies such as Lloyds, BV, B.E.S etc • Undertaking inspections on Land and Marine boilers globally issuing reports detailing condition and recommendations. (Desirable but not essential) • Proving support to the spares department with technical advice What we re looking for: • Highly organised self-starter • Computer literate, and familiar with MS Office applications, e.g. Word and Excel • Understands and demonstrates safe working practises with a focus on continuous improvement • Excellent communication and interpersonal skills, with the ability to adapt communication styles to customer, client and colleague needs • Team focused with a collaborative and solutions-focused approach • Experience and qualifications in mechanical fitting or other manual/ engineering role • Comfortable working in a dynamic and demanding environment with multiple flows of work • Full UK Driving License with less than 6 points • Flexibility to accommodate long hours and working away from home • Keenness to travel • IOSH Managing Safely qualification highly desirable • Site Safety Passport essential • Confined Space certification essential • Experience in some or all is essential - Steam boilers, pipe fitting, Plating, Economisers, power station, energy from waste, oil and gas What you ll benefit from: • In return for your services, you will receive the following, as standard: • Enhanced pension - 5% employer contribution (salary sacrifice option available) • Annual learning at work week with free pension financial advice • 25 days annual leave + statutory public holidays • Cash Health Care Scheme for you & any children • Retail discount app • Life Assurance of 4 x annual salary • Monthly Reward & Recognition Programmes linked to H&S & peer-peer recognition • LOS awards including a 4-week paid sabbatical • Employee Assistance Programme • Access to internal Wellbeing Coaches (qualified mental health first aiders) • Company Profit Sharing Bonus • Your own Personal Development Plan with company commitment to continuous learning and development • Company Sick Pay up to 6 months • Enhanced family policies maternity, paternity, shared parental, adoption, neonatal, ivf, stillbirth & miscarriage • We are open to discussing flexible working opportunities, however for this role a considerable proportion of time must be spent on site at Wakefield.
Role: Mechanical Fitter Salary:?38K to 43K depending on experience Hours:?37.5h Location:?Dorset As our Mechanical Fitter, you will provide Mechanical support for all key fixed plant and equipment at the Dorset Ball Clays operations, maintaining plant availability at high levels through planned routine maintenance and reaction to breakdowns. The Role: You will be reporting into the Maintenance Supervisor, with support from the Dorset Site Engineer. As part of the Dorset Maintenance team, you will help deliver sustenance and improvement projects and CER equipment installations whilst; Maintaining mechanical fixed processing plant - including fans, filters, mills, conveyors, packaging, etc. Fault finding and resolving mechanical issues, Installing and commissioning equipment, Recording what was done to resolve breakdowns and investigate the root cause. What's in for you? You will be working for Imerys, the world leader in mineral-based specialty solutions for industry, with over 16,000 employees and over 200 sites worldwide. Imerys delivers high value-added, functional solutions to diversified sets of industrial sectors, from processing industries to consumer goods. We support your professional development including training, costs, offering a competitive salary and other benefits such as; Company sick pay entitlement after 6 months service, Life Assurance, Defined Contribution Pension Plan, 25 days holiday plus Bank Holidays, Income Protection for DC members, Long Service awards, Reward Hub & Local Discounts, Flu Vouchers, Car Salary Sacrifice Scheme, Health & Wellbeing Programme, Eye Care Vouchers, Cycle to work scheme and Endeavour club (off site gym) to help you stay fit and healthy. What we ask you in return: You will be working with Safety and Environmental focus as your No1 consideration and have the following; Indentured mechanical engineering apprenticeship and/or cross skilled from mechanical to electrical. Qualified to NVQ3 level or minimum of 5 years' experience post apprenticeship. IT literate and preferably have experience in using ERP systems - particularly SAP. Have a good working knowledge of and work within, the EHSQ requirement. Undertake further training as and when required. Experience of maintaining Packaging Systems would be an advantage. Ideally holding mobile plant certification such as - Forklift, Work Platforms. Welding capability (training can be provided). Ideally, a good knowledge of 5S, Root Cause Analysis, Risk Assessments, KPI's and PPM. To apply for this opportunity and to join Imerys, please follow the instructions below. Our people are important to us, our workplaces are diverse and inclusive and whilst maintaining the health, safety and environmental standards on site, for yourself and others around you, we're an organisation with a wealth of career and development opportunities that allow you to tap into your full potential.
Apr 11, 2024
Full time
Role: Mechanical Fitter Salary:?38K to 43K depending on experience Hours:?37.5h Location:?Dorset As our Mechanical Fitter, you will provide Mechanical support for all key fixed plant and equipment at the Dorset Ball Clays operations, maintaining plant availability at high levels through planned routine maintenance and reaction to breakdowns. The Role: You will be reporting into the Maintenance Supervisor, with support from the Dorset Site Engineer. As part of the Dorset Maintenance team, you will help deliver sustenance and improvement projects and CER equipment installations whilst; Maintaining mechanical fixed processing plant - including fans, filters, mills, conveyors, packaging, etc. Fault finding and resolving mechanical issues, Installing and commissioning equipment, Recording what was done to resolve breakdowns and investigate the root cause. What's in for you? You will be working for Imerys, the world leader in mineral-based specialty solutions for industry, with over 16,000 employees and over 200 sites worldwide. Imerys delivers high value-added, functional solutions to diversified sets of industrial sectors, from processing industries to consumer goods. We support your professional development including training, costs, offering a competitive salary and other benefits such as; Company sick pay entitlement after 6 months service, Life Assurance, Defined Contribution Pension Plan, 25 days holiday plus Bank Holidays, Income Protection for DC members, Long Service awards, Reward Hub & Local Discounts, Flu Vouchers, Car Salary Sacrifice Scheme, Health & Wellbeing Programme, Eye Care Vouchers, Cycle to work scheme and Endeavour club (off site gym) to help you stay fit and healthy. What we ask you in return: You will be working with Safety and Environmental focus as your No1 consideration and have the following; Indentured mechanical engineering apprenticeship and/or cross skilled from mechanical to electrical. Qualified to NVQ3 level or minimum of 5 years' experience post apprenticeship. IT literate and preferably have experience in using ERP systems - particularly SAP. Have a good working knowledge of and work within, the EHSQ requirement. Undertake further training as and when required. Experience of maintaining Packaging Systems would be an advantage. Ideally holding mobile plant certification such as - Forklift, Work Platforms. Welding capability (training can be provided). Ideally, a good knowledge of 5S, Root Cause Analysis, Risk Assessments, KPI's and PPM. To apply for this opportunity and to join Imerys, please follow the instructions below. Our people are important to us, our workplaces are diverse and inclusive and whilst maintaining the health, safety and environmental standards on site, for yourself and others around you, we're an organisation with a wealth of career and development opportunities that allow you to tap into your full potential.
This is an opportunity for a welding supervisor to join one of the largest privately owned construction firms in the UK, working on a gas pipeline diversion project.The welding supervisor should have a welding background within the gas transmission and distribution sector and must be currently registered as a Competent Person (CP) with SGN. Project Info: Gas diversion, HDD, 180mm PE piping, a combination of butt welding and electrofusion welding Location: Waddesdon, Aylesbury Duration: Initially 5 months with the intention of an additional 6 months of work on a similar project on another site in Aylesbury. Pay Status: Inside IR35, CIS only. Hours: 8.5 hours per day Mon - Saturday (plus half hour unpaid lunch). Saturday hours will be paid at a premium rate x1.5. Rate: To be discussed upon application
Apr 11, 2024
Full time
This is an opportunity for a welding supervisor to join one of the largest privately owned construction firms in the UK, working on a gas pipeline diversion project.The welding supervisor should have a welding background within the gas transmission and distribution sector and must be currently registered as a Competent Person (CP) with SGN. Project Info: Gas diversion, HDD, 180mm PE piping, a combination of butt welding and electrofusion welding Location: Waddesdon, Aylesbury Duration: Initially 5 months with the intention of an additional 6 months of work on a similar project on another site in Aylesbury. Pay Status: Inside IR35, CIS only. Hours: 8.5 hours per day Mon - Saturday (plus half hour unpaid lunch). Saturday hours will be paid at a premium rate x1.5. Rate: To be discussed upon application
GI Group are looking for an experienced Production operative to join one of our clients based in Lytham. Working both independently and as part of a team to operate a range of machinery to produce a variety of metal materials with manual and automated equipment, to a high quality standard meeting hourly production targets. Job Details Monday - Thursday 37 hours a week 12.50 per hour Key Responsibilities: Maintaining high quality standards at all times for standard and bespoke products Proactive communication with supervisors, managers and Quality Control regarding production, quality and H&S issues. Maintaining a clean and tidy work area Maintaining H&S standards following instructions and wearing of appropriate PPE General Requirements Previous experience of working in an engineering sheet metal production Regular quality checks Following internal processes Completing paperwork Understanding of basic IT Previous experience obtained in a manufacturing environment Practical awareness of lean manufacturing and understanding of 5S activities Ideally with experience of Mechanical presses, Spot welding with general understanding of sheet metal processing Understanding of Engineering drawings If you are interested please APPLY NOW or call (phone number removed) Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited and Grafton Professional Staffing Limited. We are committed to protecting the privacy of all of our candidates and clients. Following some recent changes to data protection laws we have updated our Privacy Policy. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group UK website.
Mar 31, 2024
Seasonal
GI Group are looking for an experienced Production operative to join one of our clients based in Lytham. Working both independently and as part of a team to operate a range of machinery to produce a variety of metal materials with manual and automated equipment, to a high quality standard meeting hourly production targets. Job Details Monday - Thursday 37 hours a week 12.50 per hour Key Responsibilities: Maintaining high quality standards at all times for standard and bespoke products Proactive communication with supervisors, managers and Quality Control regarding production, quality and H&S issues. Maintaining a clean and tidy work area Maintaining H&S standards following instructions and wearing of appropriate PPE General Requirements Previous experience of working in an engineering sheet metal production Regular quality checks Following internal processes Completing paperwork Understanding of basic IT Previous experience obtained in a manufacturing environment Practical awareness of lean manufacturing and understanding of 5S activities Ideally with experience of Mechanical presses, Spot welding with general understanding of sheet metal processing Understanding of Engineering drawings If you are interested please APPLY NOW or call (phone number removed) Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited and Grafton Professional Staffing Limited. We are committed to protecting the privacy of all of our candidates and clients. Following some recent changes to data protection laws we have updated our Privacy Policy. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group UK website.
For this role, we are recruiting for both early and late shifts (If you are available for both, it will increase your chance of success) Attention all Welders/fabricators! Purpose of your Role: Responsible for the fabrication assembly, including welding, sanding, and ensuring the fabrication meets all drawing and welding standards. Duties and Responsibilities: Adhere to the Job Pack information, including signing Job Pack forms. Assist the Works Supervisor and Lead Operative and mentors. Listen to the mentors and develop fabrication skills as required. Inform Works Supervisor, Lead Operative and mentors of any urgently required equipment. Inform Works Supervisor, Lead Operative of any manufacturing or quality concerns. Must be self-motivated, able to work under own initiative and meet production deadlines. Flexibility on working hours and practises, and overtime requirements to support business needs. To effectively maintain the tidiness, safety and cleanliness of the work areas (5s Standards) As required sign for the receipt of delivered goods, deliver goods to the required area, forward any signed paperwork to the Works Supervisor Working closely with the Manufacturing Team, Works Supervisor, Lead Operatives, mentors other Works Operatives and in addition the Applications Engineers, Contracts Engineer and Fabrication Engineering Manager at all times. Attend meetings as required/requested Comply with the requirements BS EN ISO 9001 quality system. Essential Qualifications/Experiences: 5 Years minimum fabrication & welding experience Experience in bespoke fabrication environment Ability to read and work from engineering drawings. MIG/MAG Experience Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Mar 29, 2024
Full time
For this role, we are recruiting for both early and late shifts (If you are available for both, it will increase your chance of success) Attention all Welders/fabricators! Purpose of your Role: Responsible for the fabrication assembly, including welding, sanding, and ensuring the fabrication meets all drawing and welding standards. Duties and Responsibilities: Adhere to the Job Pack information, including signing Job Pack forms. Assist the Works Supervisor and Lead Operative and mentors. Listen to the mentors and develop fabrication skills as required. Inform Works Supervisor, Lead Operative and mentors of any urgently required equipment. Inform Works Supervisor, Lead Operative of any manufacturing or quality concerns. Must be self-motivated, able to work under own initiative and meet production deadlines. Flexibility on working hours and practises, and overtime requirements to support business needs. To effectively maintain the tidiness, safety and cleanliness of the work areas (5s Standards) As required sign for the receipt of delivered goods, deliver goods to the required area, forward any signed paperwork to the Works Supervisor Working closely with the Manufacturing Team, Works Supervisor, Lead Operatives, mentors other Works Operatives and in addition the Applications Engineers, Contracts Engineer and Fabrication Engineering Manager at all times. Attend meetings as required/requested Comply with the requirements BS EN ISO 9001 quality system. Essential Qualifications/Experiences: 5 Years minimum fabrication & welding experience Experience in bespoke fabrication environment Ability to read and work from engineering drawings. MIG/MAG Experience Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
GI Group are looking for an experienced MIG and TIG welder for our client based in St Annes. Working both independently and as part of a team, the MIG and TIG Welder operates a variety of metal materials ranging from thin gauge to medium heavy plate machinery to produce metal materials, ensuring high quality standards and meeting production targets. Job details: Monday - Thursday 37 hours a week 15 Key Responsibilities: Maintaining high quality standards at all times for standard and bespoke products Proactive communication with supervisors, managers and Quality Control regarding production, quality and H&S issues. Maintaining a clean and tidy work area Maintaining H&S standards following instructions and wearing of appropriate PPE General Requirements Previous experience of working in an engineering sheet metal production Regular quality checks Following internal processes Completing paperwork Understanding of basic IT Previous experience obtained in a manufacturing environment Practical awareness of lean manufacturing and understanding of 5S activities Ideally with experience of Mechanical presses, Spot welding with general understanding of sheet metal processing Understanding of Engineering drawings If you are interested please APPLY NOW or call (phone number removed) Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited and Grafton Professional Staffing Limited. We are committed to protecting the privacy of all of our candidates and clients. Following some recent changes to data protection laws we have updated our Privacy Policy. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group UK website.
Mar 28, 2024
Seasonal
GI Group are looking for an experienced MIG and TIG welder for our client based in St Annes. Working both independently and as part of a team, the MIG and TIG Welder operates a variety of metal materials ranging from thin gauge to medium heavy plate machinery to produce metal materials, ensuring high quality standards and meeting production targets. Job details: Monday - Thursday 37 hours a week 15 Key Responsibilities: Maintaining high quality standards at all times for standard and bespoke products Proactive communication with supervisors, managers and Quality Control regarding production, quality and H&S issues. Maintaining a clean and tidy work area Maintaining H&S standards following instructions and wearing of appropriate PPE General Requirements Previous experience of working in an engineering sheet metal production Regular quality checks Following internal processes Completing paperwork Understanding of basic IT Previous experience obtained in a manufacturing environment Practical awareness of lean manufacturing and understanding of 5S activities Ideally with experience of Mechanical presses, Spot welding with general understanding of sheet metal processing Understanding of Engineering drawings If you are interested please APPLY NOW or call (phone number removed) Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited and Grafton Professional Staffing Limited. We are committed to protecting the privacy of all of our candidates and clients. Following some recent changes to data protection laws we have updated our Privacy Policy. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group UK website.
About Optimas: Optimas is a global distributor of integrated supply chain solutions, and engineering support focused on delivering fasteners, components, industrial and safety supplies to our diverse customers around the world. Our local, on-the-ground teams understand the nuances of every community we serve. This allows us to adapt with our customers and partners as needs evolve, leveraging our footprint to remain at your side while providing a highly personalized level of service and support no matter where you find yourself around the globe. Position overview: Optimas is looking for an experienced Preventative Maintenance Technician on a permanent basis, to help the Company to achieve increased efficiency and productivity as well as responding to machine break downs as they happen. The role is designed to support the Production Department in all aspects of preventative and reactive maintenance with the focus being on reduction of machine downtime. The position is based at our state-of-the-art UK Manufacturing site in Droitwich. Main responsibilities: The Preventative Maintenance Technician will be responsible for: Carrying out routine PM programmes which have been accepted as PM Dept. s responsibility through liaison with Departmental Supervisors Carrying out emergency repairs to plant and equipment as a priority Some general machining, fitting and design Maintaining an adequate P.M. stores and records of P.M. work carried out within the Company s CMMS Communicate all problems and other work-related issues with supervisor Assisting with project work aimed at the continuous improvement of production plant and equipment and operational methods to achieve increasing productivity and zero defects Identifying cost savings, quality issues, production issues and Health and Safety concerns Key Competencies: The ideal candidate must have the following competencies: Strategic Vision. Building organizational capacity. Results driven. Embrace change. Collaboration and Influence. Entrepreneurial spirit. Customer value and Market focus. Skills and Qualifications: Eagerness to learn and develop a career within Preventative Maintenance All round hands-on practical experience/skill and success in production machinery maintenance (min 5 years), preferably in cold forging/fastener environment but at least with heavy industrial equipment A comprehensive knowledge of hydraulics, pneumatics, and lubrication systems is also necessary Fault detecting/repairs to mechanical, hydraulic & pneumatic machinery and equipment Sheet metal work/welding preferred Reading Engineering drawings & Technical drawings Good communicator and Team player Technically intuitive - Ability to learn new systems quickly
Mar 26, 2024
Full time
About Optimas: Optimas is a global distributor of integrated supply chain solutions, and engineering support focused on delivering fasteners, components, industrial and safety supplies to our diverse customers around the world. Our local, on-the-ground teams understand the nuances of every community we serve. This allows us to adapt with our customers and partners as needs evolve, leveraging our footprint to remain at your side while providing a highly personalized level of service and support no matter where you find yourself around the globe. Position overview: Optimas is looking for an experienced Preventative Maintenance Technician on a permanent basis, to help the Company to achieve increased efficiency and productivity as well as responding to machine break downs as they happen. The role is designed to support the Production Department in all aspects of preventative and reactive maintenance with the focus being on reduction of machine downtime. The position is based at our state-of-the-art UK Manufacturing site in Droitwich. Main responsibilities: The Preventative Maintenance Technician will be responsible for: Carrying out routine PM programmes which have been accepted as PM Dept. s responsibility through liaison with Departmental Supervisors Carrying out emergency repairs to plant and equipment as a priority Some general machining, fitting and design Maintaining an adequate P.M. stores and records of P.M. work carried out within the Company s CMMS Communicate all problems and other work-related issues with supervisor Assisting with project work aimed at the continuous improvement of production plant and equipment and operational methods to achieve increasing productivity and zero defects Identifying cost savings, quality issues, production issues and Health and Safety concerns Key Competencies: The ideal candidate must have the following competencies: Strategic Vision. Building organizational capacity. Results driven. Embrace change. Collaboration and Influence. Entrepreneurial spirit. Customer value and Market focus. Skills and Qualifications: Eagerness to learn and develop a career within Preventative Maintenance All round hands-on practical experience/skill and success in production machinery maintenance (min 5 years), preferably in cold forging/fastener environment but at least with heavy industrial equipment A comprehensive knowledge of hydraulics, pneumatics, and lubrication systems is also necessary Fault detecting/repairs to mechanical, hydraulic & pneumatic machinery and equipment Sheet metal work/welding preferred Reading Engineering drawings & Technical drawings Good communicator and Team player Technically intuitive - Ability to learn new systems quickly
For this role, we are recruiting for both early and late shifts (If you are available for both, it will increase your chance of success) Attention all Welders/fabricators! Purpose of your Role: Responsible for the fabrication assembly, including welding, sanding, and ensuring the fabrication meets all drawing and welding standards. Duties and Responsibilities: Adhere to the Job Pack information, including signing Job Pack forms. Assist the Works Supervisor and Lead Operative and mentors. Listen to the mentors and develop fabrication skills as required. Inform Works Supervisor, Lead Operative and mentors of any urgently required equipment. Inform Works Supervisor, Lead Operative of any manufacturing or quality concerns. Must be self-motivated, able to work under own initiative and meet production deadlines. Flexibility on working hours and practises, and overtime requirements to support business needs. To effectively maintain the tidiness, safety and cleanliness of the work areas (5s Standards) As required sign for the receipt of delivered goods, deliver goods to the required area, forward any signed paperwork to the Works Supervisor Working closely with the Manufacturing Team, Works Supervisor, Lead Operatives, mentors other Works Operatives and in addition the Applications Engineers, Contracts Engineer and Fabrication Engineering Manager at all times. Attend meetings as required/requested Comply with the requirements BS EN ISO 9001 quality system. Essential Qualifications/Experiences: 5 Years minimum fabrication & welding experience Experience in bespoke fabrication environment Ability to read and work from engineering drawings. MIG/MAG Experience Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Dec 06, 2023
Full time
For this role, we are recruiting for both early and late shifts (If you are available for both, it will increase your chance of success) Attention all Welders/fabricators! Purpose of your Role: Responsible for the fabrication assembly, including welding, sanding, and ensuring the fabrication meets all drawing and welding standards. Duties and Responsibilities: Adhere to the Job Pack information, including signing Job Pack forms. Assist the Works Supervisor and Lead Operative and mentors. Listen to the mentors and develop fabrication skills as required. Inform Works Supervisor, Lead Operative and mentors of any urgently required equipment. Inform Works Supervisor, Lead Operative of any manufacturing or quality concerns. Must be self-motivated, able to work under own initiative and meet production deadlines. Flexibility on working hours and practises, and overtime requirements to support business needs. To effectively maintain the tidiness, safety and cleanliness of the work areas (5s Standards) As required sign for the receipt of delivered goods, deliver goods to the required area, forward any signed paperwork to the Works Supervisor Working closely with the Manufacturing Team, Works Supervisor, Lead Operatives, mentors other Works Operatives and in addition the Applications Engineers, Contracts Engineer and Fabrication Engineering Manager at all times. Attend meetings as required/requested Comply with the requirements BS EN ISO 9001 quality system. Essential Qualifications/Experiences: 5 Years minimum fabrication & welding experience Experience in bespoke fabrication environment Ability to read and work from engineering drawings. MIG/MAG Experience Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Multi-skilled maintenance engineer required for a full-time night shift role in Henstridge, BA8. The role involves working within a team to inspect, fault find and repair production machinery and company facilities to maintain an efficient, productive and safe site. £40,000 - £45,000 per annum, depending on experience Sunday to Thursday 22.00 - 06.00 40 hours per week Overtime paid at time and a half Own transport is needed as public transport is not an option to get to the site 20 minutes commute by car from Wincanton, Shaftsbury, Mere, Gillingham, Sherborne Excellent employee benefits package including Annual salary reviews Performance appraisals and annual bonus scheme Additional opportunities for training and development Life insurance Length of service rewards Private medical healthcare Five additional days holiday after 12 months' service Eye care vouchers to those that specifically require it for their role Employee Assistance Programme About the job In house fabrication, maintenance including welding (mma, mag & mig), flame cutting, plasma cutting. Handling power tools including, but not limited to, abrasive wheels, plasma cutter, mag drills and punch Performing preventative maintenance routines and condition monitoring of production machinery and facilities as per the inspection schedules. Maintaining accurate records of findings and works carried out Liaising closely with the Maintenance Supervisor and operations staff in all aspects to ensure efficient, effective and planned reactive maintenance at all times Making safety inspections of tools and equipment Diagnosing faults and repairing machines in a safe manner to minimise downtime and cost Anticipating machine failures and making such changes or recommendations to prevent re-occurrence and to minimise downtime The right candidate City and Guilds/NVQ3/HNC/ in electrical mechanical Pneumatic and Hydraulic knowledge, along with PLC, inverter, instrumentation and control experience. Knowledge of various mechanical drive arrangements, including simplex, duplex, chain, belt, gearboxes and transmission equipment is required. You must hold a valid UK driving license and have experience in a heavy industrial environment. If you are interested in this role, please apply online or contact Pertemps Bridgwater office and speak to Richard Dearsley or George Fretwell
Dec 10, 2022
Full time
Multi-skilled maintenance engineer required for a full-time night shift role in Henstridge, BA8. The role involves working within a team to inspect, fault find and repair production machinery and company facilities to maintain an efficient, productive and safe site. £40,000 - £45,000 per annum, depending on experience Sunday to Thursday 22.00 - 06.00 40 hours per week Overtime paid at time and a half Own transport is needed as public transport is not an option to get to the site 20 minutes commute by car from Wincanton, Shaftsbury, Mere, Gillingham, Sherborne Excellent employee benefits package including Annual salary reviews Performance appraisals and annual bonus scheme Additional opportunities for training and development Life insurance Length of service rewards Private medical healthcare Five additional days holiday after 12 months' service Eye care vouchers to those that specifically require it for their role Employee Assistance Programme About the job In house fabrication, maintenance including welding (mma, mag & mig), flame cutting, plasma cutting. Handling power tools including, but not limited to, abrasive wheels, plasma cutter, mag drills and punch Performing preventative maintenance routines and condition monitoring of production machinery and facilities as per the inspection schedules. Maintaining accurate records of findings and works carried out Liaising closely with the Maintenance Supervisor and operations staff in all aspects to ensure efficient, effective and planned reactive maintenance at all times Making safety inspections of tools and equipment Diagnosing faults and repairing machines in a safe manner to minimise downtime and cost Anticipating machine failures and making such changes or recommendations to prevent re-occurrence and to minimise downtime The right candidate City and Guilds/NVQ3/HNC/ in electrical mechanical Pneumatic and Hydraulic knowledge, along with PLC, inverter, instrumentation and control experience. Knowledge of various mechanical drive arrangements, including simplex, duplex, chain, belt, gearboxes and transmission equipment is required. You must hold a valid UK driving license and have experience in a heavy industrial environment. If you are interested in this role, please apply online or contact Pertemps Bridgwater office and speak to Richard Dearsley or George Fretwell
Zenith People Limited are working with our client who are a Manufacturer looking to recruit an Experienced Shift Maintenance Technician on a permanent basis. Reporting to the Maintenance Supervisor and working as part of the site Maintenance team, you will be required to undertake all maintenance activities within the plant to ensure the efficient running of all plant equipment and machinery to world class standards. To maintain plant equipment and the Facility. Maintenance is a service department providing support to internal and external customers. PRINCIPAL ACCOUNTABILITIES Carry out reactive, planned, preventive & predictive maintenance tasks on plant equipment. To maintain and improve the site PPM (Planned Preventive Maintenance) schedule. To maintain and increase plant availability To record and communicate maintenance information via written, electronic & verbal means. To assist installation and commissioning of new equipment Suggests and takes ownership of continuous improvement activities to achieve results. Support customers (internal & external), including the identification and correction of machinery faults such as, electrical equipment, mechanical faults, PLC s, hydraulics and pneumatics To work within business guidelines and targets to achieve results. KNOWLEDGE AND EXPERIENCE Minimum of 2 years post qualified experience gained within a high-volume manufacturing environment. Experience of fault finding and RCA (Root Cause Analysis) Experience of Power Press equipment Fault finding and diagnostics on controls equipment, Drives, inverters & PLC s: Siemens Step 7 / TIA portal, etc. Fault finding and diagnostics on relay systems Experience of engineering hand tools; Test Equipment; Lifting and slinging equipment; Access equipment; General office equipment; Workshop machinery; Vibratory tools: i.e. Hand-held grinders and hammer action drilling machines. Experience of welding (MMA or MIG) Working knowledge of feedback systems e.g. Encoder Working knowledge of robotic systems / Automation Working knowledge of electrical heating systems Previous experience of TPM activities Working knowledge of chillers, compressors and plant utilities. Experience of machine installation and modification Experience of safety interlocking systems Ability to follow and fault find using electrical / hydraulic / pneumatic and engineering drawings Computer literate QUALIFICATIONS/SKILLS/REQUIREMENTS Time served maintenance technician Qualified to HNC level in Mechanical or Electrical Engineering or equivalent. Degree an advantage. IEE Regs (17th/18th Edition) desirable NEBOSH or IOSH desirable If you are an experienced Maintenance Technician and are interested in being considered for this role, please click apply now
Dec 09, 2022
Full time
Zenith People Limited are working with our client who are a Manufacturer looking to recruit an Experienced Shift Maintenance Technician on a permanent basis. Reporting to the Maintenance Supervisor and working as part of the site Maintenance team, you will be required to undertake all maintenance activities within the plant to ensure the efficient running of all plant equipment and machinery to world class standards. To maintain plant equipment and the Facility. Maintenance is a service department providing support to internal and external customers. PRINCIPAL ACCOUNTABILITIES Carry out reactive, planned, preventive & predictive maintenance tasks on plant equipment. To maintain and improve the site PPM (Planned Preventive Maintenance) schedule. To maintain and increase plant availability To record and communicate maintenance information via written, electronic & verbal means. To assist installation and commissioning of new equipment Suggests and takes ownership of continuous improvement activities to achieve results. Support customers (internal & external), including the identification and correction of machinery faults such as, electrical equipment, mechanical faults, PLC s, hydraulics and pneumatics To work within business guidelines and targets to achieve results. KNOWLEDGE AND EXPERIENCE Minimum of 2 years post qualified experience gained within a high-volume manufacturing environment. Experience of fault finding and RCA (Root Cause Analysis) Experience of Power Press equipment Fault finding and diagnostics on controls equipment, Drives, inverters & PLC s: Siemens Step 7 / TIA portal, etc. Fault finding and diagnostics on relay systems Experience of engineering hand tools; Test Equipment; Lifting and slinging equipment; Access equipment; General office equipment; Workshop machinery; Vibratory tools: i.e. Hand-held grinders and hammer action drilling machines. Experience of welding (MMA or MIG) Working knowledge of feedback systems e.g. Encoder Working knowledge of robotic systems / Automation Working knowledge of electrical heating systems Previous experience of TPM activities Working knowledge of chillers, compressors and plant utilities. Experience of machine installation and modification Experience of safety interlocking systems Ability to follow and fault find using electrical / hydraulic / pneumatic and engineering drawings Computer literate QUALIFICATIONS/SKILLS/REQUIREMENTS Time served maintenance technician Qualified to HNC level in Mechanical or Electrical Engineering or equivalent. Degree an advantage. IEE Regs (17th/18th Edition) desirable NEBOSH or IOSH desirable If you are an experienced Maintenance Technician and are interested in being considered for this role, please click apply now
Ready to find the right role for you? Salary: £35,000 - £42,000 per annum (depending on experience) plus company van and Veolia benefits Hours:40 hours per week, Monday to Friday, 8.00am - 4.30pm Location: Slough and around the South (Mobile position with some overnight stays) When you see the world as we do, you see the chance to help the world take better care of its resources, and help it become a better place for everyone. It's why we're looking for someone who sees the world in a similar way to take up an exciting role as a Mobile Mechanical Technician. This exciting opportunity has become available due to internal harmonisation within Veolia to establish an independent internal network to encourage internal optimisation and business growth. Because of our responsibility when it comes to leading change, resourcing takes every single one of us, and this is how you can play your part. And if you're an experienced mechanical technician this role will suit you perfectly. What will you be doing? Carry out work as per schedule supplied by the Services Manager and as per site policies, schedules and procedures. Troubleshoot problems with equipment as necessary, and as directed by site supervisors. Liaise with subcontractors during planned service maintenance. Carry out Risk Assessment of Equipment Maintenance Task List steps and ensure these are always kept up to date. Carry out periodic reviews of EWI/SOP to ensure documents are always current and valid. Flexibility to work on equipment within a regional location and work around Maintenance Shutdown's. Participate in Audits of the plant and follow up on actions. Drive local reviews of maintenance performance data using published maintenance excellence KPI results, areas that will be reviewed and improvements sought: - Spares cost - High levels of paperwork - Maintenance man-hours per equipment/system - Equipment reliability trends What are we looking for? Recognised trade qualification, Boiler Operation Accreditation Scheme (BOAS) or equivalent. Gas Safe Engineer, with experience of LTHW boilers, and Steam plant General mechanical qualifications and proven ability to work on mechanical utility systems Cutting welding, grinding and small fabrication experience Management of hot and cold commercial systems Legionella and water management is an advantage AHU & Chillers experience is also an advantage 2 years minimum experience in a similar role and good understanding of the basic fundamentals of the various utilities systems. Willingness to expand working knowledge into mechanical and electrical systems. Good understanding of Preventive Maintenance Systems. Work within a Computerised Maintenance Management Work Order system environment. Work within a documented Permit to Work System. Computer literate. Good Initiative and Proactive attitude in approach to duties. Full clean driving licence. Our promise to you Here at Veolia, we know that a genuinely good role goes both ways. So alongside your salary you'll get 25 days of holiday alongside an extensive benefits package, which includes our market-leading pension and share scheme, alongside a range of employee discounts. Also to help you further, we provide mental health and financial support, so you can lean on us whenever you need to. Apply today, so we can make a difference for generations to come. Here at Veolia, we're proud to be known as an equal opportunities employer. We know how important it is to be fully committed to building and maintaining a diverse and inclusive place to work for every one of our colleagues. So no matter their age, gender, gender expression, disability, race, ethnicity, religion, belief, sexuality or veteran status, every applicant who meets the minimum requirements will be considered fully.
Dec 07, 2022
Full time
Ready to find the right role for you? Salary: £35,000 - £42,000 per annum (depending on experience) plus company van and Veolia benefits Hours:40 hours per week, Monday to Friday, 8.00am - 4.30pm Location: Slough and around the South (Mobile position with some overnight stays) When you see the world as we do, you see the chance to help the world take better care of its resources, and help it become a better place for everyone. It's why we're looking for someone who sees the world in a similar way to take up an exciting role as a Mobile Mechanical Technician. This exciting opportunity has become available due to internal harmonisation within Veolia to establish an independent internal network to encourage internal optimisation and business growth. Because of our responsibility when it comes to leading change, resourcing takes every single one of us, and this is how you can play your part. And if you're an experienced mechanical technician this role will suit you perfectly. What will you be doing? Carry out work as per schedule supplied by the Services Manager and as per site policies, schedules and procedures. Troubleshoot problems with equipment as necessary, and as directed by site supervisors. Liaise with subcontractors during planned service maintenance. Carry out Risk Assessment of Equipment Maintenance Task List steps and ensure these are always kept up to date. Carry out periodic reviews of EWI/SOP to ensure documents are always current and valid. Flexibility to work on equipment within a regional location and work around Maintenance Shutdown's. Participate in Audits of the plant and follow up on actions. Drive local reviews of maintenance performance data using published maintenance excellence KPI results, areas that will be reviewed and improvements sought: - Spares cost - High levels of paperwork - Maintenance man-hours per equipment/system - Equipment reliability trends What are we looking for? Recognised trade qualification, Boiler Operation Accreditation Scheme (BOAS) or equivalent. Gas Safe Engineer, with experience of LTHW boilers, and Steam plant General mechanical qualifications and proven ability to work on mechanical utility systems Cutting welding, grinding and small fabrication experience Management of hot and cold commercial systems Legionella and water management is an advantage AHU & Chillers experience is also an advantage 2 years minimum experience in a similar role and good understanding of the basic fundamentals of the various utilities systems. Willingness to expand working knowledge into mechanical and electrical systems. Good understanding of Preventive Maintenance Systems. Work within a Computerised Maintenance Management Work Order system environment. Work within a documented Permit to Work System. Computer literate. Good Initiative and Proactive attitude in approach to duties. Full clean driving licence. Our promise to you Here at Veolia, we know that a genuinely good role goes both ways. So alongside your salary you'll get 25 days of holiday alongside an extensive benefits package, which includes our market-leading pension and share scheme, alongside a range of employee discounts. Also to help you further, we provide mental health and financial support, so you can lean on us whenever you need to. Apply today, so we can make a difference for generations to come. Here at Veolia, we're proud to be known as an equal opportunities employer. We know how important it is to be fully committed to building and maintaining a diverse and inclusive place to work for every one of our colleagues. So no matter their age, gender, gender expression, disability, race, ethnicity, religion, belief, sexuality or veteran status, every applicant who meets the minimum requirements will be considered fully.
Site Installer Based Flintshire Installing UK Wide Full Time £30,000 + including overtime and Travel allowance With over 35 years of knowledge, and is one of the leading odour control companies in the UK, our client is experienced in dealing with odours from Waste-Water Treatment Facilities, Landfill and Waste Disposal Sites, Food Processing, Industry, etc., and are approved suppliers to all major UK Water Companies and many Waste Management Companies. The company is an Equal Opportunities employer. This is an excellent opportunity to work at sites throughout the UK. You will also be provided with a company vehicle as well as all tools, and all expenses will be covered. Are you the right person for the job? The following cards are required, in some instances the company will pay for new carding: CSCS Confined Space IPAF Abrasive Wheels EUSR Face Fit Mask First Aid Manual Handling One Alliance Safety Passport PASMA Thames Water Passport Safety Harness Inspection Severn Trent Safety SSTS Supervisor Full clean driving license What will your role as a Site Installer look like? Majority of installations are within the Water Industry as well as Food Processors Most work is outside, although sometimes within a building Landing vessels and ductwork/fans onto a plinth and siting according to drawings Components are mainly HDPE (plastic) and no welding is required Connections are mainly via bolted flanges; some glassing may be required HIABS & on occasion cranes are used to land equipment You will be responsible for working to RAMS You must attend site H&S meetings Clean & Clear all materials and tools at all times PPE is to be worn at all times according to site rules Manage day to day work processes and adhere to the scope of drawings etc Ensure all documentation is completed and available at all times Liaise with the Project Manager on the status of works and photograph all elements of stages of work and completed installations Responsible for site safety of all co-workers in the team Must be a team worker You will be willing to work away with overnight stays What's next? It's easy! Click "APPLY" now! We can't wait to hear from you! Talent Finder is an advertising agency. Once you have submitted your application it will be passed to the third-party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm to whom your application has been forwarded to.
Dec 06, 2022
Full time
Site Installer Based Flintshire Installing UK Wide Full Time £30,000 + including overtime and Travel allowance With over 35 years of knowledge, and is one of the leading odour control companies in the UK, our client is experienced in dealing with odours from Waste-Water Treatment Facilities, Landfill and Waste Disposal Sites, Food Processing, Industry, etc., and are approved suppliers to all major UK Water Companies and many Waste Management Companies. The company is an Equal Opportunities employer. This is an excellent opportunity to work at sites throughout the UK. You will also be provided with a company vehicle as well as all tools, and all expenses will be covered. Are you the right person for the job? The following cards are required, in some instances the company will pay for new carding: CSCS Confined Space IPAF Abrasive Wheels EUSR Face Fit Mask First Aid Manual Handling One Alliance Safety Passport PASMA Thames Water Passport Safety Harness Inspection Severn Trent Safety SSTS Supervisor Full clean driving license What will your role as a Site Installer look like? Majority of installations are within the Water Industry as well as Food Processors Most work is outside, although sometimes within a building Landing vessels and ductwork/fans onto a plinth and siting according to drawings Components are mainly HDPE (plastic) and no welding is required Connections are mainly via bolted flanges; some glassing may be required HIABS & on occasion cranes are used to land equipment You will be responsible for working to RAMS You must attend site H&S meetings Clean & Clear all materials and tools at all times PPE is to be worn at all times according to site rules Manage day to day work processes and adhere to the scope of drawings etc Ensure all documentation is completed and available at all times Liaise with the Project Manager on the status of works and photograph all elements of stages of work and completed installations Responsible for site safety of all co-workers in the team Must be a team worker You will be willing to work away with overnight stays What's next? It's easy! Click "APPLY" now! We can't wait to hear from you! Talent Finder is an advertising agency. Once you have submitted your application it will be passed to the third-party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm to whom your application has been forwarded to.
Permanent contractDays 06:00 - 14:30 Mids 14:00 - 22:30Salary £40kOvertime is paid at time & halfNight shift allowanceBonus schemeTHE BUSINESSWestray Recruitment Group is seeking an experienced Maintenance Shift Supervisor to work a 2-shift pattern on a permanent contract. This role is based in the Durham area. The position will see you work within a high-volume manufacturing environment.The business is family owned and its roots stretch back over 180 years. They are an international business and they are going through an incredible period of growth both through market demand and via acquisition. The business places people at the forefront of the organisation and has developed a strong reputation for both rewarding employees and promoting from within.The business employees over 1250 staff across multiple sites throughout the UK. The site at Gateshead has received well over £4 million of investment in recent weeks, through the installation of new state of the art production lines and new machinery. This is a great opportunity to join a forward-thinking business who are a true market leader.THE ROLEYou will be responsible for the efficient and effective organisation of a small team of engineers.Reporting to the Site Manger / Group Maintenance manager, you will be responsible for planning and distributing tasks to ensure planned maintenance is achieved for the mills to run effectively.To work safely at all times complying with and using (safe systems of work using permit systems, method statement, dynamic risk assessments ).To efficiently and effectively fault find / diagnose technical / process issuesTo coordinate and cooperate with production supervision on a day-to-day basis to ensure smooth running of plant and equipmentTo resolve breakdown issues with minimal impact to production.To identify process and equipment improvement opportunities (maintenance schedules and equipment capability / reliability).To be flexible in attendance to complete activities.To follow instructions provided by site management / supervisors.To maintain a clean and tidy work area at all times.To be a proactive team member.Improving technical skills and knowledge at all times.To be IT competent and be able to complete shift reports detailing all relevant information to ensure continuation and / or review of repair.Some overtime working is expectedTo have some fabrication / welding skillsTECHNICAL RESPONSIBILITIES / REQUIREMENTSAbility to interpret electrical drawings.Fault finding skills on automation systems.Experience with AC/DC drives.Understanding of PLC's.18thedition IEE reg's Desirable.Able to test & inspect fixed wiring & equipment installations.Cable & Containment selection experience.Install, Build/rebuild of equipment projects.Site & equipment (electrical) responsibility.THE PERSONRecognised engineering apprenticeship or similar qualification.3 - 5 years' engineering experience gained working within a manufacturing environment.Experience in PPM and fault finding on hydraulics and pneumatics systems on modern machinery and equipment.Electrical knowledgeUsing computer systems.Sound maintenance / engineering experience in a production environment, ideally a heavy engineering environment.THE PACKAGEPermanent contractDays 06:00 - 14:30 Mids 14:00 - 22:30Salary £40kOvertime is paid at time & halfNight shift allowanceBonus schemeTO APPLYPlease apply for this position and your CV will go direct to our Engineering Consultant Neil Douthwaite who is leading the search. Alternatively, if you have any questions, please get in touch with Neil at Westray Recruitment Group
Dec 01, 2022
Full time
Permanent contractDays 06:00 - 14:30 Mids 14:00 - 22:30Salary £40kOvertime is paid at time & halfNight shift allowanceBonus schemeTHE BUSINESSWestray Recruitment Group is seeking an experienced Maintenance Shift Supervisor to work a 2-shift pattern on a permanent contract. This role is based in the Durham area. The position will see you work within a high-volume manufacturing environment.The business is family owned and its roots stretch back over 180 years. They are an international business and they are going through an incredible period of growth both through market demand and via acquisition. The business places people at the forefront of the organisation and has developed a strong reputation for both rewarding employees and promoting from within.The business employees over 1250 staff across multiple sites throughout the UK. The site at Gateshead has received well over £4 million of investment in recent weeks, through the installation of new state of the art production lines and new machinery. This is a great opportunity to join a forward-thinking business who are a true market leader.THE ROLEYou will be responsible for the efficient and effective organisation of a small team of engineers.Reporting to the Site Manger / Group Maintenance manager, you will be responsible for planning and distributing tasks to ensure planned maintenance is achieved for the mills to run effectively.To work safely at all times complying with and using (safe systems of work using permit systems, method statement, dynamic risk assessments ).To efficiently and effectively fault find / diagnose technical / process issuesTo coordinate and cooperate with production supervision on a day-to-day basis to ensure smooth running of plant and equipmentTo resolve breakdown issues with minimal impact to production.To identify process and equipment improvement opportunities (maintenance schedules and equipment capability / reliability).To be flexible in attendance to complete activities.To follow instructions provided by site management / supervisors.To maintain a clean and tidy work area at all times.To be a proactive team member.Improving technical skills and knowledge at all times.To be IT competent and be able to complete shift reports detailing all relevant information to ensure continuation and / or review of repair.Some overtime working is expectedTo have some fabrication / welding skillsTECHNICAL RESPONSIBILITIES / REQUIREMENTSAbility to interpret electrical drawings.Fault finding skills on automation systems.Experience with AC/DC drives.Understanding of PLC's.18thedition IEE reg's Desirable.Able to test & inspect fixed wiring & equipment installations.Cable & Containment selection experience.Install, Build/rebuild of equipment projects.Site & equipment (electrical) responsibility.THE PERSONRecognised engineering apprenticeship or similar qualification.3 - 5 years' engineering experience gained working within a manufacturing environment.Experience in PPM and fault finding on hydraulics and pneumatics systems on modern machinery and equipment.Electrical knowledgeUsing computer systems.Sound maintenance / engineering experience in a production environment, ideally a heavy engineering environment.THE PACKAGEPermanent contractDays 06:00 - 14:30 Mids 14:00 - 22:30Salary £40kOvertime is paid at time & halfNight shift allowanceBonus schemeTO APPLYPlease apply for this position and your CV will go direct to our Engineering Consultant Neil Douthwaite who is leading the search. Alternatively, if you have any questions, please get in touch with Neil at Westray Recruitment Group
Description and requirements We are looking for a Commercial Gas and Heating Technician to join our building services team at Northwood HQ. Working as part of the maintenance team, the Commercial Gas and Heating Technician will ensure compliance with the Gas Safety regulations for the site wide commercial gas fired installations and associated heating and hot water installations, building services plant and equipment, as delegated by the Engineering Supervisors / Managers in support of the maintenance of the site under the terms of the Northwood PFI contract. You'll: Perform PPM, statutory compliance tasks and reactive works investigations/repairs on, but not limited to, the commercial gas fired systems on site Service, test, diagnose and repair process control systems and automatic control devices related to the building services gas fired plant and equipment Carry out tasks associated with L8 compliance for the prevention and control of legionella risks Liaise / assist with other services as necessary for the efficient delivery of work activities, workmanship and productivity to comply with the performance standards Must be able to obtain and maintain a Government Security Clearance of at least SC level Use provided test and monitoring equipment for the purpose of maintaining engineering system operational performance and to aid fault diagnostics and repair, i nterrogate and adjust systems to maintain correct operation of plant and equipment Carry out repairs, modifications and installations of plumbing, heating systems and hot/cold water services in copper, plastic, mdpe, black iron and galvanised pipe using soldering, braising, welding, pressfit and compression methods of fitting We are looking for: Essential NVQ Level 3 or equivalent (including recognised apprenticeship) with a commercial gas / heating bias Gas Safe registered for commercial gas installation Hold the following: COCN1, CIGA1, CORT1, TPCP1/1A, CPA1, CCCN1, COMCAT1, MET4 Maintenance and set up of gas fired burners Maintenance of gas pressure regulator installations (PRIs) Experience in a similar role on an MOD site Working knowledge of other building services and trades Must be able to fully satisfy the Client security clearance minimum requirements (SC) Desirable Gas Safe registered for catering and domestic installations L8 awareness and experience Over 5 years' experience of Engineering Services Maintenance Work experience in a MOD environment and compliance with MOD Safe Systems of Work (JSP375, Vol 3) Equal opportunities We thrive through embracing differences, whether they be social backgrounds, ethnicity, disability, gender identity or expression, age, religion, sexual orientation and any other protected characteristic - we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it Naturally Skanska. Flexible working We welcome you to ask about flexibility at interview stage and we will explore what is possible for the role. Reasonable adjustments We would like you to perform at your best at every stage of our recruitment process. Please contact us using if you require any adjustments that would support you throughout your application. More information about the role Please note this is an advert for our job vacancy, and therefore may not be inclusive of all assigned duties, responsibilities, or aspects of the role described, and may be amended at any time at the sole discretion of Skanska. For a full role profile, please contact us: Closing date The closing date for this vacancy may be subject to change any time at the sole discretion of the business.
Sep 21, 2022
Full time
Description and requirements We are looking for a Commercial Gas and Heating Technician to join our building services team at Northwood HQ. Working as part of the maintenance team, the Commercial Gas and Heating Technician will ensure compliance with the Gas Safety regulations for the site wide commercial gas fired installations and associated heating and hot water installations, building services plant and equipment, as delegated by the Engineering Supervisors / Managers in support of the maintenance of the site under the terms of the Northwood PFI contract. You'll: Perform PPM, statutory compliance tasks and reactive works investigations/repairs on, but not limited to, the commercial gas fired systems on site Service, test, diagnose and repair process control systems and automatic control devices related to the building services gas fired plant and equipment Carry out tasks associated with L8 compliance for the prevention and control of legionella risks Liaise / assist with other services as necessary for the efficient delivery of work activities, workmanship and productivity to comply with the performance standards Must be able to obtain and maintain a Government Security Clearance of at least SC level Use provided test and monitoring equipment for the purpose of maintaining engineering system operational performance and to aid fault diagnostics and repair, i nterrogate and adjust systems to maintain correct operation of plant and equipment Carry out repairs, modifications and installations of plumbing, heating systems and hot/cold water services in copper, plastic, mdpe, black iron and galvanised pipe using soldering, braising, welding, pressfit and compression methods of fitting We are looking for: Essential NVQ Level 3 or equivalent (including recognised apprenticeship) with a commercial gas / heating bias Gas Safe registered for commercial gas installation Hold the following: COCN1, CIGA1, CORT1, TPCP1/1A, CPA1, CCCN1, COMCAT1, MET4 Maintenance and set up of gas fired burners Maintenance of gas pressure regulator installations (PRIs) Experience in a similar role on an MOD site Working knowledge of other building services and trades Must be able to fully satisfy the Client security clearance minimum requirements (SC) Desirable Gas Safe registered for catering and domestic installations L8 awareness and experience Over 5 years' experience of Engineering Services Maintenance Work experience in a MOD environment and compliance with MOD Safe Systems of Work (JSP375, Vol 3) Equal opportunities We thrive through embracing differences, whether they be social backgrounds, ethnicity, disability, gender identity or expression, age, religion, sexual orientation and any other protected characteristic - we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it Naturally Skanska. Flexible working We welcome you to ask about flexibility at interview stage and we will explore what is possible for the role. Reasonable adjustments We would like you to perform at your best at every stage of our recruitment process. Please contact us using if you require any adjustments that would support you throughout your application. More information about the role Please note this is an advert for our job vacancy, and therefore may not be inclusive of all assigned duties, responsibilities, or aspects of the role described, and may be amended at any time at the sole discretion of Skanska. For a full role profile, please contact us: Closing date The closing date for this vacancy may be subject to change any time at the sole discretion of the business.
Engineering Team Leader Basingstoke £17ph - £17.50ph + 25% shift 2 Weekends away a month on average Overtime regularly available Pool car when travelling to site 8am - 4:30pm when in workshop Our client, a Manufacturing & Maintenance business serving the food processing industry are currently looking for an experienced Senior field service engineer to lead a small team of engineers. Senior Field Service Engineer duties: As a Senior Field Service Engineer, you will be an integral part of the business. You will be required to lead a small team (2/3 engineers) with on-site visits for maintenance and/or repair work. This will be a hands-on position so some experience with toolroom equipment (Welding, fabrication, machining etc) would be advantageous. Working on a shift pattern you will be required to travel frequently with overnight stays. An individual training plan will be developed to improve all required skills. Senior Field Service Engineer Knowledge and Experience: It is ESSENTIAL to have a valid driving license in order to apply for this position Required: Driving license (ESSENTIAL) Experience leading a team of engineers, ideally with on-site supervisory experience IT skills including MS Excel, Word, Powerpoint, Outlook. Experience withing a maintenance or Field service position Positive attitude with a "can do" approach to work. Desirable: Time served apprenticeship or equivalent qualification. Working at height. COSHH awareness. First Aid Knowledge and experience of Health and Safety in particular, food hygiene. Food industry knowledge. Forklift truck license. IPAF 3a license. Lifting and slinging. Willingness to Travel nationwide as part of a team on a shift pattern. If you think you have the skills necessary to be a success in this role, please click apply. For any additional information get in touch Syntech Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job you accept our T&C's, Privacy Policy and Disclaimers which can be found on our website
Dec 07, 2021
Full time
Engineering Team Leader Basingstoke £17ph - £17.50ph + 25% shift 2 Weekends away a month on average Overtime regularly available Pool car when travelling to site 8am - 4:30pm when in workshop Our client, a Manufacturing & Maintenance business serving the food processing industry are currently looking for an experienced Senior field service engineer to lead a small team of engineers. Senior Field Service Engineer duties: As a Senior Field Service Engineer, you will be an integral part of the business. You will be required to lead a small team (2/3 engineers) with on-site visits for maintenance and/or repair work. This will be a hands-on position so some experience with toolroom equipment (Welding, fabrication, machining etc) would be advantageous. Working on a shift pattern you will be required to travel frequently with overnight stays. An individual training plan will be developed to improve all required skills. Senior Field Service Engineer Knowledge and Experience: It is ESSENTIAL to have a valid driving license in order to apply for this position Required: Driving license (ESSENTIAL) Experience leading a team of engineers, ideally with on-site supervisory experience IT skills including MS Excel, Word, Powerpoint, Outlook. Experience withing a maintenance or Field service position Positive attitude with a "can do" approach to work. Desirable: Time served apprenticeship or equivalent qualification. Working at height. COSHH awareness. First Aid Knowledge and experience of Health and Safety in particular, food hygiene. Food industry knowledge. Forklift truck license. IPAF 3a license. Lifting and slinging. Willingness to Travel nationwide as part of a team on a shift pattern. If you think you have the skills necessary to be a success in this role, please click apply. For any additional information get in touch Syntech Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job you accept our T&C's, Privacy Policy and Disclaimers which can be found on our website
J. Murphy & Sons Limited is a leading global, specialist engineering and construction company founded in 1951 that improves lives by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and Canada, we provide better engineered solutions to infrastructure sectors including transportation; water; power; natural resources; and construction & property.Headquartered in London, we also have a number of related businesses - Ground Engineering; Utility Connections; Murphy Plant; Urban Infrastructure; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. We are specialists in delivering pipelines; design; marine; structural steel; tunnelling; fabrication; bridges and piling; and invest heavily in our substantial holding of plant; equipment and facilities. Mobile Plant Technician - Hemel Hempstead Murphy Group is hiring for our new Plant Depot in Hemel Hempstead. As part of an expansion of our plant facilities we have developed a brand new state of the art facilities. Do you have experience as a plant technician and are you looking for a new challenge? If so Murphy Group would like to hear from you. The Role * To undertake assigned activities under the direction of your Supervisor * Be enthusiastic and committed to the team's purpose and share responsibility for performance * Ensure all work is completed to the appropriate levels of safety, quality and cost * Producing the deliverables/products to agreed specifications * To take care of any safety equipment / tools provided and ensure they are used correctly * Work as part of a team & contribute towards successful communication & positive Your Profile * Experience performing the role of a plant operative * Involvement in delivering health and safety talks to a medium sized group * Occasionally operating large plant with complex health and safety requirements * Good team work * CSCS card * NVQ3 or equivalent or job specific experience/knowledge, 3-5 years. * Full, clean UK driver's license
Dec 01, 2021
Full time
J. Murphy & Sons Limited is a leading global, specialist engineering and construction company founded in 1951 that improves lives by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and Canada, we provide better engineered solutions to infrastructure sectors including transportation; water; power; natural resources; and construction & property.Headquartered in London, we also have a number of related businesses - Ground Engineering; Utility Connections; Murphy Plant; Urban Infrastructure; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. We are specialists in delivering pipelines; design; marine; structural steel; tunnelling; fabrication; bridges and piling; and invest heavily in our substantial holding of plant; equipment and facilities. Mobile Plant Technician - Hemel Hempstead Murphy Group is hiring for our new Plant Depot in Hemel Hempstead. As part of an expansion of our plant facilities we have developed a brand new state of the art facilities. Do you have experience as a plant technician and are you looking for a new challenge? If so Murphy Group would like to hear from you. The Role * To undertake assigned activities under the direction of your Supervisor * Be enthusiastic and committed to the team's purpose and share responsibility for performance * Ensure all work is completed to the appropriate levels of safety, quality and cost * Producing the deliverables/products to agreed specifications * To take care of any safety equipment / tools provided and ensure they are used correctly * Work as part of a team & contribute towards successful communication & positive Your Profile * Experience performing the role of a plant operative * Involvement in delivering health and safety talks to a medium sized group * Occasionally operating large plant with complex health and safety requirements * Good team work * CSCS card * NVQ3 or equivalent or job specific experience/knowledge, 3-5 years. * Full, clean UK driver's license
Company Description Mitie was founded in 1987, Mitie is the UK's leading facilities management and professional services company, looking after a large, diverse, blue-chip customer base, from banks and retailers, to hospitals, schools and government offices. Mitie has over 77,000 people, 100+ office locations, and thousands of customers across the country, there's no limit to what you can achieve if you work for us. Job Description This is a field based position covering South London. Responsible for the day-to-day supervision of M&E/civil PPM activities delivered by Interserve engineering teams and specialist sub-contractors/service providers. Also responsible for the welfare, direct management and administrative processes to support employees within the delivery team. Responsibilities Programme Management Responsible for the delivery of planned and reactive works within area/cluster. Planning and co-ordination of works with management teams and supply chain. Support to incidental works and other new works projects. Ensure that information held on management information system (MIS) is accurate and timely. Employee Management Responsible for the administration and welfare of Interserve employees within the delivery team. Responsible for the performance management, absence management, recruitment, selection and development of staff. Ensure staff are trained to carry out works safely, efficiently and to standard. Networking Liaison with Client representatives and customers. Development of positive working relationships with specialist contractors and supply chain. Budget Management Provide accurate commercial data to ensure works are completed to time and budget. Performance Management Monitor performance and report accordingly. Produce performance measures to ensure that performance indicators, SLA's and contractual obligations are met if not exceeded Use of MIS to produce performance figures against contractual performance indicators. Quality Management Undertake quality audit of works in progress and completed. Support the Continuous Improvement (CI) programme and identify issues to drive forward contract development. Compliance & Fraud Fraud awareness. Responsible for ensuring compliance with relevant legislation, Health & Safety, Quality Assurance & Environment. Be aware of the business continuity plan for the part of the business you work in. Supply Chain Liaise, audit and manage the supply chain. Continuous review and assessment of supply chain partners to meet service needs. Qualifications Experience in a similar role with a proven track record in the effective management of planned programme of works and reactive works coordinating multi skilled work groups. Excellent people management skills while able to manage sub-contractors and supply chain. Fully conversant with current H&S legislation and process management systems. Understanding of asset management information systems together with remote monitoring integrated technology. Experience in the supervision of labour across diverse facilities within a multi-site portfolio. Previous experience working for public service sector client. Valid formal Health & Safety qualification e.g. IOSH. Holder of a full and valid driving licence. Flexible working, will be required to be available on a callout system. Qualified electrical and/or mechanical engineer ( BS7671 qualified, City & Guilds engr, ONC, building services, etc..) or equivalent. City and Guilds in Fitting No. 597 and Gas Arc Welding No. 599 or equivalent. Both commercially and financially aware. IT literate in MS Office. Sets and maintains very high standards of delivery - attention to detail essential. Effectively manages staff performance, provides regular and constructive feedback. Enables others to excel. Driven to complete tasks above expectations. Diligent, professional and intuitive. High degree of self motivation and dedication to achieving excellence. Able to interpret contract detail and implement requirements. Excellent communication skills. Excellent customer service skills. Additional Information Health and Safety responsibilities: Follow Group and company policies and procedures at all times; Report any apparent deficiencies in systems of work or equipment provided that may result in failure of service delivery or risk to health and safety or the environment; Use all work equipment and personal PPE properly and in accordance with training received; Report any issues or training needs to your Line manager and /or via your divisional incident reporting system; Information Security: Ensure compliance with Mitie's information security procedures in all activities; Proactively identify and report security risks to your manager; Report actual and suspected security incidents; Note: This job description Is intended to give the post holder an appreciation of the role envisaged for this position and the range of duties undertaken. Specific tasks and objectives will be agreed with the post holder throughout the period of employment. The job description may be varied from time to time by the Company to reflect changes in the post holder's role and/or the needs of the business.
Dec 01, 2021
Full time
Company Description Mitie was founded in 1987, Mitie is the UK's leading facilities management and professional services company, looking after a large, diverse, blue-chip customer base, from banks and retailers, to hospitals, schools and government offices. Mitie has over 77,000 people, 100+ office locations, and thousands of customers across the country, there's no limit to what you can achieve if you work for us. Job Description This is a field based position covering South London. Responsible for the day-to-day supervision of M&E/civil PPM activities delivered by Interserve engineering teams and specialist sub-contractors/service providers. Also responsible for the welfare, direct management and administrative processes to support employees within the delivery team. Responsibilities Programme Management Responsible for the delivery of planned and reactive works within area/cluster. Planning and co-ordination of works with management teams and supply chain. Support to incidental works and other new works projects. Ensure that information held on management information system (MIS) is accurate and timely. Employee Management Responsible for the administration and welfare of Interserve employees within the delivery team. Responsible for the performance management, absence management, recruitment, selection and development of staff. Ensure staff are trained to carry out works safely, efficiently and to standard. Networking Liaison with Client representatives and customers. Development of positive working relationships with specialist contractors and supply chain. Budget Management Provide accurate commercial data to ensure works are completed to time and budget. Performance Management Monitor performance and report accordingly. Produce performance measures to ensure that performance indicators, SLA's and contractual obligations are met if not exceeded Use of MIS to produce performance figures against contractual performance indicators. Quality Management Undertake quality audit of works in progress and completed. Support the Continuous Improvement (CI) programme and identify issues to drive forward contract development. Compliance & Fraud Fraud awareness. Responsible for ensuring compliance with relevant legislation, Health & Safety, Quality Assurance & Environment. Be aware of the business continuity plan for the part of the business you work in. Supply Chain Liaise, audit and manage the supply chain. Continuous review and assessment of supply chain partners to meet service needs. Qualifications Experience in a similar role with a proven track record in the effective management of planned programme of works and reactive works coordinating multi skilled work groups. Excellent people management skills while able to manage sub-contractors and supply chain. Fully conversant with current H&S legislation and process management systems. Understanding of asset management information systems together with remote monitoring integrated technology. Experience in the supervision of labour across diverse facilities within a multi-site portfolio. Previous experience working for public service sector client. Valid formal Health & Safety qualification e.g. IOSH. Holder of a full and valid driving licence. Flexible working, will be required to be available on a callout system. Qualified electrical and/or mechanical engineer ( BS7671 qualified, City & Guilds engr, ONC, building services, etc..) or equivalent. City and Guilds in Fitting No. 597 and Gas Arc Welding No. 599 or equivalent. Both commercially and financially aware. IT literate in MS Office. Sets and maintains very high standards of delivery - attention to detail essential. Effectively manages staff performance, provides regular and constructive feedback. Enables others to excel. Driven to complete tasks above expectations. Diligent, professional and intuitive. High degree of self motivation and dedication to achieving excellence. Able to interpret contract detail and implement requirements. Excellent communication skills. Excellent customer service skills. Additional Information Health and Safety responsibilities: Follow Group and company policies and procedures at all times; Report any apparent deficiencies in systems of work or equipment provided that may result in failure of service delivery or risk to health and safety or the environment; Use all work equipment and personal PPE properly and in accordance with training received; Report any issues or training needs to your Line manager and /or via your divisional incident reporting system; Information Security: Ensure compliance with Mitie's information security procedures in all activities; Proactively identify and report security risks to your manager; Report actual and suspected security incidents; Note: This job description Is intended to give the post holder an appreciation of the role envisaged for this position and the range of duties undertaken. Specific tasks and objectives will be agreed with the post holder throughout the period of employment. The job description may be varied from time to time by the Company to reflect changes in the post holder's role and/or the needs of the business.
J. Murphy & Sons Limited is a leading global, specialist engineering and construction company founded in 1951 that improves lives by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and Canada, we provide better engineered solutions to infrastructure sectors including Transportation, Water, Power, Natural Resources, and Construction & Property. Headquartered in London, we also have a number of related businesses - Ground Engineering; Utility Connections; Murphy Plant; Urban Infrastructure; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. We are specialists in delivering pipelines; design; marine; structural steel; tunnelling; fabrication; bridges and piling; and invest heavily in our substantial holding of plant; equipment and facilities. Murphy employs around 3,500 engineers, professional managers and skilled operatives around the world. Together, we work as 'One Murphy' by directly delivering the people, plant and expertise needed to make projects a success. There's more to Murphy. Senior Engineer - Midlands We are looking for a competent Senior Engineer to join our transportation business unit. Must have experience in rail earthworks and drainage to support delivery across our CP6 North West & Central framework contract for Network Rail. This is a super team and a large and complex project. If you are looking for your next challenege this could be just for you.... What you will be doing * Supervise assistant and site engineers * Accurate setting out of the works and dimensional control. * Resolving technical problems at all levels and following up with TQ's where necessary. * Carry out inspections in accordance with the Inspection and Test Plan in a timely manner. * The production of survey information, labelled productivity photos and redline drawings for the completion of the As-built records. * Monitor the work under their control to ensure that any unsafe work conditions and non-compliance with Company policies and procedures are promptly remedied. * Maintain good working relations with client / designer / Team, together with our supply chain. * Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. * Communicate with foremen and supervisors to ensure full understanding of information provided. * Overseeing the selection and requisition of materials and plant for the use in the construction process. * Prepare written risk assessments and method statements for the control of the works. * Keep a full and accurate daily site diary, including any changes/variations, subcontractors attendance, and records of work related discussions with client / designer / project team. * Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality. * Mirror the Murphy Values of Safety, Leadership, Integrity and Respect in all behaviours. * Actively promote and embed Equality, Diversity and Inclusion (EDI) in all your work and support and comply with all organisational initiatives, policies and procedures on EDI. Who we are looking for * Minimum 5 years' experience including experience working on railway projects, preferably with earthworks and drainage experience. * Highly competent in surveying and setting out techniques * Willingness to travel throughout the North West and Central region * Capable of mentoring and leading a team of engineers * Ability and confidence to communicate and present to senior management * Capable of discuss engineering issues and identifying solutions. * An understanding of the commercial issues in undertaking a construction project. * Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. * PTS Qualified * CSCS Card (relevant type) * Full clean UK driving license
Dec 01, 2021
Full time
J. Murphy & Sons Limited is a leading global, specialist engineering and construction company founded in 1951 that improves lives by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and Canada, we provide better engineered solutions to infrastructure sectors including Transportation, Water, Power, Natural Resources, and Construction & Property. Headquartered in London, we also have a number of related businesses - Ground Engineering; Utility Connections; Murphy Plant; Urban Infrastructure; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. We are specialists in delivering pipelines; design; marine; structural steel; tunnelling; fabrication; bridges and piling; and invest heavily in our substantial holding of plant; equipment and facilities. Murphy employs around 3,500 engineers, professional managers and skilled operatives around the world. Together, we work as 'One Murphy' by directly delivering the people, plant and expertise needed to make projects a success. There's more to Murphy. Senior Engineer - Midlands We are looking for a competent Senior Engineer to join our transportation business unit. Must have experience in rail earthworks and drainage to support delivery across our CP6 North West & Central framework contract for Network Rail. This is a super team and a large and complex project. If you are looking for your next challenege this could be just for you.... What you will be doing * Supervise assistant and site engineers * Accurate setting out of the works and dimensional control. * Resolving technical problems at all levels and following up with TQ's where necessary. * Carry out inspections in accordance with the Inspection and Test Plan in a timely manner. * The production of survey information, labelled productivity photos and redline drawings for the completion of the As-built records. * Monitor the work under their control to ensure that any unsafe work conditions and non-compliance with Company policies and procedures are promptly remedied. * Maintain good working relations with client / designer / Team, together with our supply chain. * Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. * Communicate with foremen and supervisors to ensure full understanding of information provided. * Overseeing the selection and requisition of materials and plant for the use in the construction process. * Prepare written risk assessments and method statements for the control of the works. * Keep a full and accurate daily site diary, including any changes/variations, subcontractors attendance, and records of work related discussions with client / designer / project team. * Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality. * Mirror the Murphy Values of Safety, Leadership, Integrity and Respect in all behaviours. * Actively promote and embed Equality, Diversity and Inclusion (EDI) in all your work and support and comply with all organisational initiatives, policies and procedures on EDI. Who we are looking for * Minimum 5 years' experience including experience working on railway projects, preferably with earthworks and drainage experience. * Highly competent in surveying and setting out techniques * Willingness to travel throughout the North West and Central region * Capable of mentoring and leading a team of engineers * Ability and confidence to communicate and present to senior management * Capable of discuss engineering issues and identifying solutions. * An understanding of the commercial issues in undertaking a construction project. * Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. * PTS Qualified * CSCS Card (relevant type) * Full clean UK driving license